successfully added to cart
View Cart
COVID-19: How WIDIA is responding
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (32)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (32)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (32)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (32)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (32)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (32)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (32)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (32)
  • M Stainless Steel (32)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (32)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (32)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (32)
  • K Cast Iron (32)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (32)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (32)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (32)
  • N Non-Ferrous Materials (32)
    • N1
      Wrought Aluminum
      (32)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (32)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (12)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (32)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (32)
    • N6
      Carbon, Graphite Composites, CFRP
      (32)
    • N7
      MMC's
      (32)
  • S High-Temp Alloys (32)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (32)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (32)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (32)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (32)
  • H Hardened Materials (32)
    • H1
      Hardened Materials 44-48 HRC
      (32)
    • H2
      Hardened Materials 48-55 HRC
      (32)
    • H3
      Hardened Materials 56-60 HRC
      (32)
    • H4
      Hardened Materials >60 HRC
      (32)
Applications
  • Back Boring Back Boring (9)
  • Chamfer Turning Chamfer Turning (9)
  • Cut-Off Cut-Off (32)
  • Deep Grooving Deep Grooving (32)
  • Face Grooving Face Grooving (32)
  • Facing Facing (32)
  • Grooving Grooving (32)
  • ID Facing ID Facing (32)
  • ID Grooving ID Grooving (32)
  • ID Thread Turning ID Thread Turning (9)
  • Multiple Direction Cutting Multiple Direction Cutting (9)
  • Plunge Turning Plunge Turning (9)
  • Profiling Profiling (9)
  • TRN Boring TRN Boring (32)
  • Threading Threading (9)
  • Turning Turning (32)
Cutting Condition
  • Heavily Interrupted Cut (32)
  • Interrupted (32)
  • Lightly Interrupted Cut (32)
  • Smooth Cut (32)
  • Varying Depth of Cut (32)
Tool Cutting Edge Angle
  • 45.0 (3)
  • 75.0 (6)
  • 90.0 (4)
  • 93.0 (9)
  • 95.0 (6)
  • 107.5 (4)
to
Connection Style
  • KM (14)
Cutting Edges Per Insert
  • 1.0 (17)
  • 2.0 (17)
  • 3.0 (8)
  • 4.0 (24)
  • 6.0 (8)
  • 8.0 (13)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.1 (12)
  • 0.102 (15)
  • 0.2 (12)
  • 0.203 (10)
  • 0.34 (5)
  • 0.397 (30)
  • 0.4 (32)
  • 0.406 (11)
  • 0.6 (2)
  • 0.79 (7)
  • 0.792 (9)
  • 0.794 (30)
  • 0.8 (32)
  • 1.188 (2)
  • 1.19 (4)
  • 1.191 (32)
  • 1.2 (32)
  • 1.587 (4)
  • 1.588 (27)
  • 1.6 (32)
  • 2.38 (2)
  • 2.381 (6)
  • 2.4 (15)
  • 3.18 (6)
  • 3.2 (8)
to
Corner Radius
  • 0.004 (17)
  • 0.008 (12)
  • 0.0083 (4)
  • 0.013 (5)
  • 0.0156 (32)
  • 0.016 (30)
  • 0.031 (30)
  • 0.0312 (30)
  • 0.0313 (32)
  • 0.0315 (4)
  • 0.0468 (2)
  • 0.0469 (32)
  • 0.047 (32)
  • 0.0472 (4)
  • 0.0516 (7)
  • 0.0625 (32)
  • 0.063 (26)
  • 0.0938 (21)
  • 0.094 (2)
  • 0.125 (6)
  • 0.126 (2)
  • 0.1563 (4)
  • 0.312 (5)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (30)
  • 241 (4)
  • CL4 (16)
  • CM2 (30)
  • CM3 (22)
  • CM4 (13)
  • CPX (30)
  • CW2 (9)
  • CW2015 (30)
  • CW5025 (26)
  • GX (17)
  • HK1500 (24)
  • HT2 (9)
  • HTX (4)
  • K060 (17)
  • K090 (30)
  • K1 (10)
  • K10M (32)
  • K10P (32)
  • K10U (25)
  • K15U (30)
  • K20K (32)
  • K21 (17)
  • K25M (30)
  • K25P (30)
  • K313 (32)
  • K35P (17)
  • K420 (25)
  • K45 (23)
  • K68 (30)
  • KB1340 (11)
  • KB1345 (10)
  • KB1610 (19)
  • KB1625 (17)
  • KB1630 (10)
  • KB5610 (12)
  • KB5625 (17)
