PSC
Filter
Filter
Filter anzeigen in
MetricInch
Werkstoff des Werkstücks
Werkstoff des Werkstücks
- P Stahl (262)
- P0Kohlenstoffarme Stähle, langspanend C < .25%; <125 HB; <530 N/mm^2 UTS(262)
- P1Kohlenstoffarme Stähle, kurzspanend C < .25%; <125 HB; <530 N/mm^2 UTS(262)
- P2Stähle mit mittlerem und hohem Kohlenstoffgehalt C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(262)
- P3Legierter Stahl/Werkzeugstahl C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(262)
- P4Legierter Stahl/Werkzeugstahl C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(262)
- P5Ferritische, martensitische und Rostfreie PH-Stähle <330 HB; <35 HRC; 600-900 N/mm^2 UTS(262)
- P6Hochfeste ferritische, martensitische und PH-Edelstähle 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(262)
- M Rostfreier Stahl (262)
- M1Austenitischer, Rostfreier Stahl 130-200 HB; <600 N/mm^2 UTS(262)
- M2Hochfeste austenitische, rostfreie Stähle und Edelstahlguss 150-230 HB; <25 HRC; >600 N/mm^2 UTS(262)
- M3Duplex-Edelstahl 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(262)
- K Gusseisen (262)
- K1Grauguss 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(262)
- K2GGV- und Sphäroguss mit niedriger bis mittlerer Festigkeit 130-260 HB; <28 HRC; <600 N/mm^2 UTS(262)
- K3Hochfestes und zwischenstufenvergütetes duktiles Gusseisen 180-350 HB; <43 HRC; >600 N/mm^2 UTS(262)
- N Buntmetalle (258)
- N1Geschmiedetes Aluminium (258)
- N2Aluminiumlegierungen mit geringem Siliziumgehalt und Magnesiumlegierungen Si <12,2 %(258)
- N3Aluminiumlegierungen mit hohem Siliziumgehalt Si >12,2%(160)
- N4Kupfer-, Messing- und Zink-Basis mit einem Zerspanbarkeitsindex von 70 bis 100 (258)
- N5Nylon, Kunststoffe, Gummi, Phenole und Glasfaser (258)
- N6Kohlefaser- und Graphit-Verbundwerkstoffe, CFRP (258)
- N7MMCs (238)
- S Hochwarmfeste Legierungen (262)
- S1Warmfeste Legierungen auf Eisenbasis 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(262)
- S2Warmfeste Legierungen auf Kobaltbasis 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(262)
- S3Warmfeste Legierungen auf Nickelbasis 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(262)
- S4Titan und Titanlegierungen 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(262)
- H Gehärtete Werkstoffe (198)
- H1Gehärtete Werkstoffe 44-48 HRC(198)
- H2Gehärtete Werkstoffe 48-55 HRC(198)
- H3Gehärtete Werkstoffe 56-60 HRC(198)
- H4Gehärtete Werkstoffe >60 HRC(183)
- C Verbundwerkstoffe (CFRP) (198)
- C1CFRP, CFRP / CFRP (198)
- C2CFRP / Aluminium CFRP / Nichteisen (178)
Anwendungen
Anwendungen
