Increased Productivity enabled by the strength of Duo-Lock by Haimer and WIDIA connection systems.

VariMill modular combines the highest runout accuracy and length repeatability with maximum coupling stability. 

The flexible VariMill modular system targets applications like those of solid carbide end mills. A wide range of diameters between 10-32mm and multiple corner configurations such as sharp chamfer and radii are available from stock.

 

Features and Benefits:

  • Less cutting forces and pressure on cutting edge through tailored axial and radial rake angles
  • Proprietary tapered core provides highest tool stability in roughing and finishing applications
  • Eccentric relief design increases tool life through higher edge stability

Advances Inch (2018)

Featuring our Advances 2018 products.

Download PDF or

View Digital Catalog

Advances Metric (2018)

Featuring our Advances 2018 products.

Download PDF or

View Digital Catalog
Filtreleri Seçin
Filtreler
    Filtreleri şurada görüntüle
    Metrik
    İnç
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (15)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(11)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(11)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(11)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(12)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(14)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(15)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(13)
    • M Stainless Steel (14)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(14)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(14)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(14)
    • K Cast Iron (12)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(12)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(12)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(12)
    • N Non-Ferrous Materials (5)
      • N1
        Wrought Aluminum (5)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(5)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(5)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (5)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (5)
      • N6
        Carbon, Graphite Composites, CFRP (4)
      • N7
        MMC's (4)
    • S High-Temp Alloys (15)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(15)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(15)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(15)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(15)
    • H Hardened Materials (15)
      • H1
        Hardened Materials 44-48 HRC(15)
      • H2
        Hardened Materials 48-55 HRC(10)
      • H3
        Hardened Materials 56-60 HRC(1)
    Select All Star
    • DE (17)
    • GB (5)
    • US (17)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (4)
    • Concave Radius MillingConcave Radius Milling (3)
    • Face MillingFace Milling (17)
    • PocketPocket (33)
    • Pocket HelicalPocket Helical (24)
    • Pocket MillingPocket Milling (33)
    • Pocket Plunge MillingPocket Plunge Milling (8)
    • Profile MillingProfile Milling (4)
    • RampingRamping (24)
    • Shoulder Ball NoseShoulder Ball Nose (4)
    • Shoulder MillingShoulder Milling (33)
    • Shoulder RoughingShoulder Roughing (19)
    • Shoulder Square EndShoulder Square End (29)
    • Slot Ball NoseSlot Ball Nose (6)
    • Slot MillingSlot Milling (21)
    • Slot Square EndSlot Square End (17)
    Cutting Diameter
    Cutting Diameter
    • 0.02 in(4)
    • 0.237 in(1)
    • 0.255 in(1)
    • 0.276 in(1)
    • 0.375 in(1)
    • 0.394 in(2)
    • 0.473 in(3)
    • 0.5 in(3)
    • 0.625 in(2)
    • 0.63 in(4)
    • 0.75 in(8)
    • 0.787 in(4)
    • 1.0 in(3)
    • 1.25 in(1)
