successfully added to cart
View Cart
Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Chamfer Turning Chamfer Turning (8)
  • Cut-Off Cut-Off (8)
  • Deep Grooving Deep Grooving (8)
  • Face Grooving Face Grooving (8)
  • Facing Facing (8)
  • Grooving Grooving (22)
  • ID Grooving ID Grooving (3)
  • ID Thread Turning ID Thread Turning (11)
  • Multiple Direction Cutting Multiple Direction Cutting (8)
  • OD Thread Turning OD Thread Turning (22)
  • Plunge Turning Plunge Turning (8)
  • Profiling Profiling (8)
  • Threading Threading (15)
  • Turning Turning (8)
Workpiece Material
  • P Steel (23)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (23)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (23)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (23)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (23)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (23)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (23)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (23)
  • M Stainless Steel (23)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (23)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (23)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (23)
  • K Cast Iron (23)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (23)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (23)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (23)
  • N Non-Ferrous Materials (23)
    • N1
      Wrought Aluminum
      (23)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (23)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (23)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (23)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (23)
    • N6
      Carbon, Graphite Composites, CFRP
      (23)
    • N7
      MMC's
      (23)
  • S High-Temp Alloys (23)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (23)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (23)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (23)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (23)
  • H Hardened Materials (23)
    • H1
      Hardened Materials 44-48 HRC
      (23)
    • H2
      Hardened Materials 48-55 HRC
      (23)
    • H3
      Hardened Materials 56-60 HRC
      (14)
    • H4
      Hardened Materials >60 HRC
      (14)
Type of Thread
  • 60 (23)
  • ACME (14)
  • API (14)
  • API RD (10)
  • BSW (10)
  • BUTTRESS (23)
  • M (15)
  • NPT (10)
  • STUB ACME (10)
  • UN (23)
  • UNJ (10)
Cutting Condition
  • Heavily Interrupted Cut (23)
  • Lightly Interrupted Cut (23)
  • Smooth Cut (23)
  • Varying Depth of Cut (23)
Cutting Condition Material
  • H-All (23)
  • K-All (23)
  • M-All (23)
  • N-All (23)
  • P-All (23)
  • S-All (23)
Tool Cutting Edge Angle
  • 90.0 (15)
  • 93.0 (8)
to
Cutting Edges Per Insert
  • 1.0 (23)
  • 2.0 (23)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.051 (5)
  • 0.057 (5)
  • 0.066 (10)
  • 0.076 (23)
  • 0.08 (19)
  • 0.089 (9)
  • 0.09 (9)
  • 0.094 (10)
  • 0.097 (5)
  • 0.1 (19)
  • 0.102 (19)
