Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

WIDIA Hizmetinizde

Müşteri Destek

Bütün dünyadaki müşteri destek iletişim detaylarını bulun.

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Güçlü takımlama çözümleri indirimde. Şimdi satın alın.

VariMill™

Filtreleri Seçin
Filtreler
Filtreler
    Filtreleri şurada görüntüle
    Metrik
    İnç
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (1154)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(801)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(801)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(801)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(801)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1013)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1154)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1112)
    • M Stainless Steel (1123)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1123)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1123)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1123)
    • K Cast Iron (895)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(895)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(895)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(895)
    • N Non-Ferrous Materials (12)
      • N6
        Carbon, Graphite Composites, CFRP (12)
    • S High-Temp Alloys (1154)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1154)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1154)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1154)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1154)
    • H Hardened Materials (1154)
      • H1
        Hardened Materials 44-48 HRC(1154)
      • H2
        Hardened Materials 48-55 HRC(829)
      • H3
        Hardened Materials 56-60 HRC(61)
      • H4
        Hardened Materials >60 HRC(61)
    Select All Star
    • CN (86)
    • DE (222)
    • GB (62)
    • IN (23)
    • SG (45)
    • TR (2)
    • US (449)
    Applications
    Applications
    • DrillingDrilling (42)
    • Face MillingFace Milling (504)
    • Flat Bottom DrillingFlat Bottom Drilling (45)
    • PocketPocket (871)
    • Pocket HelicalPocket Helical (810)
    • Pocket MillingPocket Milling (875)
    • Pocket Plunge MillingPocket Plunge Milling (65)
    • Profile MillingProfile Milling (35)
    • RampingRamping (958)
    • Shoulder Ball NoseShoulder Ball Nose (40)
    • Shoulder MillingShoulder Milling (1076)
    • Shoulder RoughingShoulder Roughing (227)
    • Shoulder Square EndShoulder Square End (1058)
    • Slot Ball NoseSlot Ball Nose (381)
    • Slot MillingSlot Milling (978)
    • Slot Square EndSlot Square End (946)
    • Trochoidal MillingTrochoidal Milling (149)
    Cutting Diameter
    Cutting Diameter
    • 0.125 in(12)
    • 0.157 in(15)
    • 0.187 in(3)
    • 0.188 in(28)
    • 0.197 in(15)
    • 0.237 in(34)
    • 0.25 in(66)
    • 0.276 in(6)
    • 0.312 in(2)
    • 0.313 in(31)
    • 0.315 in(43)
    • 0.354 in(3)
    • 0.375 in(89)
    • 0.394 in(61)
