New Customer
Are you new to WIDIA? Create an account and get started.
Create AccountRegistered Customer
Already have an account? Sign in.
Sign InSelected Account
There is an issue with your account. Please Contact Customer Service.
Sold-to
Change Account
Ship To Account
Change Account
New Customer
Are you new to WIDIA? Create an account and get started.
Create AccountRegistered Customer
Already have an account? Sign in.
Sign InSelected Account
There is an issue with your account. Please Contact Customer Service.
Sold-to
Change Account
Ship To Account
Change Account
successfully added to cart
View Cart
View Cart
Notifications
Mark all as read
Filters and Columns
Filters
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
Workpiece Material
-
P Steel (6)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(6)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(6)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(6)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(6)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(6)
-
-
M Stainless Steel (6)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(6)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(6)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(6)
-
-
K Cast Iron (6)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(6)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(6)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(6)
-
-
S High-Temp Alloys (6)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(6)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(6)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(6)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(6)
-
-
H Hardened Materials (6)
-
H1Hardened Materials 44-48 HRC(6)
-
H2Hardened Materials 48-55 HRC(6)
-
Applications
Applications
-
Pocket Helical (6)
-
Pocket Milling (6)
-
Ramping (6)
-
Shoulder Milling (6)
-
Shoulder Square End (6)
-
Slot Milling (6)
-
Slot Square End (6)
Cutting Diameter
Cutting Diameter
-
0.125 in (1)
-
0.188 in (1)
-
0.25 in (1)
-
0.313 in (1)
-
0.375 in (1)
-
0.438 in (1)
to
Cutting Diameter
Cutting Diameter
-
3.176 mm (1)
-
4.775 mm (1)
-
6.351 mm (1)
-
7.95 mm (1)
-
9.525 mm (1)
-
11.125 mm (1)
to
Cutting Length
Cutting Length
-
12.701 mm (1)
-
15.875 mm (1)
-
19.05 mm (2)
-
22.225 mm (2)
to
Cutting Length
Cutting Length
-
0.5 in (1)
-
0.625 in (1)
-
0.75 in (2)
-
0.875 in (2)
to
Back-End
Back-End Diameter
Back-End Diameter
-
3.176 mm (1)
-
4.775 mm (1)
-
6.351 mm (1)
-
7.95 mm (1)
-
9.525 mm (1)
-
11.125 mm (1)
to
Back-End Diameter
Back-End Diameter
-
0.125 in (1)
-
0.188 in (1)
-
0.25 in (1)
-
0.313 in (1)
-
0.375 in (1)
-
0.438 in (1)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1- 6
of 6 results
Metric
Inch
Show
Metric
Inch
SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | Adapter Style Machine Side | [D1] Effective Cutting Diameter | [D1] Effective Cutting Diameter | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [AP1MAX] 1st Maximum Cutting Depth | [AP1MAX] 1st Maximum Cutting Depth | [L] Overall Length | [L] Overall Length | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6945917 | W411E03010SZT | W411E03010SZT | WU20PE | Straight-Cylindrical | 3.1750 | .1250 | 3.175 | .125 | 12.7000 | .5000 | 50.8000 | 2.000 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
