Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

WIDIA Hizmetinizde

Ürüne Özel Bir Sorunuz mu Var?

Uzmanlık Alanına göre Global Hizmet Profesyonellerinin tam listesine bakın

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Back to Solution

Editing Solution

Adding Solution

Solution Name: {{SolutionName}}

D-Bağlama

Filtreleri Seçin
Filters
Filtreler
Filtreler
Filtreleri şurada görüntüle
Metrik
İnç
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (34)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (34)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (34)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (34)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (34)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (34)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (34)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (34)
  • M Stainless Steel (34)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (34)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (34)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (34)
  • K Cast Iron (34)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (34)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (34)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (34)
  • N Non-Ferrous Materials (34)
    • N1
      Wrought Aluminum
      (32)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (32)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (13)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (34)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (32)
    • N6
      Carbon, Graphite Composites, CFRP
      (26)
    • N7
      MMC's
      (32)
  • S High-Temp Alloys (34)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (34)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (34)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (34)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (34)
  • H Hardened Materials (28)
    • H1
      Hardened Materials 44-48 HRC
      (28)
    • H2
      Hardened Materials 48-55 HRC
      (28)
    • H3
      Hardened Materials 56-60 HRC
      (28)
    • H4
      Hardened Materials >60 HRC
      (26)
Applications
Applications
  • Facing Facing (34)
  • ID Facing ID Facing (28)
  • Multiple Direction Cutting Multiple Direction Cutting (34)
  • Plunge Turning Plunge Turning (12)
  • TRN Boring TRN Boring (28)
  • Turning Turning (34)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (34)
  • Interrupted (27)
  • Lightly Interrupted Cut (34)
  • Smooth Cut (34)
  • Varying Depth of Cut (34)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (2)
  • 62.5 (1)
  • 72.5 (1)
  • 75.0 (6)
  • 90.0 (2)
  • 93.0 (10)
  • 95.0 (10)
  • 107.5 (2)
Tool Cutting Edge Angle Min - Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • PSC (6)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (22)
  • 2.0 (26)
  • 3.0 (2)
  • 4.0 (28)
  • 6.0 (4)
  • 8.0 (17)
