VSM890-12 Series - Tool Bodies

Filter auswählen
Filter
Filter anzeigen in
Metric
Inch
keyFilters
Werkstoff des Werkstücks
Werkstoff des Werkstücks
  • P Stahl (44)
    • P0
      Kohlenstoffarme Stähle, langspanend C < .25%; <125 HB; <530 N/mm^2 UTS (44)
    • P1
      Kohlenstoffarme Stähle, kurzspanend C < .25%; <125 HB; <530 N/mm^2 UTS (44)
    • P2
      Stähle mit mittlerem und hohem Kohlenstoffgehalt C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (44)
    • P3
      Legierter Stahl/Werkzeugstahl C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (44)
    • P4
      Legierter Stahl/Werkzeugstahl C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (44)
    • P5
      Ferritische, martensitische und Rostfreie PH-Stähle <330 HB; <35 HRC; 600-900 N/mm^2 UTS (44)
    • P6
      Hochfeste ferritische, martensitische und PH-Edelstähle 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (44)
  • M Rostfreier Stahl (44)
    • M1
      Austenitischer, Rostfreier Stahl 130-200 HB; <600 N/mm^2 UTS (44)
    • M2
      Hochfeste austenitische, rostfreie Stähle und Edelstahlguss 150-230 HB; <25 HRC; >600 N/mm^2 UTS (44)
    • M3
      Duplex-Edelstahl 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (44)
  • K Gusseisen (44)
    • K1
      Grauguss 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (44)
    • K2
      GGV- und Sphäroguss mit niedriger bis mittlerer Festigkeit 130-260 HB; <28 HRC; <600 N/mm^2 UTS (44)
    • K3
      Hochfestes und zwischenstufenvergütetes duktiles Gusseisen 180-350 HB; <43 HRC; >600 N/mm^2 UTS (44)
  • N Buntmetalle (44)
    • N1
      Geschmiedetes Aluminium (44)
    • N2
      Aluminiumlegierungen mit geringem Siliziumgehalt und Magnesiumlegierungen Si <12,2 % (44)
    • N3
      Aluminiumlegierungen mit hohem Siliziumgehalt Si >12,2% (44)
  • S Hochwarmfeste Legierungen (44)
    • S1
      Warmfeste Legierungen auf Eisenbasis 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (44)
    • S2
      Warmfeste Legierungen auf Kobaltbasis 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (44)
    • S3
      Warmfeste Legierungen auf Nickelbasis 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (44)
    • S4
      Titan und Titanlegierungen 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (44)
  • H Gehärtete Werkstoffe (44)
    • H1
      Gehärtete Werkstoffe 44-48 HRC (44)
Select All Star
  • CN (8)
  • DE (11)
  • GB (3)
  • IN (9)
  • SG (10)
  • US (10)
Anwendungen
Anwendungen
  • Face Milling Face Milling (44)
  • Pocket Milling Pocket Milling (44)
  • Pocket Plunge Milling Pocket Plunge Milling (44)
  • Shoulder Milling Shoulder Milling (44)
  • Shoulder Roughing Shoulder Roughing (44)
  • Shoulder Square End Shoulder Square End (44)
  • Slot Milling Slot Milling (44)
  • Slot Square End Slot Square End (44)
Dreh-Durchmesser
Dreh-Durchmesser
  • 1.25 in (1)
  • 1.26 in (1)
  • 1.5 in (1)
  • 1.575 in (1)
  • 1.969 in (2)
  • 2.0 in (2)
  • 2.48 in (2)
  • 2.5 in (2)
  • 3.0 in (3)
  • 3.15 in (3)
  • 3.938 in (3)
  • 4.0 in (3)
  • 4.921 in (3)
  • 5.0 in (3)
  • 6.0 in (3)
  • 6.299 in (3)
  • 7.875 in (3)
  • 8.0 in (3)
  • 9.843 in (1)
  • 10.0 in (1)
Dreh-Durchmesser Min bis Dreh-Durchmesser Max
Dreh-Durchmesser
Dreh-Durchmesser
  • 31.75 mm (1)
  • 32.0 mm (1)
  • 38.1 mm (1)
  • 40.0 mm (1)
  • 50.0 mm (2)
