RNGJ-ML
3/4″ • Inserts • RNGJ64…
Features and benefits
- -ML geometry is the first choice for stainless steel and high-temp alloys.
Filters and Columns
Filters
Filters
View filters in
Metric
Inch
Werkstoff des Werkstücks
Werkstoff des Werkstücks
-
P Stahl (3)
-
P0Kohlenstoffarme Stähle, langspanend C < .25%; <125 HB; <530 N/mm^2 UTS (3)
-
P1Kohlenstoffarme Stähle, kurzspanend C < .25%; <125 HB; <530 N/mm^2 UTS (3)
-
P2Stähle mit mittlerem und hohem Kohlenstoffgehalt C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (3)
-
P3Legierter Stahl/Werkzeugstahl C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (3)
-
P4Legierter Stahl/Werkzeugstahl C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (3)
-
P5Ferritische, martensitische und Rostfreie PH-Stähle <330 HB; <35 HRC; 600-900 N/mm^2 UTS (3)
-
P6Hochfeste ferritische, martensitische und PH-Edelstähle 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (3)
-
-
M Rostfreier Stahl (3)
-
M1Austenitischer, Rostfreier Stahl 130-200 HB; <600 N/mm^2 UTS (3)
-
M2Hochfeste austenitische, rostfreie Stähle und Edelstahlguss 150-230 HB; <25 HRC; >600 N/mm^2 UTS (3)
-
M3Duplex-Edelstahl 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (3)
-
-
K Gusseisen (1)
-
K1Grauguss 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (1)
-
K2GGV- und Sphäroguss mit niedriger bis mittlerer Festigkeit 130-260 HB; <28 HRC; <600 N/mm^2 UTS (1)
-
K3Hochfestes und zwischenstufenvergütetes duktiles Gusseisen 180-350 HB; <43 HRC; >600 N/mm^2 UTS (1)
-
-
S Hochwarmfeste Legierungen (3)
-
S1Warmfeste Legierungen auf Eisenbasis 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (3)
-
S2Warmfeste Legierungen auf Kobaltbasis 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (3)
-
S3Warmfeste Legierungen auf Nickelbasis 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (3)
-
S4Titan und Titanlegierungen 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (3)
-
-
H Gehärtete Werkstoffe (1)
-
H1Gehärtete Werkstoffe 44-48 HRC (1)
-
application
Schneidstoffsorte
Schneidstoffsorte
-
WP25PM (1)
-
WP40PM (1)
-
WU35PM (1)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1-
3
of
3 results
Metric
Inch
Show
Metric
Inch
| SAP-Materialnummer | ISO Katalognummer | ANSI Katalognummer | Sorte | Mittlere Spandicke [HM] | Mittlere Spandicke [HM] | Wendeschneidplatte Anzahl der Schneidkanten | [S] Dicke der Wendeschneidplatte | [S] Dicke der Wendeschneidplatte | [D] Wendeschneidplatten-Größe (Inkreis) | [D] Wendeschneidplatten-Größe (Inkreis) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6010142 | RNGJ190600EML | RNGJ64EML | WP40PM | 0.02 | .0008 | 12 | 6.35 | .25 | 19.05 | .75 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$27.02
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6010120 | RNGJ190600EML | RNGJ64EML | WP25PM | 0.02 | .0008 | 12 | 6.35 | .25 | 19.05 | .75 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$25.98
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6010141 | RNGJ190600EML | RNGJ64EML | WU35PM | 0.02 | .0008 | 12 | 6.35 | .25 | 19.05 | .75 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$25.98
/each
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
Discount: %
Replacement
This item is no longer available
Replacement Product Please contact customer service for assistance
Replacement Product Please contact customer service for assistance
Qty
Sold in pkg. of
Insert Selection Guide • M200™ Series • Large IC Expansion