Back Boring (1)
Facing (194)
Grooving (17)
ID Facing (172)
ID Grooving (21)
ID Thread Turning (25)
Multiple Direction Cutting (212)
OD Thread Turning (7)
Plunge Turning (57)
Profiling (24)
TRN Boring (172)
Turning (201)
Gewindeart
Gewindeart
- 55 (23)
- 60 (62)
- ACME (46)
- API (36)
- API BUTTRESS (5)
- API RD (34)
- BSPT (10)
- BSW (45)
- BUTTRESS (36)
- M (36)
- NPT (34)
- NPTF (10)
- RD DIN 405 (21)
- STUB ACME (43)
- TR DIN 103 (19)
- UN (55)
- UNJ (34)
Schnittbedingung
Schnittbedingung
- Heavily Interrupted Cut (235)
- Lightly Interrupted Cut (236)
- Smooth Cut (236)
ISO-Einstellwinkel [KRI]
ISO-Einstellwinkel [KRI]
- 45.0 (10)
- 62.5 (3)
- 72.5 (3)
- 75.0 (18)
- 90.0 (71)
- 93.0 (65)
- 95.0 (73)
- 107.5 (21)
bis
Anschlussart
Anschlussart
- PSC (169)
Schneidkanten pro Wendeschneidplatte
Schneidkanten pro Wendeschneidplatte
- 0.0 (62)
- 1.0 (165)
- 2.0 (203)
- 3.0 (33)
- 4.0 (152)
- 6.0 (9)
- 8.0 (75)
bis
Gesamtlänge [L]
Gesamtlänge [L]
- 1.9685 in(1)
- 2.0472 in(12)
- 2.126 in(1)
- 2.2047 in(1)
- 2.3622 in(53)
- 2.4409 in(3)
- 2.559 in(11)
- 2.5591 in(75)
- 2.7559 in(8)
- 2.9528 in(2)
- 3.1496 in(5)
- 3.5433 in(22)
- 3.937 in(10)
- 4.1339 in(5)
- 4.3307 in(14)
- 4.7244 in(2)
- 4.9213 in(2)
- 5.5118 in(26)
- 5.7087 in(1)
- 5.9055 in(5)
- 6.8898 in(5)
bis
Gesamtlänge [L]
Gesamtlänge [L]
- 50.0 mm(1)
- 52.0 mm(12)
- 54.0 mm(1)
- 56.0 mm(1)
- 60.0 mm(53)
- 62.0 mm(3)
- 65.0 mm(86)
- 70.0 mm(8)
- 75.0 mm(2)
- 80.0 mm(5)
- 90.0 mm(22)
- 100.0 mm(10)
- 105.0 mm(5)
- 110.0 mm(14)
- 120.0 mm(2)
- 125.0 mm(2)
- 140.0 mm(26)
- 145.0 mm(1)
- 150.0 mm(5)
- 175.0 mm(5)
bis
Eckenradius
Eckenradius
- 0.0 in(16)
- 0.001 in(24)
- 0.002 in(64)
- 0.003 in(53)
- 0.004 in(154)
- 0.005 in(23)
- 0.006 in(47)
- 0.007 in(35)
- 0.008 in(160)
- 0.009 in(22)
- 0.01 in(37)
- 0.011 in(14)
- 0.012 in(27)
- 0.013 in(32)
- 0.014 in(64)
- 0.016 in(191)
- 0.017 in(4)
- 0.018 in(30)
- 0.019 in(10)
- 0.02 in(27)
- 0.021 in(4)
- 0.023 in(32)
- 0.024 in(7)
- 0.028 in(8)
- 0.03 in(6)
- 0.031 in(217)
- 0.035 in(32)
- 0.036 in(2)
- -0.039 in(62)
- 0.039 in(29)
- 0.047 in(211)
- 0.049 in(26)
- 0.055 in(2)
- 0.059 in(26)
- 0.062 in(22)
- 0.063 in(175)
- 0.069 in(26)
- 0.078 in(22)
- 0.079 in(28)
- 0.089 in(22)
- 0.094 in(68)
- 0.098 in(10)
- 0.125 in(10)
- 0.157 in(8)
- 0.197 in(1)
- 0.236 in(2)
- 0.25 in(2)
- 0.313 in(2)
- 0.315 in(2)
- 0.394 in(2)
bis
Eckenradius
Eckenradius
- 0.0 mm(16)
- 0.025 mm(24)
- 0.05 mm(64)
- 0.075 mm(53)
- 0.1 mm(154)
- 0.125 mm(23)
- 0.15 mm(47)
- 0.175 mm(35)
- 0.2 mm(160)
- 0.225 mm(22)
- 0.25 mm(37)
- 0.275 mm(14)
- 0.3 mm(27)