    • 1.26 in(2)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 0.5 mm(4)
    • 6.0 mm(1)
    • 6.476 mm(1)
    • 7.0 mm(1)
    • 9.525 mm(1)
    • 10.0 mm(2)
    • 12.0 mm(3)
    • 12.701 mm(3)
    • 15.875 mm(2)
    • 16.0 mm(4)
    • 19.05 mm(8)
    • 20.0 mm(4)
    • 25.401 mm(3)
    • 31.75 mm(1)
    • 32.0 mm(2)
    Cutting Diameter Min-Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 9.525 mm(1)
    • 10.0 mm(2)
    • 12.0 mm(1)
    • 12.701 mm(1)
    • 15.875 mm(1)
    • 16.0 mm(1)
    Maximum Cutting Diameter Min-Maximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.375 in(1)
    • 0.394 in(2)
    • 0.473 in(1)
    • 0.5 in(1)
    • 0.625 in(1)
    • 0.63 in(1)
    Maximum Cutting Diameter Min-Maximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 1.5 mm(1)
    • 1.526 mm(1)
    • 2.0 mm(1)
    • 2.551 mm(1)
    • 3.0 mm(1)
    • 3.176 mm(1)
    • 4.0 mm(1)
    • 14.3 mm(1)
    • 15.0 mm(2)
    • 18.0 mm(3)
    • 19.05 mm(3)
    • 23.8 mm(2)
    • 24.0 mm(4)
    • 28.576 mm(8)
    • 30.0 mm(4)
    • 38.1 mm(3)
    • 47.625 mm(1)
    • 48.0 mm(2)
    Cutting Length Min-Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.06 in(2)
    • 0.079 in(1)
    • 0.1 in(1)
    • 0.119 in(1)
    • 0.125 in(1)
    • 0.157 in(1)
    • 0.564 in(1)
    • 0.591 in(2)
    • 0.709 in(3)
    • 0.75 in(3)
    • 0.937 in(2)
    • 0.946 in(4)
    • 1.125 in(8)
    • 1.181 in(4)
    • 1.5 in(3)
    • 1.875 in(1)
    • 1.891 in(2)
    Cutting Length Min-Cutting Length Max
    Reach
    Reach
    • 0.843 in(1)
    • 0.847 in(1)
    • 0.886 in(2)
    • 0.89 in(1)
    • 0.894 in(1)
    • 1.063 in(3)
    • 1.071 in(1)
    • 1.127 in(3)
    • 1.131 in(1)
    • 1.403 in(1)
    • 1.407 in(2)
    • 1.417 in(4)
    • 1.427 in(1)
    • 1.689 in(8)
    • 1.772 in(4)
    • 2.253 in(3)
    • 2.803 in(1)
    • 2.823 in(2)
    Reach Min-Reach Max
    Reach
    Reach
    • 21.401 mm(1)
    • 21.526 mm(1)
    • 22.5 mm(2)
    • 22.6 mm(1)
    • 22.701 mm(1)
    • 27.0 mm(3)
    • 27.201 mm(1)
    • 28.6 mm(3)
    • 28.701 mm(1)
    • 35.6 mm(1)
    • 35.7 mm(2)
    • 36.0 mm(4)
    • 36.25 mm(1)
    • 42.901 mm(8)
    • 45.0 mm(4)
    • 57.2 mm(3)
    • 71.2 mm(1)
    • 71.7 mm(2)
    Reach Min-Reach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (4)
    • 90.0 (36)
    Tool Cutting Edge Angle Min-Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • DUO-LOCK (40)
    Number of Flutes
    Number of Flutes
    • 10 (2)
    • 3 (2)
    • 4 (15)
    • 5 (8)
    • 6 (6)
    • 7 (5)
    • 8 (2)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.335 in(2)
    • 1.379 in(3)
    • 1.383 in(1)
    • 1.655 in(3)
    • 1.661 in(1)
    • 1.717 in(2)
    • 1.72 in(1)
    • 1.736 in(1)
    • 2.189 in(1)
    • 2.193 in(2)
    • 2.205 in(4)
    • 2.215 in(1)
    • 2.63 in(8)
    • 2.713 in(4)
    • 3.488 in(3)
    • 4.398 in(1)
    • 4.417 in(2)
    Over All Length [L] Min-Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 33.9 mm(2)
    • 35.0 mm(3)
    • 35.1 mm(1)
    • 42.0 mm(3)
    • 42.2 mm(1)
    • 43.6 mm(2)
    • 43.7 mm(1)
    • 44.1 mm(1)
    • 55.6 mm(1)
    • 55.7 mm(2)
    • 56.0 mm(4)
    • 56.25 mm(1)
    • 66.8 mm(8)
    • 68.9 mm(4)
    • 88.601 mm(3)
    • 111.7 mm(1)
    • 112.2 mm(2)
    Over All Length [L] Min-Over All Length [L] Max
    cornerConfiguration
    Corner Style
    Corner Style
    • BALL NOSE (4)
    • CHAMFER (9)
    • RADIUS (24)
    • SQUARE END (3)
    Corner Radius
    Corner Radius
    • 0.0 in(11)
    • 0.015 in(1)
    • 0.02 in(2)
    • 0.03 in(7)
    • 0.039 in(1)
    • 0.06 in(4)
    • 0.09 in(2)
    • 0.119 in(2)
    • 0.12 in(4)
    • 0.157 in(1)
    • 0.25 in(2)
    • 0.315 in(1)
    • 0.394 in(1)
    • 0.5 in(1)
    Corner Radius Min-Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(11)
