TopGroove™

Filtreleri Seçin
Filtreler
    Filtreleri şurada görüntüle
    Metrik
    İnç
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (463)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(463)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(463)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(463)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(463)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(463)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(463)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(463)
    • M Stainless Steel (475)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(475)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(475)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(475)
    • K Cast Iron (474)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(474)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(474)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(474)
    • N Non-Ferrous Materials (475)
      • N1
        Wrought Aluminum (475)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(475)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(475)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (121)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (475)
      • N6
        Carbon, Graphite Composites, CFRP (475)
      • N7
        MMC's (121)
    • S High-Temp Alloys (475)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(475)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(475)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(475)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(475)
    • H Hardened Materials (108)
      • H1
        Hardened Materials 44-48 HRC(108)
      • H2
        Hardened Materials 48-55 HRC(108)
      • H3
        Hardened Materials 56-60 HRC(98)
      • H4
        Hardened Materials >60 HRC(98)
    Select All Star
    • DE (15)
    • IN (3)
    • US (190)
    Applications
    Applications
    • BoringBoring (3)
    • Face GroovingFace Grooving (426)
    • GroovingGrooving (422)
    • ID GroovingID Grooving (305)
    • ID Thread TurningID Thread Turning (44)
    • OD Thread TurningOD Thread Turning (67)
    • Plunge TurningPlunge Turning (264)
    • ProfilingProfiling (82)
    • ThreadingThreading (68)
    • TurningTurning (3)
    Type of Thread
    Type of Thread
    • 60 (107)
    • ACME (66)
    • API RD (45)
    • BSW (23)
    • BUTTRESS (22)
    • STUB ACME (45)
    • UN (93)
    • UNJ (23)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (450)
    • Lightly Interrupted Cut (450)
    • Smooth Cut (466)
    • Varying Depth of Cut (458)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (111)
    Tool Cutting Edge Angle Min-Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Boring Bar Shank (44)
    • Toolholder (47)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (174)
    • 2.0 (403)
    Cutting Edges Per Insert Min-Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 2.5 in(1)
