Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

WIDIA Hizmetinizde

Müşteri Destek

Bütün dünyadaki müşteri destek iletişim detaylarını bulun.

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Güçlü takımlama çözümleri indirimde. Şimdi satın alın.

    YENİ - MM Geometri Preslenmiş Uçları

    Çoğu kaba ve yarı hassas işleme frezeleme uygulamaları için genel ve çok yönlü çözümler.

    • Çepeçevre T- Zırhına sahip güçlü kesme kenarı
    • WU20PM, WK15CM, WP35CM kalitelerinde sunulmaktadır
    • Köşe başı daha düşük maliyet sunar

    M1200

    Konik 50 iş mili frezeleme makinelerinde ve tahrikli takımlarda verimliliği artırmak için sınıfının en iyisi yüzey frezeleme platformu.

    • Kenar başına düşük maliyet ve yüksek verimliliğe sahip çözüm.
    • Bir seri tüm yüzey frezeleme ihtiyacını karşılar.
    • Yaklaşma açıları 75°, 45° ve 31°.
    • Hafiften ağır işlemeye kadar yüksek takım ömrü.

    M1200 Mini

    Konik 40 iş mili frezeleme makinelerinde ve tahrikli takımlarda verimliliği artırmak için sınıfının en iyisi yüzey frezeleme platformu.

    • Düşük kesme derinliğine sahip yüzey frezeleme için ilk tercih.
    • Kenar başına düşük maliyet ve yüksek verimlilik.
    • Yumuşak kesme hareketinin sağladığı tekrarlı kesme kuvveti.
    • Önemli ölçüde artırılmış Metal Kaldırma Oranları (MRR).

    M1200 MAKS

    M1200 Maks. Vida Bağlantılı, kenar başına en iyi maliyete sahip bir takımla 7,5 mm'ye kadar yüksek pasoda çalışması gereken müşteriler için 12 kenarlı yüzey frezesidir.

    • Çelik, Paslanmaz Çelik, Gri Dökme Demir ve Nodüler Dökme Demir için Freze
    • WP35CM, WU20PM, WK15CM kalitelerinde üniversal HNMU11 -MM geometri uç.
    • Kapsamlı teklif: 56° yaklaşma açısına ve 7 mm güçlü ve kalın uca sahip kesiciler.
    • 11 mm IC'de ebata göre preslenmiş ve sinterlenmiş (PSTS) uç.
    • Yüksek Paso kapasitesi (7,5 mm Ap1 maks).

     