    • 0.375 mm(1)
    • 0.5 mm(2)
    • 0.75 mm(7)
    • 1.0 mm(1)
    • 1.5 mm(1)
    • 1.526 mm(3)
    • 2.275 mm(2)
    • 3.0 mm(2)
    • 3.051 mm(4)
    • 4.0 mm(1)
    • 6.351 mm(2)
    • 8.0 mm(1)
    • 10.0 mm(1)
    • 12.701 mm(1)
    Corner Radius Min-Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(31)
    • 0.5 mm(5)
    • 2.0 mm(1)
    • 2.551 mm(1)
    • 3.176 mm(1)
    • 4.0 mm(1)
    Corner Chamfer Min-Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(31)
    • 0.02 in(5)
    • 0.079 in(1)
    • 0.1 in(1)
    • 0.125 in(1)
    • 0.157 in(1)
    Corner Chamfer Min-Corner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • UNCOATED (2)
    • WP15PE (21)
    • WS15PE (17)
    Hand Of Tool
    Hand Of Tool
    • R (40)
    Rough Finish
    Rough Finish
    • F (35)
    • R (5)
    frontEnd
    Front End Type
    Front End Type
    • DLK - DUO-LOCK Modular Connect (83)
    Front End Style
    Front End Style
    • DLK01 DUO-LOCK (83)
    Gage Length
    Gage Length
    • 10 in(5)
    • 5 in(2)
    • 3 in(1)
    • 4 in(1)
    • 2.165 in(1)
    • 2.25 in(1)
    • 2.5 in(2)
    • 2.559 in(2)
    • 2.75 in(1)
    • 2.757 in(1)
    • 3.15 in(3)
    • 3.25 in(2)
    • 3.5 in(2)
    • 3.543 in(2)
    • 3.74 in(1)
    • 3.75 in(2)
    • 3.938 in(1)
    • 4.134 in(3)
    • 4.25 in(2)
    • 4.5 in(2)
    • 4.529 in(2)
    • 4.724 in(2)
    • 5.5 in(1)
    • 5.513 in(1)
    • 6.25 in(3)
    • 6.299 in(3)
    • 7.5 in(5)
    • 7.875 in(5)
    • 9.843 in(6)
    Gage Length
    Gage Length
    • 250 mm(6)
    • 200 mm(5)
    • 254 mm(5)
    • 105 mm(3)
    • 160 mm(3)
    • 80 mm(3)
    • 115 mm(2)
    • 120 mm(2)
    • 127 mm(2)
    • 65 mm(2)
    • 90 mm(2)
    • 100 mm(1)
    • 140 mm(1)
    • 55 mm(1)
    • 70 mm(1)
    • 95 mm(1)
    • 57.151 mm(1)
    • 63.5 mm(2)
    • 69.851 mm(1)
    • 76.2 mm(1)
    • 82.551 mm(2)
    • 88.9 mm(2)
    • 95.25 mm(2)
    • 101.601 mm(1)
    • 107.95 mm(2)
    • 114.301 mm(2)
    • 139.701 mm(1)
    • 158.75 mm(3)
    • 190.5 mm(5)
    Center Cutting
    Center Cutting
    backEnd
    Connection Type
    Connection Type
    • DUO-LOCK (40)
    Back-End Diameter
    Back-End Diameter
    • 9.525 mm(4)
    • 9.601 mm(2)
    • 10.0 mm(6)
    • 12.0 mm(10)
    • 12.201 mm(4)
    • 12.701 mm(6)
    • 15.875 mm(9)
    • 16.0 mm(13)
    • 19.05 mm(12)
    • 19.3 mm(4)
    • 20.0 mm(10)
    • 24.401 mm(3)
    • 25.0 mm(6)
    • 25.401 mm(16)
    • 31.0 mm(2)
    • 31.75 mm(7)
    • 32.0 mm(4)
    • 38.1 mm(1)
    • 40.0 mm(2)
    • 50.0 mm(1)
    • 50.801 mm(1)
    Back-End Diameter Min-Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.375 in(4)
    • 0.378 in(2)
    • 0.394 in(6)
    • 0.473 in(10)
    • 0.48 in(4)
    • 0.5 in(6)
    • 0.625 in(9)
    • 0.63 in(13)
    • 0.75 in(12)
    • 0.76 in(4)
    • 0.787 in(10)
    • 0.961 in(3)
    • 0.984 in(6)
    • 1.0 in(16)
    • 1.22 in(2)
    • 1.25 in(7)
    • 1.26 in(4)
    • 1.5 in(1)
    • 1.575 in(2)
    • 1.969 in(1)
    • 2.0 in(1)
    Back-End Diameter Min-Back-End Diameter Max
    No filters matching ""
    öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
    Select the destination where you want to move -.
    Yeni Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Katalog Numarası

    ANSI Katalog Numarası

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Pano bilgilerinizi görmek için oturum açmalısınız
    Session expired due to inactivity, please login again
    Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
    ürün(ler) sepete başarıyla eklendi

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Katalog NumarasıKalite  

    You are about to leave the Solution building process.

    Are you sure you want to leave?