- 0.325 mm(32)
- 0.35 mm(64)
- 0.4 mm(191)
- 0.425 mm(4)
- 0.45 mm(30)
- 0.475 mm(10)
- 0.5 mm(27)
- 0.525 mm(4)
- 0.575 mm(32)
- 0.6 mm(7)
- 0.7 mm(8)
- 0.75 mm(6)
- 0.775 mm(26)
- 0.8 mm(191)
- 0.9 mm(32)
- 0.925 mm(2)
- -1.0 mm(62)
- 1.0 mm(29)
- 1.2 mm(211)
- 1.25 mm(26)
- 1.4 mm(2)
- 1.5 mm(26)
- 1.575 mm(22)
- 1.6 mm(175)
- 1.75 mm(26)
- 1.975 mm(22)
- 2.0 mm(28)
- 2.25 mm(22)
- 2.375 mm(17)
- 2.4 mm(68)
- 2.5 mm(10)
- 3.175 mm(10)
- 4.0 mm(8)
- 5.0 mm(1)
- 6.0 mm(2)
- 6.35 mm(2)
- 7.95 mm(2)
- 8.0 mm(2)
- 10.0 mm(2)
bis
application
Minimale Schnitttiefe
Minimale Schnitttiefe
Minimaler Vorschub
Minimaler Vorschub
Schneidstoffsorte
Schneidstoffsorte
- CW2015 (101)
- CW5025 (88)
- HCK10 (5)
- HWK15 (1)
- K00326 (7)
- K060 (32)
- K090 (15)
- K1 (8)
- K313 (214)
- K420 (36)
- K68 (187)
- K8735 (7)
- KB1340 (46)
- KB1345 (59)
- KB1610 (68)
- KB1630 (92)
- KB5610 (61)
- KB5630 (81)
- KBH10 (126)
- KBH10B (80)
- KBH20 (140)
- KBH20B (80)
- KBK35 (26)
- KC5010 (248)
- KC5020P (2)
- KC5025 (249)
- KC5410 (186)
- KC720 (38)
- KC730 (177)
- KC850 (220)
- KC9110 (4)
- KC9125 (12)
- KCK05 (167)
- KCK05B (67)
- KCK15 (174)
- KCK15B (185)
- KCK20 (214)
- KCK20B (210)
- KCM15 (162)
- KCM15B (180)
- KCM25 (192)
- KCM25B (183)
- KCM25S (14)
- KCM35 (167)
- KCM35B (102)
- KCP05 (136)
- KCP05B (130)
- KCP10 (192)
- KCP10B (227)
- KCP15 (19)
- KCP20S (14)
- KCP25 (197)
- KCP25B (235)
- KCP25C (200)
- KCP30 (183)
- KCP30B (100)
- KCP40 (124)
- KCP40B (151)
- KCPK05 (146)
- KCS10 (78)
- KCS10B (191)
- KCS25S (14)
- KCU10 (234)
- KCU10B (234)
- KCU25 (230)
- KCU25B (228)
- KD1400 (83)
- KD1405 (67)
- KD1425 (119)
- KN10S (16)
- KS15 (39)
- KT315 (178)
- KT325 (67)
- KTP10 (138)
- KTP25S (122)
- KY1540 (32)
- KY1615 (16)
- KY3500 (130)
- KY4300 (70)
- KY4400 (115)
- KYHK15B (121)
- KYK10 (46)
- KYK25 (84)
- KYS25 (36)
- KYS30 (53)
- PB100 (32)
- PB250 (4)
- PN120 (2)
- SP4019 (38)
- THM (121)
- THM-X (85)
- THMF-X (36)
- TN10P (155)
- TN10U (126)
- TN15M (113)
- TN15U (79)
- TN2000 (132)
- TN20K (161)
- TN20P (175)
- TN30M (127)
- TN30P (106)
- TN4000 (123)
- TN6010 (113)
- TN6025 (73)
- TTR (1)
- TTR-X (8)
- TTS (57)
- WBH10P (81)
- WBH10U (40)
- WBH20P (109)
- WBH30P (80)
- WBK40U (4)
- WBK45U (14)
- WDN00U (50)
- WDN25U (90)
- WK05CT (152)
- WK15CT (116)
- WK20CT (185)
- WM15CT (171)
- WM25CT (181)
- WM35CT (132)
- WP05CT (39)
- WP15CT (188)
- WP20TT (5)
- WP25CT (186)
- WP35CT (164)
- WS10PT (156)
- WS25PT (155)
- WU05PT (18)
- WU10HT (183)
- WU10PT (142)
- WU25PT (142)
- X00580 (32)
- X00581 (32)
- X00582 (32)
- X00583 (32)
- X00584 (32)