  • KB5630 (10)
  • KB9610 (24)
  • KB9640 (13)
  • KBH10 (24)
  • KBH10B (15)
  • KBH20 (24)
  • KBH20B (15)
  • KBK35 (4)
  • KC210 (28)
  • KC250 (25)
  • KC5010 (32)
  • KC5025 (32)
  • KC5410 (32)
  • KC5510 (32)
  • KC5525 (23)
  • KC710 (4)
  • KC720 (27)
  • KC722 (4)
  • KC730 (27)
  • KC7310 (32)
  • KC732 (27)
  • KC8050 (32)
  • KC810 (32)
  • KC850 (32)
  • KC9010 (32)
  • KC9025 (32)
  • KC910 (32)
  • KC9105 (32)
  • KC9110 (32)
  • KC9120 (32)
  • KC9125 (32)
  • KC9125RR (7)
  • KC9140 (32)
  • KC9145 (32)
  • KC9210 (5)
  • KC9215 (32)
  • KC9225 (32)
  • KC9240 (32)
  • KC9240NEW (32)
  • KC9245 (32)
  • KC9315 (32)
  • KC9320 (32)
  • KC9325 (32)
  • KC935 (32)
  • KC950 (32)
  • KC990 (32)
  • KCD25 (6)
  • KCK05 (32)
  • KCK05B (32)
  • KCK15 (32)
  • KCK15B (32)
  • KCK20 (32)
  • KCK20B (32)
  • KCM15 (32)
  • KCM15B (32)
  • KCM25 (32)
  • KCM25B (32)
  • KCM35 (32)
  • KCM35B (20)
  • KCP05 (32)
  • KCP05B (24)
  • KCP10 (32)
  • KCP10B (32)
  • KCP25 (32)
  • KCP25B (32)
  • KCP30 (32)
  • KCP30B (32)
  • KCP40 (32)
  • KCP40B (32)
  • KCPK05 (32)
  • KCS10 (4)
  • KCS10B (26)
  • KCU10 (32)
  • KCU25 (32)
  • KD050 (23)
  • KD081 (23)
  • KD100 (10)
  • KD120 (23)
  • KD1400 (12)
  • KD1405 (10)
  • KD1425 (12)
  • KM1 (17)
  • KMF (4)
  • KT1120 (2)
  • KT125 (28)
  • KT150 (17)
  • KT175 (28)
  • KT315 (30)
  • KT325 (9)
  • KTP10 (6)
  • KU10T (30)
  • KU30T (32)
  • KY1310 (21)
  • KY1320 (32)
  • KY1540 (23)
  • KY1615 (30)
  • KY2000 (19)
  • KY2100 (17)
  • KY3000 (30)
  • KY3400 (27)
  • KY3500 (32)
  • KY4000 (13)
  • KY4300 (12)
  • KY4400 (32)
  • KYHK15B (32)
  • KYK10 (19)
  • KYK25 (27)
  • KYK35 (32)
  • KYS25 (17)
  • KYS30 (19)
  • NL200 (9)
  • NL250 (32)
  • NL300 (24)
  • NL400 (8)
  • NL920 (24)
  • P25 (17)
  • PB100 (4)
  • PB170 (4)
  • PB250 (4)
  • PB300 (4)
  • PS5 (9)
  • SP0819 (19)
  • SP0A00 (7)
  • SP3019 (21)
  • SP4019 (19)
  • SP61EJ (7)
  • THM (11)
  • THM-X (16)
  • THMF-X (11)
  • TN10P (32)
  • TN10U (30)
  • TN15M (32)
  • TN15U (30)
  • TN2000 (24)
  • TN20K (32)
  • TN20P (32)
  • TN30M (32)
  • TN30P (32)
  • TN4000 (24)
  • TN5015 (26)
  • TN5020 (26)
  • TN5105 (30)
  • TN5120 (32)
  • TN6010 (15)
  • TN6025 (11)
  • TN7005 (17)
  • TN7010 (32)
  • TN7015 (32)
  • TN7025 (32)
  • TN7035 (26)
  • TN7105 (11)
  • TN7110 (26)
  • TN7115 (32)
  • TN7125 (26)
  • TN7135 (26)
  • TN8025 (32)
  • TTI15 (9)
  • TTM09 (13)
  • TTR (17)
  • TTS (16)
  • TTX (15)
  • WBH10C (15)
  • WBH10P (10)
  • WBH10U (17)
  • WBH20P (15)
  • WBH25P (10)
  • WBH25U (22)
  • WBH30P (10)
  • WBK40U (11)
  • WBK45U (15)
  • WDN00U (10)
  • WDN25U (12)
  • WK05CT (32)
  • WK15CT (18)
  • WK20CT (32)
  • WM15CT (32)
  • WM25CT (32)
  • WM35CT (32)
  • WP05CT (6)
  • WP15CT (32)
  • WP25CT (32)
  • WP35CT (32)
  • WS10PT (32)
  • WS25PT (32)
  • WU10HT (32)
  • X00511 (4)
Hand Of Tool
  • L (7)
  • N (1)
  • R (6)
Wiper Insert
  • N (32)
  • Y (15)
Minimum Axial Groove Diameter
  • 3.386 (18)
to
Minimum Axial Groove Diameter
  • 86.0 (18)
to
Cutting Direction
  • S (14)
Rake Angle Style
  • DOUBLE NEGATIVE (11)
  • NEGATIVE-ZERO (3)
Maximum Bore Depth
  • 70.0 (18)
to
Maximum Bore Depth
  • 2.756 (18)
to
frontEnd
Clamp Style
  • D (32)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (7)
  • D-DIAMOND/RHOMBIC 55 (10)
  • S-SQUARE 90 (7)
  • T-TRIANGLE 60 (6)
  • W-TRIGON 80 (2)
insertGeometry
Cutting Tool Material
  • B H (30)
  • B L (30)
  • C A (32)
  • C N (32)
  • D P (17)
  • H T (30)
  • H W (32)
backEnd
Connection Type
  • TAPER SHANK (14)
System Size
  • KM4X63 (14)
Back-End Diameter
  • 2.5 (32)
to
Back-End Diameter
  • 63.0 (32)
to
other
Platform
  • KM4X63 (32)
Tool Unit
  • M (32)
Over All Length [L]
  • 70.0 (32)
to
Over All Length [L]
  • 2.756 (32)
to
Insert Hand
  • N (32)
obsoleteFacet
  • false (32)
  • true (32)
Cutting Condition Material
  • H-All (32)
  • K-All (32)
  • K1 (11)
  • M-All (32)
  • N-All (32)
  • P-All (32)
  • S-All (32)
  • S2 (32)
  • S4 (10)
No filters matching ""
View Products in
Metric
Inch
KM4X63 Schneidköpfe