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | .E..ML | WP25PM | .S..MM | WP40PM | .S..MM | WP40PM |
| P3–P4 | .E..ML | WP25PM | .S..MM | WP40PM | .S..MM | WP40PM |
| P5–P6 | .E..ML | WP25PM | .S..MM | WP35CM | .S..MM | WP35CM |
| M1–M2 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| M3 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| K1–K2 | – | – | .S..MM | WK15CM | – | – |
| K3 | – | – | .S..MM | WK15CM | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| S3 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| S4 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| H1 | – | – | .S..MM | WP25PM | – | – |
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .003 | .009 | .016 | .003 | .007 | .012 | .002 | .006 | .010 | .002 | .006 | .010 | .002 | .005 | .009 | .E..ML |
| .S..MM | .007 | .015 | .027 | .005 | .011 | .020 | .005 | .010 | .017 | .004 | .009 | .016 | .004 | .009 | .016 | .S..MM |
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .004 | .011 | .020 | .003 | .008 | .015 | .003 | .007 | .013 | .003 | .007 | .012 | .003 | .007 | .012 | .E..ML |
| .S..MM | .009 | .019 | .034 | .006 | .014 | .025 | .006 | .012 | .021 | .005 | .011 | .020 | .005 | .011 | .020 | .S..MM |
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .008 | .021 | .037 | .006 | .016 | .027 | .005 | .014 | .023 | .005 | .013 | .022 | .005 | .012 | .021 | .E..ML |
| .S..MM | .016 | .035 | .065 | .012 | .025 | .046 | .010 | .022 | .040 | .010 | .020 | .037 | .009 | .020 | .036 | .S..MM |
| Light
|
General
|
Heavy
|
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .006 | .015 | .027 | .004 | .011 | .020 | .004 | .010 | .017 | .004 | .009 | .016 | .003 | .009 | .016 | .E..ML |
| .S..MM | .012 | .025 | .046 | .009 | .018 | .033 | .007 | .016 | .029 | .007 | .015 | .027 | .007 | .015 | .026 | .S..MM |
Recommended Starting Speeds [SFM]
| Material Group | WK15CM | WP25PM | WU35PM | WP35CM | WP40PM | |||||||||||
| P | 1 | – | – | – | 1295 | 1120 | 1060 | 1025 | 905 | 845 | 1790 | 1555 | 1460 | 1165 | 1025 | 965 |
| 2 | – | – | – | 1080 | 940 | 785 | 865 | 750 | 630 | 1105 | 1000 | 905 | 985 | 845 | 710 | |
| 3 | – | – | – | 1000 | 845 | 690 | 785 | 670 | 550 | 1000 | 905 | 805 | 905 | 770 | 630 | |
| 4 | – | – | – | 890 | 725 | 590 | 710 | 590 | 475 | 750 | 690 | 630 | 805 | 670 | 535 | |
| 5 | – | – | – | 725 | 670 | 590 | 590 | 535 | 475 | 1025 | 905 | 830 | 670 | 610 | 535 | |
| 6 | – | – | – | 650 | 490 | 395 | 510 | 395 | 310 | 630 | 535 | 430 | 590 | 450 | 355 | |
| M | 1 | – | – | – | 805 | 710 | 650 | 670 | 590 | 535 | 805 | 725 | 610 | 770 | 670 | 610 |
| 2 | – | – | – | 725 | 630 | 510 | 610 | 510 | 430 | 725 | 630 | 550 | 690 | 590 | 490 | |
| 3 | – | – | – | 550 | 475 | 370 | 450 | 395 | 310 | 570 | 510 | 450 | 510 | 450 | 355 | |
| K | 1 | 1655 | 1520 | 1340 | 905 | 805 | 725 | – | – | – | 1165 | 1045 | 940 | – | – | – |
| 2 | 1320 | 1165 | 1080 | 710 | 630 | 590 | – | – | – | 925 | 830 | 750 | – | – | – | |
| 3 | 1105 | 985 | 905 | 590 | 535 | 475 | – | – | – | 770 | 690 | 630 | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 155 | 140 | 95 | 140 | 120 | 95 | – | – | – | 155 | 140 | 120 |
| 2 | – | – | – | 155 | 140 | 95 | 140 | 120 | 95 | – | – | – | 155 | 140 | 120 | |
| 3 | – | – | – | 200 | 155 | 95 | 180 | 140 | 95 | – | – | – | 200 | 155 | 120 | |
| 4 | – | – | – | 275 | 200 | 140 | 235 | 180 | 120 | 260 | 200 | 130 | 260 | 200 | 140 | |
| H | 1 | – | – | – | 475 | 355 | 275 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |