successfully added to cart
View Cart
COVID-19: How WIDIA is responding
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (24)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (24)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (24)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (24)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (24)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (24)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (24)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (24)
  • M Stainless Steel (24)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (24)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (24)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (24)
  • K Cast Iron (24)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (24)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (24)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (24)
  • N Non-Ferrous Materials (24)
    • N1
      Wrought Aluminum
      (24)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (24)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (16)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (24)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (24)
    • N6
      Carbon, Graphite Composites, CFRP
      (22)
    • N7
      MMC's
      (24)
  • S High-Temp Alloys (24)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (24)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (24)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (24)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (24)
  • H Hardened Materials (22)
    • H1
      Hardened Materials 44-48 HRC
      (22)
    • H2
      Hardened Materials 48-55 HRC
      (22)
    • H3
      Hardened Materials 56-60 HRC
      (22)
    • H4
      Hardened Materials >60 HRC
      (22)
Applications
  • Back Boring Back Boring (24)
  • Chamfer Turning Chamfer Turning (24)
  • Cut-Off Cut-Off (24)
  • Deep Grooving Deep Grooving (24)
  • Face Grooving Face Grooving (24)
  • Facing Facing (24)
  • Grooving Grooving (24)
  • ID Facing ID Facing (24)
  • ID Grooving ID Grooving (24)
  • Multiple Direction Cutting Multiple Direction Cutting (24)
  • Plunge Turning Plunge Turning (24)
  • Profiling Profiling (24)
  • TRN Boring TRN Boring (24)
  • Turning Turning (24)
Cutting Condition
  • Heavily Interrupted Cut (24)
  • Interrupted (22)
  • Lightly Interrupted Cut (24)
  • Smooth Cut (24)
  • Varying Depth of Cut (24)
Tool Cutting Edge Angle
  • 93.0 (8)
  • 95.0 (16)
to
Connection Style
  • KM (24)
Cutting Edges Per Insert
  • 1.0 (22)
  • 2.0 (16)
  • 3.0 (8)
  • 4.0 (16)
  • 6.0 (8)
  • 8.0 (8)
to
cornerConfiguration
Corner Radius
  • 0.1 (18)
  • 0.102 (14)
  • 0.2 (18)
  • 0.203 (8)
  • 0.34 (6)
  • 0.397 (24)
  • 0.4 (24)
  • 0.406 (6)
  • 0.6 (8)
  • 0.792 (14)
  • 0.794 (24)
  • 0.8 (24)
  • 1.19 (8)
  • 1.191 (24)
  • 1.2 (24)
  • 1.587 (8)
  • 1.588 (16)
  • 1.6 (22)
to
Corner Radius
  • 0.004 (24)
  • 0.008 (18)
  • 0.0083 (8)
  • 0.013 (6)
  • 0.0156 (24)
  • 0.016 (22)
  • 0.031 (24)
  • 0.0312 (24)
  • 0.0313 (24)
  • 0.0315 (8)
  • 0.0469 (24)
  • 0.047 (22)
  • 0.0472 (8)
  • 0.0625 (22)
  • 0.063 (22)
  • 0.1563 (8)
  • 0.312 (6)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (14)
  • 241 (8)
  • CL4 (14)
  • CM2 (14)
  • CM3 (14)
  • CM4 (8)
  • CPX (14)
  • CW2 (14)
  • CW2015 (14)
  • CW5025 (22)
  • GX (8)
  • HK1500 (22)
  • HT2 (16)
  • HTX (8)
  • K060 (8)
  • K090 (14)
  • K1 (8)
  • K10M (22)
  • K10P (22)
  • K10U (16)
  • K15U (22)
  • K20K (22)
  • K21 (8)
  • K25M (24)
  • K25P (22)
  • K313 (24)
  • K35P (8)
  • K420 (8)
  • K45 (8)
  • K68 (14)
  • KB1340 (10)
  • KB1345 (8)
  • KB1610 (16)
  • KB1625 (8)
  • KB1630 (8)
  • KB5610 (16)
  • KB5625 (8)
  • KB5630 (8)
  • KB9610 (22)
  • KB9640 (18)
  • KBH10 (22)
  • KBH10B (14)
  • KBH20 (22)
  • KBH20B (14)
  • KBK35 (8)
  • KC210 (14)
  • KC250 (8)
  • KC5010 (24)
  • KC5025 (24)
  • KC5410 (22)
  • KC5510 (24)
  • KC5525 (24)
  • KC710 (8)
  • KC720 (16)
  • KC722 (8)
  • KC730 (18)
  • KC7310 (24)
  • KC732 (16)
  • KC8050 (24)
  • KC810 (24)
  • KC850 (24)
  • KC9010 (24)
  • KC9025 (24)
  • KC910 (22)
  • KC9105 (24)
  • KC9110 (24)
  • KC9120 (24)
  • KC9125 (24)
  • KC9140 (24)
  • KC9145 (22)
  • KC9210 (6)
  • KC9215 (24)
  • KC9225 (24)
  • KC9240 (24)
  • KC9240NEW (24)
  • KC9245 (24)
  • KC9315 (24)
  • KC9320 (24)
  • KC9325 (24)
  • KC935 (24)
  • KC950 (22)
  • KC990 (24)
  • KCK05 (24)
  • KCK05B (24)
  • KCK15 (24)
  • KCK15B (24)
  • KCK20 (24)
  • KCK20B (24)
  • KCM15 (24)
  • KCM15B (24)
  • KCM25 (24)
  • KCM25B (24)
  • KCM35 (22)
  • KCM35B (22)
  • KCP05 (24)
  • KCP05B (24)
  • KCP10 (24)
  • KCP10B (24)
  • KCP25 (24)
  • KCP25B (24)
  • KCP30 (24)
  • KCP30B (22)
  • KCP40 (22)
  • KCP40B (22)
  • KCPK05 (24)
  • KCS10 (8)
  • KCS10B (24)
  • KCU10 (24)
  • KCU25 (24)
  • KD050 (8)
  • KD081 (8)
  • KD100 (8)
  • KD120 (8)
  • KD1400 (16)
  • KD1405 (8)
  • KD1425 (16)
  • KM1 (8)
  • KMF (8)
  • KT1120 (8)
  • KT125 (14)
  • KT150 (8)
  • KT175 (14)
  • KT315 (24)
  • KT325 (16)
  • KU10T (24)
  • KU30T (24)
  • KY1310 (16)
  • KY1320 (22)
  • KY1540 (8)
  • KY1615 (14)
  • KY2000 (8)
  • KY2100 (8)
  • KY3000 (14)
  • KY3400 (16)
  • KY3500 (22)
  • KY4000 (8)
  • KY4300 (8)
  • KY4400 (22)
  • KYHK15B (22)
  • KYK10 (16)
  • KYK25 (16)
  • KYK35 (22)
  • KYS25 (8)
  • KYS30 (16)
  • NL200 (14)
  • NL250 (24)
  • NL300 (14)
  • NL400 (16)
  • NL920 (22)
  • P25 (8)
  • PB100 (8)
  • PB170 (8)
  • PB250 (8)
  • PB300 (8)
  • PS5 (16)
  • SP0819 (22)
  • SP3019 (16)
  • SP4019 (8)
  • THM (8)
  • THM-X (14)
  • THMF-X (8)
  • TN10P (24)
  • TN10U (22)
  • TN15M (22)
  • TN15U (22)
  • TN2000 (22)
  • TN20K (22)
  • TN20P (24)
  • TN30M (24)
  • TN30P (22)
  • TN4000 (22)
  • TN5015 (24)
  • TN5020 (24)
  • TN5105 (24)
  • TN5120 (24)
  • TN6010 (14)
  • TN6025 (22)
  • TN7005 (24)
  • TN7010 (24)
  • TN7015 (24)
  • TN7025 (24)
  • TN7035 (22)
  • TN7105 (24)
  • TN7110 (24)
  • TN7115 (24)
  • TN7125 (24)
  • TN7135 (22)
  • TN8025 (24)
  • TTI15 (16)
  • TTR (8)
  • TTS (14)
  • TTX (14)
  • WBH10C (14)
  • WBH10P (8)
  • WBH10U (8)
  • WBH20P (14)
  • WBH25P (8)
  • WBH25U (14)
  • WBH30P (8)
  • WBK40U (10)
  • WBK45U (14)
  • WDN00U (8)
  • WDN25U (16)
  • WK05CT (24)
  • WK15CT (22)
  • WK20CT (24)
  • WM15CT (24)
  • WM25CT (24)
  • WM35CT (24)
  • WP05CT (16)
  • WP15CT (24)
  • WP20TT (2)
  • WP25CT (24)
  • WP35CT (24)
  • WS10PT (24)
  • WS25PT (24)
  • WU10HT (24)
  • X00511 (8)
Hand Of Tool
  • L (12)
  • R (12)
Wiper Insert
  • N (24)
  • Y (24)
Minimum Axial Groove Diameter
  • 1.26 (6)
  • 1.575 (6)
  • 1.969 (6)
  • 2.48 (6)
to
Minimum Axial Groove Diameter
  • 32.0 (6)
  • 40.0 (6)
  • 50.0 (6)
  • 63.0 (6)
to
Cutting Direction
  • B (16)
  • E (8)
Rake Angle Style
  • DOUBLE NEGATIVE (24)
Maximum Bore Depth
  • 88.33 (6)
  • 112.27 (6)
  • 113.92 (3)
  • 114.05 (3)
  • 144.05 (6)
to
Maximum Bore Depth
  • 3.477 (6)
  • 4.42 (6)
  • 4.485 (3)
  • 4.49 (3)
  • 5.671 (6)
to
Boring Bar Material
  • S (24)
frontEnd
Clamp Style
  • P (24)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (8)
  • D-DIAMOND/RHOMBIC 55 (8)
  • W-TRIGON 80 (8)
insertGeometry
Cutting Tool Material
  • B H (24)
  • B L (22)
  • C A (22)
  • C N (22)
  • D P (22)
  • H T (24)
  • H W (24)
backEnd
Connection Type
  • TAPER SHANK (24)
System Size
  • KM4X63 (24)
Back-End Diameter
  • 2.5 (24)
to
Back-End Diameter
  • 63.0 (24)
to
other
Platform
  • KM4X63 (24)
Tool Unit
  • M (24)
Over All Length [L]
  • 125.0 (6)
  • 140.0 (12)
  • 170.0 (6)
to
Over All Length [L]
  • 4.921 (6)
  • 5.512 (12)
  • 6.693 (6)
to
Insert Hand
  • N (24)
obsoleteFacet
  • false (24)
  • true (24)
Cutting Condition Material
  • H-All (22)
  • K-All (24)
  • K1 (10)
  • M-All (24)
  • N-All (24)
  • P-All (24)
  • S-All (24)
  • S2 (22)
  • S4 (8)
No filters matching ""
View Products in
Metric
Inch
KM4X63 Schneidköpfe zur Innenbearbeitung

