Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle
Ürün Önerileri
Product Family suggestions
Merhaba, User Name
Seçtiğiniz Hesap:
There is an issue with your account. Please contact customer support.
Sold To Account
Hesabı Değiştir
Ship To Account
Hesabı Değiştir
- Kontrol Paneli
- Siparişleri Yönet
- Kanalları Yönet
- Adres Defteri
-
Bildirimler
Tümünü okundu olarak işaretle - Parolayı Değiştir
- Profilim
- Oturumu Kapat
Ürün(ler)
sepete başarıyla eklendi
Sepeti Görüntüle
Sepeti Görüntüle
Güçlü takımlama çözümleri indirimde.
Şimdi satın alın.
Ürün(ler)
sepete başarıyla eklendi
Sepeti Görüntüle
Sepeti Görüntüle
Editing Solution
Adding Solution
Solution Name: {{SolutionName}}- Ürünler
- /
- Karbür parmak frezeler
- /
- Yüksek Performanslı DUO-LOCK
- /
- VariMill II™ • 5747 • 5748 • 5-Kanal • Metrik
Sending to SolidCAM in progress...
Downloaded file will be available after import in the SolidCAM tool library.
VariMill II™ • 5747 • 5748 • 5-Kanal • Metrik
VariMill II™ • 5747 • 5748 • Eşbiçimli olmayan kanal aralığı
Özellikler ve avantajlar
- Daha pürüzsüz bir işleme için eşit olmayan kanal aralığı yapılandırması kavrama titreşimini ve tırlama seslerini en aza indirir.
- Merkezden kesme özelliği yok.
- 3° 'ye kadar rampalama.
- 1 x D'ye kadar kanal açabilen beş kanallı geometri.
- Kaba ve hassas son işleme işlemleri için daha az kurulum gerektiren özellikli takım.
- Standart ürünler listelenmiştir. Siparişe dayalı üretilen ilave tip ve kaplamalar.
Kullanım ve uygulama alanları
- 100029626
- Trochoidal Milling
- Ramping: 3°
- Slotting: Square End
- Side Milling/Shoulder Milling: Square End
- Helix Angle: 38°
- Tool Dimensions: Flute Configuration: 5
VariMill II™ • 5747 • Eşbiçimli olmayan kanal aralığı
<="" td=""> | <="" td=""> | <="" td="" /> | ||||||||||||||||||
Side Milling (A) and Slotting (B) | short | medium | long | Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%. | ||||||||||||||||
A | B | adapter reach | D1
|
|||||||||||||||||
WP15PE | WP15PE | WP15PE | ||||||||||||||||||
Cutting Speed
|
Cutting Speed
|
Cutting Speed
|
||||||||||||||||||
Material
|
ap | ae | ap | Min | Max | Min | Max | Min | Max | mm | 10,0 | 12,0 | 16,0 | 20,0 | 25,0 | 32,0 | ||||
P | 0 | 1,5 x D | 0,5 x D | 1 x D | 150 | – | 200 | 135 | – | 180 | 135 | – | 180 | fz | 0,061 | 0,070 | 0,086 | 0,097 | 0,105 | 0,106 |
1 | 1,5 x D | 0,5 x D | 1 x D | 150 | – | 200 | 135 | – | 180 | 135 | – | 180 | fz | 0,061 | 0,070 | 0,086 | 0,097 | 0,105 | 0,106 | |
2 | 1,5 x D | 0,5 x D | 1 x D | 140 | – | 190 | 126 | – | 171 | 126 | – | 171 | fz | 0,061 | 0,070 | 0,086 | 0,097 | 0,105 | 0,106 | |
3 | 1,5 x D | 0,5 x D | 1 x D | 120 | – | 160 | 108 | – | 144 | 108 | – | 144 | fz | 0,051 | 0,060 | 0,074 | 0,086 | 0,097 | 0,105 | |
4 | 1,5 x D | 0,5 x D | 0,75 x D | 90 | – | 150 | 81 | – | 135 | 81 | – | 135 | fz | 0,046 | 0,053 | 0,065 | 0,075 | 0,083 | 0,087 | |
5 | 1,5 x D | 0,5 x D | 1 x D | 60 | – | 100 | 51 | – | 85 | 48 | – | 80 | fz | 0,041 | 0,048 | 0,059 | 0,069 | 0,077 | 0,084 | |
6 | 1,5 x D | 0,5 x D | 0,75 x D | 50 | – | 75 | 42 | – | 64 | 40 | – | 60 | fz | 0,034 | 0,040 | 0,048 | 0,055 | 0,060 | 0,062 | |
