successfully added to cart
View Cart
COVID-19: Wie WIDIA reagiert

Hochleistungs-Gewindefräser

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (51)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (51)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (51)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (51)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (51)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (31)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (51)
  • M Stainless Steel (51)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (51)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (51)
  • K Cast Iron (51)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (51)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (51)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (51)
  • N Non-Ferrous Materials (51)
    • N1
      Wrought Aluminum
      (51)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (51)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (51)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (51)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (51)
    • N6
      Carbon, Graphite Composites, CFRP
      (51)
  • S High-Temp Alloys (51)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (51)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (51)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (51)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (51)
Applications
  • Thread Milling Thread Milling (51)
Cutting Diameter
  • 2.4 (1)
  • 3.15 (1)
  • 3.35 (1)
  • 3.8 (1)
  • 4.0 (2)
  • 4.3 (1)
  • 4.7 (1)
  • 4.8 (2)
  • 5.0 (2)
  • 5.15 (1)
  • 5.9 (3)
  • 6.15 (1)
  • 6.5 (1)
  • 6.6 (1)
  • 6.7 (1)
  • 7.65 (1)
  • 7.9 (2)
  • 8.2 (2)
  • 8.4 (1)
  • 8.7 (1)
  • 9.0 (1)
  • 9.55 (1)
  • 9.9 (4)
  • 10.1 (1)
  • 10.35 (1)
  • 10.4 (1)
  • 10.6 (1)
  • 11.1 (1)
  • 11.6 (2)
  • 11.8 (1)
  • 11.9 (2)
  • 12.1 (1)
  • 12.5 (1)
  • 13.1 (1)
  • 13.6 (1)
  • 13.9 (2)
  • 14.0 (1)
  • 14.1 (1)
to
Cutting Diameter
  • 0.0945 (1)
  • 0.124 (1)
  • 0.1319 (1)
  • 0.1496 (1)
  • 0.1575 (2)
  • 0.1693 (1)
  • 0.185 (1)
  • 0.189 (2)
  • 0.1969 (2)
  • 0.2028 (1)
  • 0.2323 (3)
  • 0.2421 (1)
  • 0.2559 (1)
  • 0.2598 (1)
  • 0.2638 (1)
  • 0.3012 (1)
  • 0.311 (2)
  • 0.3228 (2)
  • 0.3307 (1)
  • 0.3425 (1)
  • 0.3543 (1)
  • 0.376 (1)
  • 0.3898 (4)
  • 0.3976 (1)
  • 0.4075 (1)
  • 0.4094 (1)
  • 0.4173 (1)
  • 0.437 (1)
  • 0.4567 (2)
  • 0.4646 (1)
  • 0.4685 (2)
  • 0.4764 (1)
  • 0.4921 (1)
  • 0.5157 (1)
  • 0.5354 (1)
  • 0.5472 (2)
  • 0.5512 (1)
  • 0.5551 (1)
to
Cutting Length
  • 0.2457 (1)
  • 0.3244 (1)
  • 0.3437 (1)
  • 0.4031 (1)
  • 0.4244 (1)
  • 0.4866 (1)
  • 0.4913 (1)
  • 0.6472 (1)
