successfully added to cart
View Cart

M-Klemmung

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Facing Facing (28)
  • Multiple Direction Cutting Multiple Direction Cutting (28)
  • Profiling Profiling (25)
  • TRN Boring TRN Boring (27)
  • Turning Turning (42)
Workpiece Material
  • P Steel (40)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (40)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (40)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (40)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (40)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (40)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (40)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (40)
  • M Stainless Steel (40)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (40)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (40)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (40)
  • K Cast Iron (42)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (42)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (42)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (42)
  • N Non-Ferrous Materials (30)
    • N1
      Wrought Aluminum
      (30)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (30)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (10)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (30)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (30)
    • N6
      Carbon, Graphite Composites, CFRP
      (30)
    • N7
      MMC's
      (30)
  • S High-Temp Alloys (42)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (42)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (42)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (42)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (40)
  • H Hardened Materials (27)
    • H1
      Hardened Materials 44-48 HRC
      (27)
    • H2
      Hardened Materials 48-55 HRC
      (27)
    • H3
      Hardened Materials 56-60 HRC
      (27)
    • H4
      Hardened Materials >60 HRC
      (27)
Cutting Condition
  • Heavily Interrupted Cut (42)
  • Interrupted (27)
  • Lightly Interrupted Cut (42)
  • Smooth Cut (42)
  • Varying Depth of Cut (42)
Cutting Condition Material
  • H-All (27)
  • K-All (42)
  • K1 (2)
  • M-All (36)
  • N-All (30)
  • P-All (40)
  • S-All (36)
  • S2 (27)
  • S4 (8)
Tool Cutting Edge Angle
  • 45.0 (3)
  • 62.5 (1)
  • 75.0 (14)
  • 93.0 (10)
  • 95.0 (10)
  • 107.5 (4)
to
Connection Style
  • KM (27)
Cutting Edges Per Insert
  • 1.0 (23)
  • 2.0 (27)