₹1,160.00
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6945593 | W411E05011SZT | W411E05011SZT | WU20PE | Straight-Cylindrical | 4.7630 | .1875 | 4.763 | .1875 | 15.8750 | .6250 | 57.1500 | 2.250 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6945595 | W411E07013SZT | W411E07013SZT | WU20PE | Straight-Cylindrical | 6.3500 | .2500 | 6.35 | .25 | 19.0500 | .7500 | 63.5000 | 2.500 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6945585 | W411E08014SZT | W411E08014SZT | WU20PE | Straight-Cylindrical | 7.9380 | .3125 | 7.938 | .3125 | 19.0500 | .7500 | 63.5000 | 2.500 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
₹2,800.00
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6945586 | W411E10015SZT | W411E10015SZT | WU20PE | Straight-Cylindrical | 9.5250 | .3750 | 9.525 | .375 | 22.2250 | .8750 | 63.5000 | 2.500 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
₹3,370.00
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6945711 | W411E1101DSZT | W411E1101DSZT | WU20PE | Straight-Cylindrical | 11.1130 | .4375 | 11.113 | .4375 | 22.2250 | .8750 | 63.5000 | 2.500 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
₹4,910.00
/each
Your price:
Qty
|
List price:
Discount: %
Replacement
This item is no longer available
Replacement Product Please contact customer service for assistance
Replacement Product Please contact customer service for assistance
Qty
Sold in pkg. of
Grades
-
WU20PEP SteelS High-Temp AlloysH Hardened MaterialsK Cast IronM Stainless Steel
Ae/D | 2% | 4% | 5% | 8% | 10% | 12% | 20% | 30% | 40% | 50% | 100% | |
Współczynnik prędkości skrawania | Kv | 1,9 3,3 | 1,45 2,7 | 1,45 2,3 | 1,45 | 1,3 | 1,3 | 1,2 | 1,1 | 1,0 | 0,9 | 0,8 |
Współczynnik posuwu | KFz | 3,51 | 2,51 | 2,25 | 1,80 | 1,64 | 1,51 | 1,23 | 1,07 | 1,00 | 0,98 | 0,98 |
Ae/D | 2% | 4% | 5% | 8% | 10% | 12% | 20% | 30% | 40% | 50% | 100% | |
Współczynnik prędkości skrawania | Kv | 1.9 3.3 | 1.45 2.7 | 1.45 2.3 | 1.45 | 1.3 | 1.3 | 1.2 | 1.1 | 1.0 | 0.9 | 0.8 |
Współczynnik posuwu | KFz | 3.51 | 2.51 | 2.25 | 1.80 | 1.64 | 1.51 | 1.23 | 1.07 | 1.00 | 0.98 | 0.98 |
WU20PE | Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%. | |||||||||||||||||
Frezowanie walcowe | Frezowanie rowków | Prędkość skrawania Vc SFM | D1 Średnica | |||||||||||||||
Grupa materiałowa | ap | ae | ap | min. | Początek | maks. | ułamek | 1/8 | 3/16 | 1/4 | 5/16 | 3/8 | 7/16 | 1/2 | 5/8 | 3/4 | 1 | |
P | 0 | ap1max | 0.4 x D1 | 1.0 x D1 | 490 | 580 | 660 | IPT | .0009 | .0013 | .0018 | .0023 | .0027 | .0031 | .0034 | .0039 | .0044 | .0049 |
P | 1 | ap1max | 0.4 x D1 | 1.0 x D1 | 490 | 580 | 660 | IPT | .0009 | .0013 | .0018 | .0023 | .0027 | .0031 | .0034 | .0039 | .0044 | .0049 |
P | 2 | ap1max | 0.4 x D1 | 1.0 x D1 | 460 | 540 | 620 | IPT | .0009 | .0013 | .0018 | .0023 | .0027 | .0031 | .0034 | .0039 | .0044 | .0049 |
