successfully added to cart
View Cart
M-Clamping
M-Clamping
M-Clamping
M-Clamping

MDJN 93°

M-Clamping

Uses and application

  • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (4)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (4)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (4)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (4)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (4)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (4)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (4)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (4)
  • M Stainless Steel (4)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (4)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (4)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (4)
  • K Cast Iron (4)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (4)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (4)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (4)
  • N Non-Ferrous Materials (4)
    • N1
      Wrought Aluminum
      (4)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (4)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (4)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (4)
    • N6
      Carbon, Graphite Composites, CFRP
      (4)
    • N7
      MMC's
      (4)
  • S High-Temp Alloys (4)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (4)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (4)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (4)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (4)
  • H Hardened Materials (4)
    • H1
      Hardened Materials 44-48 HRC
      (4)
    • H2
      Hardened Materials 48-55 HRC
      (4)
    • H3
      Hardened Materials 56-60 HRC
      (4)
    • H4
      Hardened Materials >60 HRC
      (4)
Applications
  • Multiple Direction Cutting Multiple Direction Cutting (4)
  • Profiling Profiling (4)
  • Turning Turning (4)
Cutting Condition
  • Heavily Interrupted Cut (4)
  • Interrupted (4)
  • Lightly Interrupted Cut (4)
  • Smooth Cut (4)
  • Varying Depth of Cut (4)
Cutting Edges Per Insert
  • 1.0 (4)
  • 2.0 (4)
  • 4.0 (4)
to
cornerConfiguration
Corner Radius
  • 0.1 (2)
  • 0.102 (4)
  • 0.2 (2)
  • 0.203 (2)
  • 0.34 (2)
  • 0.397 (4)
  • 0.4 (4)
  • 0.406 (4)
  • 0.792 (2)
  • 0.794 (4)
  • 0.8 (4)
  • 1.191 (4)
  • 1.2 (4)
  • 1.588 (2)
  • 1.6 (4)
  • 2.381 (2)
to
Corner Radius
  • 0.004 (4)
  • 0.008 (2)
  • 0.013 (2)
  • 0.0156 (4)
  • 0.016 (4)
  • 0.031 (4)
  • 0.0312 (4)
  • 0.0313 (4)
  • 0.0469 (4)
  • 0.047 (4)
  • 0.0625 (4)
  • 0.063 (2)
  • 0.0938 (2)
  • 0.312 (2)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (4)
  • CL4 (2)
  • CM2 (4)
  • CM3 (2)
  • CPX (4)
  • CW2 (2)
  • CW2015 (4)
  • CW5025 (4)
  • HK1500 (2)
  • HT2 (2)
  • K060 (2)
  • K090 (4)
  • K10M (4)
  • K10P (4)
  • K10U (4)
  • K15U (4)
  • K20K (4)
  • K25M (4)
  • K25P (4)
  • K313 (4)
  • K35P (4)
  • K420 (2)
  • K45 (2)
  • K68 (4)
  • KB1345 (2)
  • KB1610 (2)
  • KB1625 (2)
  • KB1630 (2)
  • KB5610 (2)
  • KB5625 (2)
  • KB5630 (2)
  • KB9610 (4)
  • KBH10 (4)
  • KBH10B (4)
  • KBH20 (4)
  • KBH20B (4)
  • KC210 (4)
  • KC250 (2)
  • KC5010 (4)
  • KC5025 (4)
  • KC5410 (4)
  • KC5510 (4)
  • KC5525 (4)
  • KC720 (2)
  • KC730 (2)
  • KC7310 (4)
  • KC732 (2)
  • KC8050 (4)
  • KC810 (4)
  • KC850 (4)
  • KC9010 (4)
  • KC9025 (4)
  • KC910 (4)
  • KC9105 (4)
  • KC9110 (4)
  • KC9120 (4)
  • KC9125 (4)
  • KC9140 (4)
  • KC9145 (4)
  • KC9210 (2)
  • KC9215 (4)
  • KC9225 (4)
  • KC9240 (4)
  • KC9240NEW (4)
  • KC9245 (4)
  • KC9315 (4)
  • KC9320 (4)
  • KC9325 (4)
  • KC935 (4)
  • KC950 (4)
  • KC990 (4)
  • KCD25 (2)
  • KCK05 (4)
  • KCK05B (4)
  • KCK15 (4)
  • KCK15B (4)
  • KCK20 (4)
  • KCK20B (4)
  • KCM15 (4)
  • KCM15B (4)
  • KCM25 (4)
  • KCM25B (4)
  • KCM35 (4)
  • KCM35B (2)
  • KCP05 (4)