  • 3.0 (2)
  • 4.0 (40)
  • 6.0 (2)
  • 8.0 (28)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.1 (10)
  • 0.102 (12)
  • 0.2 (10)
  • 0.203 (8)
  • 0.34 (7)
  • 0.397 (19)
  • 0.4 (21)
  • 0.406 (12)
  • 0.6 (2)
  • 0.792 (7)
  • 0.794 (19)
  • 0.8 (32)
  • 1.188 (2)
  • 1.191 (26)
  • 1.2 (32)
  • 1.588 (22)
  • 1.6 (39)
  • 2.38 (2)
  • 2.381 (15)
  • 2.4 (23)
  • 3.2 (13)
  • 4.0 (5)
to
Corner Radius
  • 0.004 (17)
  • 0.008 (10)
  • 0.013 (7)
  • 0.0156 (21)
  • 0.016 (17)
  • 0.031 (23)
  • 0.0312 (19)
  • 0.0313 (32)
  • 0.0468 (2)
  • 0.0469 (32)
  • 0.047 (27)
  • 0.0625 (39)
  • 0.063 (22)
  • 0.0928 (4)
  • 0.0938 (28)
  • 0.094 (13)
  • 0.125 (6)
  • 0.126 (7)
  • 0.1563 (2)
  • 0.1575 (5)
  • 0.312 (7)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (23)
  • CL4 (18)
  • CM2 (22)
  • CM3 (18)
  • CM4 (2)
  • CPX (25)
  • CW2 (7)
  • CW2015 (25)
  • CW3020 (2)
  • CW5025 (27)
  • GX (11)
  • HK1500 (15)
  • HT2 (7)
  • K060 (7)
  • K090 (30)
  • K1 (17)
  • K10M (30)
  • K10P (25)
  • K10U (17)
  • K15U (17)
  • K20K (30)
  • K21 (11)
  • K25M (19)
  • K25P (28)
  • K313 (30)
  • K35P (21)
  • K420 (27)
  • K45 (8)
  • K68 (28)
  • KB1340 (2)
  • KB1345 (5)
  • KB1610 (10)
  • KB1625 (8)
  • KB1630 (8)
  • KB5610 (10)
  • KB5625 (8)
  • KB5630 (8)
  • KB9610 (17)
  • KB9640 (4)
  • KBH10 (17)
  • KBH10B (15)
  • KBH20 (17)
  • KBH20B (15)
  • KBK35 (2)
  • KBK45 (2)
  • KC210 (23)
  • KC250 (18)
  • KC5010 (40)
  • KC5025 (30)
  • KC5410 (30)
  • KC5510 (30)
  • KC5525 (14)
  • KC720 (17)
  • KC730 (23)
  • KC7310 (30)
  • KC732 (12)
  • KC8050 (40)
  • KC810 (30)
  • KC850 (40)
  • KC9010 (30)
  • KC9025 (40)
  • KC910 (30)
  • KC9105 (25)
  • KC9110 (40)
  • KC9120 (40)
  • KC9125 (40)
  • KC9140 (40)
  • KC9145 (37)
  • KC9210 (7)
  • KC9215 (30)
  • KC9225 (30)
  • KC9240 (40)
  • KC9240NEW (36)
  • KC9245 (30)
  • KC9315 (30)
  • KC9320 (30)
  • KC9325 (30)
  • KC935 (34)
  • KC950 (36)
  • KC990 (36)
  • KCD25 (5)
  • KCK05 (30)
  • KCK05B (30)
  • KCK15 (30)
  • KCK15B (30)
  • KCK20 (30)
  • KCK20B (34)
  • KCM15 (30)
  • KCM15B (25)
  • KCM25 (36)
  • KCM25B (36)
  • KCM35 (30)
  • KCM35B (22)
  • KCP05 (19)
  • KCP05B (23)
  • KCP10 (40)
  • KCP10B (36)
  • KCP25 (40)
  • KCP25B (40)
  • KCP30 (40)
  • KCP30B (37)
  • KCP40 (37)
  • KCP40B (37)
  • KCPK05 (30)
  • KCS10B (30)
  • KCU10 (40)
  • KCU25 (30)
  • KD050 (8)
  • KD081 (8)
  • KD100 (8)
  • KD120 (8)
  • KD1400 (10)
  • KD1405 (8)
  • KD1425 (10)
