Deutsch
No Items in Cart
COVID-19: Wie WIDIA reagiert
Hydrodehnspannfutter - Standard Line
Hydrodehnspannfutter - Standard Line
Hydrodehnspannfutter - Standard Line
Hydrodehnspannfutter - Standard Line

KM50TS™ Werkzeugaufnahmen

Hydrodehnspannfutter - Standard Line

Metric
Inch
SAP Material Number 4007728
ISO Catalog Number KM50TSHC16080M
ANSI Catalog Number KM50TSHC16080M
[D1] Adapter / Shank / Bore Diameter 16.0000
[D1] Adapter / Shank / Bore Diameter .6299
[D2] Body Diameter 1 Workpiece Side 37.6000
[D2] Body Diameter 1 Workpiece Side 1.480
[L1] Gage Length 80.0000
[L1] Gage Length 3.149
[L2] Usable Length 46.5000
[L2] Usable Length 1.830
[L9] Clamping Length 39.0000
[L9] Clamping Hole Length 1.535
[V] Adjustment Range 10.0000
[V] Adjustment Range .3937
Actuation Screw ID Drive Size 5 mm
Stop Screw ID Drive Size 3 mm
Weight Kilograms 0.83
See all Product Variants

Uses and application

  • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Axiale Verstellung –  radialAxiale Verstellung – radial
  • Gewuchtet –  G 2.5@ 15,000 min-1Gewuchtet – G 2.5@ 15,000 min-1
  • Genauigkeit –  3 μm oder wenigerGenauigkeit – 3 μm oder weniger
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum

Ersatzteile for Hydrodehnspannfutter • Standard Line

WRENCH DIN 911 SW 3
WRENCH DIN 911 SW 3
SCREW DRIVER SW5
SCREW DRIVER SW5