VariMill™ Chip Splitter • Series 572T • Radiused • 5 Flute • Cylindrical Shank • Inch

Name: VariMill™ Chip Splitter • Series 572T • Radiused • 5 Flute • Cylindrical Shank • Inch
SKU: 6853762

Series 572T • Radiused • 5 Flutes • Cylindrical Shank • Inch

Metric

Inch

SAP-Materialnummer	6853762
ISO Katalognummer	572TE2502ARET
ANSI Katalognummer	572TE2502ARET
Sorte	WP15PE
Aufnahmeart Maschinenseite	Straight-Cylindrical
[Re] Eckenradius	0.7620 mm
[Re] Eckenradius	.0300 in
[Z] Anzahl der Spannuten	5
[D1] Effektiver Schneidendurchmesser	25.4000 mm
[D1] Effektiver Schneidendurchmesser	1.000 in
[D] Adapter/Schaft/Bohrungsdurchmesser	25.4 mm
[D] Adapter/Schaft/Bohrungsdurchmesser	1.0 in
[AP1MAX] 1. maximale Schnitttiefe	114.3000 mm
[AP1MAX] 1. maximale Schnitttiefe	4.500 in
[L] Gesamtlänge	190.5000 mm
[L] Gesamtlänge	7.500 in

See all Product Variants

Uses and application

Spiralförmiges Interpolieren
Schräg-Eintauchfräsen Ins Volle
Trochoidal Milling
Umfangfräsen/Schulterfräsen: Ebene Stirnfläche

Workpiece Materials

P Stahl

M Rostfreier Stahl

K Gusseisen

S Hochwarmfeste Legierungen

H Gehärtete Werkstoffe

Grades

WP15PE

Hartmetallschneidstoff mit einer dicken, prozessoptimierten PVD-Beschichtung mit einer höheren Verschleißfestigkeit Überragender Schutz vor Kolk-, Kerb- und Freiflächenverschleiß bei der Bearbeitung von nicht rostendem Stahl. Ausgezeichnete Leistung bei Härten von bis zu 52 HRC.

P Stahl

S Hochwarmfeste Legierungen

H Gehärtete Werkstoffe

K Gusseisen

M Rostfreier Stahl

Application Data • Series 570T - 571T - 572T • Side Milling • ae = 10% of D1 • 5 Flutes • Inch

		<="" td="">		<="" td="" />
		Frezowanie walcowe		WP15PE			Recommended feed per tooth (fz=IPT) for side milling at ae = 10% of D1
				Prędkość skrawania Vc SFM			D1 Średnica
Grupa materiałowa		ap	ae	min.	Początek	maks.	ułamek	3/8	1/2	5/8	3/4	1
P	0	ap max	0.1 x D1	880	1030	1180	IPT	.0034	.0039	.0048	.0054	.0059
	1	ap max	0.1 x D1	880	1030	1180	IPT	.0034	.0039	.0048	.0054	.0059
	2	ap max	0.1 x D1	830	990	1125	IPT	.0034	.0039	.0048	.0054	.0059
	3	ap max	0.1 x D1	710	830	954	IPT	.0024	.0033	.0041	.0048	.0054
	4	ap max	0.1 x D1	530	705	880	IPT	.0026	.0030	.0036	.0042	.0046
	5	ap max	0.1 x D1	350	470	590	IPT	.0023	.0026	.0033	.0038	.0043
	6	ap max	0.1 x D1	295	370	440	IPT	.0019	.0022	.0027	.0031	.0033
M	1	ap max	0.1 x D1	530	600	675	IPT	.0029	.0033	.0041	.0048	.0054
	2	ap max	0.1 x D1	350	405	465	IPT	.0023	.0026	.0033	.0038	.0043
	3	ap max	0.1 x D1	350	380	410	IPT	.0019	.0022	.0027	.0031	.0033
K	1	ap max	0.1 x D1	710	795	880	IPT	.0034	.0039	.0048	.0054	.0059
	2	ap max	0.1 x D1	650	740	820	IPT	.0029	.0033	.0041	.0048	.0054
	3	ap max	0.1 x D1	650	705	765	IPT	.0023	.0026	.0033	.0038	.0043
S	1	ap max	0.1 x D1	295	410	530	IPT	.0029	.0033	.0041	.0048	.0054
	2	ap max	0.1 x D1	145	190	235	IPT	.0015	.0018	.0022	.0026	.0029
	3	ap max	0.1 x D1	145	190	235	IPT	.0015	.0018	.0022	.0026	.0029
	4	ap max	0.1 x D1	295	320	350	IPT	.0021	.0024	.0030	.0035	.0039
H	1	ap max	0.1 x D1	470	640	820	IPT	.0026	.0030	.0036	.0042	.0046
	2	ap max	0.1 x D1	415	560	710	IPT	.0019	.0022	.0027	.0031	.0033

Application Data • Series 570T - 571T - 572T • Side Milling • ae = 5% of D1 • 5 Flutes • Inch

