Country

Język

Jednostka miary

Cena katalogowa:

Rabat: %

Cena katalogowa:

$40.70 /każdy

Twoja cena::

Ilość

Configure

ALUFLASH™ Series 3A09 • Square End • 3 Flute • Regular Length • Cylindrical Shank • Inch

SDS

ALUFLASH • Series 3A09 • Square End • 3 Flute • Regular Length • Cylindrical Shank • Inch

Name: ALUFLASH • Series 3A09 • Square End • 3 Flute • Regular Length • Cylindrical Shank • Inch
SKU: 6853347
Rating: 0 (0 reviews)

ALUFLASH™ Series 3A09 • Square End • 3 Flute • Regular Length • Cylindrical Shank • Inch

Metryczne

Calowe

SAP Material Number	6853347
ISO Catalog Number	3A09E05001SZT
ANSI Catalog Number	3A09E05001SZT
Grade	UNCOATED
Adapter Style Machine Side	Straight-Cylindrical
[D1] Effective Cutting Diameter	4.763 mm
[D1] Effective Cutting Diameter	.1875 in
[D] Adapter / Shank / Bore Diameter	4.763 mm
[D] Adapter / Shank / Bore Diameter	.1875 in
[AP1MAX] 1st Maximum Cutting Depth	7.938 mm
[AP1MAX] 1st Maximum Cutting Depth	.3125 in
[L] Overall Length	50.8 mm
[L] Overall Length	2 in
[Z] Number of Flutes	3

Zobacz wszystkie warianty produktów

Zastosowania

Trochoidal Milling
Drilling
Helical Milling
Plunge Milling
Ramping: Blank
Slotting: Square End
Side Milling/Shoulder Milling: Square End

Materiały przedmiotu obrabianego

N Non-Ferrous

Strona maszyny

ładowanie...

Strona przedmiotu obrabianego

ładowanie...

Kompatybilne części
Parametry skrawania

Material Group		Helical Interpolation / Ramping 0° - 15°	<="" td="">		<="" td="">	<="" td="" />
			UNCOATED			Recommended feed per tooth (fz = IPT) for helical interpolation and ramping fz x 1
			Cutting Speed Vc m/min			Diameter D1 [Ømin Ømax]
			Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
		Max Depth	Min	Start	Max	Decimals	.180-.180	.180-.297	.216-.356	.288-.475	.359-.594	.431-.713	.575-.950	.633-1.047	.719-1.188	.814-1.346	.863-1.425	1.150-1.900
N	1	1.25 x D1	1500	1800	6000	IPT	.0009	.0017	.0022	.0026	.0035	.0043	.0052	.0060	.0069	.0078	.0087	.0108
	2	1.25 x D1	1500	1800	4500	IPT	.0008	.0016	.0019	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097
	3	1.25 x D1	1500	1800	4500	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	4	1.25 x D1	1200	1350	2250	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	5	1.25 x D1	750	1200	3000	IPT	.0008	.0016	.0020	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097

Material Group		Helical Interpolation / Ramping 15° - 30°	<="" td="">		<="" td="">	<="" td="" />
			UNCOATED			Recommended feed per tooth (fz = IPT) for helical interpolation and ramping fz x 1
			Cutting Speed Vc m/min			Diameter D1 [Ømin Ømax]
			Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
		Max Depth	Min	Start	Max	Decimals	.180-.180	.180-.297	.216-.356	.288-.475	.359-.594	.431-.713	.575-.950	.633-1.047	.719-1.188	.814-1.346	.863-1.425	1.150-1.900
N	1	1.25 x D1	1500	1800	4800	IPT	.0006	.0013	.0016	.0019	.0026	.0032	.0039	.0045	.0052	.0058	.0065	.0081
	2	1.25 x D1	1500	1800	3600	IPT	.0006	.0012	.0014	.0018	.0023	.0029	.0035	.0041	.0047	.0053	.0058	.0073
	3	1.25 x D1	1500	1800	3600	IPT	.0005	.0009	.0011	.0014	.0018	.0023	.0027	.0032	.0036	.0041	.0045	.0057
	4	1.25 x D1	1200	1350	1800	IPT	.0005	.0009	.0011	.0014	.0018	.0023	.0027	.0032	.0036	.0041	.0045	.0057
	5	1.25 x D1	750	1200	2400	IPT	.0006	.0012	.0015	.0018	.0023	.0029	.0035	.0041	.0047	.0053	.0058	.0073

Material Group		Helical Interpolation / Ramping 30° - 45°	<="" td="">		<="" td="">	<="" td="" />
			UNCOATED			Recommended feed per tooth (fz = IPT) for helical interpolation and ramping fz x 1
			Cutting Speed Vc m/min			Diameter D1 [Ømin Ømax]
			Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
		Max Depth	Min	Start	Max	Decimals	.180-.180	.180-.297	.216-.356	.288-.475	.359-.594	.431-.713	.575-.950	.633-1.047	.719-1.188	.814-1.346	.863-1.425	1.150-1.900
N	1	1.25 x D1	1260	1500	2400	IPT	.0005	.0010	.0013	.0016	.0021	.0026	.0031	.0036	.0042	.0047	.0052	.0065
	2	1.25 x D1	1260	1500	2400	IPT	.0005	.0009	.0011	.0014	.0019	.0023	.0028	.0033	.0037	.0042	.0047	.0058
	3	1.25 x D1	1260	1500	2400	IPT	.0004	.0007	.0009	.0011	.0015	.0018	.0022	.0025	.0029	.0033	.0036	.0045
	4	1.25 x D1	1020	1140	1350	IPT	.0004	.0007	.0009	.0011	.0015	.0018	.0022	.0025	.0029	.0033	.0036	.0045
	5	1.25 x D1	630	1020	1800	IPT	.0005	.0009	.0012	.0014	.0019	.0023	.0028	.0033	.0037	.0042	.0047	.0058

