M680 Serisi

Filtreleri Seçin
Filtreler
    Filtreleri şurada görüntüle
    Metrik
    İnç
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (81)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(74)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(81)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(81)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(81)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(81)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(78)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(78)
    • M Stainless Steel (86)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(86)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(86)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(86)
    • K Cast Iron (107)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(107)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(104)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(104)
    • N Non-Ferrous Materials (55)
      • N1
        Wrought Aluminum (55)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(55)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(55)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (25)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (25)
      • N6
        Carbon, Graphite Composites, CFRP (25)
      • N7
        MMC's (25)
    • S High-Temp Alloys (79)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(64)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(64)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(64)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(79)
    • H Hardened Materials (35)
      • H1
        Hardened Materials 44-48 HRC(35)
    Select All Star
    • CN (31)
    • DE (56)
    • GB (8)
    • IN (29)
    • SG (10)
    Applications
    Applications
    • Face MillingFace Milling (31)
    • PocketPocket (8)
    • Pocket MillingPocket Milling (8)
    • Pocket Plunge MillingPocket Plunge Milling (8)
    • RampingRamping (8)
    • Shoulder MillingShoulder Milling (31)
    • Shoulder RoughingShoulder Roughing (8)
    • Shoulder Square EndShoulder Square End (21)
    • Slot MillingSlot Milling (31)
    • Slot SideSlot Side (8)
    • Slot Square EndSlot Square End (29)
    Cutting Diameter
    Cutting Diameter
    • 0.625 in(1)
    • 0.63 in(2)
    • 0.75 in(1)
    • 0.787 in(2)
    • 0.984 in(4)
    • 1.0 in(2)
    • 1.25 in(1)
    • 1.26 in(5)
    • 1.379 in(1)
    • 1.575 in(4)
    • 1.969 in(2)
    • 2.0 in(1)
    • 2.48 in(1)
    • 3.15 in(1)
    • 3.938 in(1)
    • 4.921 in(1)
    • 6.299 in(1)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 15.875 mm(1)
    • 16.0 mm(2)
    • 19.05 mm(1)
    • 20.0 mm(2)
    • 25.0 mm(4)
    • 25.401 mm(2)
    • 31.75 mm(1)
    • 32.0 mm(5)
    • 35.0 mm(1)
    • 40.0 mm(4)
    • 50.0 mm(2)
    • 50.801 mm(1)
    • 63.0 mm(1)
    • 80.0 mm(1)
    • 100.0 mm(1)
    • 125.0 mm(1)
    • 160.0 mm(1)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 9.0 mm(10)
    • 9.5 mm(4)
    • 13.976 mm(3)
    • 14.0 mm(12)
    • 15.3 mm(1)
    • 15.351 mm(1)
    Cutting Length Min-Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.354 in(10)
    • 0.374 in(4)
    • 0.55 in(3)
    • 0.551 in(12)
    • 0.602 in(1)
    • 0.604 in(1)
    Cutting Length Min-Cutting Length Max
    Reach
    Reach
    • 1.063 in(1)
    • 1.071 in(1)
    • 1.181 in(2)
    • 1.186 in(1)
    • 1.26 in(1)
    • 1.286 in(1)
    • 1.5 in(1)
    • 1.536 in(2)
    • 1.566 in(1)
    • 1.567 in(1)
    • 1.575 in(10)
    • 1.72 in(1)
    • 1.772 in(1)
    • 1.969 in(3)
    • 2.025 in(1)
    • 2.45 in(1)
    • 2.48 in(2)
    Reach Min-Reach Max
    Reach
    Reach
    • 27.0 mm(1)
    • 27.201 mm(1)
    • 30.0 mm(2)
    • 30.125 mm(1)
    • 32.0 mm(1)
    • 32.676 mm(1)
    • 38.1 mm(1)
    • 39.0 mm(2)
    • 39.776 mm(1)
    • 39.801 mm(1)
    • 40.0 mm(10)
    • 43.7 mm(1)
    • 45.0 mm(1)
    • 50.0 mm(3)
    • 51.426 mm(1)
    • 62.225 mm(1)
    • 63.0 mm(2)
    Reach Min-Reach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (23)
    • 90.25 (2)
    • 90.28 (2)
    • 90.4 (4)
    Tool Cutting Edge Angle Min-Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (6)
    • B-Cutter Retention Screw (3)
    • SHCS or RetScrw Or BoltCircle (1)
    • Screw-On Connection (6)
    • Straight-Cylindrical (8)
    • Weldon (7)
    Number of Flutes
    Number of Flutes
    • 12 (1)
    • 2 (9)
    • 3 (6)
    • 4 (6)
    • 5 (5)
    • 6 (2)
    • 8 (1)
    • 9 (1)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.5 in(1)
    • 1.575 in(4)
    • 1.772 in(1)