    • 3.15 in(1)
    • 3.5 in(1)
    • 3.938 in(1)
    • 4.0 in(2)
    • 4.5 in(9)
    • 4.921 in(8)
    • 5.0 in(9)
    • 5.906 in(18)
    • 6.0 in(22)
    • 6.694 in(2)
    • 7.087 in(2)
    • 7.875 in(4)
    • 8.0 in(3)
    • 9.843 in(2)
    • 10.0 in(5)
    • 11.811 in(3)
    • 12.0 in(6)
    • 13.781 in(1)
    • 14.0 in(7)
    • 16.0 in(4)
    Over All Length [L] Min-Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 63.5 mm(1)
    • 80.0 mm(1)
    • 88.9 mm(1)
    • 100.0 mm(1)
    • 101.601 mm(2)
    • 114.301 mm(9)
    • 125.0 mm(8)
    • 127.0 mm(9)
    • 150.0 mm(18)
    • 152.4 mm(22)
    • 170.0 mm(2)
    • 180.0 mm(2)
    • 200.0 mm(4)
    • 203.201 mm(3)
    • 250.0 mm(2)
    • 254.0 mm(5)
    • 300.0 mm(3)
    • 304.8 mm(6)
    • 350.0 mm(1)
    • 355.6 mm(7)
    • 406.401 mm(4)
    Over All Length [L] Min-Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.003 in(73)
    • 0.004 in(90)
    • 0.006 in(9)
    • 0.007 in(97)
    • 0.008 in(280)
    • 0.01 in(51)
    • 0.012 in(23)
    • 0.014 in(76)
    • 0.016 in(45)
    • 0.02 in(43)
    • 0.023 in(100)
    • 0.03 in(43)
    • 0.031 in(100)
    • 0.039 in(91)
    • 0.047 in(94)
    • 0.049 in(87)
    • 0.06 in(90)
    • 0.062 in(49)
    • 0.063 in(76)
    • 0.069 in(88)
    • 0.078 in(48)
    • 0.079 in(67)
    • 0.089 in(65)
    • 0.095 in(68)
    • 0.098 in(20)
    • 0.125 in(24)
    Corner Radius Min-Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.076 mm(73)
    • 0.1 mm(90)
    • 0.151 mm(9)
    • 0.176 mm(97)
    • 0.2 mm(280)
    • 0.225 mm(23)
    • 0.25 mm(51)
    • 0.301 mm(23)
    • 0.325 mm(76)
    • 0.351 mm(45)
    • 0.4 mm(45)
    • 0.5 mm(43)
    • 0.576 mm(100)
    • 0.75 mm(43)
    • 0.775 mm(100)
    • 1.0 mm(91)
    • 1.201 mm(94)
    • 1.25 mm(87)
    • 1.5 mm(90)
    • 1.576 mm(49)
    • 1.6 mm(76)
    • 1.75 mm(88)
    • 1.975 mm(48)
    • 2.0 mm(67)
    • 2.25 mm(65)
    • 2.401 mm(68)
    • 2.5 mm(20)
    • 3.176 mm(24)
    Corner Radius Min-Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(365)
    Corner Chamfer Min-Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(365)
    Corner Chamfer Min-Corner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM (95)
    • TN10P (70)
    • TN6010 (231)
    • TN6025 (337)
    • TN7110 (102)
    • WU10HT (24)
    • WU10PT (35)
    • WU25PT (23)
    Hand Of Tool
    Hand Of Tool
    • L (34)
    • R (57)
    Wiper Insert
    Wiper Insert
    • N (475)
    F Dimension
    F Dimension
    • 6.551 mm(2)
    • 7.0 mm(2)
    • 10.3 mm(1)
    • 11.0 mm(4)
    • 11.101 mm(2)
    • 12.0 mm(1)
    • 12.701 mm(5)
    • 13.0 mm(2)
    • 14.275 mm(3)
    • 15.875 mm(3)
    • 16.0 mm(2)
    • 16.25 mm(2)
    • 17.0 mm(4)
    • 17.475 mm(4)
    • 19.05 mm(1)
    • 19.425 mm(1)
    • 20.0 mm(1)
    • 22.0 mm(2)
    • 22.225 mm(2)
    • 25.0 mm(3)
    • 25.401 mm(8)
    • 27.0 mm(3)
    • 31.75 mm(16)
    • 32.0 mm(7)
    • 32.525 mm(1)
    • 34.926 mm(2)
    • 35.0 mm(1)
    • 38.1 mm(4)
    • 40.0 mm(2)