    Filtreleri Seçin
    Filtreler
    Filtreler
      Filtreleri şurada görüntüle
      Metrik
      İnç
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (233)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(217)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(233)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(233)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(233)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(233)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(233)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(233)
      • M Stainless Steel (233)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(233)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(233)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(233)
      • K Cast Iron (233)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(233)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(230)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(230)
      • N Non-Ferrous Materials (169)
        • N1
          Wrought Aluminum (169)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(169)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(169)
      • S High-Temp Alloys (226)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(204)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(204)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(204)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(226)
      • H Hardened Materials (165)
        • H1
          Hardened Materials 44-48 HRC(165)
      Select All Star
      • CN (68)
      • DE (127)
      • GB (29)
      • IN (35)
      • SG (74)
      • US (79)
      Applications
      Applications
      • Chamfer MillingChamfer Milling (91)
      • Face MillingFace Milling (158)
      Cutting Diameter
      Cutting Diameter
      • 0.984 in(7)
      • 1.0 in(4)
      • 1.25 in(1)
      • 1.26 in(8)
      • 1.5 in(4)
      • 1.575 in(7)
      • 1.969 in(8)
      • 2.0 in(8)
      • 2.48 in(11)
      • 2.5 in(8)
      • 3.0 in(13)
      • 3.15 in(14)
      • 3.938 in(13)
      • 4.0 in(12)
      • 4.921 in(12)
      • 5.0 in(6)
      • 6.0 in(5)
      • 6.299 in(5)
      • 7.875 in(3)
      • 8.0 in(2)
      • 9.843 in(3)
      • 10.0 in(2)
      • 12.0 in(1)
      • 12.403 in(1)
      Cutting Diameter Min-Cutting Diameter Max
      Cutting Diameter
      Cutting Diameter
      • 25.0 mm(7)
      • 25.401 mm(4)
      • 31.75 mm(1)
      • 32.0 mm(8)
      • 38.1 mm(4)
      • 40.0 mm(7)
      • 50.0 mm(8)
      • 50.801 mm(8)
      • 63.0 mm(11)
      • 63.5 mm(8)
      • 76.2 mm(13)
      • 80.0 mm(14)
      • 100.0 mm(13)
      • 101.601 mm(12)
      • 125.0 mm(12)
      • 127.0 mm(6)
      • 152.4 mm(5)
      • 160.0 mm(5)
      • 200.0 mm(3)
      • 203.201 mm(2)
      • 250.0 mm(3)
      • 254.0 mm(2)
      • 304.8 mm(1)
      • 315.0 mm(1)
      Cutting Diameter Min-Cutting Diameter Max
      Maximum Cutting Diameter
      Maximum Cutting Diameter
      • 33.725 mm(6)
      • 34.125 mm(3)
      • 39.125 mm(1)
      • 39.526 mm(1)
      • 40.475 mm(1)
      • 40.725 mm(6)
      • 46.151 mm(2)
      • 46.801 mm(1)
      • 46.825 mm(3)
      • 48.725 mm(2)
      • 50.95 mm(2)
      • 51.0 mm(1)
      • 52.25 mm(1)
      • 54.151 mm(1)
      • 56.75 mm(1)
      • 57.551 mm(1)
      • 58.7 mm(3)
      • 59.5 mm(3)
      • 61.0 mm(2)
      • 61.801 mm(2)
      • 64.15 mm(1)
      • 64.95 mm(1)
      • 67.9 mm(1)
      • 68.7 mm(1)
      • 69.75 mm(1)
      • 71.55 mm(1)
      • 71.7 mm(3)
      • 72.05 mm(1)
      • 72.2 mm(3)
      • 74.0 mm(3)
      • 74.5 mm(2)
      • 74.8 mm(1)
      • 77.125 mm(1)
      • 77.625 mm(1)
      • 80.875 mm(1)
      • 81.375 mm(1)
      • 82.95 mm(1)
      • 84.726 mm(2)
      • 84.9 mm(3)
      • 86.75 mm(2)