(8 Products)
  • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
  • Shank: KM4X™Shank: KM4X™
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
5589480 KM4X63S25KPCLNL12 KM4X63S25KPCLNL12 25.0000 .9840 32.0000 1.260 17.0000 .6690 88.3300 3.477 125.0000 4.921 CN..120408/CN..432 1.11 2.44
    List price:
    $529.06 /each.
    Your price::
    Qty
    5589481 KM4X63S25KPCLNR12 KM4X63S25KPCLNR12 25.0000 .9840 32.0000 1.260 17.0000 .6690 88.3300 3.477 125.0000 4.921 CN..120408/CN..432 1.11 2.45
      List price:
      $529.06 /each.
      Your price::
      Qty
      5589462 KM4X63S32LPCLNL12 KM4X63S32LPCLNL12 32.0000 1.260 40.0000 1.575 22.0000 .8660 112.2700 4.420 140.0000 5.512 CN..120408/CN..432 1.11 2.44
        List price:
        $529.06 /each.
        Your price::
        Qty
        5589463 KM4X63S32LPCLNR12 KM4X63S32LPCLNR12 32.0000 1.260 40.0000 1.575 22.0000 .8660 112.2700 4.420 140.0000 5.512 CN..120408/CN..432 1.36 3.00
          List price:
          $529.06 /each.
          Your price::
          Qty
          5589474 KM4X63S40LPCLNL12 KM4X63S40LPCLNL12 40.0000 1.575 50.0000 1.969 27.0000 1.063 114.0500 4.490 140.0000 5.512 CN..120408/CN..432 1.72 3.79
            List price:
            $529.06 /each.
            Your price::
            Qty
            5589475 KM4X63S40LPCLNR12 KM4X63S40LPCLNR12 40.0000 1.575 50.0000 1.969 27.0000 1.063 114.0500 4.490 140.0000 5.512 CN..120408/CN..432 1.72 3.79
              List price:
              $529.06 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              KM4X63 Schneidköpfe zur Innenbearbeitung