(4 Products)
  • Shank: KM4X™Shank: KM4X™
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
5552674 KM4X63DCLNL12KC04 KM4X63DCLNL12KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 CN..120408/CN..432 1.40 3.09
    List price:
    $397.1 /each.
    Your price::
    Qty
    5552675 KM4X63DCLNL16KC06 KM4X63DCLNL16KC06 70.0000 2.756 43.0000 1.693 86.0000 3.386 CN..160612/CN..543 1.39 3.06
      List price:
      $397.1 /each.
      Your price::
      Qty
      5552676 KM4X63DCLNR12KC04 KM4X63DCLNR12KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 CN..120408/CN..432 1.40 3.08
        List price:
        $397.1 /each.
        Your price::
        Qty
        5543407 KM4X63DCLNR16KC06 KM4X63DCLNR16KC06 70.0000 2.756 43.0000 1.693 86.0000 3.386 CN..160612/CN..543 1.37 3.02
          List price:
          $397.1 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty
          KM4X63 Schneidköpfe

          (2 Products)
          • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
          • Shank: KM4X™Shank: KM4X™
          • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
          5543408 KM4X63DCRNL12KC04 KM4X63DCRNL12KC04 70.0000 2.756 38.0000 1.496 CN..120408/CN..432 1.41 3.12
            List price:
            $397.1 /each.
            Your price::
            Qty
            5543409 KM4X63DCRNR12KC04 KM4X63DCRNR12KC04 70.0000 2.756 38.0000 1.496 CN..120408/CN..432 1.41 3.10
              List price:
              $397.1 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              KM4X63 Schneidköpfe