  • 0.116 (5)
  • 0.117 (5)
  • 0.127 (10)
  • 0.131 (10)
  • 0.132 (10)
  • 0.133 (10)
  • 0.15 (10)
  • 0.155 (10)
  • 0.157 (10)
  • 0.16 (4)
  • 0.165 (14)
  • 0.173 (10)
  • 0.178 (10)
  • 0.185 (5)
  • 0.19 (23)
  • 0.191 (23)
  • 0.198 (10)
  • 0.2 (10)
  • 0.202 (15)
  • 0.224 (10)
  • 0.235 (10)
  • 0.244 (5)
  • 0.25 (15)
  • 0.251 (10)
  • 0.254 (19)
  • 0.269 (10)
  • 0.282 (10)
  • 0.284 (10)
  • 0.3 (10)
  • 0.315 (12)
  • 0.318 (14)
  • 0.33 (10)
  • 0.34 (10)
  • 0.343 (4)
  • 0.356 (10)
  • 0.404 (10)
  • 0.406 (10)
  • 0.43 (10)
  • 0.445 (14)
  • 0.472 (5)
  • 0.49 (10)
  • 0.5 (9)
  • 0.508 (10)
  • 0.565 (2)
  • 0.57 (5)
  • 0.572 (14)
  • 0.575 (9)
  • 0.75 (9)
  • 0.787 (19)
  • 0.902 (14)
  • 1.0 (19)
  • 1.194 (19)
  • 1.195 (5)
  • 1.25 (19)
  • 1.5 (19)
  • 1.585 (10)
  • 1.588 (23)
  • 1.59 (2)
  • 1.75 (19)
  • 1.98 (5)
  • 1.981 (10)
  • 2.0 (14)
  • 2.25 (14)
  • 2.388 (14)
  • 2.39 (2)
  • 2.5 (4)
  • 3.175 (4)
  • 3.18 (2)
to
Corner Radius
  • 0.002 (5)
  • 0.0023 (5)
  • 0.0026 (10)
  • 0.003 (23)
  • 0.0031 (19)
  • 0.0035 (9)
  • 0.0037 (10)
  • 0.0038 (5)
  • 0.004 (19)
  • 0.0046 (10)
  • 0.005 (10)
  • 0.0052 (10)
  • 0.0053 (10)
  • 0.0059 (10)
  • 0.006 (10)
  • 0.0062 (10)
  • 0.0065 (14)
  • 0.0068 (10)
  • 0.007 (10)
  • 0.0075 (23)
  • 0.0078 (10)
  • 0.0079 (5)
  • 0.008 (15)
  • 0.0088 (10)
  • 0.0093 (10)
  • 0.0096 (5)
  • 0.0099 (10)
  • 0.01 (19)
  • 0.0106 (10)
  • 0.0111 (10)
  • 0.0112 (10)
  • 0.0118 (10)
  • 0.0124 (10)
  • 0.0125 (14)
  • 0.013 (10)
  • 0.0135 (14)
  • 0.014 (10)
  • 0.0159 (10)
  • 0.016 (10)
  • 0.017 (10)
  • 0.0175 (14)
  • 0.0186 (5)
  • 0.0193 (10)
  • 0.0197 (9)
  • 0.02 (10)
  • 0.0225 (14)
  • 0.0295 (9)
  • 0.031 (19)
  • 0.0355 (14)
  • 0.0394 (19)
  • 0.047 (19)
  • 0.0492 (19)
  • 0.0591 (19)
  • 0.0625 (23)
  • 0.0689 (19)
  • 0.078 (10)
  • 0.0787 (14)
  • 0.0886 (14)
  • 0.094 (14)
  • 0.0984 (4)
  • 0.106 (5)
  • 0.125 (4)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (19)
  • K313 (23)
  • K420 (23)
  • K4H (14)
  • K68 (23)
  • KB1345 (14)
  • KB1630 (14)
  • KB5625 (10)
  • KC250 (19)
  • KC5010 (23)
  • KC5025 (23)
  • KC5410 (23)
  • KC710 (23)
  • KC720 (23)
  • KC722 (23)
  • KC730 (23)
  • KC732 (10)
  • KC810 (23)
  • KC850 (23)
  • KC910 (14)
  • KC9110 (23)
  • KC9120 (10)
  • KC9320 (23)
  • KC935 (23)
  • KC950 (23)
  • KCK20 (18)
  • KCK20B (23)
  • KCP10B (23)
  • KCP25B (23)
  • KCU10 (23)
  • KCU25 (23)
  • KD050 (5)
  • KD081 (10)
  • KD100 (12)
  • KD120 (14)
  • KD1425 (10)
  • KT175 (19)
  • KT315 (23)
  • KU10T (23)
  • KU25T (23)
  • KU30T (23)
  • KY3000 (14)
  • THM (19)
  • TN10P (16)
  • TN6010 (23)
  • TN6025 (23)
  • TN7110 (23)
  • WU10HT (5)
  • WU10PT (8)
  • WU25PT (5)
Hand Of Tool
  • L (13)
  • R (10)
Minimum Axial Groove Diameter
  • 0.0 (19)
  • 1.5748 (3)
  • 1.626 (8)
  • 1.874 (8)
  • 1.9685 (1)
  • 2.229 (8)
  • 2.252 (3)
  • 3.5 (16)
  • 5.5 (8)
  • 6.874 (8)
  • 8.252 (3)
  • 8.752 (3)
to
Minimum Axial Groove Diameter
  • 0.0 (19)