      • 87.2 mm(3)
      • 88.0 mm(2)
      • 88.525 mm(2)
      • 88.7 mm(3)
      • 90.325 mm(1)
      • 91.0 mm(3)
      • 91.801 mm(2)
      • 94.075 mm(1)
      • 94.125 mm(1)
      • 97.875 mm(1)
      • 106.75 mm(2)
      • 108.351 mm(1)
      • 108.5 mm(2)
      • 108.7 mm(3)
      • 110.301 mm(3)
      • 110.976 mm(3)
      • 111.801 mm(2)
      • 112.575 mm(5)
      • 113.4 mm(2)
      • 117.851 mm(1)
      • 119.45 mm(1)
      • 131.75 mm(2)
      • 133.5 mm(1)
      • 133.701 mm(3)
      • 133.725 mm(1)
      • 135.701 mm(1)
      • 135.951 mm(2)
      • 135.975 mm(1)
      • 136.75 mm(1)
      • 136.8 mm(1)
      • 137.951 mm(3)
      • 142.875 mm(1)
      • 144.875 mm(1)
      • 163.326 mm(1)
      • 163.375 mm(2)
      • 164.15 mm(1)
      • 164.201 mm(1)
      • 168.5 mm(1)
      • 170.976 mm(2)
      • 171.75 mm(1)
      • 171.8 mm(1)
      • 211.0 mm(1)
      • 211.75 mm(1)
      • 211.8 mm(1)
      • 214.175 mm(1)
      • 214.201 mm(1)
      • 261.0 mm(1)
      • 261.75 mm(1)
      • 261.8 mm(1)
      • 264.651 mm(1)
      • 265.0 mm(1)
      • 315.8 mm(1)
      • 326.0 mm(1)
      Maximum Cutting Diameter Min-Maximum Cutting Diameter Max
      Maximum Cutting Diameter
      Maximum Cutting Diameter
      • 1.328 in(6)
      • 1.344 in(3)
      • 1.54 in(1)
      • 1.556 in(1)
      • 1.594 in(1)
      • 1.603 in(6)
      • 1.817 in(2)
      • 1.843 in(1)
      • 1.844 in(3)
      • 1.919 in(2)
      • 2.007 in(2)
      • 2.008 in(1)
      • 2.057 in(1)
      • 2.132 in(1)
      • 2.234 in(1)
      • 2.266 in(1)
      • 2.311 in(3)
      • 2.343 in(3)
      • 2.402 in(2)
      • 2.433 in(2)
      • 2.527 in(1)
      • 2.557 in(1)
      • 2.673 in(1)
      • 2.705 in(1)
      • 2.746 in(1)
      • 2.817 in(1)
      • 2.823 in(3)
      • 2.837 in(1)
      • 2.843 in(3)
      • 2.914 in(3)
      • 2.934 in(2)
      • 2.945 in(1)
      • 3.036 in(1)
      • 3.056 in(1)
      • 3.184 in(1)
      • 3.204 in(1)
      • 3.266 in(1)
      • 3.336 in(2)
      • 3.343 in(3)
      • 3.415 in(2)
      • 3.434 in(3)
      • 3.465 in(2)
      • 3.485 in(2)
      • 3.492 in(3)
      • 3.556 in(1)
      • 3.583 in(3)
      • 3.614 in(2)
      • 3.704 in(1)
      • 3.706 in(1)
      • 3.853 in(1)
      • 4.203 in(2)
      • 4.266 in(1)
      • 4.272 in(2)
      • 4.28 in(3)
      • 4.343 in(3)
      • 4.369 in(3)
      • 4.402 in(2)
      • 4.432 in(5)
      • 4.465 in(2)
      • 4.64 in(1)
      • 4.703 in(1)
      • 5.187 in(2)
      • 5.256 in(1)
      • 5.264 in(3)
      • 5.265 in(1)
      • 5.343 in(1)
      • 5.352 in(2)
      • 5.353 in(1)
      • 5.384 in(1)
      • 5.386 in(1)
      • 5.431 in(3)
      • 5.625 in(1)
      • 5.704 in(1)
      • 6.43 in(1)
      • 6.432 in(2)
      • 6.463 in(1)
      • 6.465 in(1)
      • 6.634 in(1)
      • 6.731 in(2)
      • 6.763 in(1)
      • 6.764 in(1)
      • 8.307 in(1)
      • 8.337 in(1)
      • 8.339 in(1)
      • 8.432 in(1)
      • 8.433 in(1)
      • 10.276 in(1)
      • 10.305 in(1)
      • 10.307 in(1)
      • 10.419 in(1)
      • 10.433 in(1)
      • 12.433 in(1)
      • 12.835 in(1)
      Maximum Cutting Diameter Min-Maximum Cutting Diameter Max
      Cutting Length
      Cutting Length
      • 1.701 mm(12)
      • 2.2 mm(10)
      • 3.5 mm(49)
      • 4.4 mm(2)
      • 4.45 mm(1)
      • 4.5 mm(41)
      • 4.601 mm(1)
      • 4.7 mm(13)
      • 6.0 mm(10)
      • 7.5 mm(19)
      Cutting Length Min-Cutting Length Max
      Cutting Length
      Cutting Length
      • 0.067 in(12)
      • 0.088 in(10)
      • 0.138 in(49)
      • 0.174 in(2)
      • 0.176 in(1)
      • 0.177 in(41)
      • 0.181 in(1)
      • 0.185 in(13)
      • 0.237 in(10)
      • 0.295 in(19)
      Cutting Length Min-Cutting Length Max
      Reach
      Reach