- X00585 (32)
- X00586 (32)
- X00591 (32)
- X00592 (32)
- X00593 (32)
- X00594 (32)
- X00596 (32)
- X00597 (32)
- X00599 (32)
Schneidrichtung
Schneidrichtung
- L (75)
- N (10)
- R (84)
Schlicht-Wendeschneidplatte
Schlicht-Wendeschneidplatte
- N (262)
- Y (105)
F Abmessung
F Abmessung
- 0.0 mm(8)
- 5.0 mm(1)
- 6.0 mm(1)
- 11.0 mm(4)
- 12.0 mm(2)
- 13.0 mm(7)
- 14.0 mm(3)
- 17.0 mm(25)
- 18.0 mm(2)
- 22.0 mm(23)
- 27.0 mm(34)
- 32.0 mm(1)
- 35.0 mm(35)
- 43.0 mm(2)
- 45.0 mm(21)
bis
F Abmessung
F Abmessung
- 0.0 in(8)
- 0.1969 in(1)
- 0.2362 in(1)
- 0.4331 in(4)
- 0.4724 in(2)
- 0.5118 in(7)
- 0.5512 in(3)
- 0.6693 in(25)
- 0.7087 in(2)
- 0.8661 in(23)
- 1.063 in(34)
- 1.2598 in(1)
- 1.378 in(35)
- 1.6929 in(2)
- 1.7717 in(21)
bis
Minimaler Durchmesser der Axialnutenbearbeitung
Minimaler Durchmesser der Axialnutenbearbeitung
- 0.0 mm(7)
- -1.0 mm(8)
- 20.0 mm(6)
- 24.0 mm(2)
- 24.5 mm(1)
- 25.0 mm(7)
- 32.0 mm(21)
- 33.0 mm(3)
- 33.5 mm(1)
- 34.0 mm(2)
- 38.5 mm(4)
- 40.0 mm(19)
- 41.3 mm(4)
- 47.6 mm(4)
- 48.0 mm(3)
- 48.5 mm(3)
- 50.0 mm(23)
- 52.5 mm(1)
- 53.0 mm(1)
- 57.2 mm(3)
- 62.0 mm(3)
- 63.0 mm(12)
- 64.0 mm(2)
- 65.0 mm(6)
- 65.5 mm(1)
- 66.0 mm(1)
- 80.0 mm(2)
- 81.0 mm(3)
- 88.9 mm(4)
- 90.0 mm(7)
- 110.0 mm(58)
- 125.0 mm(21)
- 139.7 mm(4)
- 165.0 mm(1)
- 174.6 mm(4)
- 209.6 mm(3)
- 215.0 mm(2)
- 222.3 mm(3)
- 223.0 mm(2)
- 510.0 mm(2)
bis
Minimaler Durchmesser der Axialnutenbearbeitung
Minimaler Durchmesser der Axialnutenbearbeitung
- 0.0 in(14)
- 0.7874 in(6)
- 0.9449 in(2)
- 0.9646 in(1)
- 0.9843 in(7)
- -1.0 in(8)
- 1.2598 in(21)
- 1.2992 in(3)
- 1.3189 in(1)
- 1.3386 in(2)
- 1.5157 in(4)
- 1.5748 in(19)
- 1.626 in(4)
- 1.874 in(4)
- 1.8898 in(3)
- 1.9094 in(3)
- 1.9685 in(21)
- 1.969 in(2)
- 2.0669 in(1)
- 2.0866 in(1)
- 2.252 in(3)
- 2.4409 in(3)
- 2.48 in(2)
- 2.4803 in(10)
- 2.5197 in(2)
- 2.5591 in(6)
- 2.5787 in(1)
- 2.5984 in(1)
- 3.1496 in(2)
- 3.189 in(3)
- 3.5 in(4)
- 3.5433 in(7)
- 4.3307 in(50)
- 4.331 in(8)
- 4.921 in(1)
- 4.9213 in(20)
- 5.5 in(4)
- 6.4961 in(1)
- 6.874 in(4)
- 8.252 in(3)
- 8.2677 in(2)
- 8.465 in(2)
- 8.752 in(3)
- 8.7795 in(2)
bis
Maximaler Durchmesser der Axialnutenbearbeitung
Maximaler Durchmesser der Axialnutenbearbeitung
- -1.0 in(62)
- 393.661 in(36)
bis
Maximaler Durchmesser der Axialnutenbearbeitung
Maximaler Durchmesser der Axialnutenbearbeitung
- -1.0 mm(62)
- 9999.0 mm(36)
bis
Schneidrichtung
Schneidrichtung
- B (47)
- E (51)
- P (1)
- S (70)
Spanwinkelausführung
Spanwinkelausführung
- DOUBLE NEGATIVE (87)
- NEGATIVE-ZERO (29)
- NEUTRAL (ZERO) (30)
Bohrungstiefe min.