  • 40.0 (3)
  • 41.3 (8)
  • 47.6 (8)
  • 50.0 (1)
  • 56.625 (8)
  • 57.2 (3)
  • 88.9 (16)
  • 139.7 (8)
  • 174.6 (8)
  • 209.6 (3)
  • 222.3 (3)
to
Cutting Direction
  • E (9)
  • S (14)
Boring Bar Material
  • S (4)
frontEnd
Cutting Width
  • 0.5 (9)
  • 0.787 (9)
  • 0.8 (9)
  • 0.889 (9)
  • 0.991 (9)
  • 1.0 (19)
  • 1.041 (9)
  • 1.19 (14)
  • 1.194 (19)
  • 1.199 (5)
  • 1.2 (19)
  • 1.39 (9)
  • 1.397 (9)
  • 1.4 (9)
  • 1.473 (9)
  • 1.5 (19)
  • 1.56 (5)
  • 1.57 (14)
  • 1.575 (19)
  • 1.69 (9)
  • 1.7 (9)
  • 1.702 (9)
  • 1.75 (19)
  • 1.829 (10)
  • 1.94 (9)
  • 1.95 (9)
  • 1.956 (9)
  • 1.981 (10)
  • 2.0 (19)
  • 2.007 (9)
  • 2.2 (19)
  • 2.235 (19)
  • 2.24 (14)
  • 2.25 (14)
  • 2.388 (19)
  • 2.39 (5)
  • 2.464 (10)
  • 2.5 (19)
  • 2.667 (10)
  • 2.74 (9)
  • 2.743 (19)
  • 2.75 (19)
  • 2.794 (10)
  • 2.997 (19)
  • 3.0 (23)
  • 3.099 (10)
  • 3.17 (10)
  • 3.175 (23)
  • 3.18 (6)
  • 3.2 (23)
  • 3.245 (9)
  • 3.25 (10)
  • 3.251 (19)
  • 3.27 (9)
  • 3.32 (5)
  • 3.329 (5)
  • 3.5 (23)
  • 3.607 (10)
  • 3.73 (5)
  • 3.81 (9)
  • 3.84 (9)
  • 3.96 (10)
  • 3.962 (10)
  • 3.974 (5)
  • 3.988 (10)
  • 4.0 (14)
  • 4.24 (5)
  • 4.242 (14)
  • 4.25 (5)
  • 4.3 (10)
  • 4.5 (14)
  • 4.521 (10)
  • 4.699 (12)
  • 4.775 (14)
  • 4.78 (2)
  • 4.785 (2)
  • 4.788 (2)
  • 4.8 (10)
  • 4.801 (14)
  • 4.81 (10)
  • 4.88 (5)
  • 4.95 (10)
  • 5.0 (4)
  • 5.004 (4)
  • 5.131 (4)
  • 5.41 (4)
  • 5.5 (4)
  • 5.563 (4)
  • 6.0 (4)
  • 6.35 (4)
  • 6.36 (2)
  • 6.48 (4)
to
Cutting Width
  • 0.0197 (9)
  • 0.031 (9)
  • 0.0315 (9)
  • 0.035 (9)
  • 0.039 (9)
  • 0.0394 (19)
  • 0.041 (9)
  • 0.047 (19)
  • 0.0472 (19)
  • 0.055 (9)
  • 0.0551 (9)
  • 0.058 (9)
  • 0.0591 (19)
  • 0.062 (19)
  • 0.0669 (9)
  • 0.067 (9)
  • 0.0689 (19)
  • 0.072 (10)
  • 0.076 (9)
  • 0.0768 (9)
  • 0.077 (9)
  • 0.078 (10)
  • 0.0787 (19)
  • 0.079 (14)
  • 0.0866 (19)
  • 0.088 (19)
  • 0.0886 (14)
  • 0.094 (19)
  • 0.097 (10)
  • 0.0984 (19)
  • 0.105 (10)
  • 0.108 (19)
  • 0.1083 (19)
  • 0.11 (10)
  • 0.118 (19)
  • 0.1181 (23)
  • 0.122 (10)
  • 0.125 (23)
  • 0.126 (23)
  • 0.1278 (9)
  • 0.128 (19)
  • 0.129 (9)
  • 0.131 (5)
  • 0.1378 (23)
  • 0.142 (10)
  • 0.147 (5)
  • 0.15 (9)
  • 0.151 (9)
  • 0.156 (10)
  • 0.157 (10)
  • 0.1574 (14)
  • 0.1575 (14)
  • 0.167 (14)
  • 0.1673 (5)
  • 0.169 (10)
  • 0.1771 (14)
  • 0.1772 (14)
  • 0.178 (10)
  • 0.185 (12)
  • 0.188 (14)
  • 0.189 (14)
  • 0.192 (5)
  • 0.195 (10)
  • 0.1969 (4)
  • 0.197 (4)
  • 0.202 (4)
  • 0.213 (4)
  • 0.2165 (4)
  • 0.2166 (2)
  • 0.219 (4)
  • 0.2362 (4)
  • 0.25 (4)
  • 0.255 (4)
to
Insert Size
  • 2 (9)
  • 3 (10)
  • 4 (4)
Maximum Cutting Depth
  • 0.0 (13)
  • 3.51 (5)
  • 5.33 (5)
to
Maximum Cutting Depth
  • 0.0 (13)
  • 0.138 (1)
  • 0.1382 (4)
  • 0.2098 (4)
  • 0.21 (1)
to
insertGeometry
Cutting Tool Material
  • B H (14)
  • B L (10)
  • C N (14)
  • D P (12)
  • H T (23)
  • H W (23)
backEnd
System Size
  • KM20 (8)
  • KM25 (11)
  • KM3225 (4)
Back-End Diameter
  • 0.7874 (8)
  • 0.9843 (11)