      • 1.25 in(4)
      • 1.26 in(7)
      • 1.5 in(2)
      • 1.57 in(4)
      • 1.575 in(48)
      • 1.75 in(23)
      • 1.969 in(28)
      • 2.0 in(2)
      • 2.38 in(15)
      • 2.48 in(23)
      • 3.15 in(2)
      Reach Min-Reach Max
      Reach
      Reach
      • 31.75 mm(4)
      • 32.0 mm(7)
      • 38.1 mm(2)
      • 39.875 mm(4)
      • 40.0 mm(48)
      • 44.45 mm(23)
      • 50.0 mm(28)
      • 50.801 mm(2)
      • 60.45 mm(15)
      • 63.0 mm(23)
      • 80.0 mm(2)
      Reach Min-Reach Max
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 15.0 (22)
      • 45.0 (94)
      • 56.0 (19)
      • 58.0 (23)
      Tool Cutting Edge Angle Min-Tool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • A-Socket Head Cap Screw (88)
      • B-Cutter Retention Screw (28)
      • C-Bolt Circle (14)
      • KL Screw (3)
      • SHCS or RetScrw Or BoltCircle (3)
      • Screw-On Connection (6)
      • Straight-Cylindrical (9)
      • Weldon (7)
      Number of Flutes
      Number of Flutes
      • 10 (9)
      • 11 (2)
      • 12 (8)
      • 14 (5)
      • 16 (5)
      • 18 (2)
      • 2 (4)
      • 20 (2)
      • 22 (1)
      • 24 (1)
      • 28 (1)
      • 3 (12)
      • 4 (19)
      • 5 (25)
      • 6 (24)
      • 7 (4)
      • 8 (24)
      • 9 (10)
      Cutting Edges Per Insert
      Cutting Edges Per Insert
      • 3.0 (57)
      • 6.0 (53)
      • 12.0 (252)
      Cutting Edges Per Insert Min-Cutting Edges Per Insert Max
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 1.57 in(4)
      • 1.575 in(40)
      • 1.75 in(23)
      • 1.969 in(27)
      • 2.0 in(2)
      • 2.158 in(1)
      • 2.165 in(1)
      • 2.224 in(1)
      • 2.38 in(15)
      • 2.406 in(1)
      • 2.48 in(25)
      • 3.15 in(2)
      • 3.228 in(1)
      • 3.281 in(2)
      • 3.785 in(1)
      • 3.819 in(2)
      • 4.213 in(1)
      • 4.724 in(2)
      • 4.8 in(1)
      • 5.118 in(4)
      • 7.875 in(2)
      Over All Length [L] Min-Over All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 39.875 mm(4)
      • 40.0 mm(40)
      • 44.45 mm(23)
      • 50.0 mm(27)
      • 50.801 mm(2)
      • 54.801 mm(1)
      • 55.0 mm(1)
      • 56.5 mm(1)
      • 60.45 mm(15)
      • 61.1 mm(1)
      • 63.0 mm(25)
      • 80.0 mm(2)
      • 82.0 mm(1)
      • 83.301 mm(2)
      • 96.101 mm(1)
      • 97.0 mm(2)
      • 107.0 mm(1)
      • 120.0 mm(2)
      • 121.926 mm(1)
      • 130.0 mm(4)
      • 200.0 mm(2)
      Over All Length [L] Min-Over All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.039 in(24)
      • 0.047 in(213)
      • 0.052 in(57)
      • 0.063 in(53)
      • 0.126 in(79)
      • 0.171 in(75)
      Corner Radius Min-Corner Radius Max
      Corner Radius
      Corner Radius
      • 1.0 mm(24)
      • 1.201 mm(213)
      • 1.3 mm(57)
      • 1.6 mm(53)
      • 3.2 mm(79)
      • 4.351 mm(75)
      Corner Radius Min-Corner Radius Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 mm(256)
      • 1.201 mm(12)
      Corner Chamfer Min-Corner Chamfer Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 in(256)
      • 0.047 in(12)
      Corner Chamfer Min-Corner Chamfer Max
      application
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • THM-U (122)
      • TN5515 (139)
      • TN6501 (121)
      • TN6505 (74)
      • TN6510 (122)
      • TN6520 (152)
      • TN6525 (146)
      • TN6540 (152)
      • TN7535 (139)
      • WK15CM (169)
      • WK20PM (65)
      • WK25YM (66)
      • WP25PM (150)
      • WP35CM (171)
      • WP40PM (151)
      • WS30PM (143)
      • WS40PM (153)
      • WU20PM (12)
      Hand Of Tool
      Hand Of Tool
      • R (158)
      Wiper Insert
      Wiper Insert
      • N (86)
      • Y (24)
      frontEnd
      Neck Diameter
      Neck Diameter
      • 0.76 in(4)
      • 0.958 in(4)