              (4 Products)
              • Shank: KM4X™Shank: KM4X™
              • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
              • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
              5552677 KM4X63DDJNL15KC04 KM4X63DDJNL15KC04 70.0000 2.756 43.0000 1.693 DN..150408/DN..432 1.17 2.57
                List price:
                $397.1 /each.
                Your price::
                Qty
                5543450 KM4X63DDJNL15KC06 KM4X63DDJNL15KC06 70.0000 2.756 43.0000 1.693 DN..150608/DN..442 1.19 2.62
                  List price:
                  $397.1 /each.
                  Your price::
                  Qty
                  5552678 KM4X63DDJNR15KC04 KM4X63DDJNR15KC04 70.0000 2.756 43.0000 1.693 DN..150408/DN..432 1.19 2.63
                    List price:
                    $397.1 /each.
                    Your price::
                    Qty
                    5543451 KM4X63DDJNR15KC06 KM4X63DDJNR15KC06 70.0000 2.756 43.0000 1.693 DN..150608/DN..442 1.16 2.57
                      List price:
                      $397.1 /each.
                      Your price::
                      Qty
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty
                      KM4X63 Schneidköpfe

                      (4 Products)
                      • Shank: KM4X™Shank: KM4X™
                      • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                      • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                      5552679 KM4X63DDQNL15KC04 KM4X63DDQNL15KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 DN..150408/DN..432 1.29 2.84
                        List price:
                        $397.1 /each.
                        Your price::
                        Qty
                        5543452 KM4X63DDQNL15KC06 KM4X63DDQNL15KC06 70.0000 2.756 43.0000 1.693 86.0000 3.386 DN..150608/DN..442 1.29 2.83
                          List price:
                          $397.1 /each.
                          Your price::
                          Qty
                          5543453 KM4X63DDQNR15KC04 KM4X63DDQNR15KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 DN..150408/DN..432 1.29 2.85
                            List price:
                            $397.1 /each.
                            Your price::
                            Qty
                            5552710 KM4X63DDQNR15KC06 KM4X63DDQNR15KC06 70.0000 2.756 43.0000 1.693 86.0000 3.386 DN..150608/DN..442 1.29 2.85
                              List price:
                              $397.1 /each.
                              Your price::
                              Qty
                              List price:
                              Discount: %
                              Your price::
                              Replacement This item is not available
                              Replacement Product This item may be available through a distributor
                              Qty
                              KM4X63 Schneidköpfe

                              (3 Products)
                              • Shank: KM4X™Shank: KM4X™
                              • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                              • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                              View Products
                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                              5552711 KM4X63DDUNL15KC04 KM4X63DDUNL15KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 DN..150408/DN..432 1.40 3.09
                                List price:
                                $397.1 /each.
                                Your price::
                                Qty
                                5552712 KM4X63DDUNR15KC04 KM4X63DDUNR15KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 DN..150408/DN..432 1.41 3.10
                                  List price:
                                  $397.1 /each.
                                  Your price::
                                  Qty
                                  5543454 KM4X63DDUNR15KC06 KM4X63DDUNR15KC06 70.0000 2.756 43.0000 1.693 86.0000 3.386 DN..150608/DN..442 1.41 3.11
                                    List price:
                                    $397.1 /each.
                                    Your price::
                                    Qty
                                    List price:
                                    Discount: %
                                    Your price::
                                    Replacement This item is not available
                                    Replacement Product This item may be available through a distributor
                                    Qty
                                    KM4X63 Schneidköpfe