  • KM1 (5)
  • KT1120 (3)
  • KT125 (15)
  • KT150 (8)
  • KT175 (15)
  • KT315 (17)
  • KT325 (7)
  • KT5020 (3)
  • KTP10 (5)
  • KU10T (17)
  • KU30T (30)
  • KY1310 (11)
  • KY1320 (27)
  • KY1525 (2)
  • KY1540 (13)
  • KY1615 (25)
  • KY2000 (15)
  • KY2100 (7)
  • KY3000 (30)
  • KY3400 (22)
  • KY3500 (32)
  • KY4000 (5)
  • KY4300 (15)
  • KY4400 (27)
  • KYHK15B (27)
  • KYK10 (9)
  • KYK25 (17)
  • KYK35 (32)
  • KYS25 (13)
  • KYS30 (15)
  • NL200 (7)
  • NL250 (30)
  • NL300 (30)
  • NL400 (16)
  • NL920 (18)
  • PS5 (7)
  • SP0819 (22)
  • SP3019 (15)
  • SP4019 (15)
  • SP4036 (3)
  • SP4093 (3)
  • SPADAP (21)
  • SPN4W2 (5)
  • THM (18)
  • TN10P (25)
  • TN10U (17)
  • TN15M (30)
  • TN15U (17)
  • TN2000 (20)
  • TN20K (30)
  • TN20P (30)
  • TN30M (30)
  • TN30P (31)
  • TN4000 (20)
  • TN5015 (22)
  • TN5020 (22)
  • TN5105 (14)
  • TN5120 (27)
  • TN6010 (15)
  • TN6025 (9)
  • TN7005 (14)
  • TN7010 (27)
  • TN7015 (37)
  • TN7025 (37)
  • TN7035 (22)
  • TN7105 (9)
  • TN7110 (17)
  • TN7115 (37)
  • TN7125 (32)
  • TN7135 (22)
  • TN8025 (37)
  • TTI15 (7)
  • TTM09 (5)
  • TTR-X (5)
  • TTS (18)
  • TTX (7)
  • W00342 (5)
  • WBH10C (17)
  • WBH10P (8)
  • WBH10U (10)
  • WBH20P (17)
  • WBH25P (8)
  • WBH25U (12)
  • WBH30P (8)
  • WBK40U (2)
  • WBK45U (12)
  • WDN00U (5)
  • WDN25U (10)
  • WK05CT (30)
  • WK15CT (9)
  • WK20CT (30)
  • WM15CT (30)
  • WM25CT (36)
  • WM35CT (30)
  • WP05CT (2)
  • WP15CT (40)
  • WP25CT (40)
  • WP35CT (40)
  • WS10PT (30)
  • WS25PT (30)
  • WU10HT (25)
  • WU10PT (7)
  • WU25PT (7)
Hand Of Tool
  • L (12)
  • N (3)
  • R (12)
Minimum Axial Groove Diameter
  • 4.173 (26)
  • 5.906 (1)
to
Minimum Axial Groove Diameter
  • 106.0 (26)
  • 150.0 (1)
to
Cutting Direction
  • B (8)
  • E (2)
  • S (17)
Rake Angle Style
  • DOUBLE NEGATIVE (26)
  • NEGATIVE-ZERO (1)
Maximum Bore Depth
  • 70.0 (27)
to
Maximum Bore Depth
  • 2.756 (27)
to
Boring Bar Material
  • S (10)
Wiper Insert
  • N (42)
  • Y (13)
frontEnd
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (14)
  • D-DIAMOND/RHOMBIC 55 (12)
  • S-SQUARE 90 (11)
  • V-DIAMOND/RHOMBIC 35 (3)
  • W-TRIGON 80 (2)
insertGeometry
Cutting Tool Material
  • B H (19)
  • B L (17)
  • C A (32)
  • C N (32)
  • D P (17)
  • H T (17)
  • H W (42)
backEnd
Connection Type
  • TAPER SHANK (27)
System Size
  • KM80TS (27)
other
Over All Length [L]
  • 2.7559 (13)
  • 2.756 (29)
to
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