P | 3 | ap1max | 0.4 x D1 | 1.0 x D1 | 390 | 450 | 520 | IPT | .0007 | .0011 | .0015 | .0020 | .0023 | .0026 | .0029 | .0034 | .0039 | .0045 |
P | 4 | ap1max | 0.4 x D1 | 0.75 x D1 | 300 | 400 | 490 | IPT | .0007 | .0010 | .0014 | .0017 | .0020 | .0023 | .0026 | .0030 | .0034 | .0039 |
P | 5 | ap1max | 0.4 x D1 | 1.0 x D1 | 200 | 260 | 330 | IPT | .0006 | .0009 | .0012 | .0017 | .0018 | .0021 | .0023 | .0027 | .0031 | .0036 |
P | 6 | ap1max | 0.4 x D1 | 0.75 x D1 | 160 | 200 | 250 | IPT | .0005 | .0008 | .0010 | .0013 | .0015 | .0017 | .0019 | .0022 | .0025 | .0028 |
M | 1 | ap1max | 0.4 x D1 | 1.0 x D1 | 300 | 340 | 380 | IPT | .0007 | .0011 | .0015 | .0020 | .0023 | .0026 | .0029 | .0034 | .0039 | .0045 |
M | 2 | ap1max | 0.4 x D1 | 1.0 x D1 | 200 | 230 | 260 | IPT | .0006 | .0009 | .0012 | .0016 | .0018 | .0021 | .0023 | .0027 | .0031 | .0036 |
M | 3 | ap1max | 0.4 x D1 | 1.0 x D1 | 200 | 210 | 230 | IPT | .0005 | .00008 | .0010 | .0013 | .0015 | .0017 | .0019 | .0022 | .0025 | .0028 |
K | 1 | ap1max | 0.4 x D1 | 1.0 x D1 | 390 | 440 | 490 | IPT | .0009 | .0013 | .0018 | .0023 | .0027 | .0031 | .0034 | .0039 | .0044 | .0049 |
K | 2 | ap1max | 0.4 x D1 | 1.0 x D1 | 360 | 410 | 460 | IPT | .0007 | .0011 | .0015 | .0020 | .0023 | .0026 | .0029 | .0034 | .0039 | .0045 |
K | 3 | ap1max | 0.4 x D1 | 1.0 x D1 | 360 | 390 | 430 | IPT | .0006 | .0009 | .0012 | .0016 | .0018 | .0021 | .0023 | .0027 | .0031 | .0036 |
S | 1 | ap1max | 0.4 x D1 | 0.3 x D1 | 160 | 230 | 300 | IPT | .0007 | .0011 | .0015 | .0020 | .0023 | .0026 | .0029 | .0034 | .0039 | .0045 |
S | 2 | ap1max | 0.4 x D1 | 0.3 x D1 | 80 | 105 | 130 | IPT | .0004 | .0006 | .0008 | .0010 | .0012 | .0014 | .0015 | .0018 | .0021 | .0024 |
S | 3 | ap1max | 0.4 x D1 | 1.0 x D1 | 80 | 105 | 130 | IPT | .0004 | .0006 | .0008 | .0010 | .0012 | .0014 | .0015 | .0018 | .0021 | .0024 |
S | 4 | ap1max | 0.4 x D1 | 1.0 x D1 | 160 | 180 | 200 | IPT | .0005 | .0008 | .0011 | .0014 | .0017 | .0019 | .0021 | .0025 | .0028 | .0033 |
H | 1 | ap1max | 0.4 x D1 | 0.75 x D1 | 260 | 360 | 460 | IPT | .0007 | .0010 | .0014 | .0017 | .0020 | .0023 | .0026 | .0030 | .0034 | .0039 |
H | 2 | ap1max | 0.4 x D1 | 0.5 x D1 | 230 | 310 | 390 | IPT | .0005 | .0008 | .0010 | .0013 | .0015 | .0017 | .0019 | .0022 | .0025 | .0028 |
WU20PE | Y maks. | ||||||||||||||||
Frezowanie walcowe | Prędkość skrawania Vc SFM | D1 Średnica | |||||||||||||||
Grupa materiałowa | ap | ae | min. | Początek | maks. | ułamek | 1/8 | 3/16 | 1/4 | 5/16 | 3/8 | 7/16 | 1/2 | 5/8 | 3/4 | 1 | |
P | 0 | ap1max | 0.2 x D1 | 490 | 580 | 660 | IPT | .0009 | .0013 | .0018 | .0023 | .0027 | .0031 | .0034 | .0039 | .0044 | .0049 |
P | 1 | ap1max | 0.2 x D1 | 490 | 580 | 660 | IPT | .0009 | .0013 | .0018 | .0023 | .0027 | .0031 | .0034 | .0039 | .0044 | .0049 |
P | 2 | ap1max | 0.2 x D1 | 460 | 540 | 620 | IPT | .0009 | .0013 | .0018 | .0023 | .0027 | .0031 | .0034 | .0039 | .0044 | .0049 |
P | 3 | ap1max | 0.2 x D1 | 390 | 450 | 520 | IPT | .0007 | .0011 | .0015 | .0020 | .0023 | .0026 | .0029 | .0034 | .0039 | .0045 |