    F Dimension Min-F Dimension Max
    F Dimension
    F Dimension
    • 0.258 in(2)
    • 0.276 in(2)
    • 0.406 in(1)
    • 0.433 in(4)
    • 0.437 in(2)
    • 0.473 in(1)
    • 0.5 in(5)
    • 0.512 in(2)
    • 0.562 in(3)
    • 0.625 in(3)
    • 0.63 in(2)
    • 0.64 in(2)
    • 0.669 in(4)
    • 0.689 in(4)
    • 0.75 in(1)
    • 0.765 in(1)
    • 0.787 in(1)
    • 0.866 in(2)
    • 0.875 in(2)
    • 0.984 in(3)
    • 1.0 in(8)
    • 1.063 in(3)
    • 1.25 in(16)
    • 1.26 in(7)
    • 1.281 in(1)
    • 1.375 in(2)
    • 1.379 in(1)
    • 1.5 in(4)
    • 1.575 in(2)
    F Dimension Min-F Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 mm(55)
    • 11.175 mm(2)
    • 11.5 mm(2)
    • 18.5 mm(2)
    • 18.55 mm(2)
    • 20.326 mm(1)
    • 22.0 mm(2)
    • 25.401 mm(2)
    • 26.0 mm(2)
    • 28.576 mm(2)
    • 34.0 mm(4)
    • 34.926 mm(4)
    • 41.301 mm(29)
    • 44.0 mm(2)
    • 44.45 mm(2)
    • 47.6 mm(27)
    • 50.801 mm(2)
    • 54.0 mm(3)
    • 55.875 mm(1)
    • 56.625 mm(3)
    • 57.151 mm(3)
    • 57.2 mm(12)
    • 60.325 mm(2)
    • 63.5 mm(7)
    • 69.851 mm(2)
    • 70.0 mm(1)
    • 76.2 mm(1)
    • 88.9 mm(139)
    • 139.701 mm(165)
    • 174.601 mm(57)
    • 209.601 mm(43)
    • 222.3 mm(26)
    Minimum Axial Groove Diameter Min-Minimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 in(55)
    • 0.44 in(2)
    • 0.453 in(2)
    • 0.728 in(2)
    • 0.73 in(2)
    • 0.8 in(1)
    • 0.866 in(2)
    • 1.0 in(2)
    • 1.024 in(2)
    • 1.125 in(2)
    • 1.339 in(4)
    • 1.375 in(4)
    • 1.627 in(29)
    • 1.732 in(2)
    • 1.75 in(2)
    • 1.874 in(27)
    • 2.0 in(2)
    • 2.126 in(3)
    • 2.2 in(1)
    • 2.229 in(3)
    • 2.25 in(3)
    • 2.253 in(12)
    • 2.375 in(2)
    • 2.5 in(7)
    • 2.75 in(2)
    • 2.757 in(1)
    • 3.0 in(1)
    • 3.5 in(139)
    • 5.5 in(165)
    • 6.875 in(57)
    • 8.252 in(43)
    • 8.752 in(26)
    Minimum Axial Groove Diameter Min-Minimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 393.661 in(471)
    Maximum Axial Groove Diameter Min-Maximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 9999.0 mm(471)
    Maximum Axial Groove Diameter Min-Maximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • E (51)
    • S (40)
    Rake Angle Style
    Rake Angle Style
    • NEUTRAL (ZERO) (91)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.0 in(7)
    • 1.23 in(1)
    • 1.232 in(1)
    • 1.29 in(1)
    • 1.5 in(1)
    • 1.891 in(2)
    • 2.0 in(15)
    • 2.5 in(3)
    • 2.52 in(2)
    • 3.0 in(2)
    • 3.15 in(2)
    • 3.938 in(4)
    • 4.0 in(6)
    • 5.0 in(3)
    • 5.039 in(2)
    • 6.0 in(2)
    • 6.299 in(3)
    • 7.0 in(2)
    • 7.875 in(1)
    • 8.0 in(4)
    Maximum Bore Depth Min-Maximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 25.401 mm(7)
    • 31.25 mm(1)
    • 31.3 mm(1)
    • 32.775 mm(1)
    • 38.1 mm(1)
    • 48.0 mm(2)
    • 50.801 mm(15)
    • 63.5 mm(3)
    • 64.0 mm(2)
    • 76.2 mm(2)
    • 80.0 mm(2)
    • 100.0 mm(4)
    • 101.601 mm(6)