  • KCP05B (4)
  • KCP10 (4)
  • KCP10B (4)
  • KCP25 (4)
  • KCP25B (4)
  • KCP30 (4)
  • KCP30B (4)
  • KCP40 (4)
  • KCP40B (4)
  • KCPK05 (4)
  • KCS10B (4)
  • KCU10 (4)
  • KCU25 (4)
  • KD050 (2)
  • KD081 (2)
  • KD100 (2)
  • KD120 (2)
  • KD1400 (2)
  • KD1405 (2)
  • KD1425 (2)
  • KT125 (4)
  • KT150 (2)
  • KT175 (4)
  • KT315 (4)
  • KT325 (2)
  • KTP10 (2)
  • KU10T (4)
  • KU30T (4)
  • KY1310 (2)
  • KY1320 (4)
  • KY1540 (2)
  • KY1615 (4)
  • KY2000 (2)
  • KY2100 (2)
  • KY3000 (4)
  • KY3400 (2)
  • KY3500 (4)
  • KY4300 (2)
  • KY4400 (4)
  • KYHK15B (4)
  • KYK10 (2)
  • KYK25 (2)
  • KYK35 (4)
  • KYS25 (2)
  • KYS30 (2)
  • NL200 (2)
  • NL250 (4)
  • NL300 (2)
  • NL920 (4)
  • PS5 (2)
  • SP0819 (2)
  • SP4019 (2)
  • THM (2)
  • TN10P (4)
  • TN10U (4)
  • TN15M (4)
  • TN15U (4)
  • TN2000 (2)
  • TN20K (4)
  • TN20P (4)
  • TN30M (4)
  • TN30P (4)
  • TN4000 (2)
  • TN5015 (2)
  • TN5020 (2)
  • TN5105 (4)
  • TN5120 (4)
  • TN6010 (4)
  • TN6025 (2)
  • TN7005 (4)
  • TN7010 (4)
  • TN7015 (4)
  • TN7025 (4)
  • TN7035 (2)
  • TN7105 (2)
  • TN7110 (2)
  • TN7115 (4)
  • TN7125 (2)
  • TN7135 (2)
  • TN8025 (4)
  • TTI15 (2)
  • TTS (2)
  • TTX (2)
  • WBH10C (4)
  • WBH10P (2)
  • WBH10U (2)
  • WBH20P (4)
  • WBH25P (2)
  • WBH25U (4)
  • WBH30P (2)
  • WBK45U (4)
  • WDN00U (2)
  • WDN25U (2)
  • WK05CT (4)
  • WK15CT (2)
  • WK20CT (4)
  • WM15CT (4)
  • WM25CT (4)
  • WM35CT (4)
  • WP15CT (4)
  • WP25CT (4)
  • WP35CT (4)
  • WS10PT (4)
  • WS25PT (4)
  • WU10HT (4)
  • WU10PT (2)
  • WU25PT (2)
Hand Of Tool
  • L (2)
  • R (2)
Wiper Insert
  • N (4)
  • Y (4)
insertGeometry
Cutting Tool Material
  • B H (4)
  • B L (4)
  • C A (4)
  • C N (4)
  • D P (4)
  • H T (4)
  • H W (4)
other
Cutting Condition Material
  • H-All (4)
  • K-All (4)
  • M-All (4)
  • N-All (4)
  • P-All (4)
  • S-All (4)
  • S2 (4)
  • S4 (2)
Over All Length [L]
  • 2.7559 (2)
  • 2.756 (2)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 4 of 4 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
3662541 KM80TSMDJNL1504 KM80TSMDJNL1504 70.0000 2.755 53.0000 2.086 DN..150408/DN..432 1.85 4.07
    List price:
    $513.81 /each.
    Your price::
    Qty
    3662542 KM80TSMDJNR1504 KM80TSMDJNR1504 70.0000 2.756 53.0000 2.087 DN..150408/DN..432 1.86 4.10
      List price:
      $513.81 /each.
      Your price::
      Qty
      3662563 KM80TSMDJNL1506 KM80TSMDJNL1506 70.0000 2.755 53.0000 2.086 DN..150608/DN.442 1.84 4.06
        List price:
        $513.81 /each.
        Your price::
        Qty
        3662564 KM80TSMDJNR1506 KM80TSMDJNR1506 70.0000 2.756 53.0000 2.087 DN..150608/DN.442 1.84 4.06
          List price:
          $513.81 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty

          Sold in pkg. of

          product-image
          Please adjust the following properties from

          ISO Katalog

          ANSI Katalog

          to find similar products.
          If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
          You are about to create a duplicate . Do you want to proceed?
          You are about to delete Do you want to proceed?
          What would you like to rename your to?
          Please enter a valid name
          Please enter a name for the duplicate
          Please enter a valid name
          You are about to add to your My Solutions page. Do you want to proceed?
          Please enter a valid name
          Send a copy of

          Please enter a valid Email
          Please enter a valid name

          We have found the following CAD Drawings

          Select the files you are looking for and download them all at once

          You should be logged to see your dashboard information
          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
          item(s) successfully added to the cart
          View Cart