                                    (1 Products)
                                    • Shank: KM4X™Shank: KM4X™
                                    • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                    • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                    View Products
                                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                    5552713 KM4X63DSDNN12KC04 KM4X63DSDNN12KC04 70.0000 2.756 0.0000 .0000 SN..120408/SN..432 1.22 2.68
                                      List price:
                                      $397.1 /each.
                                      Your price::
                                      Qty
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty
                                      KM4X63 Schneidköpfe

                                      (2 Products)
                                      • Shank: KM4X™Shank: KM4X™
                                      • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                      • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                      5552714 KM4X63DSKNL12KC04 KM4X63DSKNL12KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 SN..120408/SN..432 1.46 3.22
                                        List price:
                                        $397.1 /each.
                                        Your price::
                                        Qty
                                        5552715 KM4X63DSKNR12KC04 KM4X63DSKNR12KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 SN..120408/SN..432 1.47 3.24
                                          List price:
                                          $397.1 /each.
                                          Your price::
                                          Qty
                                          List price:
                                          Discount: %
                                          Your price::
                                          Replacement This item is not available
                                          Replacement Product This item may be available through a distributor
                                          Qty
                                          KM4X63 Schneidköpfe

                                          (2 Products)
                                          • Shank: KM4X™Shank: KM4X™
                                          • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                          • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                          View Products
                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                          5552716 KM4X63DSRNL12KC04 KM4X63DSRNL12KC04 70.0000 2.756 38.0000 1.496 SN..120408/SN..432 1.37 3.01
                                            List price:
                                            $397.1 /each.
                                            Your price::
                                            Qty
                                            5552717 KM4X63DSRNR12KC04 KM4X63DSRNR12KC04 70.0000 2.756 38.0000 1.496 SN..120408/SN..432 1.37 3.01
                                              List price:
                                              $397.1 /each.
                                              Your price::
                                              Qty
                                              List price:
                                              Discount: %
                                              Your price::
                                              Replacement This item is not available
                                              Replacement Product This item may be available through a distributor
                                              Qty
                                              KM4X63 Schneidköpfe

                                              (2 Products)
                                              • Shank: KM4X™Shank: KM4X™
                                              • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                              • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                              View Products
                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [L1S] Secondary Tool Length [L1S] Secondary Tool Length [F] F Dimension [F] F Dimension [FS] Secondary F Dimension [FS] Secondary F Dimension Gage Insert Weight Kilograms Weight Pounds
                                              5552718 KM4X63DSSNL12KC04 KM4X63DSSNL12KC04 70.0000 2.756 78.3300 3.084 43.0000 1.693 34.6800 1.365 SN..120408/SN..432 1.41 3.11
                                                List price:
                                                $397.1 /each.
                                                Your price::
                                                Qty
                                                5552719 KM4X63DSSNR12KC04 KM4X63DSSNR12KC04 70.0000 2.756 78.3300 3.084 43.0000 1.693 34.6800 1.365 SN..120408/SN..432 1.41 3.10
                                                  List price:
                                                  $397.1 /each.
                                                  Your price::
                                                  Qty
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is not available
                                                  Replacement Product This item may be available through a distributor
                                                  Qty
                                                  KM4X63 Schneidköpfe