Cutting Edges Per Insert Min - Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (24)
  • 0.008 in (17)
  • 0.014 in (7)
  • 0.016 in (28)
  • 0.024 in (2)
  • 0.031 in (32)
  • 0.047 in (32)
  • 0.062 in (6)
  • 0.063 in (25)
  • 0.094 in (4)
  • 0.095 in (8)
  • 0.126 in (2)
  • 0.25 in (2)
Corner Radius Min - Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (24)
  • 0.2 mm (17)
  • 0.351 mm (7)
  • 0.4 mm (28)
  • 0.601 mm (2)
  • 0.8 mm (32)
  • 1.201 mm (32)
  • 1.576 mm (6)
  • 1.6 mm (25)
  • 2.375 mm (4)
  • 2.401 mm (8)
  • 3.2 mm (2)
  • 6.351 mm (2)
Corner Radius Min - Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (24)
  • 241 (6)
  • CL4 (17)
  • CM2 (22)
  • CM3 (17)
  • CM4 (10)
  • CPX (21)
  • CW2 (13)
  • CW2015 (24)
  • CW5025 (28)
  • GX (10)
  • HK1500 (21)
  • HT2 (15)
  • HTX (6)
  • K060 (10)
  • K090 (28)
  • K1 (8)
  • K10M (28)
  • K10P (28)
  • K10U (22)
  • K15U (22)
  • K20K (32)
  • K21 (10)
  • K25M (28)
  • K25P (26)
  • K313 (32)
  • K35P (15)
  • K420 (19)
  • K45 (13)
  • K68 (28)
  • KB1340 (10)
  • KB1345 (8)
  • KB1610 (15)
  • KB1625 (13)
  • KB1630 (11)
  • KB5610 (13)
  • KB5625 (13)
  • KB5630 (11)
  • KB9610 (22)
  • KB9640 (14)
  • KBH10 (22)
  • KBH10B (18)
  • KBH20 (22)
  • KBH20B (18)
  • KBK35 (6)
  • KC210 (19)
  • KC250 (14)
  • KC5010 (34)
  • KC5025 (32)
  • KC5410 (26)
  • KC5510 (32)
  • KC5525 (21)
  • KC710 (8)
  • KC720 (17)
  • KC722 (6)
  • KC730 (23)
  • KC7310 (32)
  • KC732 (17)
  • KC8050 (34)
  • KC810 (32)
  • KC850 (32)
  • KC9010 (32)
  • KC9025 (34)
  • KC910 (30)
  • KC9105 (32)
  • KC9110 (34)
  • KC9120 (32)
  • KC9125 (34)
  • KC9125RR (2)
  • KC9140 (34)
  • KC9145 (30)
  • KC9210 (7)
  • KC9215 (32)
  • KC9225 (32)
  • KC9240 (32)
  • KC9240NEW (32)
  • KC9245 (32)
  • KC9315 (34)
  • KC9320 (34)
  • KC9325 (34)
  • KC935 (34)
  • KC950 (30)
  • KC990 (34)
  • KCD25 (2)
  • KCK05 (34)
  • KCK05B (28)
  • KCK15 (34)
  • KCK15B (34)
  • KCK20 (34)
  • KCK20B (34)
  • KCM15 (32)
  • KCM15B (32)
  • KCM25 (32)
  • KCM25B (32)
  • KCM35 (30)
  • KCM35B (25)
  • KCP05 (28)
  • KCP05B (26)
  • KCP10 (34)
  • KCP10B (34)
  • KCP25 (34)
  • KCP25B (34)
  • KCP25C (34)
  • KCP30 (34)
  • KCP30B (27)
  • KCP40 (25)
  • KCP40B (32)
  • KCPK05 (30)
  • KCS10 (6)
  • KCS10B (30)
  • KCU10 (34)
  • KCU10B (34)
  • KCU25 (32)
  • KD050 (13)
  • KD081 (13)
  • KD100 (11)
  • KD120 (13)
  • KD1400 (13)
  • KD1405 (11)
  • KD1425 (13)
  • KM1 (8)
  • KMF (6)
  • KS15 (6)
  • KT1120 (5)
  • KT125 (20)
  • KT150 (13)
  • KT175 (20)
  • KT315 (26)
  • KT325 (15)
  • KT5020 (3)
  • KTP10 (2)
  • KU10T (26)
  • KU30T (34)
  • KY1310 (16)
  • KY1320 (28)
  • KY1540 (12)
  • KY1615 (26)
  • KY2000 (14)
  • KY2100 (10)
  • KY3000 (26)
  • KY3400 (18)
  • KY3500 (28)
  • KY4000 (13)
  • KY4300 (12)
  • KY4400 (28)
  • KYHK15B (28)
  • KYK10 (12)
  • KYK25 (18)
  • KYK35 (28)
  • KYS25 (12)
  • KYS30 (14)
  • NL200 (13)
