Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle
Ürün Önerileri
Product Family suggestions
Merhaba, User Name
Seçtiğiniz Hesap:
There is an issue with your account. Please contact customer support.
Sold To Account
Hesabı Değiştir
Ship To Account
Hesabı Değiştir
- Kontrol Paneli
- Siparişleri Yönet
- Kanalları Yönet
- Adres Defteri
-
Bildirimler
Tümünü okundu olarak işaretle - Parolayı Değiştir
- Profilim
- Oturumu Kapat
Ürün(ler)
sepete başarıyla eklendi
Sepeti Görüntüle
Sepeti Görüntüle
Güçlü takımlama çözümleri indirimde.
Şimdi satın alın.
Ürün(ler)
sepete başarıyla eklendi
Sepeti Görüntüle
Sepeti Görüntüle
Editing Solution
Adding Solution
Solution Name: {{SolutionName}}- Ürünler
- /
- ALUFLASH• 3A09 Serisi • Dik kenar uç • 3 Kanal • Standart boy • Silindirik şaft • Metrik
Sending to SolidCAM in progress...
Downloaded file will be available after import in the SolidCAM tool library.
ALUFLASH• 3A09 Serisi • Dik kenar uç • 3 Kanal • Standart boy • Silindirik şaft • Metrik
ALUFLASH™ 3A09 Serisi • Dik kenar uç • 3 Kanal • Standart boy • Silindirik şaft • Metrik
Kullanım ve uygulama alanları
- Trochoidal Milling
- Drilling
- Helical Milling
- Plunge Milling
- Ramping: Blank
- Slotting: Square End
- Side Milling/Shoulder Milling: Square End
Material
|
螺旋插补/坡铣 0° - 15° | <="" td=""> | <="" td=""> | <="" td="" /> | ||||||||||||||
UNCOATED | Recommended feed per tooth (fz = mm/z) for helical interpolation and ramping
|
|||||||||||||||||
Cutting Speed
|
Diameter
|
|||||||||||||||||
最大深度 | Min | Start | Max | mm | 3,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | ||
mm | 2,5-4,8 | 4,6-7,6 | 5,8-9,5 | 6,9-11,4 | 9,2-15,2 | 11,5-19,0 | 13,8-22,8 | 16,1-26,6 | 18,4-30,4 | 20,7-34,2 | 23,0-38,0 | 28,8-47,5 | ||||||
N | 1 | 1,25 x D1 | 500 | 600 | 2000 | fz | 0,022 | 0,044 | 0,055 | 0,066 | 0,088 | 0,110 | 0,132 | 0,153 | 0,176 | 0,198 | 0,220 | 0,275 |
2 | 1,25 x D1 | 500 | 600 | 1500 | fz | 0,020 | 0,040 | 0,048 | 0,059 | 0,079 | 0,099 | 0,119 | 0,138 | 0,158 | 0,178 | 0,198 | 0,247 | |
3 | 1,25 x D1 | 500 | 600 | 1500 | fz | 0,015 | 0,031 | 0,038 | 0,046 | 0,062 | 0,077 | 0,092 | 0,107 | 0,123 | 0,138 | 0,154 | 0,192 | |
4 | 1,25 x D1 | 400 | 450 | 750 | fz | 0,015 | 0,031 | 0,038 | 0,046 | 0,062 | 0,077 | 0,092 | 0,107 | 0,123 | 0,138 | 0,154 | 0,192 | |
5 | 1,25 x D1 | 250 | 400 | 1000 | fz | 0,020 | 0,040 | 0,050 | 0,059 | 0,079 | 0,099 | 0,119 | 0,138 | 0,158 | 0,178 | 0,198 | 0,247 |
Material
|
螺旋插补/坡铣 15° - 30° | <="" td=""> | <="" td=""> | <="" td="" /> | ||||||||||||||
UNCOATED | Recommended feed per tooth (fz = mm/z) for helical interpolation and ramping
|
|||||||||||||||||
Cutting Speed
|
Diameter
|
|||||||||||||||||
最大深度 | Min | Start | Max | mm | 3,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | ||
mm | 2,5-4,8 | 4,6-7,6 | 5,8-9,5 | 6,9-11,4 | 9,2-15,2 | 11,5-19,0 | 13,8-22,8 | 16,1-26,6 | 18,4-30,4 | 20,7-34,2 | 23,0-38,0 | 28,8-47,5 | ||||||
N | 1 | 1,25 x D1 | 500 | 600 | 1600 | fz | 0,017 | 0,033 | 0,041 | 0,050 | 0,066 | 0,082 | 0,099 | 0,115 | 0,132 | 0,148 | 0,165 | 0,206 |