  • 50.801 mm (2)
  • 63.0 mm (2)
  • 63.5 mm (2)
  • 76.2 mm (3)
  • 80.0 mm (3)
  • 100.0 mm (3)
  • 101.601 mm (3)
  • 125.0 mm (3)
  • 127.0 mm (3)
  • 152.4 mm (3)
  • 160.0 mm (3)
  • 200.0 mm (3)
  • 203.201 mm (3)
  • 250.0 mm (1)
  • 254.0 mm (1)
Dreh-Durchmesser Min bis Dreh-Durchmesser Max
Reach
Reach
  • 1.26 in (1)
  • 1.575 in (9)
  • 1.75 in (3)
  • 1.969 in (6)
  • 2.0 in (3)
  • 2.25 in (2)
  • 2.38 in (10)
  • 2.48 in (10)
Reach Min bis Reach Max
Reach
Reach
  • 32.0 mm (1)
  • 40.0 mm (9)
  • 44.45 mm (3)
  • 50.0 mm (6)
  • 50.801 mm (3)
  • 57.151 mm (2)
  • 60.45 mm (10)
  • 63.0 mm (10)
Reach Min bis Reach Max
Anschlussart
Anschlussart
  • A-Socket Head Cap Screw (29)
  • C-Bolt Circle (11)
  • KL Screw (1)
  • Weldon (3)
Anzahl der Spannuten
Anzahl der Spannuten
  • 10 (4)
  • 11 (2)
  • 12 (2)
  • 14 (4)
  • 16 (4)
  • 22 (2)
  • 3 (2)
  • 4 (4)
  • 5 (6)
  • 6 (2)
  • 7 (6)
  • 8 (4)
  • 9 (2)
Gesamtlänge [L]
Gesamtlänge [L]
  • 1.575 in (9)
  • 1.75 in (3)
  • 1.969 in (6)
  • 2.0 in (3)
  • 2.38 in (10)
  • 2.48 in (10)
  • 3.504 in (1)
  • 4.53 in (2)
Gesamtlänge [L] Min bis Gesamtlänge [L] Max
Gesamtlänge [L]
Gesamtlänge [L]
  • 40.0 mm (9)
  • 44.45 mm (3)
  • 50.0 mm (6)
  • 50.801 mm (3)
  • 60.45 mm (10)
  • 63.0 mm (10)
  • 89.0 mm (1)
  • 115.051 mm (2)
Gesamtlänge [L] Min bis Gesamtlänge [L] Max
cornerConfiguration
Eckenradius
Eckenradius
  • 0.031 in (44)
  • 0.063 in (44)
Eckenradius Min bis Eckenradius Max
Eckenradius
Eckenradius
  • 0.8 mm (44)
  • 1.6 mm (44)
Eckenradius Min bis Eckenradius Max
application
Schneidstoffsorte
Schneidstoffsorte
  • WK15CM (44)
  • WN25PM (44)
  • WP25PM (44)
  • WP35CM (44)
  • WP40PM (44)
  • WS40PM (44)
  • WU10PM (44)
frontEnd
Halsdurchmesser
Halsdurchmesser
  • 0.984 in (1)
  • 1.161 in (1)
  • 1.303 in (1)
Halsdurchmesser Min bis Halsdurchmesser Max
Halsdurchmesser
Halsdurchmesser
  • 25.0 mm (1)
  • 29.5 mm (1)
  • 33.1 mm (1)
Halsdurchmesser Min bis Halsdurchmesser Max
backEnd
Aufnahmeart
Aufnahmeart
  • CYLINDRICAL (3)
  • SHELL MILL (41)
Hinterer Durchmesser
Hinterer Durchmesser
  • 19.05 mm (4)
  • 22.0 mm (5)
  • 25.0 mm (1)
  • 25.401 mm (5)
  • 27.0 mm (3)
  • 32.0 mm (3)
  • 38.1 mm (6)
  • 40.0 mm (6)
  • 50.801 mm (3)
  • 60.0 mm (4)
  • 63.5 mm (4)
Hinterer Durchmesser Min bis Hinterer Durchmesser Max
Hinterer Durchmesser
Hinterer Durchmesser
  • 0.75 in (4)
  • 0.866 in (5)
  • 0.984 in (1)
  • 1.0 in (5)
  • 1.063 in (3)
  • 1.26 in (3)
  • 1.5 in (6)
  • 1.575 in (6)
  • 2.0 in (3)
  • 2.362 in (4)
  • 2.5 in (4)
Hinterer Durchmesser Min bis Hinterer Durchmesser Max
No filters matching ""
Sie sind im Begriff, zu Ihrer MySolutions-Seite hinzuzufügen.. Möchten Sie fortfahren?
product-image
Please adjust the following properties from

ISO Katalog

ANSI Katalog

to find similar products.

The following files are available

Please select a file to download

Models

Sie sollten angemeldet sein, um Ihre Dashboard-Informationen zu sehen
Session expired due to inactivity, please login again
Das/die Produkt/e (), das/die Sie dem Warenkorb hinzufügen wollten, ist/sind nicht verfügbar. Bitte wenden Sie sich an den Kundendienst.
Artikel erfolgreich zum Warenkorb hinzugefügt
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Katalog Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?