Material Group		<="" td="">		<="" td="">	<="" td="" />
		Plunging/Drilling			UNCOATED			Recommended feed per revolution (fn =IPR) for plunging 2-flute end mills
					Cutting Speed Vc SFM				D1 Diameter
		Max Depth	Applicable	Coolant	Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
N	1	1.5 x D		Required	360	780	1200	IPR	.0031	.0047	.0053	.0059	.0063	.0079	.0087	.0093	.0098	.0104	.0110	.0118
	2	1.5 x D		Required	360	750	840	IPR	.0031	.0047	.0053	.0059	.0063	.0079	.0087	.0093	.0098	.0104	.0110	.0118
	3	1.5 x D		Required	300	600	780	IPR	.0031	.0047	.0053	.0059	.0063	.0079	.0087	.0093	.0098	.0104	.0110	.0118
	4	1 x D		Required	180	450	780	IPR	.0024	.0031	.0039	.0047	.0055	.0063	.0079	.0083	.0087	.0093	.0098	.0110
	5	1.5 x D		Required	180	600	1200	IPR	.0031	.0047	.0053	.0059	.0063	.0079	.0087	.0093	.0098	.0104	.0110	.0118

Material Group		<="" td="">		<="" td="">	<="" td="" />
		Plunging/Drilling			UNCOATED			Recommended feed per revolution (fn =IPR) for plunging 3-flute end mills
					Cutting Speed Vc SFM				D1 Diameter
		Max Depth	Applicable	Coolant	Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
N	1	1,5 x D		Required	360	780	1200	IPR	.0022	.0033	.0037	.0041	.0044	.0055	.0061	.0065	.0069	.0073	.0077	.0083
	2	1,5 x D		Required	360	750	840	IPR	.0022	.0033	.0037	.0041	.0044	.0055	.0061	.0065	.0069	.0073	.0077	.0083
	3	1,5 x D		Required	300	600	780	IPR	.0022	.0033	.0037	.0041	.0044	.0055	.0061	.0065	.0069	.0073	.0077	.0083
	4	1 x D		Required	180	450	780	IPR	.0017	.0022	.0028	.0033	.0039	.0044	.0055	.0058	.0061	.0065	.0069	.0077
	5	1,5 x D		Required	180	600	1200	IPR	.0022	.0033	.0037	.0041	.0044	.0055	.0061	.0065	.0069	.0073	.0077	.0083

Material Group		<="" td="">		<="" td="">	<="" td="" />
		Side Milling (A) and Slotting (B)			UNCOATED			Recommended feed per tooth (Fz = IPT) for side milling (A). For slotting (B), reduce Fz by 20%.
		A		B	Cutting Speed Vc SFM				D1 Diameter
		ap	ae	ap	Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
N	1	Ap1 max	0,5 x D1	1 x D	1500	1800	6000	IPT	.0009	.0017	.0022	.0026	.0035	.0043	.0052	.0060	.0069	.0078	.0087	.0108
	2	Ap1 max	0,5 x D1	1 x D	1500	1800	4500	IPT	.0008	.0016	.0019	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097
	3	Ap1 max	0,5 x D1	1 x D	1500	1800	4500	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	4	Ap1 max	0,5 x D1	1 x D	1200	1350	2250	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	5	Ap1 max	0,5 x D1	1 x D	750	1200	3000	IPT	.0008	.0016	.0020	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097

Material Group		<="" td="">		<="" td="">	<="" td="" />
		Side Milling (A) and Slotting (B)			UNCOATED			Recommended feed per tooth (Fz = IPT) for side milling (A). For slotting (B), reduce Fz by 20%.
		A		B	Cutting Speed Vc SFM				D1 Diameter
		ap	ae	ap	Min	Start	Max	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
N	1	Ap1 max	0,5 x D1	1 x D1	1500	1800	6000	IPT	.0009	.0017	.0022	.0026	.0035	.0043	.0052	.0060	.0069	.0078	.0087	.0108
	2	Ap1 max	0,5 x D1	1 x D1	1500	1800	4500	IPT	.0008	.0016	.0019	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097
	3	Ap1 max	0,5 x D1	1 x D1	1500	1800	4500	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	4	Ap1 max	0,5 x D1	1 x D1	1200	1350	2250	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	5	Ap1 max	0,5 x D1	1 x D1	750	1200	3000	IPT	.0008	.0016	.0020	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	Oznaczenie katalogowe ISO	Gatunek

Witamy

Potwierdź swoje preferencje

Aktualizuj preferencje

Sugestie dotyczące produktów

Product Family suggestions

Kontakt z Zespołem Sprzedaży

Kontakt z Zespołem Sprzedaży

Edytuj

Dodaj

ALUFLASH • Series 3A09 • Square End • 3 Flute • Regular Length • Cylindrical Shank • Inch

ALUFLASH™ Series 3A09 • Square End • 3 Flute • Regular Length • Cylindrical Shank • Inch

Zastosowania

Materiały przedmiotu obrabianego

Strona maszyny

Strona przedmiotu obrabianego

Sugestie dotyczące produktów

Product Family suggestions

Kontakt z Zespołem Sprzedaży

Powiadomienia

Kontakt z Zespołem Sprzedaży

Sending to SolidCAM in progress...

ALUFLASH • Series 3A09 • Square End • 3 Flute • Regular Length • Cylindrical Shank • Inch

ALUFLASH™ Series 3A09 • Square End • 3 Flute • Regular Length • Cylindrical Shank • Inch

Zastosowania

Materiały przedmiotu obrabianego

Strona maszyny

Strona przedmiotu obrabianego

The following files are available