  • NL250 (30)
  • NL300 (21)
  • NL400 (12)
  • NL920 (23)
  • P25 (8)
  • PB100 (6)
  • PB170 (6)
  • PB250 (6)
  • PB300 (6)
  • PS5 (15)
  • SP0819 (21)
  • SP0A00 (2)
  • SP3019 (14)
  • SP4019 (18)
  • SP4036 (3)
  • SP4093 (3)
  • SP61EJ (2)
  • SPADAP (2)
  • SPSREJ (2)
  • THM (10)
  • THM-X (15)
  • THMF-X (8)
  • TN10P (30)
  • TN10U (22)
  • TN15M (28)
  • TN15U (22)
  • TN2000 (21)
  • TN20K (32)
  • TN20P (34)
  • TN30M (30)
  • TN30P (25)
  • TN4000 (21)
  • TN5015 (27)
  • TN5020 (23)
  • TN5105 (21)
  • TN5120 (25)
  • TN6010 (18)
  • TN6025 (17)
  • TN7005 (19)
  • TN7010 (27)
  • TN7015 (27)
  • TN7025 (27)
  • TN7035 (23)
  • TN7105 (19)
  • TN7110 (25)
  • TN7115 (25)
  • TN7125 (25)
  • TN7135 (23)
  • TN8025 (27)
  • TTI15 (15)
  • TTM09 (2)
  • TTR (8)
  • TTS (17)
  • TTX (13)
  • WBH10C (22)
  • WBH10P (11)
  • WBH10U (15)
  • WBH20P (22)
  • WBH25P (13)
  • WBH25U (17)
  • WBH30P (11)
  • WBK40U (10)
  • WBK45U (15)
  • WDN00U (8)
  • WDN25U (13)
  • WK05CT (34)
  • WK15CT (21)
  • WK20CT (34)
  • WM15CT (32)
  • WM25CT (32)
  • WM35CT (32)
  • WP05CT (8)
  • WP15CT (34)
  • WP20TT (2)
  • WP25CT (34)
  • WP35CT (34)
  • WS10PT (30)
  • WS25PT (32)
  • WU10HT (32)
  • WU10PT (24)
  • WU25PT (24)
  • X00511 (6)
  • X00580 (6)
  • X00581 (6)
  • X00582 (6)
  • X00583 (6)
  • X00584 (6)
  • X00585 (6)
  • X00586 (6)
  • X00591 (6)
  • X00592 (6)
  • X00593 (6)
  • X00594 (6)
  • X00596 (6)
  • X00597 (6)
  • X00599 (6)
Hand Of Tool
Hand Of Tool
  • L (1)
  • N (2)
  • R (3)
Wiper Insert
Wiper Insert
  • N (34)
  • Y (17)
F Dimension
F Dimension
  • 0.0 mm (2)
  • 27.0 mm (4)
F Dimension Min - F Dimension Max
F Dimension
F Dimension
  • 0.0 in (2)
  • 1.063 in (4)
F Dimension Min - F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 65.0 mm (6)
  • 110.0 mm (17)
  • 125.0 mm (5)
Minimum Axial Groove Diameter Min - Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 2.559 in (6)
  • 4.331 in (17)
  • 4.921 in (5)
Minimum Axial Groove Diameter Min - Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • S (6)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (5)
  • NEGATIVE-ZERO (1)
Maximum Bore Depth
Maximum Bore Depth
  • 1.969 in (1)
  • 2.047 in (1)
  • 2.362 in (24)
  • 2.559 in (2)
Maximum Bore Depth Min - Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 50.0 mm (1)
  • 52.0 mm (1)
  • 60.0 mm (24)
  • 65.0 mm (2)
Maximum Bore Depth Min - Maximum Bore Depth Max
frontEnd
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (10)
  • D-DIAMOND/RHOMBIC 55 (11)
  • R-ROUND (2)
  • S-SQUARE 90 (4)
  • V-DIAMOND/RHOMBIC 35 (3)
  • W-TRIGON 80 (4)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (26)
  • B L (22)
  • C A (30)
  • C N (30)
  • D P (20)
  • H T (26)
  • H W (34)
backEnd
Connection Type
Connection Type
  • TAPER SHANK (6)
System Size
System Size
  • PSC50 (3)
No filters matching ""
Ürünleri şurada görüntüleyin:
Metrik
İnç