    • 0.433 in(1)
    • 0.438 in(10)
    • 0.473 in(70)
    • 0.5 in(169)
    • 0.551 in(9)
    • 0.625 in(93)
    • 0.63 in(69)
    • 0.709 in(3)
    • 0.75 in(152)
    • 0.787 in(58)
    • 0.984 in(20)
    • 1.0 in(86)
    • 1.25 in(7)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 3.176 mm(12)
    • 4.0 mm(15)
    • 4.75 mm(3)
    • 4.775 mm(28)
    • 5.0 mm(15)
    • 6.0 mm(34)
    • 6.351 mm(66)
    • 7.0 mm(6)
    • 7.926 mm(2)
    • 7.95 mm(31)
    • 8.0 mm(43)
    • 9.0 mm(3)
    • 9.525 mm(89)
    • 10.0 mm(61)
    • 11.0 mm(1)
    • 11.125 mm(10)
    • 12.0 mm(70)
    • 12.701 mm(169)
    • 14.0 mm(9)
    • 15.875 mm(93)
    • 16.0 mm(69)
    • 18.0 mm(3)
    • 19.05 mm(152)
    • 20.0 mm(58)
    • 25.0 mm(20)
    • 25.401 mm(86)
    • 31.75 mm(7)
    Cutting Diameter Min-Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 4.75 mm(1)
    Maximum Cutting Diameter Min-Maximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.187 in(1)
    Maximum Cutting Diameter Min-Maximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 6.351 mm(4)
    • 7.95 mm(8)
    • 9.0 mm(2)
    • 9.525 mm(21)
    • 10.0 mm(2)
    • 11.0 mm(5)
    • 12.0 mm(13)
    • 12.701 mm(38)
    • 13.0 mm(40)
    • 14.0 mm(2)
    • 14.3 mm(3)
    • 15.875 mm(58)
    • 16.0 mm(25)
    • 19.0 mm(23)
    • 19.05 mm(62)
    • 20.0 mm(1)
    • 20.651 mm(4)
    • 22.0 mm(50)
    • 22.225 mm(50)
    • 24.0 mm(4)
    • 25.401 mm(46)
    • 26.0 mm(63)
    • 28.576 mm(18)
    • 30.0 mm(2)
    • 31.75 mm(130)
    • 32.0 mm(62)
    • 36.0 mm(2)
    • 38.0 mm(44)
    • 38.1 mm(81)
    • 40.0 mm(5)
    • 41.276 mm(38)
    • 44.45 mm(33)
    • 45.0 mm(15)
    • 47.625 mm(4)
    • 48.0 mm(7)
    • 50.0 mm(2)
    • 50.801 mm(16)
    • 51.0 mm(1)
    • 53.975 mm(8)
    • 56.0 mm(3)
    • 57.0 mm(2)
    • 57.151 mm(49)
    • 60.0 mm(5)
    • 63.5 mm(15)
    • 64.0 mm(6)
    • 66.675 mm(4)
    • 72.0 mm(1)
    • 76.0 mm(2)
    • 76.2 mm(24)
    • 79.375 mm(2)
    • 80.0 mm(9)
    • 82.551 mm(13)
    • 95.25 mm(3)
    • 100.0 mm(8)
    • 101.601 mm(13)
    • 102.0 mm(1)
    • 127.0 mm(3)
    Cutting Length Min-Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.25 in(4)
    • 0.313 in(8)
    • 0.354 in(2)
    • 0.375 in(21)
    • 0.394 in(2)
    • 0.433 in(5)
    • 0.473 in(13)
    • 0.5 in(38)
    • 0.512 in(40)
    • 0.551 in(2)
    • 0.564 in(3)
    • 0.625 in(58)
    • 0.63 in(25)
    • 0.748 in(23)
    • 0.75 in(62)
    • 0.787 in(1)
    • 0.814 in(4)
    • 0.866 in(50)
    • 0.875 in(50)
    • 0.946 in(4)
    • 1.0 in(46)
    • 1.024 in(63)
    • 1.125 in(18)
    • 1.181 in(2)
    • 1.25 in(130)
    • 1.26 in(62)
    • 1.417 in(2)
    • 1.496 in(44)
    • 1.5 in(81)
    • 1.575 in(5)
    • 1.625 in(38)
    • 1.75 in(33)
    • 1.772 in(15)
    • 1.875 in(4)
    • 1.891 in(7)
    • 1.969 in(2)
    • 2.0 in(16)
    • 2.008 in(1)
    • 2.125 in(8)
    • 2.205 in(3)
    • 2.244 in(2)
    • 2.25 in(49)
    • 2.362 in(5)
    • 2.5 in(15)
    • 2.52 in(6)
