WCE5 • Series W521 • Sharp Edge • 5 Flute • Weldon® Shank • Long • Inch

Name: WCE5 • Series W521 • Sharp Edge • 5 Flute • Weldon® Shank • Long • Inch
SKU: 7008714
Rating: 0 (0 reviews)

Versatile 5-Flute Solid Carbide End Mill

Metrik

İnç

SAP Material Number	7008714
ISO Catalog Number	W521E13026SZW
ANSI Catalog Number	W521E13026SZW
Grade	WU20PE
[D] Adapter / Shank / Bore Diameter	12.7 mm
[D] Adapter / Shank / Bore Diameter	.5 in
[D1] Effective Cutting Diameter	12.7 mm
[D1] Effective Cutting Diameter	.5 in
[AP1MAX] 1st Maximum Cutting Depth	41.275 mm
[AP1MAX] 1st Maximum Cutting Depth	1.625 in
[L] Overall Length	101.6 mm
[L] Overall Length	4 in

Tüm Ürün Değişkenlerini görün

Kullanım ve uygulama alanları

Trochoidal Milling
Helical Milling
Ramping: Blank
Side Milling/Shoulder Milling: Square End

İş Parçası Malzemeleri

P Steel

M Stainless Steel

K Cast Iron

S High-Temp Alloys

H Hardened Materials

Özellikler ve avantajlar

WU20PE Grade

38 degree helix to increase performance in a variety of applications

Unequal index to reduce vibration/chatter

Eccentric relief to provide vibration dampening and increase tool life on Steel, Stainless Steel and Cast Iron materials

Core taper to increase tool stability and chip evacuation

Makine Tarafı

yükleniyor...

İş Parçası Tarafı

yükleniyor...

Uyumlu Parçalar
Uygulama bilgisi

		<="" td="">		<="" td="">	<="" td="" />
					WU20PE			Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.
		Side Milling		Slotting	Cutting Speed Vc m/min				D1 Diameter
Material Group		ap	ae	ap	Min	Start	Max	mm	4,0	5,0	6,0	8,0	10,0	12,0	14,0	16,0	18,0	20,0	25,0
P	0	ap1max	0,4 x D	0,3 x D	150	–	200	fz	0,028	0,036	0,044	0,060	0,072	0,083	0,092	0,101	0,108	0,114	0,124
P	1	ap1max	0,4 x D	0,3 x D	150	–	200	fz	0,028	0,036	0,044	0,060	0,072	0,083	0,092	0,101	0,108	0,114	0,124
P	2	ap1max	0,4 x D	0,3 x D	140	–	190	fz	0,028	0,036	0,044	0,060	0,072	0,083	0,092	0,101	0,108	0,114	0,124
P	3	ap1max	0,4 x D	0,3 x D	120	–	160	fz	0,023	0,030	0,036	0,050	0,061	0,070	0,079	0,087	0,095	0,101	0,114
P	4	ap1max	0,4 x D	0,3 x D	90	–	150	fz	0,021	0,027	0,033	0,045	0,054	0,062	0,070	0,077	0,083	0,088	0,098
P	5	ap1max	0,4 x D	0,3 x D	60	–	100	fz	0,019	0,024	0,029	0,040	0,048	0,056	0,063	0,070	0,076	0,081	0,091
P	6	ap1max	0,4 x D	0,3 x D	50	–	75	fz	0,016	0,020	0,025	0,034	0,040	0,047	0,052	0,057	0,061	0,065	0,071
M	1	ap1max	0,4 x D	0,3 x D	90	–	115	fz	0,023	0,030	0,036	0,050	0,061	0,070	0,079	0,087	0,095	0,101	0,114
M	2	ap1max	0,4 x D	0,3 x D	60	–	80	fz	0,019	0,024	0,029	0,040	0,048	0,056	0,063	0,070	0,076	0,081	0,091
M	3	ap1max	0,4 x D	0,3 x D	60	–	70	fz	0,016	0,020	0,025	0,034	0,040	0,047	0,052	0,057	0,061	0,065	0,071
K	1	ap1max	0,4 x D	0,3 x D	120	–	150	fz	0,028	0,036	0,044	0,060	0,072	0,083	0,092	0,101	0,108	0,114	0,124
K	2	ap1max	0,4 x D	0,3 x D	110	–	140	fz	0,023	0,030	0,036	0,050	0,061	0,070	0,079	0,087	0,095	0,101	0,114
K	3	ap1max	0,4 x D	0,3 x D	110	–	130	fz	0,019	0,024	0,029	0,040	0,048	0,056	0,063	0,070	0,076	0,081	0,091
S	1	ap1max	0,3 x D	0,2 x D	50	–	90	fz	0,023	0,030	0,036	0,050	0,061	0,070	0,079	0,087	0,095	0,101	0,114
S	2	ap1max	0,3 x D	0,2 x D	25	–	40	fz	0,013	0,016	0,019	0,026	0,032	0,037	0,042	0,046	0,050	0,054	0,061
S	3	ap1max	0,4 x D	0,3 x D	60	–	80	fz	0,019	0,024	0,029	0,040	0,048	0,056	0,063	0,070	0,076	0,081	0,091
S	4	ap1max	0,4 x D	0,3 x D	50	–	60	fz	0,016	0,021	0,026	0,037	0,045	0,052	0,058	0,064	0,069	0,074	0,084
H	1	ap1max	0,4 x D	0,3 x D	80	–	140	fz	0,021	0,027	0,033	0,045	0,054	0,062	0,070	0,077	0,083	0,088	0,098
H	2	ap1max	0,2 x D	0,3 x D	70	–	120	fz	0,016	0,020	0,025	0,034	0,040	0,047	0,052	0,057	0,061	0,065	0,071