Bohrungstiefe min.
- 1.4173 in(3)
- 1.6535 in(2)
- 1.811 in(3)
- 1.8504 in(2)
- 1.8898 in(2)
- 1.9685 in(1)
- 2.0079 in(1)
- 2.0472 in(10)
- 2.126 in(1)
- 2.2047 in(5)
- 2.3622 in(34)
- 2.4409 in(4)
- 2.5118 in(2)
- 2.5197 in(5)
- 2.524 in(1)
- 2.559 in(11)
- 2.5591 in(39)
- 2.5984 in(5)
- 2.6378 in(10)
- 2.8346 in(2)
- 2.9134 in(3)
- 3.1496 in(6)
- 3.279 in(2)
- 3.3071 in(4)
- 3.4646 in(6)
- 3.4803 in(1)
- 3.7008 in(2)
- 3.91 in(2)
- 3.937 in(2)
- 4.1575 in(2)
- 4.3386 in(1)
- 4.3701 in(1)
- 4.3709 in(1)
- 4.4488 in(3)
- 4.4882 in(4)
- 4.493 in(2)
- 4.5276 in(4)
- 4.531 in(2)
- 4.6457 in(2)
- 4.685 in(4)
- 4.7244 in(1)
- 5.9055 in(5)
- 5.9843 in(5)
bis
Bohrungstiefe min.
Bohrungstiefe min.
- 36.0 mm(3)
- 42.0 mm(2)
- 46.0 mm(3)
- 47.0 mm(2)
- 48.0 mm(2)
- 50.0 mm(1)
- 51.0 mm(1)
- 52.0 mm(10)
- 54.0 mm(1)
- 56.0 mm(5)
- 60.0 mm(34)
- 62.0 mm(4)
- 63.8 mm(2)
- 64.0 mm(5)
- 64.12 mm(1)
- 65.0 mm(50)
- 66.0 mm(5)
- 67.0 mm(10)
- 72.0 mm(2)
- 74.0 mm(3)
- 80.0 mm(6)
- 83.29 mm(2)
- 84.0 mm(4)
- 88.0 mm(6)
- 88.4 mm(1)
- 94.0 mm(2)
- 99.32 mm(2)
- 100.0 mm(2)
- 105.6 mm(2)
- 110.2 mm(1)
- 111.0 mm(1)
- 111.02 mm(1)
- 113.0 mm(3)
- 114.0 mm(4)
- 114.12 mm(2)
- 115.0 mm(4)
- 115.1 mm(2)
- 118.0 mm(2)
- 119.0 mm(4)
- 120.0 mm(1)
- 150.0 mm(5)
- 152.0 mm(5)
bis
Bohrstangenmaterial
Bohrstangenmaterial
- S (123)
frontEnd
Stirnseitige Aufnahme
Stirnseitige Aufnahme
- BORING BAR ADAPTER (4)
- CARTRIDGE MOUNT (6)
- END MILL ADAPTER (16)
- ER COLLET CHUCK (14)
- EXTENSION (5)
- HYDRAULIC CHUCK (18)
- HYDRAULIC CHUCK-HIGH TORQUE (4)
- KM MODULAR ADAPTER (12)
- MODULAR ADAPTER (6)
- RC TAP CHUCK ADAPTER-T & C (4)
- REDUCER (2)
- SHELL MILL ADAPTER (12)
- SHRINK FIT ADAPTER (16)
- SQUARE SHANK ADAPTER (19)
- WHISTLE NOTCH ADAPTER (11)
Spannsystem
Spannsystem
- D (95)
- N (44)
- P (65)
- S (60)
Schnittbreite
Schnittbreite
- 0.0197 in(4)
- 0.031 in(4)
- 0.0315 in(4)
- 0.035 in(3)
- 0.039 in(4)
- 0.0394 in(26)
- 0.041 in(4)
- 0.047 in(26)
- 0.0472 in(26)
- 0.055 in(4)
- 0.0551 in(4)
- 0.058 in(4)
- 0.0591 in(26)
- 0.062 in(26)
- 0.0669 in(4)
- 0.067 in(4)
- 0.0689 in(26)
- 0.072 in(22)
- 0.076 in(1)
- 0.0768 in(4)
- 0.077 in(1)
- 0.078 in(22)
