VSM17 Serisi

Filtreleri Seçin
Filtreler
    Filtreleri şurada görüntüle
    Metrik
    İnç
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (118)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(99)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(118)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(118)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(118)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(118)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(118)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(118)
    • M Stainless Steel (118)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(118)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(118)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(118)
    • K Cast Iron (94)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(94)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(91)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(91)
    • N Non-Ferrous Materials (90)
      • N1
        Wrought Aluminum (90)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(90)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(87)
    • S High-Temp Alloys (118)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(109)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(109)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(109)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(118)
    • H Hardened Materials (76)
      • H1
        Hardened Materials 44-48 HRC(76)
    Select All Star
    • CN (56)
    • DE (87)
    • GB (4)
    • IN (5)
    • SG (29)
    • US (44)
    Applications
    Applications
    • Face MillingFace Milling (59)
    • PocketPocket (59)
    • Pocket HelicalPocket Helical (59)
    • Pocket MillingPocket Milling (59)
    • Profile MillingProfile Milling (59)
    • RampingRamping (59)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (59)
    • Shoulder MillingShoulder Milling (59)
    • Shoulder RoughingShoulder Roughing (59)
    • Shoulder Square EndShoulder Square End (59)
    • Slot MillingSlot Milling (2)
    • Slot SideSlot Side (2)
    • Slot Square EndSlot Square End (2)
    Cutting Diameter
    Cutting Diameter
    • 0.984 in(4)
    • 1.0 in(4)
    • 1.248 in(6)
    • 1.26 in(6)
    • 1.5 in(9)
    • 1.575 in(8)
    • 1.969 in(3)
    • 2.0 in(5)
    • 2.48 in(2)
    • 2.5 in(2)
    • 3.0 in(2)
    • 3.15 in(2)
    • 3.938 in(1)
    • 4.0 in(1)
    • 4.921 in(1)
    • 5.0 in(1)
    • 6.0 in(1)
    • 6.299 in(1)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 25.0 mm(4)
    • 25.401 mm(4)
    • 31.701 mm(6)
    • 32.0 mm(6)
    • 38.1 mm(9)
    • 40.0 mm(8)
    • 50.0 mm(3)
    • 50.801 mm(5)
    • 63.0 mm(2)
    • 63.5 mm(2)
    • 76.2 mm(2)
    • 80.0 mm(2)
    • 100.0 mm(1)
    • 101.601 mm(1)
    • 125.0 mm(1)
    • 127.0 mm(1)
    • 152.4 mm(1)
    • 160.0 mm(1)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 15.601 mm(1)
    • 15.701 mm(2)
    • 15.8 mm(3)
    • 15.9 mm(4)
    • 16.0 mm(4)
    • 16.1 mm(6)
    • 16.2 mm(17)
    • 16.3 mm(16)
    • 16.401 mm(4)
    • 60.401 mm(1)
    • 104.601 mm(1)
    Cutting Length Min-Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.614 in(1)
    • 0.618 in(2)
    • 0.622 in(3)
    • 0.626 in(4)
    • 0.63 in(4)
    • 0.634 in(6)
    • 0.638 in(17)
    • 0.642 in(16)
    • 0.646 in(4)
    • 2.378 in(1)
    • 4.118 in(1)
    Cutting Length Min-Cutting Length Max
    Reach
    Reach
    • 1.22 in(1)
    • 1.248 in(1)
    • 1.299 in(1)
    • 1.379 in(1)
    • 1.5 in(4)
    • 1.536 in(2)
    • 1.575 in(15)
    • 1.72 in(2)
    • 1.732 in(2)
    • 1.748 in(2)
    • 1.752 in(2)
    • 1.81 in(2)
    • 1.969 in(11)
    • 2.0 in(9)
    • 2.48 in(2)
    • 3.5 in(1)
    • 5.5 in(1)
    Reach Min-Reach Max
    Reach
    Reach
    • 31.0 mm(1)
    • 31.701 mm(1)
    • 33.0 mm(1)
    • 35.0 mm(1)
    • 38.1 mm(4)
    • 39.0 mm(2)
    • 40.0 mm(15)
    • 43.7 mm(2)
    • 44.0 mm(2)
    • 44.401 mm(2)
    • 44.5 mm(2)
    • 45.975 mm(2)
    • 50.0 mm(11)
    • 50.801 mm(9)
    • 63.0 mm(2)
    • 88.9 mm(1)
    • 139.701 mm(1)
    Reach Min-Reach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (59)
    Tool Cutting Edge Angle Min-Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (23)
    • SHCS or RetScrw Or BoltCircle (1)
    • Screw-On Connection (9)
    • Straight-Cylindrical (18)
    • Weldon (8)
    Number of Flutes
    Number of Flutes
    • 12 (2)
    • 2 (12)
    • 3 (15)
    • 4 (14)
    • 5 (4)
    • 6 (6)
    • 7 (2)
    • 8 (2)
    • 9 (2)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (61)