		<="" td="">		<="" td="">	<="" td="" />
					WU20PE			Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%.
		Side Milling		Slotting	Cutting Speed Vc m/min				D1 Diameter
Material Group		ap	ae	ap	Min	Start	Max	frac.	3/16	1/4	5/16	3/8	7/16	1/2	5/8	3/4	1	1 1/4
Material Group		ap	ae	ap	Min	Start	Max	in	0.1875	0.2500	0.3125	0.3750	0.4375	0.5000	0.6250	0.7500	1.0000	1.2500
P	0	ap1max	0.4 x D	0.3 x D	490	–	660	IPT	0.0013	0.0018	0.0023	0.0027	0.0031	0.0034	0.0039	0.0044	0.0049	0.0049
P	1	ap1max	0.4 x D	0.3 x D	490	–	660	IPT	0.0013	0.0018	0.0023	0.0027	0.0031	0.0034	0.0039	0.0044	0.0049	0.0049
P	2	ap1max	0.4 x D	0.3 x D	460	–	620	IPT	0.0013	0.0018	0.0023	0.0027	0.0031	0.0034	0.0039	0.0044	0.0049	0.0049
P	3	ap1max	0.4 x D	0.3 x D	390	–	520	IPT	0.0011	0.0015	0.0020	0.0023	0.0026	0.0029	0.0034	0.0039	0.0045	0.0048
P	4	ap1max	0.4 x D	0.3 x D	300	–	490	IPT	0.0010	0.0014	0.0017	0.0020	0.0023	0.0026	0.0030	0.0034	0.0039	0.0040
P	5	ap1max	0.4 x D	0.3 x D	200	–	330	IPT	0.0009	0.0012	0.0016	0.0018	0.0021	0.0023	0.0027	0.0031	0.0036	0.0039
P	6	ap1max	0.4 x D	0.3 x D	160	–	250	IPT	0.0008	0.0010	0.0013	0.0015	0.0017	0.0019	0.0022	0.0025	0.0028	0.0029
M	1	ap1max	0.4 x D	0.3 x D	300	–	380	IPT	0.0011	0.0015	0.0020	0.0023	0.0026	0.0029	0.0034	0.0039	0.0045	0.0048
M	2	ap1max	0.4 x D	0.3 x D	200	–	260	IPT	0.0009	0.0012	0.0016	0.0018	0.0021	0.0023	0.0027	0.0031	0.0036	0.0039
M	3	ap1max	0.4 x D	0.3 x D	200	–	230	IPT	0.0008	0.0010	0.0013	0.0015	0.0017	0.0019	0.0022	0.0025	0.0028	0.0029
K	1	ap1max	0.4 x D	0.3 x D	390	–	490	IPT	0.0013	0.0018	0.0023	0.0027	0.0031	0.0034	0.0039	0.0044	0.0049	0.0049
K	2	ap1max	0.4 x D	0.3 x D	360	–	460	IPT	0.0011	0.0015	0.0020	0.0023	0.0026	0.0029	0.0034	0.0039	0.0045	0.0048
K	3	ap1max	0.4 x D	0.3 x D	360	–	430	IPT	0.0009	0.0012	0.0016	0.0018	0.0021	0.0023	0.0027	0.0031	0.0036	0.0039
S	1	ap1max	0.3 x D	0.2 x D	160	–	300	IPT	0.0011	0.0015	0.0020	0.0023	0.0026	0.0029	0.0034	0.0039	0.0045	0.0048
S	2	ap1max	0.3 x D	0.2 x D	80	–	130	IPT	0.0006	0.0008	0.0010	0.0012	0.0014	0.0015	0.0018	0.0021	0.0024	0.0026
S	3	ap1max	0.4 x D	0.3 x D	200	–	260	IPT	0.0009	0.0012	0.0016	0.0018	0.0021	0.0023	0.0027	0.0031	0.0036	0.0039
S	4	ap1max	0.4 x D	0.3 x D	160	–	200	IPT	0.0008	0.0011	0.0014	0.0017	0.0019	0.0021	0.0025	0.0028	0.0033	0.0036
H	1	ap1max	0.4 x D	0.3 x D	260	–	460	IPT	0.0010	0.0014	0.0017	0.0020	0.0023	0.0026	0.0030	0.0034	0.0039	0.0040
H	2	ap1max	0.2 x D	0.3 x D	230	–	390	IPT	0.0008	0.0010	0.0013	0.0015	0.0017	0.0019	0.0022	0.0025	0.0028	0.0029

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO Katalog Numarası	Kalite

Hoş Geldiniz

Lütfen tercihlerinizi onaylayın

Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

Satış Ekibimizle İletişime Geçin

Satış Ekibimizle İletişime Geçin

Editing Solution

Adding Solution