  • 0.6626 (2)
  • 0.7969 (1)
  • 0.8055 (1)
  • 0.9634 (1)
  • 0.9728 (1)
  • 1.1402 (1)
  • 1.148 (1)
  • 1.2661 (1)
  • 1.2965 (1)
  • 1.5224 (1)
  • 1.6205 (1)
to
Cutting Length
  • 6.24 (1)
  • 8.24 (1)
  • 8.73 (1)
  • 10.24 (1)
  • 10.78 (1)
  • 12.36 (1)
  • 12.48 (1)
  • 16.44 (1)
  • 16.83 (2)
  • 20.24 (1)
  • 20.46 (1)
  • 24.47 (1)
  • 24.71 (1)
  • 28.96 (1)
  • 29.16 (1)
  • 32.16 (1)
  • 32.93 (1)
  • 38.67 (1)
  • 41.16 (1)
to
Type of Thread
  • M (16)
  • MF (20)
  • NC/UNC (7)
  • NF/UNF (8)
Reach
  • 6.5 (1)
  • 8.51 (1)
  • 9.07 (1)
  • 10.53 (1)
  • 11.16 (1)
  • 12.36 (1)
  • 12.48 (1)
  • 16.44 (1)
  • 16.83 (2)
  • 20.24 (1)
  • 20.46 (1)
  • 24.47 (1)
  • 24.71 (1)
  • 28.96 (1)
  • 29.16 (1)
  • 32.16 (1)
  • 32.93 (1)
  • 38.67 (1)
  • 41.16 (1)
to
Reach
  • 0.2559 (1)
  • 0.335 (1)
  • 0.3571 (1)
  • 0.4146 (1)
  • 0.4394 (1)
  • 0.4866 (1)
  • 0.4913 (1)
  • 0.6472 (1)
  • 0.6626 (2)
  • 0.7969 (1)
  • 0.8055 (1)
  • 0.9634 (1)
  • 0.9728 (1)
  • 1.1402 (1)
  • 1.148 (1)
  • 1.2661 (1)
  • 1.2965 (1)
  • 1.5224 (1)
  • 1.6205 (1)
to
Tool Cutting Edge Angle
  • 90.0 (35)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.0 (51)
to
Corner Radius
  • 0.0 (51)
to
Corner Chamfer
  • 0.0 (51)
to
Corner Chamfer
  • 0.0 (51)
to
application
Grade Of Cutting Tool
  • WU12PV (31)
  • WU13PV (20)
frontEnd
Thread TPI
  • 11.0 (1)
  • 12.0 (1)
  • 13.0 (1)
  • 14.0 (1)
  • 16.0 (1)
  • 18.0 (3)
  • 20.0 (3)
  • 24.0 (2)
  • 28.0 (1)
  • 32.0 (1)
to
Thread TPI
  • 11.0 (1)
  • 12.0 (1)
  • 13.0 (1)
  • 14.0 (1)
  • 16.0 (1)
  • 18.0 (3)
  • 20.0 (3)
  • 24.0 (2)
  • 28.0 (1)
  • 32.0 (1)
to
Thread Pitch
  • 0.5 (3)
  • 0.7 (1)
  • 0.75 (3)
  • 0.8 (2)
  • 1.0 (8)
  • 1.25 (4)
  • 1.5 (9)
  • 1.75 (1)
  • 2.0 (4)
  • 2.5 (1)
to
Thread Pitch
  • 0.5 (3)
  • 0.7 (1)
  • 0.75 (3)
  • 0.8 (2)
  • 1.0 (8)
  • 1.25 (4)
  • 1.5 (9)
  • 1.75 (1)
  • 2.0 (4)
  • 2.5 (1)
to
backEnd
Back-End Diameter
  • 0.1575 (1)
  • 0.2362 (11)
  • 0.315 (6)
  • 0.3937 (7)
  • 0.4724 (10)
  • 0.5512 (8)
  • 0.6299 (4)
  • 0.7087 (4)
to
Back-End Diameter
  • 4.0 (1)
  • 6.0 (11)
  • 8.0 (6)
  • 10.0 (7)
  • 12.0 (10)
  • 14.0 (8)
  • 16.0 (4)
  • 18.0 (4)
to
other
Grade
  • WU12PV (31)
  • WU13PV (20)
Platform
  • GTM11 (4)
  • GTM21 (6)
Tool Unit
  • I (15)
  • M (36)
Over All Length [L]
  • 42.0 (1)
  • 55.0 (8)
  • 62.0 (4)
  • 63.0 (3)
  • 70.0 (2)
  • 74.0 (4)
  • 80.0 (10)
  • 90.0 (11)
  • 100.0 (4)
  • 102.0 (4)
to
Over All Length [L]
  • 0.1657 (1)
  • 2.1654 (8)
  • 2.4409 (4)
  • 2.4803 (3)
  • 2.7559 (2)
  • 2.9134 (4)
  • 3.1496 (10)
  • 3.5433 (11)
  • 3.937 (4)
  • 4.0157 (4)
to
No filters matching ""
View Products in
Metric
Inch
Hochleistungs-Gewindefräser