                                                  (2 Products)
                                                  • Shank: KM4X™Shank: KM4X™
                                                  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                                  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                  5552720 KM4X63DTFNL22KC04 KM4X63DTFNL22KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 TN..220408/TN..432 1.53 3.36
                                                    List price:
                                                    $397.1 /each.
                                                    Your price::
                                                    Qty
                                                    5552721 KM4X63DTFNR22KC04 KM4X63DTFNR22KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 TN..220408/TN..432 1.52 3.35
                                                      List price:
                                                      $397.1 /each.
                                                      Your price::
                                                      Qty
                                                      List price:
                                                      Discount: %
                                                      Your price::
                                                      Replacement This item is not available
                                                      Replacement Product This item may be available through a distributor
                                                      Qty
                                                      KM4X63 Schneidköpfe

                                                      (2 Products)
                                                      • Shank: KM4X™Shank: KM4X™
                                                      • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                                      • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                                      View Products
                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                                      5552722 KM4X63DTGNL22KC04 KM4X63DTGNL22KC04 70.0000 2.756 43.0000 1.693 TN..220408/TN..432 1.39 3.06
                                                        List price:
                                                        $397.1 /each.
                                                        Your price::
                                                        Qty
                                                        5552723 KM4X63DTGNR22KC04 KM4X63DTGNR22KC04 70.0000 2.756 43.0000 1.693 TN..220408/TN..432 1.39 3.06
                                                          List price:
                                                          $397.1 /each.
                                                          Your price::
                                                          Qty
                                                          List price:
                                                          Discount: %
                                                          Your price::
                                                          Replacement This item is not available
                                                          Replacement Product This item may be available through a distributor
                                                          Qty
                                                          KM4X63 Schneidköpfe

                                                          (2 Products)
                                                          • Shank: KM4X™Shank: KM4X™
                                                          • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                                          • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                                          View Products
                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                                          5552724 KM4X63DTJNL22KC04 KM4X63DTJNL22KC04 70.0000 2.756 43.0000 1.693 TN..220408/TN..432 1.39 3.06
                                                            List price:
                                                            $397.1 /each.
                                                            Your price::
                                                            Qty
                                                            5552725 KM4X63DTJNR22KC04 KM4X63DTJNR22KC04 70.0000 2.756 43.0000 1.693 TN..220408/TN..432 1.39 3.06
                                                              List price:
                                                              $397.1 /each.
                                                              Your price::
                                                              Qty
                                                              List price:
                                                              Discount: %
                                                              Your price::
                                                              Replacement This item is not available
                                                              Replacement Product This item may be available through a distributor
                                                              Qty
                                                              KM4X63 Schneidköpfe

                                                              (2 Products)
                                                              • Shank: KM4X™Shank: KM4X™
                                                              • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                                              • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                                              View Products
                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                              5543455 KM4X63DWLNL08KC04 KM4X63DWLNL08KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 WN..080408/WN..432 1.46 3.22
                                                                List price:
                                                                $397.1 /each.
                                                                Your price::
                                                                Qty
                                                                5552726 KM4X63DWLNR08KC04 KM4X63DWLNR08KC04 70.0000 2.756 43.0000 1.693 86.0000 3.386 WN..080408/WN..432 1.45 3.20
                                                                  List price:
                                                                  $397.1 /each.
                                                                  Your price::
                                                                  Qty
                                                                  List price:
                                                                  Discount: %
                                                                  Your price::
                                                                  Replacement This item is not available
                                                                  Replacement Product This item may be available through a distributor
                                                                  Qty
                                                                  If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                                  You are about to create a duplicate . Do you want to proceed?
                                                                  You are about to delete Do you want to proceed?
                                                                  What would you like to rename your to?
                                                                  Please enter a valid name
                                                                  Please enter a name for the duplicate
                                                                  Please enter a valid name
                                                                  You are about to add to your My Solutions page. Do you want to proceed?
                                                                  Please enter a valid name
                                                                  Send a copy of

                                                                  Please enter a valid Email
                                                                  Please enter a valid name

                                                                  We have found the following CAD Drawings

                                                                  Select the files you are looking for and download them all at once

                                                                  You should be logged to see your dashboard information
                                                                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                                  item(s) successfully added to the cart
                                                                  View Cart