    • 127.0 mm(3)
    • 128.0 mm(2)
    • 152.4 mm(2)
    • 160.0 mm(3)
    • 177.8 mm(2)
    • 200.0 mm(1)
    • 203.201 mm(4)
    Maximum Bore Depth Min-Maximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (44)
    frontEnd
    Clamp Style
    Clamp Style
    • N (111)
    Cutting Width
    Cutting Width
    • 0.02 in(42)
    • 0.031 in(50)
    • 0.039 in(93)
    • 0.041 in(24)
    • 0.047 in(107)
    • 0.055 in(43)
    • 0.058 in(41)
    • 0.06 in(97)
    • 0.062 in(128)
    • 0.067 in(42)
    • 0.069 in(88)
    • 0.073 in(47)
    • 0.077 in(43)
    • 0.078 in(49)
    • 0.079 in(109)
    • 0.088 in(90)
    • 0.089 in(65)
    • 0.094 in(25)
    • 0.095 in(117)
    • 0.098 in(99)
    • 0.108 in(90)
    • 0.119 in(125)
    • 0.125 in(146)
    • 0.126 in(47)
    • 0.128 in(87)
    • 0.138 in(111)
    • 0.147 in(25)
    • 0.152 in(41)
    • 0.156 in(53)
    • 0.157 in(77)
    • 0.167 in(46)
    • 0.177 in(70)
    • 0.188 in(57)
    • 0.189 in(83)
    • 0.192 in(25)
    • 0.195 in(24)
    • 0.196 in(47)
    • 0.197 in(22)
    • 0.217 in(19)
    • 0.237 in(19)
    • 0.25 in(31)
    Cutting Width Min-Cutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(42)
    • 0.775 mm(46)
    • 0.8 mm(43)
    • 1.0 mm(93)
    • 1.05 mm(24)
    • 1.201 mm(107)
    • 1.401 mm(43)
    • 1.475 mm(41)
    • 1.5 mm(97)
    • 1.576 mm(128)
    • 1.701 mm(42)
    • 1.75 mm(88)
    • 1.826 mm(47)
    • 1.951 mm(43)
    • 1.975 mm(49)
    • 2.0 mm(109)
    • 2.2 mm(88)
    • 2.225 mm(25)
    • 2.25 mm(65)
    • 2.375 mm(25)
    • 2.401 mm(117)
    • 2.5 mm(99)
    • 2.75 mm(90)
    • 3.0 mm(125)
    • 3.176 mm(146)
    • 3.2 mm(47)
    • 3.25 mm(87)
    • 3.5 mm(111)
    • 3.725 mm(25)
    • 3.85 mm(41)
    • 3.95 mm(52)
    • 3.975 mm(24)
    • 4.0 mm(77)
    • 4.25 mm(46)
    • 4.5 mm(70)
    • 4.775 mm(57)
    • 4.801 mm(83)
    • 4.875 mm(25)
    • 4.95 mm(24)
    • 4.976 mm(47)
    • 5.0 mm(22)
    • 5.5 mm(19)
    • 6.0 mm(19)
    • 6.351 mm(31)
    Cutting Width Min-Cutting Width Max
    Insert Size
    Insert Size
    • 1 (6)
    • 2 (41)
    • 3 (47)
    • 4 (15)
    • 6 (2)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.067 in(1)
    • 0.138 in(23)
    • 0.21 in(28)
    • 0.225 in(1)
    • 0.294 in(13)
    • 0.334 in(2)
    Maximum Cutting Depth Min-Maximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 1.701 mm(1)
    • 3.5 mm(23)
    • 5.325 mm(28)
    • 5.726 mm(1)
    • 7.476 mm(13)
    • 8.475 mm(2)
    Maximum Cutting Depth Min-Maximum Cutting Depth Max
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 0.65 mm(3)
    • 0.75 mm(30)
    • 1.026 mm(55)
    • 1.1 mm(42)
    • 1.326 mm(3)
    • 1.901 mm(2)
    • 1.975 mm(4)
    • 2.551 mm(3)
    • 2.75 mm(2)
    • 2.926 mm(32)
    • 3.801 mm(10)
    • 3.85 mm(3)
    Maximum Cutting Insert Depth Min-Maximum Cutting Insert Depth Max
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 0.027 in(3)
    • 0.03 in(30)
    • 0.04 in(55)
    • 0.044 in(42)
    • 0.053 in(3)
    • 0.075 in(2)