ORİJİNAL ÜRÜN

DSSN 45° DSSN 45°

Kesme ÜNİTELERİ • D Bağlama
(2 Products)
  • Shank - PSCShank - PSC
  • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
  • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
Ürünleri görüntüle
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [L1S] Secondary Tool Length [L1S] Secondary Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
6334572 PSC50DSSNL12 PSC50DSSNL12 52.0000 2.047 60.3000 2.374 35.0000 1.378 110.0000 4.330 SN..120408/SN..432 0.81
    Liste fiyatı:
    $372.29 /her biri
    Fiyatınız::
    6334573 PSC50DSSNR15 PSC50DSSNR15 50.0000 1.968 60.2000 2.370 35.0000 1.378 125.0000 4.921 SN..150612/SN..543 0.89
      Liste fiyatı:
      $372.29 /her biri
      Fiyatınız::
      Liste fiyatı:
      İndirim: %
      Fiyatınız::
      Değiştirme Bu ürün mevcut değil
      Yeni Ürün Bu ürün bir distribütör üzerinden temin edilebilir

      ORİJİNAL ÜRÜN

      DCLN 95° DCLN 95°

      Kesme ÜNİTELERİ • D Bağlama
      (6 Products)
      • Shank - PSCShank - PSC
      • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
      • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
      Ürünleri görüntüle
      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
      6319656 PSC50DCLNL12 PSC50DCLNL12 60.0000 2.362 35.0000 1.378 110.0000 4.330 CN..120408/CN..432 0.92
        Liste fiyatı:
        $372.29 /her biri
        Fiyatınız::
        6319657 PSC50DCLNL16 PSC50DCLNL16 60.0000 2.362 35.0000 1.378 125.0000 4.921 CN..160612/CN..543 0.94
          Liste fiyatı:
          $372.29 /her biri
          Fiyatınız::
          6319658 PSC50DCLNL19 PSC50DCLNL19 60.0000 2.362 35.0000 1.378 125.0000 4.921 CN..190612/CN..643 0.91
            Liste fiyatı:
            $372.29 /her biri
            Fiyatınız::
            6319659 PSC50DCLNR12 PSC50DCLNR12 60.0000 2.362 35.0000 1.378 110.0000 4.330 CN..120408/CN..432 0.80
              Liste fiyatı:
              $372.29 /her biri
              Fiyatınız::
              6319660 PSC50DCLNR16 PSC50DCLNR16 60.0000 2.362 35.0000 1.378 125.0000 4.921 CN..160612/CN..543 0.94
                Liste fiyatı:
                $372.29 /her biri
                Fiyatınız::
                6319691 PSC50DCLNR19 PSC50DCLNR19 60.0000 2.362 35.0000 1.378 125.0000 4.921 CN..190612/CN..643 0.91
                  Liste fiyatı:
                  $372.29 /her biri
                  Fiyatınız::
                  Liste fiyatı:
                  İndirim: %
                  Fiyatınız::
                  Değiştirme Bu ürün mevcut değil
                  Yeni Ürün Bu ürün bir distribütör üzerinden temin edilebilir

                  ORİJİNAL ÜRÜN

                  DCRN 75° DCRN 75°

                  Kesme ÜNİTELERİ • D Bağlama
                  (2 Products)
                  • Shank - PSCShank - PSC
                  • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                  • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                  Ürünleri görüntüle
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms
                  6319692 PSC50DCRNL12 PSC50DCRNL12 60.0000 2.362 27.0000 1.063 CN..120408/CN..432 0.92
                    Liste fiyatı:
                    $372.29 /her biri
                    Fiyatınız::
                    6319693 PSC50DCRNR12 PSC50DCRNR12 60.0000 2.362 27.0000 1.063 CN..120408/CN..432 0.81
                      Liste fiyatı:
                      $372.29 /her biri
                      Fiyatınız::
                      Liste fiyatı:
                      İndirim: %
                      Fiyatınız::
                      Değiştirme Bu ürün mevcut değil
                      Yeni Ürün Bu ürün bir distribütör üzerinden temin edilebilir

                      ORİJİNAL ÜRÜN

                      DDJN 93° DDJN 93°

                      Kesme ÜNİTELERİ • D Bağlama
                      (6 Products)
                      • Shank - PSCShank - PSC
                      • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                      • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                      Ürünleri görüntüle
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                      6319735 PSC50DDJNL11 PSC50DDJNL11 60.0000 2.362 35.0000 1.378 65.0000 2.559 DN..110408/DN..332 0.85
                        Liste fiyatı:
                        $372.29 /her biri
                        Fiyatınız::
                        6319737 PSC50DDJNL1504 PSC50DDJNL1504 60.0000 2.362 35.0000 1.378 110.0000 4.330 DN..150408/DN..432 0.70
                          Liste fiyatı:
                          $372.29 /her biri
                          Fiyatınız::
                          6319736 PSC50DDJNL1506 PSC50DDJNL1506 60.0000 2.362 35.0000 1.378 110.0000 4.330 DN..150608/DN..442 0.87
                            Liste fiyatı:
                            $372.29 /her biri
                            Fiyatınız::
                            6319738 PSC50DDJNR11 PSC50DDJNR11 60.0000 2.362 35.0000 1.378 65.0000 2.559 DN..110408/DN..332 0.85
                              Liste fiyatı:
                              $372.29 /her biri
                              Fiyatınız::
                              6319740 PSC50DDJNR1504 PSC50DDJNR1504 60.0000 2.362 35.0000 1.378 110.0000 4.330 DN..150408/DN..432 0.70
                                Liste fiyatı:
                                $372.29 /her biri
                                Fiyatınız::
                                6319739 PSC50DDJNR1506 PSC50DDJNR1506 60.0000 2.362 35.0000 1.378 110.0000 4.330 DN..150608/DN..442 0.87
                                  Liste fiyatı:
                                  $372.29 /her biri
                                  Fiyatınız::
                                  Liste fiyatı:
                                  İndirim: %
                                  Fiyatınız::
                                  Değiştirme Bu ürün mevcut değil
                                  Yeni Ürün Bu ürün bir distribütör üzerinden temin edilebilir

