Country

Język

Jednostka miary

Cena katalogowa:

Rabat: %

Cena katalogowa:

$81.24 /każdy

Twoja cena::

Ilość

SDS

GP End Mills • Series I3S • Sharp Edge • 3 Flute • Inch

Name: GP End Mills • Series I3S • Sharp Edge • 3 Flute • Inch
SKU: 6144162
Rating: 0 (0 reviews)

Series I3S • Inch

Metryczne

Calowe

SAP Material Number	6144162
ISO Catalog Number	I3S0500W200L
ANSI Catalog Number	I3S0500W200L
Grade	TIALN
Adapter Style Machine Side	Weldon
[Z] Number of Flutes	3
[D1] Effective Cutting Diameter	12.7 mm
[D1] Effective Cutting Diameter	.5 in
[D] Adapter / Shank / Bore Diameter	12.7 mm
[D] Adapter / Shank / Bore Diameter	.5 in
[AP1MAX] 1st Maximum Cutting Depth	50.8 mm
[AP1MAX] 1st Maximum Cutting Depth	2 in
[L] Overall Length	101.6 mm
[L] Overall Length	4 in

Zobacz wszystkie warianty produktów

Zastosowania

Ramping: Blank
Slotting: Square End
Side Milling/Shoulder Milling: Square End
Corner Style: Square End
Shank - Cylindrical Plain
Helix Angle: 30°
38571

Materiały przedmiotu obrabianego

P Steel

M Stainless Steel

K Cast Iron

N Non-Ferrous

Właściwości i zalety

Center cutting.

Strona maszyny

ładowanie...

Strona przedmiotu obrabianego

ładowanie...

Kompatybilne części
Parametry skrawania

Application Data • Series I3S..S I3S..R • TiAlN • Inch

		<="" td="">		<="" td="">	<="" td="" />
		Side Milling (A) and Slotting (B)			TiAlN			Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%.
		A		B	Cutting Speed vc SFM				D1 Diameter
								frac.	1/8	3/16	1/4	5/16	3/8	1/2	5/8	3/4	1
Material Group		ap	ae	ap	Min		Max	dec.	.1250	.1875	.2500	.3125	.3750	.5000	.6250	.7500	1.0000
P	0	2.0 x D	0.1 x D	0.5 x D	490	–	660	IPT	.0009	.0013	.0018	.0023	.0027	.0034	.0039	.0044	.0049
	1	2.0 x D	0.1 x D	0.5 x D	490	–	660	IPT	.0009	.0013	.0018	.0023	.0027	.0034	.0039	.0044	.0049
	2	2.0 x D	0.1 x D	0.5 x D	460	–	620	IPT	.0009	.0013	.0018	.0023	.0027	.0034	.0039	.0044	.0049
	3	2.0 x D	0.1 x D	0.5 x D	390	–	520	IPT	.0007	.0011	.0015	.0020	.0023	.0029	.0034	.0039	.0045
	4	2.0 x D	0.1 x D	0.5 x D	300	–	490	IPT	.0007	.0010	.0014	.0017	.0020	.0026	.0030	.0034	.0039
M	1	2.0 x D	0.1 x D	0.5 x D	300	–	380	IPT	.0007	.0011	.0015	.0020	.0023	.0029	.0034	.0039	.0045
	2	2.0 x D	0.1 x D	0.5 x D	200	–	260	IPT	.0006	.0009	.0012	.0016	.0018	.0023	.0027	.0031	.0036
K	1	2.0 x D	0.1 x D	0.5 x D	390	–	490	IPT	.0009	.0013	.0018	.0023	.0027	.0034	.0039	.0044	.0049
	2	2.0 x D	0.1 x D	0.5 x D	360	–	460	IPT	.0007	.0011	.0015	.0020	.0023	.0029	.0034	.0039	.0045