    • 2.0 (134)
    Cutting Edges Per Insert Min-Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(12)
    • 1.752 in(2)
    • 1.969 in(3)
    • 2.0 in(3)
    • 2.114 in(1)
    • 2.244 in(1)
    • 2.465 in(4)
    • 2.48 in(2)
    • 2.539 in(3)
    • 3.5 in(2)
    • 3.543 in(1)
    • 3.938 in(1)
    • 4.0 in(2)
    • 4.331 in(2)
    • 4.5 in(3)
    • 4.724 in(2)
    • 4.799 in(1)
    • 5.118 in(2)
    • 5.202 in(2)
    • 5.5 in(1)
    • 6.694 in(1)
    • 6.702 in(1)
    • 8.0 in(1)
    • 8.268 in(2)
    • 9.799 in(2)
    • 9.843 in(2)
    Over All Length [L] Min-Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(12)
    • 44.5 mm(2)
    • 50.0 mm(3)
    • 50.801 mm(3)
    • 53.7 mm(1)
    • 57.0 mm(1)
    • 62.6 mm(4)
    • 63.0 mm(2)
    • 64.5 mm(3)
    • 88.9 mm(2)
    • 90.0 mm(1)
    • 100.0 mm(1)
    • 101.601 mm(2)
    • 110.0 mm(2)
    • 114.301 mm(3)
    • 120.0 mm(2)
    • 121.9 mm(1)
    • 130.0 mm(2)
    • 132.1 mm(2)
    • 139.701 mm(1)
    • 170.0 mm(1)
    • 170.201 mm(1)
    • 203.201 mm(1)
    • 210.0 mm(2)
    • 248.9 mm(2)
    • 250.0 mm(2)
    Over All Length [L] Min-Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.016 in(64)
    • 0.031 in(78)
    • 0.047 in(75)
    • 0.063 in(67)
    • 0.079 in(66)
    • 0.095 in(65)
    • 0.126 in(66)
    • 0.157 in(65)
    • 0.237 in(62)
    Corner Radius Min-Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(64)
    • 0.8 mm(78)
    • 1.201 mm(75)
    • 1.6 mm(67)
    • 2.0 mm(66)
    • 2.401 mm(65)
    • 3.2 mm(66)
    • 4.0 mm(65)
    • 6.0 mm(62)
    Corner Radius Min-Corner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • WK15CM (64)
    • WK15PM (60)
    • WN10HM (62)
    • WN25PM (68)
    • WP25PM (74)
    • WP35CM (68)
    • WP40PM (72)
    • WS40PM (76)
    • WU20PM (61)
    • WU35PM (62)
    Hand Of Tool
    Hand Of Tool
    • R (59)
    Wiper Insert
    Wiper Insert
    • N (77)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 0.7 (2)
    • 0.9 (2)
    • 1.2 (2)
    • 1.6 (2)
    • 1.7 (2)
    • 2.1 (4)
    • 3.0 (8)
    • 4.0 (8)
    • 4.3 (9)
    • 5.7 (6)
    • 5.8 (6)
    • 8.5 (4)
    • 8.8 (4)
    Maximum Ramp Angle Min-Maximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.828 in(3)
    • 0.843 in(3)
    • 1.093 in(4)
    • 1.102 in(5)
    • 1.343 in(6)
    • 1.417 in(5)
    Neck Diameter Min-Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 21.0 mm(3)
    • 21.401 mm(3)
    • 27.75 mm(4)
    • 28.0 mm(5)
    • 34.1 mm(6)
    • 36.0 mm(5)
    Neck Diameter Min-Neck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • X-PARALLELOGRAM 75 (77)
    Cutting Edge Length
    Cutting Edge Length
    • 15.65 mm(3)
    • 16.3 mm(6)
    • 16.55 mm(7)
    • 16.7 mm(51)
    • 16.725 mm(10)
    Cutting Edge Length Min-Cutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.616 in(3)
    • 0.642 in(6)
    • 0.652 in(7)
    • 0.657 in(51)
    • 0.658 in(10)
    Cutting Edge Length Min-Cutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • ALP (12)
    • MH (8)
    • ML (21)
    • MM (34)
    • MU (2)
    Cutting Tool Material
    Cutting Tool Material
    • H W (77)
    Tolerance Class
    Tolerance Class
    • C (33)
    • E (1)
    • P (43)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (26)
    • SCREW-ON (9)
    • SHELL MILL (24)
    Back-End Diameter
    Back-End Diameter
    • 16.0 mm(1)
    • 19.1 mm(6)
    • 21.0 mm(2)
    • 22.0 mm(5)
    • 25.0 mm(3)
    • 25.401 mm(7)
    • 27.0 mm(2)
    • 29.0 mm(7)
    • 31.701 mm(3)
    • 31.75 mm(1)
    • 32.0 mm(10)
    • 38.1 mm(9)
    • 40.0 mm(3)
    Back-End Diameter Min-Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.63 in(1)
    • 0.752 in(6)
    • 0.828 in(2)
    • 0.866 in(5)
    • 0.984 in(3)
    • 1.0 in(7)
    • 1.063 in(2)
    • 1.143 in(7)
    • 1.248 in(3)
    • 1.25 in(1)
    • 1.26 in(10)
    • 1.5 in(9)
    • 1.575 in(3)
    Back-End Diameter Min-Back-End Diameter Max
    No filters matching ""
    öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
    Select the destination where you want to move -.
    Yeni Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Katalog Numarası

    ANSI Katalog Numarası

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    Pano bilgilerinizi görmek için oturum açmalısınız
    Session expired due to inactivity, please login again
    Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
    ürün(ler) sepete başarıyla eklendi

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Katalog Numarası Kalite  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)