KM80TS™ Schneidköpfe

M-Clamping
(2 Products)
  • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
3662562 KM80TSMVJNR16 KM80TSMVJNR16 70.0000 2.755 53.0000 2.086 VN..160408/VN.332 1.79 3.94
    List price:
    $501.51 /each.
    Your price::
    Qty
    3662561 KM80TSMVJNL16 KM80TSMVJNL16 70.0000 2.755 53.0000 2.086 VN..160408/VN.332 1.79 3.94
      List price:
      $501.51 /each.
      Your price::
      Qty
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty

      Sold in pkg. of

      ORIGINAL PRODUCT

      KM80TS™ Schneidköpfe

      M-Clamping
      (1 Products)
      • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
      • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
      3662594 KM80TSMVUNR16 KM80TSMVUNR16 70.0000 2.756 53.0000 2.086 106.0000 4.173 VN..160408/VN.332 2.11 4.64
        List price:
        $501.51 /each.
        Your price::
        Qty
        List price:
        Discount: %
        Your price::
        Replacement This item is not available
        Replacement Product This item may be available through a distributor
        Qty

        Sold in pkg. of

        ORIGINAL PRODUCT

        KM80TS™ Schneidköpfe

        M-Clamping
        (2 Products)
        • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
        • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
        • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
        View Products
        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
        3662577 KM80TSMSDNN19 KM80TSMSDNN19 70.0000 2.755 0.0000 .0000 SN..190512/SN.643 1.85 4.08
          List price:
          $501.51 /each.
          Your price::
          Qty
          3662578 KM80TSMSDNN25 KM80TSMSDNN25 70.0000 2.755 0.0000 .0000 SN..250924/SN.866 1.76 3.88
            List price:
            $501.51 /each.
            Your price::
            Qty
            List price:
            Discount: %
            Your price::
            Replacement This item is not available
            Replacement Product This item may be available through a distributor
            Qty

            Sold in pkg. of

            ORIGINAL PRODUCT

            KM80TS™ Schneidköpfe

            M-Clamping
            (4 Products)
            • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
            • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
            • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
            View Products
            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
            3662579 KM80TSMSKNL19 KM80TSMSKNL19 70.0000 2.756 53.0000 2.086 106.0000 4.173 SN..190512/SN.643 2.37 5.23
              List price:
              $501.51 /each.
              Your price::
              Qty
              3662581 KM80TSMSKNR19 KM80TSMSKNR19 70.0000 2.756 53.0000 2.086 106.0000 4.173 SN..190512/SN.643 2.37 5.23
                List price:
                $501.51 /each.
                Your price::
                Qty
                3662582 KM80TSMSKNR25 KM80TSMSKNR25 70.0000 2.756 53.0000 2.086 106.0000 4.173 SN..250924/SN..866 2.47 5.45
                  List price:
                  $501.51 /each.
                  Your price::
                  Qty
                  3662580 KM80TSMSKNL25 KM80TSMSKNL25 70.0000 2.756 53.0000 2.086 106.0000 4.173 SN..250924/SN..866 2.47 5.45
                    List price:
                    $501.51 /each.
                    Your price::
                    Qty
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is not available
                    Replacement Product This item may be available through a distributor
                    Qty

                    Sold in pkg. of

                    ORIGINAL PRODUCT

                    KM80TS™ Schneidköpfe

                    M-Clamping
                    (4 Products)
                    • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                    • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                    • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                    • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                    3662583 KM80TSMSRNL19 KM80TSMSRNL19 70.0000 2.755 48.0000 1.889 SN..190512/SN.643 2.12 4.67
                      List price:
                      $501.51 /each.
                      Your price::
                      Qty
                      3662584 KM80TSMSRNL25 KM80TSMSRNL25 70.0000 2.755 48.0000 1.889 SN..250924/SN.866 2.19 4.82
                        List price:
                        $501.51 /each.
                        Your price::
                        Qty
                        3662585 KM80TSMSRNR19 KM80TSMSRNR19 70.0000 2.755 48.0000 1.889 SN..190512/SN.643 2.12 4.67
                          List price:
                          $501.51 /each.
                          Your price::
                          Qty
                          3662586 KM80TSMSRNR25 KM80TSMSRNR25 70.0000 2.755 48.0000 1.889 SN..250924/SN.866 2.19 4.82
                            List price:
                            $501.51 /each.
                            Your price::
                            Qty
                            List price:
                            Discount: %
                            Your price::
                            Replacement This item is not available
                            Replacement Product This item may be available through a distributor
                            Qty