    • 2.625 in(4)
    • 2.835 in(1)
    • 2.992 in(2)
    • 3.0 in(24)
    • 3.125 in(2)
    • 3.15 in(9)
    • 3.25 in(13)
    • 3.75 in(3)
    • 3.938 in(8)
    • 4.0 in(13)
    • 4.016 in(1)
    • 5.0 in(3)
    Cutting Length Min-Cutting Length Max
    Reach
    Reach
    • 0.25 in(4)
    • 0.313 in(4)
    • 0.375 in(9)
    • 0.433 in(5)
    • 0.473 in(6)
    • 0.5 in(22)
    • 0.512 in(23)
    • 0.551 in(1)
    • 0.591 in(4)
    • 0.625 in(32)
    • 0.63 in(18)
    • 0.703 in(1)
    • 0.709 in(10)
    • 0.748 in(8)
    • 0.75 in(44)
    • 0.787 in(2)
    • 0.828 in(4)
    • 0.866 in(15)
    • 0.875 in(38)
    • 0.946 in(15)
    • 0.984 in(2)
    • 1.0 in(17)
    • 1.024 in(23)
    • 1.063 in(6)
    • 1.125 in(5)
    • 1.181 in(24)
    • 1.25 in(92)
    • 1.26 in(30)
    • 1.375 in(7)
    • 1.417 in(20)
    • 1.496 in(25)
    • 1.5 in(60)
    • 1.575 in(4)
    • 1.625 in(11)
    • 1.655 in(1)
    • 1.732 in(6)
    • 1.75 in(22)
    • 1.772 in(5)
    • 1.875 in(9)
    • 1.891 in(28)
    • 1.969 in(1)
    • 2.0 in(15)
    • 2.008 in(1)
    • 2.125 in(2)
    • 2.165 in(6)
    • 2.205 in(3)
    • 2.244 in(2)
    • 2.25 in(58)
    • 2.362 in(21)
    • 2.375 in(7)
    • 2.441 in(1)
    • 2.5 in(12)
    • 2.52 in(6)
    • 2.75 in(1)
    • 2.835 in(1)
    • 2.874 in(1)
    • 2.953 in(9)
    • 2.992 in(2)
    • 3.0 in(20)
    • 3.125 in(4)
    • 3.15 in(6)
    • 3.25 in(21)
    • 3.375 in(1)
    • 3.858 in(1)
    • 3.938 in(6)
    • 4.0 in(13)
    • 4.016 in(1)
    • 4.25 in(2)
    Reach Min-Reach Max
    Reach
    Reach
    • 6.351 mm(4)
    • 7.95 mm(4)
    • 9.525 mm(9)
    • 11.0 mm(5)
    • 12.0 mm(6)
    • 12.701 mm(22)
    • 13.0 mm(23)
    • 14.0 mm(1)
    • 15.0 mm(4)
    • 15.875 mm(32)
    • 16.0 mm(18)
    • 17.825 mm(1)
    • 18.0 mm(10)
    • 19.0 mm(8)
    • 19.05 mm(44)
    • 20.0 mm(2)
    • 21.0 mm(4)
    • 22.0 mm(15)
    • 22.225 mm(38)
    • 24.0 mm(15)
    • 25.0 mm(2)
    • 25.401 mm(17)
    • 26.0 mm(23)
    • 27.0 mm(6)
    • 28.576 mm(5)
    • 30.0 mm(24)
    • 31.75 mm(92)
    • 32.0 mm(30)
    • 34.926 mm(7)
    • 36.0 mm(20)
    • 38.0 mm(25)
    • 38.1 mm(60)
    • 40.0 mm(4)
    • 41.276 mm(11)
    • 42.0 mm(1)
    • 44.0 mm(6)
    • 44.45 mm(22)
    • 45.0 mm(5)
    • 47.625 mm(9)
    • 48.0 mm(28)
    • 50.0 mm(1)
    • 50.801 mm(15)
    • 51.0 mm(1)
    • 53.975 mm(2)
    • 55.0 mm(6)
    • 56.0 mm(3)
    • 57.0 mm(2)
    • 57.151 mm(58)
    • 60.0 mm(21)
    • 60.325 mm(7)
    • 62.0 mm(1)
    • 63.5 mm(12)
    • 64.0 mm(6)
    • 69.851 mm(1)
    • 72.0 mm(1)
    • 73.0 mm(1)
    • 75.0 mm(9)
    • 76.0 mm(2)
    • 76.2 mm(20)
    • 79.375 mm(4)
    • 80.0 mm(6)
    • 82.551 mm(21)
    • 85.726 mm(1)
    • 98.0 mm(1)
    • 100.0 mm(6)
    • 101.601 mm(13)
    • 102.0 mm(1)
    • 107.95 mm(2)
    Reach Min-Reach Max
    Connection Style
    Connection Style
    • SAFE-LOCK (66)
    • Straight-Cylindrical (777)
    • Weldon (312)
    Number of Flutes
    Number of Flutes
    • 4 (493)
    • 5 (586)