		<="" td="">		<="" td="" />
		Frezowanie walcowe		WP15PE			Recommended feed per tooth (fz=IPT) for side milling at ae = 5% of D1
				Prędkość skrawania Vc SFM			D1 Średnica
Grupa materiałowa		ap	ae	min.	Początek	maks.	ułamek	3/8	1/2	5/8	3/4	1
P	0	ap max	0.05 x D1	980	1145	1310	IPT	.0050	.0050	.0060	.0070	.0080
	1	ap max	0.05 x D1	980	1145	1310	IPT	.0050	.0050	.0060	.0070	.0080
	2	ap max	0.05 x D1	920	1100	1250	IPT	.0050	.0050	.0060	.0070	.0080
	3	ap max	0.05 x D1	790	920	1050	IPT	.0040	.0040	.0060	.0060	.0070
	4	ap max	0.05 x D1	590	785	980	IPT	.0030	.0040	.0050	.0060	.0060
	5	ap max	0.05 x D1	390	525	660	IPT	.0030	.0040	.0040	.0050	.0060
	6	ap max	0.05 x D1	330	410	490	IPT	.0030	.0030	.0040	.0040	.0050
M	1	ap max	0.05 x D1	590	670	750	IPT	.0040	.0040	.0060	.0060	.0070
	2	ap max	0.05 x D1	390	455	520	IPT	.0030	.0040	.0040	.0050	.0060
	3	ap max	0.05 x D1	390	425	460	IPT	.0030	.0030	.0040	.0040	.0050
K	1	ap max	0.05 x D1	790	885	980	IPT	.0050	.0050	.0060	.0070	.0080
	2	ap max	0.05 x D1	720	820	920	IPT	.0040	.0040	.0060	.0060	.0070
	3	ap max	0.05 x D1	720	785	850	IPT	.0030	.0040	.0040	.0050	.0060
S	1	ap max	0.05 x D1	330	460	590	IPT	.0040	.0040	.0060	.0060	.0070
	2	ap max	0.05 x D1	160	210	260	IPT	.0020	.0020	.0030	.0030	.0040
	3	ap max	0.05 x D1	160	210	260	IPT	.0020	.0020	.0030	.0030	.0040
	4	ap max	0.05 x D1	330	360	390	IPT	.0030	.0030	.0040	.0050	.0050
H	1	ap max	0.05 x D1	520	720	920	IPT	.0030	.0040	.0050	.0040	.0060
	2	ap max	0.05 x D1	460	625	790	IPT	.0030	.0030	.0040	.0040	.0050

Application Data • Series 570T - 571T - 572T • Side Milling • ae = 2% of D1 • 5 Flutes • Inch

Grupa materiałowa		<="" td="">		<="" td="" />
		Frezowanie walcowe		WP15PE			Recommended feed per tooth (fz=IPT) for side milling at ae = 2% of D1
				Prędkość skrawania Vc SFM			D1 Średnica
Grupa materiałowa		ap	ae	min.	Początek	maks.	ułamek	3/8	1/2	5/8	3/4	1
P	0	ap max	0.02 x D1	1000	1170	1330	IPT	.0070	.0080	.0090	.0011	.0110
	1	ap max	0.02 x D1	1000	1170	1330	IPT	.0070	.0080	.0090	.0011	.0110
	2	ap max	0.02 x D1	340	1120	1275	IPT	.0070	.0080	.0090	.0011	.0110
	3	ap max	0.02 x D1	805	940	1070	IPT	.0060	.0060	.0080	.0090	.0100
	4	ap max	0.02 x D1	600	800	1000	IPT	.0050	.0060	.0070	.0080	.0090
	5	ap max	0.02 x D1	400	535	670	IPT	.0040	.0050	.0060	.0070	.0080
	6	ap max	0.02 x D1	335	420	500	IPT	.0040	.0040	.0050	.0060	.0070
M	1	ap max	0.02 x D1	600	680	765	IPT	.0060	.0060	.0080	.0090	.0100
	2	ap max	0.02 x D1	400	460	530	IPT	.0040	.0050	.0060	.0070	.0080
	3	ap max	0.02 x D1	400	430	470	IPT	.0040	.0040	.0050	.0060	.0070
K	1	ap max	0.02 x D1	805	900	1000	IPT	.0070	.0080	.0090	.0110	.0110
	2	ap max	0.02 x D1	735	830	940	IPT	.0060	.0060	.0080	.0090	.0100
	3	ap max	0.02 x D1	735	800	860	IPT	.0040	.0050	.0060	.0070	.0080
S	1	ap max	0.02 x D1	330	470	600	IPT	.0060	.0060	.0080	.0090	.0100
	2	ap max	0.02 x D1	165	215	265	IPT	.0030	.0030	.0040	.0050	.0060
	3	ap max	0.02 x D1	165	215	265	IPT	.0030	.0030	.0040	.0050	.0060
	4	ap max	0.02 x D1	330	360	390	IPT	.0040	.0050	.0060	.0070	.0080
H	1	ap max	0.02 x D1	530	730	930	IPT	.0050	.0060	.0070	.0080	.0090
	2	ap max	0.02 x D1	470	630	800	IPT	.0040	.0040	.0050	.0060	.0070

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO Katalog	Grade

Product Suggestions

Product Family suggestions

Notifications

VariMill™ Chip Splitter • Series 572T • Radiused • 5 Flute • Cylindrical Shank • Inch