                            Sold in pkg. of

                            ORIGINAL PRODUCT

                            KM80TS™ Schneidköpfe

                            M-Clamping
                            (4 Products)
                            • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                            • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                            • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                            View Products
                            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                            3662567 KM80TSMDQNL1504 KM80TSMDQNL1504 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150408/DN..432 2.01 4.44
                              List price:
                              $513.81 /each.
                              Your price::
                              Qty
                              3662569 KM80TSMDQNL1506 KM80TSMDQNL1506 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150608/DN.442 2.01 4.43
                                List price:
                                $513.81 /each.
                                Your price::
                                Qty
                                3662570 KM80TSMDQNR1506 KM80TSMDQNR1506 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150608/DN.442 2.01 4.43
                                  List price:
                                  $513.81 /each.
                                  Your price::
                                  Qty
                                  3662568 KM80TSMDQNR1504 KM80TSMDQNR1504 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150408/DN..432 2.01 4.44
                                    List price:
                                    $513.81 /each.
                                    Your price::
                                    Qty
                                    List price:
                                    Discount: %
                                    Your price::
                                    Replacement This item is not available
                                    Replacement Product This item may be available through a distributor
                                    Qty

                                    Sold in pkg. of

                                    ORIGINAL PRODUCT

                                    KM80TS™ Schneidköpfe

                                    M-Clamping
                                    (3 Products)
                                    • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                                    • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                    • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                    • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                    View Products
                                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                    3662572 KM80TSMDUNR1504 KM80TSMDUNR1504 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150408/DN..432 2.28 5.02
                                      List price:
                                      $513.81 /each.
                                      Your price::
                                      Qty
                                      3662573 KM80TSMDUNL1506 KM80TSMDUNL1506 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150608/DN.442 2.27 5.01
                                        List price:
                                        $513.81 /each.
                                        Your price::
                                        Qty
                                        3662574 KM80TSMDUNR1506 KM80TSMDUNR1506 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150608/DN.442 2.27 5.01
                                          List price:
                                          $513.81 /each.
                                          Your price::
                                          Qty
                                          List price:
                                          Discount: %
                                          Your price::
                                          Replacement This item is not available
                                          Replacement Product This item may be available through a distributor
                                          Qty

                                          Sold in pkg. of

                                          ORIGINAL PRODUCT

                                          KM80TS™ Schneidköpfe

                                          M-Clamping
                                          (1 Products)
                                          • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                                          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                          • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                          • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                          View Products
                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                          3662566 KM80TSMDPNN1506 KM80TSMDPNN1506 70.0000 2.755 0.0000 .0000 DN..150608/DN.442 1.72 3.80
                                            List price:
                                            $513.81 /each.
                                            Your price::
                                            Qty
                                            List price:
                                            Discount: %
                                            Your price::
                                            Replacement This item is not available
                                            Replacement Product This item may be available through a distributor
                                            Qty

                                            Sold in pkg. of

                                            ORIGINAL PRODUCT

                                            KM80TS™ Schneidköpfe

                                            M-Clamping
                                            (4 Products)
                                            • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                                            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                            • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                            • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                            View Products
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                            3662541 KM80TSMDJNL1504 KM80TSMDJNL1504 70.0000 2.755 53.0000 2.086 DN..150408/DN..432 1.85 4.07
                                              List price:
                                              $513.81 /each.
                                              Your price::
                                              Qty
                                              3662542 KM80TSMDJNR1504 KM80TSMDJNR1504 70.0000 2.756 53.0000 2.087 DN..150408/DN..432 1.86 4.10
                                                List price:
                                                $513.81 /each.
                                                Your price::
                                                Qty
                                                3662563 KM80TSMDJNL1506 KM80TSMDJNL1506 70.0000 2.755 53.0000 2.086 DN..150608/DN.442 1.84 4.06
                                                  List price:
                                                  $513.81 /each.
                                                  Your price::
                                                  Qty
                                                  3662564 KM80TSMDJNR1506 KM80TSMDJNR1506 70.0000 2.756 53.0000 2.087 DN..150608/DN.442 1.84 4.06
                                                    List price:
                                                    $513.81 /each.
                                                    Your price::
                                                    Qty
                                                    List price:
                                                    Discount: %
                                                    Your price::
                                                    Replacement This item is not available
                                                    Replacement Product This item may be available through a distributor
                                                    Qty