- 0.0787 in(26)
- 0.079 in(14)
- 0.0866 in(26)
- 0.088 in(26)
- 0.0886 in(16)
- 0.094 in(26)
- 0.097 in(22)
- 0.0984 in(26)
- 0.105 in(22)
- 0.108 in(4)
- 0.1083 in(26)
- 0.11 in(22)
- 0.118 in(25)
- 0.1181 in(36)
- 0.122 in(22)
- 0.125 in(36)
- 0.126 in(25)
- 0.1278 in(4)
- 0.128 in(22)
- 0.129 in(1)
- 0.131 in(10)
- 0.1378 in(36)
- 0.142 in(22)
- 0.147 in(3)
- 0.151 in(4)
- 0.156 in(22)
- 0.157 in(22)
- 0.1574 in(28)
- 0.1575 in(32)
- 0.167 in(10)
- 0.1673 in(22)
- 0.1771 in(32)
- 0.1772 in(32)
- 0.178 in(22)
- 0.185 in(22)
- 0.188 in(32)
- 0.189 in(32)
- 0.192 in(10)
- 0.193 in(10)
- 0.195 in(22)
- 0.196 in(22)
- 0.1969 in(10)
- 0.197 in(4)
- 0.213 in(10)
- 0.2165 in(6)
- 0.2166 in(4)
- 0.2362 in(10)
- 0.25 in(10)
- 0.256 in(10)
- -1.0 in(8)
bis
Schnittbreite
Schnittbreite
- 0.5 mm(4)
- 0.787 mm(4)
- 0.8 mm(4)
- 0.889 mm(3)
- 0.991 mm(4)
- 1.0 mm(26)
- -1.0 mm(8)
- 1.041 mm(4)
- 1.19 mm(16)
- 1.194 mm(26)
- 1.2 mm(26)
- 1.39 mm(4)
- 1.397 mm(3)
- 1.4 mm(4)
- 1.473 mm(4)
- 1.5 mm(26)
- 1.57 mm(23)
- 1.575 mm(26)
- 1.69 mm(3)
- 1.7 mm(4)
- 1.702 mm(4)
- 1.75 mm(26)
- 1.829 mm(22)
- 1.94 mm(1)
- 1.95 mm(4)
- 1.956 mm(1)
- 1.981 mm(22)
- 2.0 mm(26)
- 2.007 mm(4)
- 2.2 mm(26)
- 2.235 mm(25)
- 2.236 mm(10)
- 2.24 mm(4)
- 2.25 mm(16)
- 2.387 mm(10)
- 2.388 mm(26)
- 2.39 mm(12)
- 2.464 mm(22)
- 2.5 mm(26)
- 2.667 mm(22)
- 2.74 mm(1)
- 2.743 mm(3)
- 2.75 mm(26)
- 2.794 mm(22)
- 2.997 mm(25)
- 3.0 mm(36)
- 3.099 mm(22)
- 3.17 mm(22)
- 3.175 mm(36)
- 3.18 mm(5)
- 3.2 mm(25)
- 3.245 mm(4)
- 3.25 mm(22)
- 3.251 mm(10)
- 3.27 mm(1)
- 3.32 mm(10)
- 3.329 mm(10)
- 3.5 mm(36)
- 3.607 mm(22)
- 3.73 mm(3)
- 3.835 mm(3)
- 3.84 mm(4)
- 3.96 mm(22)
- 3.962 mm(22)
- 3.974 mm(10)
- 3.988 mm(22)
- 4.0 mm(32)
- 4.242 mm(10)
- 4.25 mm(22)
- 4.5 mm(32)
- 4.521 mm(22)
- 4.699 mm(22)
- 4.775 mm(32)
- 4.78 mm(6)
- 4.785 mm(6)
- 4.788 mm(4)
- 4.8 mm(22)
- 4.801 mm(32)
- 4.88 mm(10)
- 4.9 mm(10)
- 4.95 mm(22)
- 4.953 mm(10)
- 4.978 mm(22)
- 5.0 mm(10)
- 5.004 mm(4)
- 5.41 mm(10)
- 5.5 mm(10)
- 6.0 mm(10)
- 6.35 mm(10)
- 6.36 mm(4)
- 6.502 mm(10)
bis
Stirnseitentyp
Stirnseitentyp
- CCS - PSC (13)
- DLK - DUO-LOCK Modular Connect (9)