              (8 Products)
              • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
              • Shank: KM4X™Shank: KM4X™
              • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
              5589482 KM4X63S25KPDUNL11 KM4X63S25KPDUNL11 25.0000 .9840 32.0000 1.260 17.0000 .6690 88.3300 3.477 125.0000 4.921 DN..110408/DN..332 1.11 2.45
                List price:
                $529.06 /each.
                Your price::
                Qty
                5589483 KM4X63S25KPDUNR11 KM4X63S25KPDUNR11 25.0000 .9840 32.0000 1.260 17.0000 .6690 88.3300 3.477 125.0000 4.921 DN..110408/DN..332 1.11 2.45
                  List price:
                  $529.06 /each.
                  Your price::
                  Qty
                  5589464 KM4X63S32LPDUNL15 KM4X63S32LPDUNL15 32.0000 1.260 40.0000 1.575 22.0000 .8660 112.2700 4.420 140.0000 5.512 DN..150608/DN..442 1.35 2.97
                    List price:
                    $529.06 /each.
                    Your price::
                    Qty
                    5589465 KM4X63S32LPDUNR15 KM4X63S32LPDUNR15 32.0000 1.260 40.0000 1.575 22.0000 .8660 112.2700 4.420 140.0000 5.512 DN..150608/DN..442 1.35 2.97
                      List price:
                      $529.06 /each.
                      Your price::
                      Qty
                      5589476 KM4X63S40LPDUNL15 KM4X63S40LPDUNL15 40.0000 1.575 50.0000 1.969 27.0000 1.063 113.9200 4.485 140.0000 5.512 DN..150608/DN..442 1.70 3.76
                        List price:
                        $529.06 /each.
                        Your price::
                        Qty
                        5589477 KM4X63S40LPDUNR15 KM4X63S40LPDUNR15 40.0000 1.575 50.0000 1.969 27.0000 1.063 113.9200 4.485 140.0000 5.512 DN..150608/DN..442 1.70 3.75
                          List price:
                          $529.06 /each.
                          Your price::
                          Qty
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty
                          KM4X63 Schneidköpfe zur Innenbearbeitung