                                                    Sold in pkg. of

                                                    ORIGINAL PRODUCT

                                                    KM80TS™ Schneidköpfe

                                                    M-Clamping
                                                    (4 Products)
                                                    • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                                                    • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                                    • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                                    • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                                    View Products
                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                    3662534 KM80TSMCRNL19 KM80TSMCRNL19 70.0000 2.756 48.0000 1.889 106.0000 4.173 CN..190612/CN..643 2.26 4.99
                                                      List price:
                                                      $513.81 /each.
                                                      Your price::
                                                      Qty
                                                      3662535 KM80TSMCRNL25 KM80TSMCRNL25 70.0000 2.756 48.0000 1.889 106.0000 4.173 CN..250924/CN..866 2.25 4.97
                                                        List price:
                                                        $513.81 /each.
                                                        Your price::
                                                        Qty
                                                        3662537 KM80TSMCRNR19 KM80TSMCRNR19 70.0000 2.755 48.0000 1.889     CN..190612/CN..643 2.26 4.99
                                                          List price:
                                                          $513.81 /each.
                                                          Your price::
                                                          Qty
                                                          3662538 KM80TSMCRNR25 KM80TSMCRNR25 70.0000 2.755 48.0000 1.889     CN..250924/CN..866 2.25 4.97
                                                            List price:
                                                            $513.81 /each.
                                                            Your price::
                                                            Qty
                                                            List price:
                                                            Discount: %
                                                            Your price::
                                                            Replacement This item is not available
                                                            Replacement Product This item may be available through a distributor
                                                            Qty

                                                            Sold in pkg. of

                                                            ORIGINAL PRODUCT

                                                            KM80TS™ Schneidköpfe

                                                            M-Clamping
                                                            (8 Products)
                                                            • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                                                            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                                            • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                                            • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                                            View Products
                                                            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                            3662525 KM80TSMCLNL12 KM80TSMCLNL12 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..120408/CN..432 2.21 4.87
                                                              List price:
                                                              $513.81 /each.
                                                              Your price::
                                                              Qty
                                                              3662526 KM80TSMCLNL16 KM80TSMCLNL16 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..160612/CN..543 2.20 4.86
                                                                List price:
                                                                $513.81 /each.
                                                                Your price::
                                                                Qty
                                                                3662527 KM80TSMCLNL19 KM80TSMCLNL19 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..190612/CN..643 2.20 4.85
                                                                  List price:
                                                                  $513.81 /each.
                                                                  Your price::
                                                                  Qty
                                                                  3662528 KM80TSMCLNL25 KM80TSMCLNL25 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..250924/CN..866 2.21 4.86
                                                                    List price:
                                                                    $513.81 /each.
                                                                    Your price::
                                                                    Qty
                                                                    3662529 KM80TSMCLNR12 KM80TSMCLNR12 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..120408/CN..432 2.21 4.87
                                                                      List price:
                                                                      $513.81 /each.
                                                                      Your price::
                                                                      Qty
                                                                      3662530 KM80TSMCLNR16 KM80TSMCLNR16 70.0000 2.756 53.0000 2.086 106.0000 4.173 CN..160612/CN..543 2.20 4.86
                                                                        List price:
                                                                        $513.81 /each.
                                                                        Your price::
                                                                        Qty
                                                                        List price:
                                                                        Discount: %
                                                                        Your price::
                                                                        Replacement This item is not available
                                                                        Replacement Product This item may be available through a distributor
                                                                        Qty

                                                                        Sold in pkg. of

                                                                        ORIGINAL PRODUCT

                                                                        KM80TS™ Schneidköpfe

                                                                        M-Clamping
                                                                        (2 Products)
                                                                        • Schaft –  KM-TS  ISO 26622Schaft – KM-TS ISO 26622
                                                                        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                                                        • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                                                        • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                                                                        View Products
                                                                        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                                                                        3662523 KM80TSMCKNL19 KM80TSMCKNL19 70.0000 2.756 53.0000 2.086