      • 1.006 in(3)
      • 1.059 in(1)
      • 1.256 in(4)
      Neck Diameter Min-Neck Diameter Max
      Neck Diameter
      Neck Diameter
      • 19.3 mm(4)
      • 24.3 mm(4)
      • 25.55 mm(3)
      • 26.901 mm(1)
      • 31.901 mm(4)
      Neck Diameter Min-Neck Diameter Max
      Center Cutting
      Center Cutting
      insertGeometry
      Shape
      Shape
      • H-HEXAGON 120 (110)
      Insert IC Size
      Insert IC Size
      • 12.701 mm(43)
      • 15.875 mm(62)
      • 19.05 mm(5)
      Insert IC Size Min-Insert IC Size Max
      Insert IC Size
      Insert IC Size
      • 0.5 in(43)
      • 0.625 in(62)
      • 0.75 in(5)
      Insert IC Size Min-Insert IC Size Max
      Cutting Edge Length
      Cutting Edge Length
      • 6.0 mm(1)
      • 6.775 mm(8)
      • 6.801 mm(16)
      • 6.825 mm(18)
      • 8.5 mm(10)
      • 8.576 mm(17)
      • 8.6 mm(26)
      • 9.175 mm(1)
      • 9.576 mm(8)
      • 10.75 mm(5)
      Cutting Edge Length Min-Cutting Edge Length Max
      Cutting Edge Length
      Cutting Edge Length
      • 0.237 in(1)
      • 0.267 in(8)
      • 0.268 in(16)
      • 0.269 in(18)
      • 0.335 in(10)
      • 0.338 in(17)
      • 0.339 in(26)
      • 0.361 in(1)
      • 0.377 in(8)
      • 0.423 in(5)
      Cutting Edge Length Min-Cutting Edge Length Max
      Chip Breaker CBMD
      Chip Breaker CBMD
      • GD (33)
      • HD (35)
      • LD (30)
      • MM (11)
      Cutting Tool Material
      Cutting Tool Material
      • C N (1)
      • H W (109)
      Tolerance Class
      Tolerance Class
      • D (8)
      • E (1)
      • G (50)
      • M (5)
      • P (46)
      backEnd
      Connection Type
      Connection Type
      • CYLINDRICAL (16)
      • SCREW-ON (6)
      • SHELL MILL (136)
      Back-End Diameter
      Back-End Diameter
      • 12.701 mm(2)
      • 19.05 mm(17)
      • 19.075 mm(1)
      • 19.1 mm(2)
      • 20.0 mm(3)
      • 22.0 mm(25)
      • 25.0 mm(9)
      • 25.401 mm(14)
      • 27.0 mm(14)
      • 29.0 mm(6)
      • 31.75 mm(2)
      • 32.0 mm(13)
      • 38.1 mm(16)
      • 40.0 mm(17)
      • 50.801 mm(5)
      • 60.0 mm(7)
      • 63.5 mm(5)
      Back-End Diameter Min-Back-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.5 in(2)
      • 0.75 in(17)
      • 0.751 in(1)
      • 0.752 in(2)
      • 0.787 in(3)
      • 0.866 in(25)
      • 0.984 in(9)
      • 1.0 in(14)
      • 1.063 in(14)
      • 1.143 in(6)
      • 1.25 in(2)
      • 1.26 in(13)
      • 1.5 in(16)
      • 1.575 in(17)
      • 2.0 in(5)
      • 2.362 in(7)
      • 2.5 in(5)
      Back-End Diameter Min-Back-End Diameter Max
      No filters matching ""
      M1200 MAKS
      (24)

      M1200 MAKS

      M1200 Mini
      (117)

      M1200 Mini

      M1200 Standart
      (127)

      M1200 Standart

      Where To Buy

      Find an authorized WIDIA distributor near you.

      Search Near Me
      öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
      Select the destination where you want to move -.
      Yeni Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      Lütfen geçerli bir ad girin
      product-image
      Please adjust the following properties from

      ISO Katalog Numarası

      ANSI Katalog Numarası

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

       

      Can’t find the file type you’re looking for?

      Pano bilgilerinizi görmek için oturum açmalısınız
      Session expired due to inactivity, please login again
      Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
      ürün(ler) sepete başarıyla eklendi
      Sepeti Görüntüle

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material NumberISO Katalog NumarasıKalite  

      You are about to leave the Solution building process.

      Are you sure you want to leave?