    • 0.078 in(4)
    • 0.1 in(3)
    • 0.108 in(2)
    • 0.115 in(32)
    • 0.15 in(10)
    • 0.152 in(3)
    Maximum Cutting Insert Depth Min-Maximum Cutting Insert Depth Max
    insertGeometry
    Shape
    Shape
    • TN-TOP NOTCH (365)
    Insert Seat Size
    Insert Seat Size
    • 1 (3)
    • 2 (119)
    • 3 (192)
    • 4 (51)
    Cutting Tool Material
    Cutting Tool Material
    • H W (475)
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (44)
    • SQUARE SHANK (47)
    Back-End Diameter
    Back-End Diameter
    • 9.525 mm(1)
    • 10.0 mm(1)
    • 12.0 mm(3)
    • 12.701 mm(3)
    • 15.875 mm(3)
    • 16.0 mm(2)
    • 19.05 mm(2)
    • 20.0 mm(2)
    • 25.0 mm(4)
    • 25.401 mm(6)
    • 31.75 mm(3)
    • 32.0 mm(2)
    • 38.1 mm(2)
    • 40.0 mm(3)
    • 44.45 mm(2)
    • 50.0 mm(1)
    • 50.801 mm(4)
    Back-End Diameter Min-Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.375 in(1)
    • 0.394 in(1)
    • 0.473 in(3)
    • 0.5 in(3)
    • 0.625 in(3)
    • 0.63 in(2)
    • 0.75 in(2)
    • 0.787 in(2)
    • 0.984 in(4)
    • 1.0 in(6)
    • 1.25 in(3)
    • 1.26 in(2)
    • 1.5 in(2)
    • 1.575 in(3)
    • 1.75 in(2)
    • 1.969 in(1)
    • 2.0 in(4)
    Back-End Diameter Min-Back-End Diameter Max
    Shank Height
    Shank Height
    • 0.375 in(1)
    • 0.473 in(2)
    • 0.5 in(4)
    • 0.625 in(3)
    • 0.63 in(2)
    • 0.75 in(6)
    • 0.787 in(4)
    • 0.984 in(6)
    • 1.0 in(12)
    • 1.25 in(5)
    • 1.26 in(2)
    Shank Height Min-Shank Height Max
    Shank Height
    Shank Height
    • 9.525 mm(1)
    • 12.0 mm(2)
    • 12.701 mm(4)
    • 15.875 mm(3)
    • 16.0 mm(2)
    • 19.05 mm(6)
    • 20.0 mm(4)
    • 25.0 mm(6)
    • 25.401 mm(12)
    • 31.75 mm(5)
    • 32.0 mm(2)
    Shank Height Min-Shank Height Max
    Shank Width
    Shank Width
    • 0.375 in(1)
    • 0.473 in(2)
    • 0.5 in(4)
    • 0.625 in(3)
    • 0.63 in(2)
    • 0.75 in(6)
    • 0.787 in(4)
    • 0.984 in(6)
    • 1.0 in(13)
    • 1.25 in(4)
    • 1.26 in(2)
    Shank Width Min-Shank Width Max
    Shank Width
    Shank Width
    • 9.525 mm(1)
    • 12.0 mm(2)
    • 12.701 mm(4)
    • 15.875 mm(3)
    • 16.0 mm(2)
    • 19.05 mm(6)
    • 20.0 mm(4)
    • 25.0 mm(6)
    • 25.401 mm(13)
    • 31.75 mm(4)
    • 32.0 mm(2)
    Shank Width Min-Shank Width Max
    No filters matching ""
    öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
    Select the destination where you want to move -.
    Yeni Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Katalog Numarası

    ANSI Katalog Numarası

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    Pano bilgilerinizi görmek için oturum açmalısınız
    Session expired due to inactivity, please login again
    Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
    ürün(ler) sepete başarıyla eklendi

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Katalog NumarasıKalite  

    You are about to leave the Solution building process.

    Are you sure you want to leave?