M | 1 | 1,5 x D | 0,5 x D | 1 x D | 90 | – | 115 | 72 | – | 92 | 63 | – | 80 | fz | 0,051 | 0,060 | 0,074 | 0,086 | 0,097 | 0,105 |
2 | 1,5 x D | 0,5 x D | 1 x D | 60 | – | 80 | 48 | – | 64 | 42 | – | 56 | fz | 0,041 | 0,048 | 0,059 | 0,069 | 0,077 | 0,084 | |
3 | 1,5 x D | 0,5 x D | 1 x D | 60 | – | 70 | 48 | – | 56 | 42 | – | 49 | fz | 0,034 | 0,040 | 0,048 | 0,055 | 0,060 | 0,062 | |
K | 1 | 1,5 x D | 0,5 x D | 1 x D | 120 | – | 150 | 108 | – | 135 | 108 | – | 135 | fz | 0,061 | 0,070 | 0,086 | 0,097 | 0,105 | 0,106 |
2 | 1,5 x D | 0,5 x D | 1 x D | 110 | – | 140 | 99 | – | 126 | 99 | – | 126 | fz | 0,051 | 0,060 | 0,074 | 0,086 | 0,097 | 0,105 | |
3 | 1,5 x D | 0,5 x D | 1 x D | 110 | – | 130 | 99 | – | 117 | 99 | – | 117 | fz | 0,041 | 0,048 | 0,059 | 0,069 | 0,077 | 0,084 | |
S | 1 | 1,5 x D | 0,3 x D | 0,3 x D | 50 | – | 90 | 40 | – | 72 | 30 | – | 54 | fz | 0,051 | 0,060 | 0,074 | 0,086 | 0,097 | 0,105 |
2 | 1,5 x D | 0,3 x D | 0,3 x D | 25 | – | 40 | 20 | – | 32 | 15 | – | 24 | fz | 0,027 | 0,032 | 0,039 | 0,046 | 0,052 | 0,057 | |
3 | 1,5 x D | 0,5 x D | 1 x D | 60 | – | 80 | 48 | – | 64 | 36 | – | 48 | fz | 0,041 | 0,048 | 0,059 | 0,069 | 0,077 | 0,084 | |
4 | 1,5 x D | 0,5 x D | 1 x D | 50 | – | 60 | 40 | – | 48 | 30 | – | 36 | fz | 0,038 | 0,044 | 0,055 | 0,063 | 0,071 | 0,077 | |
H | 1 | 1,5 x D | 0,5 x D | 0,75 x D | 80 | – | 140 | 64 | – | 112 | 48 | – | 84 | fz | 0,046 | 0,053 | 0,065 | 0,075 | 0,083 | 0,087 |
2 | 1,5 x D | 0,2 x D | 0,5 x D | 70 | – | 120 | 56 | – | 96 | 42 | – | 72 | fz | 0,034 | 0,040 | 0,048 | 0,055 | 0,060 | 0,062 |
VariMill II™ • 5748 • Unequal Flute Spacing
<="" td=""> | <="" td=""> | <="" td="" /> | ||||||||||||||||||
Side Milling (A) and Slotting (B) | short | medium | long | Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%. | ||||||||||||||||
A | B | adapter reach | D1
|
|||||||||||||||||
WS15PE | WS15PE | WS15PE | ||||||||||||||||||
Cutting Speed
|
Cutting Speed
|
Cutting Speed
|
||||||||||||||||||
Material
|
ap | ae | ap | Min | Max | Min | Max | Min | Max | mm | 10,0 | 12,0 | 16,0 | 20,0 | 25,0 | 32,0 | ||||
P | 5 | 1,5 x D | 0,5 x D | 1 x D | 60 | – | 100 | 51 | – | 85 | 48 | – | 80 | fz | 0,041 | 0,048 | 0,059 | 0,069 | 0,077 | 0,084 |
6 | 1,5 x D | 0,5 x D | 0,75 x D | 50 | – | 75 | 42 | – | 64 | 40 | – | 60 | fz | 0,034 | 0,040 | 0,048 | 0,055 | 0,060 | 0,062 | |
S | 1 | 1,5 x D | 0,3 x D | 0,3 x D | 50 | – | 90 | 40 | – | 72 | 30 | – | 54 | fz | 0,051 | 0,060 | 0,074 | 0,086 | 0,097 | 0,105 |
2 | 1,5 x D | 0,3 x D | 0,3 x D | 25 | – | 40 | 20 | – | 32 | 15 | – | 24 | fz | 0,027 | 0,032 | 0,039 | 0,046 | 0,052 | 0,057 | |
3 | 1,5 x D | 0,5 x D | 1 x D | 60 | – | 80 | 48 | – | 64 | 36 | – | 48 | fz | 0,041 | 0,048 | 0,059 | 0,069 | 0,077 | 0,084 | |
4 | 1,5 x D | 0,5 x D | 1 x D | 50 | – | 60 | 40 | – | 48 | 30 | – | 36 | fz | 0,038 | 0,044 | 0,055 | 0,063 | 0,071 | 0,077 | |
H | 1 | 1,5 x D | 0,5 x D | 0,75 x D | 80 | – | 140 | 64 | – | 112 | 48 | – | 84 | fz | 0,046 | 0,053 | 0,065 | 0,075 | 0,083 | 0,087 |
2 | 1,5 x D | 0,2 x D | 0,5 x D | 70 | – | 120 | 56 | – | 96 | 42 | – | 72 | fz | 0,034 | 0,040 | 0,048 | 0,055 | 0,060 | 0,062 |