2 | 1,25 x D1 | 500 | 600 | 1200 | fz | 0,015 | 0,030 | 0,036 | 0,045 | 0,059 | 0,074 | 0,089 | 0,104 | 0,119 | 0,134 | 0,148 | 0,185 | |
3 | 1,25 x D1 | 500 | 600 | 1200 | fz | 0,012 | 0,023 | 0,029 | 0,035 | 0,046 | 0,058 | 0,069 | 0,080 | 0,092 | 0,104 | 0,115 | 0,144 | |
4 | 1,25 x D1 | 400 | 450 | 600 | fz | 0,012 | 0,023 | 0,029 | 0,035 | 0,046 | 0,058 | 0,069 | 0,080 | 0,092 | 0,104 | 0,115 | 0,144 | |
5 | 1,25 x D1 | 250 | 400 | 800 | fz | 0,015 | 0,030 | 0,038 | 0,045 | 0,059 | 0,074 | 0,089 | 0,104 | 0,119 | 0,134 | 0,148 | 0,185 |
Material
|
螺旋插补/坡铣 30° - 45° | <="" td=""> | <="" td=""> | <="" td="" /> | ||||||||||||||
UNCOATED | Recommended feed per tooth (fz = mm/z) for helical interpolation and ramping
|
|||||||||||||||||
Cutting Speed
|
Diameter
|
|||||||||||||||||
最大深度 | Min | Start | Max | mm | 3,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | ||
mm | 2,5-4,8 | 4,6-7,6 | 5,8-9,5 | 6,9-11,4 | 9,2-15,2 | 11,5-19,0 | 13,8-22,8 | 16,1-26,6 | 18,4-30,4 | 20,7-34,2 | 23,0-38,0 | 28,8-47,5 | ||||||
N | 1 | 1,25 x D1 | 420 | 500 | 800 | fz | 0,013 | 0,026 | 0,033 | 0,040 | 0,053 | 0,066 | 0,079 | 0,092 | 0,106 | 0,119 | 0,132 | 0,165 |
2 | 1,25 x D1 | 420 | 500 | 800 | fz | 0,012 | 0,024 | 0,029 | 0,036 | 0,048 | 0,059 | 0,071 | 0,083 | 0,095 | 0,107 | 0,119 | 0,148 | |
3 | 1,25 x D1 | 420 | 500 | 800 | fz | 0,009 | 0,018 | 0,023 | 0,028 | 0,037 | 0,046 | 0,055 | 0,064 | 0,074 | 0,083 | 0,092 | 0,115 | |
4 | 1,25 x D1 | 340 | 380 | 450 | fz | 0,009 | 0,018 | 0,023 | 0,028 | 0,037 | 0,046 | 0,055 | 0,064 | 0,074 | 0,083 | 0,092 | 0,115 | |
5 | 1,25 x D1 | 210 | 340 | 600 | fz | 0,012 | 0,024 | 0,030 | 0,036 | 0,048 | 0,059 | 0,071 | 0,083 | 0,095 | 0,107 | 0,119 | 0,148 |
Material
|
<="" td=""> | <="" td=""> | <="" td="" /> | |||||||||||||||||
Plunging/Drilling | UNCOATED | Recommended feed per revolution (fn =mm/rev) for plunging 3-flute end mills | ||||||||||||||||||
Cutting Speed
|
D1
|
|||||||||||||||||||
Max Depth | Applicable | Coolant | Min | Start | Max | mm | 2,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | ||
N | 1 | 1,5 x D | Required | 120 | 260 | 400 | fn | 0,056 | 0,084 | 0,095 | 0,105 | 0,112 | 0,140 | 0,154 | 0,165 | 0,175 | 0,186 | 0,196 | 0,210 | |
2 | 1,5 x D | Required | 120 | 250 | 280 | fn | 0,056 | 0,084 | 0,095 | 0,105 | 0,112 | 0,140 | 0,154 | 0,165 | 0,175 | 0,186 | 0,196 | 0,210 | ||
3 | 1,5 x D | Required | 100 | 200 | 260 | fn | 0,056 | 0,084 | 0,095 | 0,105 | 0,112 | 0,140 | 0,154 | 0,165 | 0,175 | 0,186 | 0,196 | 0,210 | ||
4 | 1 x D | Required | 60 | 150 | 260 | fn | 0,042 | 0,056 | 0,070 | 0,084 | 0,098 | 0,112 | 0,140 | 0,147 | 0,154 | 0,165 | 0,175 | 0,196 | ||
5 | 1,5 x D | Required | 60 | 200 | 400 | fn | 0,056 | 0,084 | 0,095 | 0,105 | 0,112 | 0,140 | 0,154 | 0,165 | 0,175 | 0,186 | 0,196 | 0,210 |
Material
|
<="" td=""> | <="" td=""> | <="" td="" /> | |||||||||||||||||
Plunging/Drilling | UNCOATED | Recommended feed per revolution (fn =mm/rev) for plunging 2-flute end mills | ||||||||||||||||||
Cutting Speed
|
D1
|
|||||||||||||||||||
Max Depth | Applicable | Coolant | Min | Start | Max | mm | 2,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | ||