P | 4 | ap1max | 0.2 x D1 | 300 | 400 | 490 | IPT | .0007 | .0010 | .0014 | .0017 | .0020 | .0023 | .0026 | .0030 | .0034 | .0039 |
P | 5 | ap1max | 0.2 x D1 | 200 | 260 | 330 | IPT | .0006 | .0009 | .0012 | .0017 | .0018 | .0021 | .0023 | .0027 | .0031 | .0036 |
P | 6 | ap1max | 0.15 x D1 | 160 | 200 | 250 | IPT | .0005 | .0008 | .0010 | .0013 | .0015 | .0017 | .0019 | .0022 | .0025 | .0028 |
M | 1 | ap1max | 0.2 x D1 | 300 | 340 | 380 | IPT | .0007 | .0011 | .0015 | .0020 | .0023 | .0026 | .0029 | .0034 | .0039 | .0045 |
M | 2 | ap1max | 0.2 x D1 | 200 | 230 | 260 | IPT | .0006 | .0009 | .0012 | .0016 | .0018 | .0021 | .0023 | .0027 | .0031 | .0036 |
M | 3 | ap1max | 0.2 x D1 | 200 | 210 | 230 | IPT | .0005 | .00008 | .0010 | .0013 | .0015 | .0017 | .0019 | .0022 | .0025 | .0028 |
K | 1 | ap1max | 0.2 x D1 | 390 | 440 | 490 | IPT | .0009 | .0013 | .0018 | .0023 | .0027 | .0031 | .0034 | .0039 | .0044 | .0049 |
K | 2 | ap1max | 0.2 x D1 | 360 | 410 | 460 | IPT | .0007 | .0011 | .0015 | .0020 | .0023 | .0026 | .0029 | .0034 | .0039 | .0045 |
K | 3 | ap1max | 0.2 x D1 | 360 | 390 | 430 | IPT | .0006 | .0009 | .0012 | .0016 | .0018 | .0021 | .0023 | .0027 | .0031 | .0036 |
S | 1 | ap1max | 0.1 x D1 | 160 | 230 | 300 | IPT | .0007 | .0011 | .0015 | .0020 | .0023 | .0026 | .0029 | .0034 | .0039 | .0045 |
S | 2 | ap1max | 0.1 x D1 | 80 | 105 | 130 | IPT | .0004 | .0006 | .0008 | .0010 | .0012 | .0014 | .0015 | .0018 | .0021 | .0024 |
S | 3 | ap1max | 0.15 x D1 | 80 | 105 | 130 | IPT | .0004 | .0006 | .0008 | .0010 | .0012 | .0014 | .0015 | .0018 | .0021 | .0024 |
S | 4 | ap1max | 0.15 x D1 | 160 | 180 | 200 | IPT | .0005 | .0008 | .0011 | .0014 | .0017 | .0019 | .0021 | .0025 | .0028 | .0033 |
H | 1 | ap1max | 0.15 x D1 | 260 | 360 | 460 | IPT | .0007 | .0010 | .0014 | .0017 | .0020 | .0023 | .0026 | .0030 | .0034 | .0039 |
H | 2 | ap1max | 0.15 x D1 | 230 | 310 | 390 | IPT | .0005 | .0008 | .0010 | .0013 | .0015 | .0017 | .0019 | .0022 | .0025 | .0028 |
WU20PE | Zalecana wartość posuwu na ostrze fz (mm/ostrze) dla frezowania walcowego (A). W przypadku frezowania rowków (B) wartość posuwu należy zmniejszyć o 20%. | |||||||||||||||||||
Frezowanie walcowe | Frezowanie rowków | Prędkość skrawania Vc m/min | D1 Średnica | |||||||||||||||||
Grupa materiałowa | ap | ae | ap | min. | Początek | maks. | mm | 3,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | |
P | 0 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 150 | 175 | 200 | fz | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
P | 1 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 150 | 175 | 200 | fz | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
P | 2 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 140 | 165 | 190 | fz | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
P | 3 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 120 | 140 | 160 | fz | 0,017 | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
P | 4 | Ap1 Max | 0,4 x D1 | 0,75 x D1 | 90 | 120 | 150 | fz | 0,016 | 0,021 | 0,027 | 0,033 | 0,045 | 0,054 | 0,062 | 0,070 | 0,077 | 0,083 | 0,088 | 0,098 |