- FDA - Milling Cutter Arbor (12)
- KMT - KM Adapter (12)
- MCS - Modular Cartridge System (6)
- SWB - Tap Chuck Adapter (4)
- SZK - Collet Taper (14)
- VKT - Square Shank (19)
- ZYL - Cylindrical Adapter (69)
Wendeschneidplatten-Form
Wendeschneidplatten-Form
- C-DIAMOND/RHOMBIC 80 (76)
- D-DIAMOND/RHOMBIC 55 (56)
- LT-TRIANGLE LAY DOWN THREAD 60 (26)
- N/K-PARALLELOGRAM 55 (1)
- R-ROUND (11)
- S-SQUARE 90 (15)
- TN-TOP NOTCH (36)
- V-DIAMOND/RHOMBIC 35 (34)
- W-TRIGON 80 (9)
Stirnseitenausführung
Stirnseitenausführung
- CCS01 Std Design (13)
- DLK01 DUO-LOCK (9)
- FDA22 Transv Drive & SHCS (12)
- KMT00 All KM, except 02,05,09 (12)
- MCS01 Modular Deep Grooving (6)
- SWB-01 WFL#...WES#(Bilz) (4)
- SZK02 Collets 8 Degree Taper (14)
- VKT01 Std Design (19)
- ZYL01 Straight Shank (38)
- ZYL13 2Deg-Whistle Notch (11)
- ZYL14 Weldon+Whistle Notch (16)
- ZYL22 Boring Bar Shank (4)
Wende-schneid-platten-Größe
Wende-schneid-platten-Größe
- 2 (4)
- 3 (22)
- 4 (10)
Maximale Stechtiefe
Maximale Stechtiefe
- 0.1382 in(4)
- 0.2098 in(14)
- 0.21 in(6)
- 0.291 in(1)
- 0.294 in(1)
- 0.2941 in(8)
- 0.4728 in(1)
- 0.9843 in(1)
- 1.1024 in(1)
bis
Maximale Stechtiefe
Maximale Stechtiefe
- 3.51 mm(4)
- 5.33 mm(20)
- 7.47 mm(10)
- 12.01 mm(1)
- 25.0 mm(1)
- 28.0 mm(1)
bis
Messlänge
Messlänge
- 23.0000 in(4)
- 25.0000 in(7)
- 26.0000 in(1)
- 28.0000 in(4)
- 30.0000 in(2)
- 34.0000 in(1)
- 35.0000 in(1)
- 38.0000 in(1)
- 40.0000 in(3)
- 45.0000 in(2)
- 45.6000 in(1)
- 49.0000 in(2)
- 50.0000 in(3)
- 50.8000 in(2)
- 55.0000 in(1)
- 55.5000 in(2)
- 57.1500 in(2)
- 60.0000 in(11)
- 60.4500 in(1)
- 63.5000 in(2)
- 65.0000 in(11)
- 68.0000 in(1)
- 69.0000 in(1)
- 70.0000 in(7)
- 75.0000 in(5)
- 77.0000 in(1)
- 80.0000 in(33)
- 85.0000 in(9)
- 88.0000 in(1)
- 88.9000 in(1)
- 90.0000 in(10)
- 95.0000 in(5)
- 95.2500 in(1)
- 100.0000 in(9)
- 105.0000 in(1)
- 120.0000 in(1)
- 122.0000 in(1)
- 140.0000 in(2)
- 155.0000 in(2)
- 192.0000 in(1)
Messlänge
Messlänge
- 23.0000 mm(4)
- 25.0000 mm(7)
- 26.0000 mm(1)
- 28.0000 mm(4)
- 30.0000 mm(2)
- 34.0000 mm(1)
- 35.0000 mm(1)
- 38.0000 mm(1)
- 40.0000 mm(3)
- 45.0000 mm(2)
- 45.6000 mm(1)
- 49.0000 mm(2)
- 50.0000 mm(3)