Victory™ Vollhartmetall-Gewindefräser • Sackloch- und Durchgangsbohrungen
(20 Products)
  • Gewindedrehen: DurchgangsbohrungGewindedrehen: Durchgangsbohrung
  • Gewindedrehen: SacklochbohrungGewindedrehen: Sacklochbohrung
  • HMHM
  • Bohrtiefe: 2xBohrtiefe: 2x
  • Innere Kühlmittelzuführung: Axial: GewindebohrenInnere Kühlmittelzuführung: Axial: Gewindebohren
  • Herstellerspezifikationen: MHerstellerspezifikationen: M
  • Herstellerspezifikationen: MFHerstellerspezifikationen: MF
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [TDZ] Thread Diameter Size [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Number of Effective Cutting Edges on Face
4138391 GTM115001 GTM115001 WU13PV M3X0.5 2.4000 .0945 6.2400 .2457 42.0000 .1657 28.0 1.102 4.0 .1575 3
    4138392 GTM115002 GTM115002 WU13PV M4X0.7 3.1500 .1240 8.7300 .3437 55.0000 2.165 36.0 1.417 6.0 .2362 3
      4138493 GTM115003 GTM115003 WU13PV M5X0.8 4.0000 .1575 10.7800 .4244 55.0000 2.165 36.0 1.417 6.0 .2362 3
        4138494 GTM115004 GTM115004 WU13PV M6X1 4.8000 .1890 12.4800 .4913 55.0000 2.165 36.0 1.417 6.0 .2362 3
          4138495 GTM115005 GTM115005 WU13PV M8X1.25 5.9000 .2323 16.8300 .6626 63.0000 2.480 36.0 1.417 6.0 .2362 3
            4138496 GTM115006 GTM115006 WU13PV M10X1.5 7.9000 .3110 20.2400 .7969 70.0000 2.755 36.0 1.417 8.0 .315 3
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              Hochleistungs-Gewindefräser

              Victory™ Vollhartmetall-Gewindefräser • Sackloch- und Durchgangsbohrungen
              (16 Products)
              • Senken/FasenSenken/Fasen
              • Gewindedrehen: DurchgangsbohrungGewindedrehen: Durchgangsbohrung
              • Gewindedrehen: SacklochbohrungGewindedrehen: Sacklochbohrung
              • HMHM
              • Bohrtiefe: 2xBohrtiefe: 2x
              • Innere Kühlmittelzuführung: Axial: GewindebohrenInnere Kühlmittelzuführung: Axial: Gewindebohren
              • Herstellerspezifikationen: MHerstellerspezifikationen: M
              • Herstellerspezifikationen: MFHerstellerspezifikationen: MF
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [TDZ] Thread Diameter Size [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [DCH] Chamfer Diameter [DCH] Chamfer Diameter [LTHD] Thread Length [LTHD] Thread Length [LDCH] Chamfer Length-Tool Front [LDCH] Chamfer Length-Tool Front [L] Overall Length [L] Overall Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Number of Effective Cutting Edges on Face
              4138514 GTM215001 GTM215001 WU12PV M5X0.8 4.0000 .1575 5.3000 .2087 10.8200 .4260 11.4000 .4488 55.0000 2.165 36.0 1.417 6.0 .2362 3
                4138515 GTM215002 GTM215002 WU12PV M6X1 4.8000 .1890 6.3000 .2480 12.5200 .4929 13.1900 .5193 62.0000 2.440 36.0 1.417 8.0 .315 3
                  4138516 GTM215003 GTM215003 WU12PV M8X1.25 6.5000 .2559 8.3000 .3268 16.9100 .6657 17.7100 .6972 74.0000 2.913 40.0 1.574 10.0 .3937 3
                    4138517 GTM215004 GTM215004 WU12PV M10X1.5 8.2000 .3228 10.3000 .4055 20.2900 .7988 21.2200 .8354 80.0000 3.149 45.0 1.771 12.0 .4724 3
                      4138518 GTM215005 GTM215005 WU12PV M12X1.75 9.9000 .3898 12.3000 .4843 25.4200 1.000 26.4800 1.042 90.0000 3.543 45.0 1.771 14.0 .5512 4
                        4138519 GTM215006 GTM215006 WU12PV M14X2 11.6000 .4567 14.3000 .5630 29.0500 1.143 30.2400 1.190 100.0000 3.937 48.0 1.889 16.0 .6299 4
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty
                          Hochleistungs-Gewindefräser