    • 1.969 in(2)
    • 2.047 in(2)
    • 2.48 in(6)
    • 2.953 in(1)
    • 3.228 in(1)
    • 3.781 in(1)
    • 3.938 in(2)
    • 4.0 in(1)
    • 4.331 in(1)
    • 6.0 in(1)
    • 7.087 in(1)
    • 7.875 in(1)
    • 8.0 in(2)
    • 8.661 in(1)
    • 9.8 in(1)
    • 9.843 in(1)
    Over All Length [L] Min-Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 38.1 mm(1)
    • 40.0 mm(4)
    • 45.0 mm(1)
    • 50.0 mm(2)
    • 52.0 mm(2)
    • 63.0 mm(6)
    • 75.0 mm(1)
    • 82.0 mm(1)
    • 96.0 mm(1)
    • 100.0 mm(2)
    • 101.601 mm(1)
    • 110.0 mm(1)
    • 152.4 mm(1)
    • 180.0 mm(1)
    • 200.0 mm(1)
    • 203.201 mm(2)
    • 220.0 mm(1)
    • 248.925 mm(1)
    • 250.0 mm(1)
    Over All Length [L] Min-Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.016 in(30)
    • 0.031 in(65)
    • 0.047 in(57)
    • 0.063 in(33)
    • 0.066 in(17)
    • 0.079 in(32)
    • 0.098 in(21)
    • 0.125 in(20)
    • 0.157 in(21)
    Corner Radius Min-Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(30)
    • 0.8 mm(65)
    • 1.201 mm(57)
    • 1.6 mm(33)
    • 1.675 mm(17)
    • 2.0 mm(32)
    • 2.5 mm(21)
    • 3.176 mm(20)
    • 4.0 mm(21)
    Corner Radius Min-Corner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM (42)
    • THM-U (20)
    • THR (28)
    • TN2510 (27)
    • TN25M (27)
    • TN450 (31)
    • TN5515 (31)
    • TN6501 (22)
    • TN6502 (22)
    • TN6510 (24)
    • TN6520 (25)
    • TN6525 (26)
    • TN6540 (30)
    • TN7525 (31)
    • TN7535 (31)
    • TTI25 (34)
    • TTM (4)
    • TTM08 (30)
    • TTR (17)
    • WK15CM (45)
    • WK15PM (11)
    • WP35CM (46)
    • WP40PM (24)
    • WS30PM (18)
    • WU20PM (34)
    Hand Of Tool
    Hand Of Tool
    • R (31)
    Rough Finish
    Rough Finish
    • FR (5)
    Wiper Insert
    Wiper Insert
    • N (89)
    frontEnd
    Insert Shape
    Insert Shape
    • A-PARALLELOGRAM 85 (13)
    • X-PARALLELOGRAM 80 (102)
    • X-RECTANGLE MILL 4 90 (18)
    • X-RH0MBIC 70 (14)
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • A-PARALLELOGRAM 85 (9)
    • X-PARALLELOGRAM 80 (75)
    • X-RECTANGLE MILL 4 90 (1)
    • X-RH0MBIC 70 (4)
    Insert IC Size
    Insert IC Size
    • 9.525 mm(5)
    Insert IC Size Min-Insert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.375 in(5)
    Insert IC Size Min-Insert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 8.875 mm(1)
    • 8.951 mm(1)
    • 9.0 mm(1)
    • 9.175 mm(1)
    • 9.451 mm(1)
    • 9.475 mm(5)
    • 9.875 mm(2)
    • 10.375 mm(4)
    • 10.451 mm(5)
    • 15.675 mm(58)
    • 15.775 mm(3)
    • 15.875 mm(5)
    Cutting Edge Length Min-Cutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.35 in(1)
    • 0.352 in(1)
    • 0.354 in(1)
    • 0.361 in(1)
    • 0.372 in(1)
    • 0.373 in(5)
    • 0.389 in(2)
    • 0.409 in(4)
    • 0.412 in(5)
    • 0.617 in(58)
    • 0.621 in(3)
    • 0.625 in(5)
    Cutting Edge Length Min-Cutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • AL (9)
    • ALP (4)
    • GE (11)
    • MH (3)
    • ML (4)
    • MM (4)
    • MR (3)
    Cutting Tool Material
    Cutting Tool Material
    • H T (3)
    • H W (86)
    Tolerance Class
    Tolerance Class
    • H (73)
    • M (2)
    • N (14)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (15)
    • SCREW-ON (6)
    • SHELL MILL (10)
    Back-End Diameter
    Back-End Diameter
    • 15.875 mm(1)
    • 16.0 mm(2)
    • 19.05 mm(2)
    • 20.0 mm(2)
    • 22.0 mm(5)
    • 24.375 mm(1)
    • 25.0 mm(3)
    • 25.401 mm(2)
    • 27.0 mm(1)
    • 28.0 mm(3)
    • 31.75 mm(1)
    • 32.0 mm(6)
    • 40.0 mm(2)
    Back-End Diameter Min-Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.625 in(1)
    • 0.63 in(2)
    • 0.75 in(2)
    • 0.787 in(2)
    • 0.866 in(5)
    • 0.96 in(1)
    • 0.984 in(3)
    • 1.0 in(2)
    • 1.063 in(1)
    • 1.102 in(3)
    • 1.25 in(1)
    • 1.26 in(6)
    • 1.575 in(2)
    Back-End Diameter Min-Back-End Diameter Max
    No filters matching ""
    öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
    Select the destination where you want to move -.
    Yeni Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Katalog Numarası

    ANSI Katalog Numarası

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    Pano bilgilerinizi görmek için oturum açmalısınız
    Session expired due to inactivity, please login again
    Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
    ürün(ler) sepete başarıyla eklendi

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Katalog Numarası Kalite  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)