Series I3S..S I3S..R • Uncoated • 3-Flute Square-End End Mills

		<="" td="">		<="" td="">	<="" td="" />
		Side Milling (A) and Slotting (B)			Uncoated			Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%.
		A		B	Cutting Speed vc SFM				D1 Diameter
								frac.	1/8	3/16	1/4	5/16	3/8	1/2	5/8	3/4	1
Material Group		ap	ae	ap	Min		Max	dec.	.1250	.1875	.2500	.3125	.3750	.5000	.6250	.7500	1.0000
P	0	2.0 x D	0.1 x D	0.5 x D	490	–	660	IPT	.0009	.0013	.0018	.0023	.0027	.0034	.0039	.0044	.0049
	1	2.0 x D	0.1 x D	0.5 x D	490	–	660	IPT	.0009	.0013	.0018	.0023	.0027	.0034	.0039	.0044	.0049
	2	2.0 x D	0.1 x D	0.5 x D	460	–	620	IPT	.0009	.0013	.0018	.0023	.0027	.0034	.0039	.0044	.0049
N	1	Ap1 max	0.1 x D	0.5 x D	650	–	2600	IPT	.0013	.0019	.0025	.0031	.0038	.0050	.0063	.0075	.0100
	2	Ap1 max	0.1 x D	0.5 x D	650	–	2000	IPT	.0010	.0015	.0020	.0025	.0030	.0040	.0050	.0060	.0080
	5	Ap1 max	0.1 x D	0.5 x D	650	–	2000	IPT	.0011	.0017	.0023	.0028	.0034	.0045	.0056	.0068	.0090

Application Data • Series I3S..L I3S..X • TiAlN • Inch

		<="" td="">		<="" td="" />
		Side Milling (A)		TiAlN			Recommended feed per tooth (IPT = inch/th) for side milling (A).
		A		Cutting Speed vc SFM				D1 Diameter
							frac.	1/8	3/16	1/4	5/16	3/8	1/2	5/8	3/4	1
Material Group		ap	ae	Min		Max	dec.	.1250	.1875	.2500	.3125	.3750	.5000	.6250	.7500	1.0000
P	0	2.0 x D	0.1 x D	490	–	660	IPT	.0009	.0013	.0018	.0023	.0027	.0034	.0039	.0044	.0049
	1	2.0 x D	0.1 x D	490	–	660	IPT	.0009	.0013	.0018	.0023	.0027	.0034	.0039	.0044	.0049
	2	2.0 x D	0.1 x D	460	–	620	IPT	.0009	.0013	.0018	.0023	.0027	.0034	.0039	.0044	.0049
	3	2.0 x D	0.1 x D	390	–	520	IPT	.0007	.0011	.0015	.0020	.0023	.0029	.0034	.0039	.0045
	4	2.0 x D	0.1 x D	300	–	490	IPT	.0007	.0010	.0014	.0017	.0020	.0026	.0030	.0034	.0039
M	1	2.0 x D	0.1 x D	300	–	380	IPT	.0007	.0011	.0015	.0020	.0023	.0029	.0034	.0039	.0045
	2	2.0 x D	0.1 x D	200	–	260	IPT	.0006	.0009	.0012	.0016	.0018	.0023	.0027	.0031	.0036
K	1	2.0 x D	0.1 x D	390	–	490	IPT	.0009	.0013	.0018	.0023	.0027	.0034	.0039	.0044	.0049
	2	2.0 x D	0.1 x D	360	–	460	IPT	.0007	.0011	.0015	.0020	.0023	.0029	.0034	.0039	.0045

Application Data • Series I3S..L I3S..X • Uncoated • Inch

		<="" td="">		<="" td="" />
		Side Milling (A)		Uncoated			Recommended feed per tooth (IPT = inch/th) for side milling (A).
		A		Cutting Speed vc SFM				D1 Diameter
							frac.	1/8	3/16	1/4	5/16	3/8	1/2	5/8	3/4	1
Material Group		ap	ae	Min		Max	dec.	.1250	.1875	.2500	.3125	.3750	.5000	.6250	.7500	1.0000
P	0	2.0 x D	0.1 x D	490	–	660	IPT	.0009	.0013	.0018	.0023	.0027	.0034	.0039	.0044	.0049
	1	2.0 x D	0.1 x D	490	–	660	IPT	.0009	.0013	.0018	.0023	.0027	.0034	.0039	.0044	.0049
	2	2.0 x D	0.1 x D	460	–	620	IPT	.0009	.0013	.0018	.0023	.0027	.0034	.0039	.0044	.0049
N	1	Ap1 max	0.1 x D	650	–	2600	IPT	.0013	.0019	.0025	.0031	.0038	.0050	.0063	.0075	.0100
	2	Ap1 max	0.1 x D	650	–	2000	IPT	.0010	.0015	.0020	.0025	.0030	.0040	.0050	.0060	.0080
	5	Ap1 max	0.1 x D	650	–	2000	IPT	.0011	.0017	.0023	.0028	.0034	.0045	.0056	.0068	.0090

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	Oznaczenie katalogowe ISO	Gatunek

Witamy

Potwierdź swoje preferencje

Aktualizuj preferencje

Sugestie dotyczące produktów

Product Family suggestions

Kontakt z Zespołem Sprzedaży

Kontakt z Zespołem Sprzedaży

Edytuj

Dodaj