    • 7 (76)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.5 in(9)
    • 2.0 in(46)
    • 2.165 in(15)
    • 2.244 in(36)
    • 2.25 in(15)
    • 2.48 in(40)
    • 2.5 in(111)
    • 2.835 in(32)
    • 2.874 in(3)
    • 2.992 in(43)
    • 3.0 in(112)
    • 3.25 in(9)
    • 3.269 in(61)
    • 3.426 in(1)
    • 3.5 in(53)
    • 3.504 in(1)
    • 3.622 in(34)
    • 3.938 in(35)
    • 4.0 in(173)
    • 4.094 in(24)
    • 4.125 in(12)
    • 4.25 in(1)
    • 4.331 in(2)
    • 4.5 in(30)
    • 4.529 in(20)
    • 4.724 in(3)
    • 4.764 in(6)
    • 4.921 in(14)
    • 5.0 in(74)
    • 5.25 in(13)
    • 5.315 in(9)
    • 5.5 in(18)
    • 5.551 in(9)
    • 5.906 in(9)
    • 6.0 in(51)
    • 6.25 in(3)
    • 6.5 in(2)
    • 6.535 in(3)
    • 6.694 in(5)
    • 6.891 in(2)
    • 7.0 in(13)
    • 7.5 in(1)
    • 8.0 in(2)
    Over All Length [L] Min-Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 38.1 mm(9)
    • 50.801 mm(46)
    • 55.0 mm(15)
    • 57.0 mm(36)
    • 57.151 mm(15)
    • 63.0 mm(40)
    • 63.5 mm(111)
    • 72.0 mm(32)
    • 73.0 mm(3)
    • 76.0 mm(43)
    • 76.2 mm(112)
    • 82.551 mm(9)
    • 83.0 mm(61)
    • 87.0 mm(1)
    • 88.9 mm(53)
    • 89.0 mm(1)
    • 92.0 mm(34)
    • 100.0 mm(35)
    • 101.601 mm(173)
    • 104.0 mm(24)
    • 104.775 mm(12)
    • 107.95 mm(1)
    • 110.0 mm(2)
    • 114.301 mm(30)
    • 115.0 mm(20)
    • 120.0 mm(3)
    • 121.0 mm(6)
    • 125.0 mm(14)
    • 127.0 mm(74)
    • 133.35 mm(13)
    • 135.0 mm(9)
    • 139.701 mm(18)
    • 141.0 mm(9)
    • 150.0 mm(9)
    • 152.4 mm(51)
    • 158.75 mm(3)
    • 165.101 mm(2)
    • 166.0 mm(3)
    • 170.0 mm(5)
    • 175.0 mm(2)
    • 177.8 mm(13)
    • 190.5 mm(1)
    • 203.201 mm(2)
    Over All Length [L] Min-Over All Length [L] Max
    cornerConfiguration
    Corner Style
    Corner Style
    • BALL NOSE (40)
    • CHAMFER (151)
    • RADIUS (725)
    • SQUARE END (239)
    Corner Radius
    Corner Radius
    • 0.0 in(388)
    • 0.008 in(15)
    • 0.01 in(6)
    • 0.012 in(13)
    • 0.015 in(76)
    • 0.016 in(5)
    • 0.02 in(71)
    • 0.03 in(203)
    • 0.039 in(45)
    • 0.06 in(136)
    • 0.063 in(2)
    • 0.079 in(32)
    • 0.09 in(20)
    • 0.094 in(2)
    • 0.098 in(6)
    • 0.119 in(22)
    • 0.12 in(61)
    • 0.125 in(3)
    • 0.156 in(2)
    • 0.157 in(13)
    • 0.187 in(1)
    • 0.188 in(2)
    • 0.197 in(7)
    • 0.219 in(2)
    • 0.237 in(2)
    • 0.25 in(9)
    • 0.313 in(3)
    • 0.315 in(1)
    • 0.375 in(3)
    • 0.394 in(1)
    • 0.5 in(2)
    • 0.625 in(1)
    Corner Radius Min-Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(388)
    • 0.2 mm(15)
    • 0.25 mm(6)
    • 0.301 mm(13)
    • 0.375 mm(76)
    • 0.4 mm(5)
    • 0.5 mm(71)
    • 0.75 mm(203)
    • 1.0 mm(45)
    • 1.5 mm(21)
    • 1.526 mm(115)
    • 1.6 mm(2)
    • 2.0 mm(32)
    • 2.275 mm(20)
    • 2.375 mm(2)
    • 2.5 mm(6)
    • 3.0 mm(22)
    • 3.051 mm(61)
    • 3.176 mm(3)
    • 3.975 mm(2)
    • 4.0 mm(13)
    • 4.75 mm(1)
    • 4.775 mm(2)
    • 5.0 mm(7)