  • 1.2598 (4)
to
Back-End Diameter
  • 20.0 (8)
  • 25.0 (11)
  • 32.0 (4)
to
other
Platform
  • KM20 (8)
  • KM25 (11)
  • KM3225 (4)
Tool Unit
  • I (11)
  • M (12)
Category Path
Over All Length [L]
  • 25.0 (4)
  • 30.0 (19)
to
Over All Length [L]
  • 0.9843 (4)
  • 1.1811 (19)
to
Insert Hand
  • L (11)
  • R (12)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Gewindedrehen

(10 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height Gage Insert Weight Kilograms Weight Pounds
2399494 KM25NER330 KM25NER330 KM25 30.0000 1.181 22.0000 .8661 12.5000 .4921 NG3L 0.19 0.42
    List price:
    $171.30 /each.
    Your price::
    2399495 KM25NEL330 KM25NEL330 KM25 30.0000 1.181 22.0000 .8661 12.5000 .4921 NG3R 0.19 0.42
      List price:
      $197.23 /each.
      Your price::
      2399496 KM25NER430 KM25NER430 KM25 30.0000 1.181 24.0000 .9449 12.5000 .4921 NG4L 0.19 0.43
        List price:
        $171.30 /each.
        Your price::
        3483034 KM20NER325 KM20NER325 KM20 25.0000 .9843 17.0000 .6693 9.5250 .3750 NG3L 0.10 0.22
          List price:
          $163.30 /each.
          Your price::
          2399462 KM25NER230 KM25NER230 KM25 30.0000 1.181 22.0000 .8661 12.5000 .4921 NG2L 0.18 0.39
            List price:
            $171.30 /each.
            Your price::
            2399493 KM25NEL230 KM25NEL230 KM25 30.0000 1.181 22.0000 .8661 12.5000 .4921 NG2R 0.18 0.39
              List price:
              $171.30 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor

              ORIGINAL PRODUCT

              KM Mini-Schneidköpfe zur Außenbearbeitung

              (9 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [CSMS] System Size Machine Side [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [H1] Cutting Height [H1] Cutting Height Gage Insert Weight Kilograms Weight Pounds
              2399498 KM25NSR230 KM25NSR230 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 NG2R 0.13 0.29
                List price:
                $171.30 /each.
                Your price::
                2399499 KM25NSL230 KM25NSL230 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 NG2L 0.13 0.29
                  List price:
                  $171.30 /each.
                  Your price::
                  2399500 KM25NSR330 KM25NSR330 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 NG3R 0.13 0.29
                    List price:
                    $171.30 /each.
                    Your price::
                    2399501 KM25NSL330 KM25NSL330 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 NG3L 0.13 0.29
                      List price:
                      $171.30 /each.
                      Your price::
                      2399503 KM25NSL430 KM25NSL430 KM25 30.0000 1.181 16.0000 .6299 12.5000 .4921 NG4L 0.12 0.26
                        List price:
                        $254.39 /each.
                        Your price::
                        3483027 KM20NSL330 KM20NSL330 KM20 30.0000 1.181 12.5000 .4921 9.5250 .3750 NG3L