- 50.8000 mm(2)
- 55.0000 mm(1)
- 55.5000 mm(2)
- 57.1500 mm(2)
- 60.0000 mm(11)
- 60.4500 mm(1)
- 63.5000 mm(2)
- 65.0000 mm(11)
- 68.0000 mm(1)
- 69.0000 mm(1)
- 70.0000 mm(7)
- 75.0000 mm(5)
- 77.0000 mm(1)
- 80.0000 mm(33)
- 85.0000 mm(9)
- 88.0000 mm(1)
- 88.9000 mm(1)
- 90.0000 mm(10)
- 95.0000 mm(5)
- 95.2500 mm(1)
- 100.0000 mm(9)
- 105.0000 mm(1)
- 120.0000 mm(1)
- 122.0000 mm(1)
- 140.0000 mm(2)
- 155.0000 mm(2)
- 192.0000 mm(1)
Größe der Stirnseite
Größe der Stirnseite
- 3.0 in(1)
- 4.0 in(1)
- 5.0 in(1)
- 6.0 in(4)
- 6.35 in(1)
- 8.0 in(4)
- 9.52 in(1)
- 9.525 in(1)
- 10.0 in(4)
- 12.0 in(4)
- 12.7 in(2)
- 14.0 in(4)
- 15.875 in(1)
- 15.88 in(1)
- 16.0 in(7)
- 18.0 in(4)
- 19.0 in(2)
- 19.04 in(4)
- 19.05 in(4)
- 20.0 in(7)
- 22.0 in(2)
- 22.22 in(1)
- 25.0 in(5)
- 25.39 in(1)
- 25.4 in(3)
- 27.0 in(2)
- 31.0 in(1)
- 31.74 in(1)
- 31.75 in(2)
- 31.758 in(1)
- 32.0 in(4)
- 38.091 in(1)
- 38.1 in(1)
- 40.0 in(3)
- 48.0 in(1)
- 50.0 in(7)
- 63.0 in(7)
- 80.0 in(2)
bis
Größe der Stirnseite
Größe der Stirnseite
- 3.0 mm(1)
- 4.0 mm(1)
- 5.0 mm(1)
- 6.0 mm(4)
- 6.35 mm(1)
- 8.0 mm(4)
- 9.52 mm(1)
- 9.525 mm(1)
- 10.0 mm(4)
- 12.0 mm(4)
- 12.7 mm(2)
- 14.0 mm(4)
- 15.875 mm(1)
- 15.88 mm(1)
- 16.0 mm(7)
- 18.0 mm(4)
- 19.0 mm(2)
- 19.04 mm(4)
- 19.05 mm(4)
- 20.0 mm(7)
- 22.0 mm(2)
- 22.22 mm(1)
- 25.0 mm(5)
- 25.39 mm(1)
- 25.4 mm(3)
- 27.0 mm(2)
- 31.0 mm(1)
- 31.74 mm(1)
- 31.75 mm(2)
- 31.758 mm(1)
- 32.0 mm(4)
- 38.091 mm(1)
- 38.1 mm(1)
- 40.0 mm(3)
- 48.0 mm(1)
- 50.0 mm(7)
- 63.0 mm(7)
- 80.0 mm(2)
bis
insertGeometry
Schneidstoff
Schneidstoff
- B H (138)
- B L (140)
- C A (128)
- C N (130)
- D P (151)
- H T (178)
- H W (262)
backEnd
Aufnahmeart
Aufnahmeart
- TAPER SHANK (169)
Systemgröße
Systemgröße
- PSC50 (80)
- PSC63 (170)
- PSC80 (6)
- VDI40 (1)
- VDI50 (3)
Hinterer Durchmesser
Hinterer Durchmesser
- 40.0 mm(1)
- 49.974 mm(1)
- 50.0 mm(166)
- 62.977 mm(1)
- 63.0 mm(247)
- 80.0 mm(6)
bis
Hinterer Durchmesser
Hinterer Durchmesser
- 1.5748 in(1)
- 1.9674 in(1)
- 1.968 in(5)
- 1.9685 in(28)
- 1.969 in(14)
- 2.4794 in(1)
- 2.48 in(15)
- 2.4803 in(78)
- 2.5 in(9)
- 3.1496 in(6)
bis
No filters matching ""