    • 5.551 mm(2)
    • 6.0 mm(2)
    • 6.351 mm(9)
    • 7.95 mm(3)
    • 8.0 mm(1)
    • 9.525 mm(3)
    • 10.0 mm(1)
    • 12.701 mm(2)
    • 15.875 mm(1)
    Corner Radius Min-Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(998)
    • 0.25 mm(8)
    • 0.4 mm(32)
    • 0.5 mm(117)
    Corner Chamfer Min-Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(998)
    • 0.01 in(8)
    • 0.016 in(32)
    • 0.02 in(117)
    Corner Chamfer Min-Corner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • ALTIN-MT (70)
    • TIALN-LT (140)
    • TIALN-LW (104)
    • WP15PE (446)
    • WS15PE (395)
    Rough Finish
    Rough Finish
    • F (918)
    • FR (237)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 3.0 (48)
    • 4.0 (1)
    • 5.0 (7)
    Maximum Ramp Angle Min-Maximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.143 in(3)
    • 0.181 in(2)
    • 0.185 in(2)
    • 0.217 in(5)
    • 0.221 in(2)
    • 0.222 in(8)
    • 0.236 in(9)
    • 0.288 in(1)
    • 0.295 in(8)
    • 0.296 in(12)
    • 0.352 in(16)
    • 0.353 in(3)
    • 0.358 in(1)
    • 0.37 in(24)
    • 0.374 in(5)
    • 0.433 in(1)
    • 0.444 in(22)
    • 0.453 in(8)
    • 0.472 in(24)
    • 0.574 in(1)
    • 0.588 in(11)
    • 0.591 in(6)
    • 0.593 in(24)
    • 0.705 in(23)
    • 0.717 in(1)
    • 0.74 in(21)
    • 0.748 in(6)
    • 0.925 in(9)
    • 0.941 in(11)
    Neck Diameter Min-Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 3.6 mm(3)
    • 4.601 mm(2)
    • 4.7 mm(2)
    • 5.5 mm(5)
    • 5.601 mm(2)
    • 5.65 mm(8)
    • 5.976 mm(9)
    • 7.301 mm(1)
    • 7.5 mm(8)
    • 7.525 mm(12)
    • 8.951 mm(16)
    • 8.975 mm(3)
    • 9.1 mm(1)
    • 9.4 mm(24)
    • 9.5 mm(5)
    • 11.0 mm(1)
    • 11.275 mm(22)
    • 11.5 mm(8)
    • 11.951 mm(24)
    • 14.55 mm(1)
    • 14.925 mm(11)
    • 15.0 mm(6)
    • 15.05 mm(24)
    • 17.901 mm(23)
    • 18.2 mm(1)
    • 18.8 mm(21)
    • 19.0 mm(6)
    • 23.5 mm(9)
    • 23.875 mm(11)
    Neck Diameter Min-Neck Diameter Max
    Center Cutting
    Center Cutting
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 3.176 mm(12)
    • 4.75 mm(3)
    • 4.775 mm(28)
    • 6.0 mm(64)
    • 6.351 mm(66)
    • 7.926 mm(2)
    • 7.95 mm(31)
    • 8.0 mm(49)
    • 9.525 mm(89)
    • 10.0 mm(64)
    • 11.125 mm(10)
    • 12.0 mm(71)
    • 12.701 mm(169)
    • 14.0 mm(9)
    • 15.875 mm(93)
    • 16.0 mm(69)
    • 18.0 mm(3)
    • 19.05 mm(152)
    • 20.0 mm(58)
    • 25.0 mm(20)
    • 25.401 mm(86)
    • 31.75 mm(7)
    Back-End Diameter Min-Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.125 in(12)
    • 0.187 in(3)
    • 0.188 in(28)
    • 0.237 in(64)
    • 0.25 in(66)
    • 0.312 in(2)
    • 0.313 in(31)
    • 0.315 in(49)
    • 0.375 in(89)
    • 0.394 in(64)
    • 0.438 in(10)
    • 0.473 in(71)
    • 0.5 in(169)
    • 0.551 in(9)
    • 0.625 in(93)
    • 0.63 in(69)
    • 0.709 in(3)
    • 0.75 in(152)
    • 0.787 in(58)
    • 0.984 in(20)
    • 1.0 in(86)
    • 1.25 in(7)
    Back-End Diameter Min