                                  ORİJİNAL ÜRÜN

                                  DDUN 93° DDUN 93°

                                  Kesme ÜNİTELERİ • D Bağlama
                                  (2 Products)
                                  • Shank - PSCShank - PSC
                                  • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                                  • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                  Ürünleri görüntüle
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                                  6319741 PSC50DDUNL1506 PSC50DDUNL1506 60.0000 2.362 35.0000 1.378 110.0000 4.330 DN..150608/DN..442 1.01
                                    Liste fiyatı:
                                    $372.29 /her biri
                                    Fiyatınız::
                                    6319743 PSC50DDUNR1506 PSC50DDUNR1506 60.0000 2.362 35.0000 1.378 110.0000 4.330 DN..150608/DN..442 1.01
                                      Liste fiyatı:
                                      $372.29 /her biri
                                      Fiyatınız::
                                      Liste fiyatı:
                                      İndirim: %
                                      Fiyatınız::
                                      Değiştirme Bu ürün mevcut değil
                                      Yeni Ürün Bu ürün bir distribütör üzerinden temin edilebilir

                                      ORİJİNAL ÜRÜN

                                      DRSN DRSN

                                      Kesme ÜNİTELERİ • D Bağlama
                                      (2 Products)
                                      • Shank - PSCShank - PSC
                                      • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                                      • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                      Ürünleri görüntüle
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
                                      6319615 PSC50DRSNL12 PSC50DRSNL12 60.0000 2.362 35.0000 1.378 110.0000 4.330 RN..120400/RN..43 0.87
                                        Liste fiyatı:
                                        $372.29 /her biri
                                        Fiyatınız::
                                        6319616 PSC50DRSNR12 PSC50DRSNR12 60.0000 2.362 35.0000 1.378 110.0000 4.330 RN..1204002/RN..43 0.87
                                          Liste fiyatı:
                                          $372.29 /her biri
                                          Fiyatınız::
                                          Liste fiyatı:
                                          İndirim: %
                                          Fiyatınız::
                                          Değiştirme Bu ürün mevcut değil
                                          Yeni Ürün Bu ürün bir distribütör üzerinden temin edilebilir

                                          ORİJİNAL ÜRÜN

                                          DSRN 75° DSRN 75°

                                          Kesme ÜNİTELERİ • D Bağlama
                                          (2 Products)
                                          • Shank - PSCShank - PSC
                                          • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                                          • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                          Ürünleri görüntüle
                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms
                                          6334520 PSC50DSRNR12 PSC50DSRNR12 60.0000 2.362 27.0000 1.063 SN..120408/SN..432 0.89
                                            Liste fiyatı:
                                            $372.29 /her biri
                                            Fiyatınız::
                                            6334571 PSC50DSRNR15 PSC50DSRNR15 60.0000 2.362 27.0000 1.063 SN..150612/SN..543 0.82
                                              Liste fiyatı:
                                              $372.29 /her biri
                                              Fiyatınız::
                                              Liste fiyatı:
                                              İndirim: %
                                              Fiyatınız::
                                              Değiştirme Bu ürün mevcut değil
                                              Yeni Ürün Bu ürün bir distribütör üzerinden temin edilebilir

                                              ORİJİNAL ÜRÜN

                                              DVVN 72° 30' DVVN 72° 30'

                                              Kesme ÜNİTELERİ • D Bağlama
                                              (1 Products)
                                              • Shank - PSCShank - PSC
                                              • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
                                              • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                              Ürünleri görüntüle
                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms
                                              6319801 PSC50DVVNN16 PSC50DVVNN16 65.0000 2.559 0.0000 .0000 VN..160408/VN..332 0.79
                                                Liste fiyatı:
                                                $372.29 /her biri
                                                Fiyatınız::
                                                Liste fiyatı:
                                                İndirim: %
                                                Fiyatınız::
                                                Değiştirme Bu ürün mevcut değil
                                                Yeni Ürün Bu ürün bir distribütör üzerinden temin edilebilir

                                                ORİJİNAL ÜRÜN

                                                DVJN 93°