N | 1 | 1,5 x D | Required | 120 | 260 | 400 | fn | 0,080 | 0,120 | 0,135 | 0,150 | 0,160 | 0,200 | 0,220 | 0,235 | 0,250 | 0,265 | 0,280 | 0,300 | |
2 | 1,5 x D | Required | 120 | 250 | 280 | fn | 0,080 | 0,120 | 0,135 | 0,150 | 0,160 | 0,200 | 0,220 | 0,235 | 0,250 | 0,265 | 0,280 | 0,300 | ||
3 | 1,5 x D | Required | 100 | 200 | 260 | fn | 0,080 | 0,120 | 0,135 | 0,150 | 0,160 | 0,200 | 0,220 | 0,235 | 0,250 | 0,265 | 0,280 | 0,300 | ||
4 | 1 x D | Required | 60 | 150 | 260 | fn | 0,060 | 0,080 | 0,100 | 0,120 | 0,140 | 0,160 | 0,200 | 0,210 | 0,220 | 0,235 | 0,250 | 0,280 | ||
5 | 1,5 x D | Required | 60 | 200 | 400 | fn | 0,080 | 0,120 | 0,135 | 0,150 | 0,160 | 0,200 | 0,220 | 0,235 | 0,250 | 0,265 | 0,280 | 0,300 |
Material
|
<="" td=""> | <="" td=""> | <="" td="" /> | |||||||||||||||||
Side Milling (A) and Slotting (B) | UNCOATED | Recommended feed per tooth (fz = mm/z) for side milling (A). For slotting (B), reduce fz by 20%. | ||||||||||||||||||
A | B | Cutting Speed
|
D1
|
|||||||||||||||||
ap | ae | ap | Min | Start | Max | mm | 2,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | ||
N | 1 | Ap1 max | 0,5 x D1 | 1 x D | 500 | 600 | 2000 | fz | 0,022 | 0,044 | 0,055 | 0,066 | 0,088 | 0,110 | 0,132 | 0,153 | 0,176 | 0,198 | 0,220 | 0,275 |
2 | Ap1 max | 0,5 x D1 | 1 x D | 500 | 600 | 1500 | fz | 0,020 | 0,040 | 0,048 | 0,059 | 0,079 | 0,099 | 0,119 | 0,138 | 0,158 | 0,178 | 0,198 | 0,247 | |
3 | Ap1 max | 0,5 x D1 | 1 x D | 500 | 600 | 1500 | fz | 0,015 | 0,031 | 0,038 | 0,046 | 0,062 | 0,077 | 0,092 | 0,107 | 0,123 | 0,138 | 0,154 | 0,192 | |
4 | Ap1 max | 0,5 x D1 | 1 x D | 400 | 450 | 750 | fz | 0,015 | 0,031 | 0,038 | 0,046 | 0,062 | 0,077 | 0,092 | 0,107 | 0,123 | 0,138 | 0,154 | 0,192 | |
5 | Ap1 max | 0,5 x D1 | 1 x D | 250 | 400 | 1000 | fz | 0,020 | 0,040 | 0,050 | 0,059 | 0,079 | 0,099 | 0,119 | 0,138 | 0,158 | 0,178 | 0,198 | 0,247 |
Material
|
<="" td=""> | <="" td=""> | <="" td="" /> | |||||||||||||||||
Side Milling (A) and Slotting (B) | UNCOATED | Recommended feed per tooth (fz = mm/z) for side milling (A). For slotting (B), reduce fz by 20%. | ||||||||||||||||||
A | B | Cutting Speed
|
D1
|
|||||||||||||||||
ap | ae | ap | Min | Start | Max | mm | 2,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | ||
N | 1 | Ap1 max | 0,5 x D1 | 1 x D | 500 | 600 | 2000 | fz | 0,022 | 0,044 | 0,055 | 0,066 | 0,088 | 0,110 | 0,132 | 0,153 | 0,176 | 0,198 | 0,220 | 0,275 |
2 | Ap1 max | 0,5 x D1 | 1 x D | 500 | 600 | 1500 | fz | 0,020 | 0,040 | 0,048 | 0,059 | 0,079 | 0,099 | 0,119 | 0,138 | 0,158 | 0,178 | 0,198 | 0,247 | |
3 | Ap1 max | 0,5 x D1 | 1 x D | 500 | 600 | 1500 | fz | 0,015 | 0,031 | 0,038 | 0,046 | 0,062 | 0,077 | 0,092 | 0,107 | 0,123 | 0,138 | 0,154 | 0,192 | |
4 | Ap1 max | 0,5 x D1 | 1 x D | 400 | 450 | 750 | fz | 0,015 | 0,031 | 0,038 | 0,046 | 0,062 | 0,077 | 0,092 | 0,107 | 0,123 | 0,138 | 0,154 | 0,192 | |
5 | Ap1 max | 0,5 x D1 | 1 x D | 250 | 400 | 1000 | fz | 0,020 | 0,040 | 0,050 | 0,059 | 0,079 | 0,099 | 0,119 | 0,138 | 0,158 | 0,178 | 0,198 | 0,247 |