                          (8 Products)
                          • Kühlmittel –  Innere Kühlmittelzuführung  100 bar (1500 psi)  MaximumKühlmittel – Innere Kühlmittelzuführung 100 bar (1500 psi) Maximum
                          • Shank: KM4X™Shank: KM4X™
                          • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
                          5589484 KM4X63S25KPWLNL08 KM4X63S25KPWLNL08 25.0000 .9840 32.0000 1.260 17.0000 .6690 88.3300 3.477 125.0000 4.921 WN..080408/WN..432 1.11 2.45
                            List price:
                            $529.06 /each.
                            Your price::
                            Qty
                            5589485 KM4X63S25KPWLNR08 KM4X63S25KPWLNR08 25.0000 .9840 32.0000 1.260 17.0000 .6690 88.3300 3.477 125.0000 4.921 WN..080408/WN..432 1.11 2.45
                              List price:
                              $529.06 /each.
                              Your price::
                              Qty
                              5589466 KM4X63S32LPWLNL08 KM4X63S32LPWLNL08 32.0000 1.260 40.0000 1.575 22.0000 .8660 112.2700 4.420 140.0000 5.512 WN..080408/WN..432 1.34 2.95
                                List price:
                                $529.06 /each.
                                Your price::
                                Qty
                                5589467 KM4X63S32LPWLNR08 KM4X63S32LPWLNR08 32.0000 1.260 40.0000 1.575 22.0000 .8660 112.2700 4.420 140.0000 5.512 WN..080408/WN..432 1.34 2.95
                                  List price:
                                  $529.06 /each.
                                  Your price::
                                  Qty
                                  5589478 KM4X63S40LPWLNL08 KM4X63S40LPWLNL08 40.0000 1.575 50.0000 1.969 27.0000 1.063 113.9200 4.485 140.0000 5.512 WN..080408/WN..432 1.69 3.74
                                    List price:
                                    $529.06 /each.
                                    Your price::
                                    Qty
                                    5589479 KM4X63S40LPWLNR08 KM4X63S40LPWLNR08 40.0000 1.575 50.0000 1.969 27.0000 1.063 114.0500 4.490 140.0000 5.512 WN..080408/WN..432 1.69 3.74
                                      List price:
                                      $529.06 /each.
                                      Your price::
                                      Qty
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty
                                      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                      You are about to create a duplicate . Do you want to proceed?
                                      You are about to delete Do you want to proceed?
                                      What would you like to rename your to?
                                      Please enter a valid name
                                      Please enter a name for the duplicate
                                      Please enter a valid name
                                      You are about to add to your My Solutions page. Do you want to proceed?
                                      Please enter a valid name
                                      Send a copy of

                                      Please enter a valid Email
                                      Please enter a valid name

                                      We have found the following CAD Drawings

                                      Select the files you are looking for and download them all at once

                                      You should be logged to see your dashboard information
                                      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                      item(s) successfully added to the cart
                                      View Cart