                          Victory™ Vollhartmetall-Gewindefräser • Sackloch- und Durchgangsbohrungen
                          (15 Products)
                          • Senken/FasenSenken/Fasen
                          • Gewindedrehen: DurchgangsbohrungGewindedrehen: Durchgangsbohrung
                          • Gewindedrehen: SacklochbohrungGewindedrehen: Sacklochbohrung
                          • HMHM
                          • Bohrtiefe: 2xBohrtiefe: 2x
                          • Innere Kühlmittelzuführung: Axial: GewindebohrenInnere Kühlmittelzuführung: Axial: Gewindebohren
                          • Herstellerspezifikationen: UNCHerstellerspezifikationen: UNC
                          • Herstellerspezifikationen: UNFHerstellerspezifikationen: UNF
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [TDZ] Thread Diameter Size [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [DCH] Chamfer Diameter [DCH] Chamfer Diameter [LTHD] Thread Length [LTHD] Thread Length [LDCH] Chamfer Length-Tool Front [LDCH] Chamfer Length-Tool Front [L] Overall Length [L] Overall Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Number of Effective Cutting Edges on Face
                          4138530 GTM215017 GTM215017 WU12PV 1/4-20 4.7000 .1850 6.6500 .2618 13.3600 .5260 14.2300 .5602 62.0000 2.440 36.0 1.417 8.0 .315 3
                            4138531 GTM215018 GTM215018 WU12PV 5/16-18 6.1500 .2421 8.2500 .3248 16.2600 .6402 17.1900 .6768 74.0000 2.913 40.0 1.574 10.0 .3937 3
                              4138532 GTM215019 GTM215019 WU12PV 3/8-16 7.6500 .3012 9.8300 .3870 19.8900 .7831 20.8500 .8209 80.0000 3.149 45.0 1.771 12.0 .4724 3
                                4138533 GTM215020 GTM215020 WU12PV 7/16-14 9.0000 .3543 11.4300 .4500 22.7200 .8945 23.7900 .9366 80.0000 3.149 45.0 1.771 12.0 .4724 3
                                  4138534 GTM215021 GTM215021 WU12PV 1/2-13 10.3500 .4075 13.0000 .5118 26.4300 1.040 27.6000 1.086 90.0000 3.543 45.0 1.771 14.0 .5512 4
                                    4138535 GTM215022 GTM215022 WU12PV 9/16-12 11.8000 .4646 14.6100 .5752 30.7500 1.210 31.9900 1.259 100.0000 3.937 48.0 1.889 16.0 .6299 4
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty
                                      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                      You are about to create a duplicate . Do you want to proceed?
                                      You are about to delete Do you want to proceed?
                                      What would you like to rename your to?
                                      Please enter a valid name
                                      Please enter a name for the duplicate
                                      Please enter a valid name
                                      You are about to add to your My Solutions page. Do you want to proceed?
                                      Please enter a valid name
                                      Send a copy of

                                      Please enter a valid Email
                                      Please enter a valid name

                                      We have found the following CAD Drawings

                                      Select the files you are looking for and download them all at once

                                      You should be logged to see your dashboard information
                                      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                      item(s) successfully added to the cart
                                      View Cart