P | 5 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 60 | 80 | 100 | fz | 0,014 | 0,019 | 0,024 | 0,029 | 0,040 | 0,048 | 0,056 | 0,063 | 0,070 | 0,076 | 0,081 | 0,091 |
P | 6 | Ap1 Max | 0,4 x D1 | 0,75 x D1 | 50 | 65 | 75 | fz | 0,012 | 0,016 | 0,020 | 0,025 | 0,034 | 0,040 | 0,047 | 0,052 | 0,057 | 0,061 | 0,065 | 0,071 |
M | 1 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 90 | 100 | 115 | fz | 0,017 | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
M | 2 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 60 | 70 | 80 | fz | 0,014 | 0,019 | 0,024 | 0,029 | 0,040 | 0,048 | 0,056 | 0,063 | 0,070 | 0,076 | 0,081 | 0,091 |
M | 3 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 60 | 65 | 70 | fz | 0,012 | 0,016 | 0,020 | 0,025 | 0,034 | 0,040 | 0,047 | 0,052 | 0,057 | 0,061 | 0,065 | 0,071 |
K | 1 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 120 | 135 | 150 | fz | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
K | 2 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 110 | 125 | 140 | fz | 0,017 | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
K | 3 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 110 | 120 | 130 | fz | 0,014 | 0,019 | 0,024 | 0,029 | 0,040 | 0,048 | 0,056 | 0,063 | 0,070 | 0,076 | 0,081 | 0,091 |
S | 1 | Ap1 Max | 0,4 x D1 | 0,3 x D1 | 50 | 70 | 90 | fz | 0,017 | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
S | 2 | Ap1 Max | 0,4 x D1 | 0,3 x D1 | 25 | 30 | 40 | fz | 0,009 | 0,013 | 0,016 | 0,019 | 0,026 | 0,032 | 0,037 | 0,042 | 0,046 | 0,050 | 0,054 | 0,061 |
S | 3 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 25 | 30 | 40 | fz | 0,009 | 0,013 | 0,016 | 0,019 | 0,026 | 0,032 | 0,037 | 0,042 | 0,046 | 0,050 | 0,054 | 0,061 |
S | 4 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 50 | 55 | 60 | fz | 0,011 | 0,016 | 0,021 | 0,026 | 0,037 | 0,045 | 0,052 | 0,058 | 0,064 | 0,069 | 0,074 | 0,084 |
H | 1 | Ap1 Max | 0,4 x D1 | 0,75 x D1 | 80 | 110 | 140 | fz | 0,016 | 0,021 | 0,027 | 0,033 | 0,045 | 0,054 | 0,062 | 0,070 | 0,077 | 0,083 | 0,088 | 0,098 |
H | 2 | Ap1 Max | 0,4 x D1 | 0,5 x D1 | 70 | 90 | 120 | fz | 0,012 | 0,016 | 0,020 | 0,025 | 0,034 | 0,040 | 0,047 | 0,052 | 0,057 | 0,061 | 0,065 | 0,071 |
WU20PE | Zalecana wartość posuwu na ostrze fz (mm/ostrze) dla frezowania walcowego (A). W przypadku frezowania rowków (B) wartość posuwu należy zmniejszyć o 20%. | ||||||||||||||||||
Frezowanie walcowe | Frezowanie rowków | Prędkość skrawania Vc m/min | D1 Średnica | ||||||||||||||||
Grupa materiałowa | ap | ae | ap | min. | Początek | maks. | mm | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | |
P | 0 | ap1max | 0,4 x D | 0,3 x D | 150 | – | 200 | fz | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
P | 1 | ap1max | 0,4 x D | 0,3 x D | 150 | – | 200 | fz | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
P | 2 | ap1max | 0,4 x D | 0,3 x D | 140 | – | 190 | fz | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
P | 3 | ap1max | 0,4 x D | 0,3 x D | 120 | – | 160 | fz | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
P | 4 | ap1max | 0,4 x D | 0,3 x D | 90 | – | 150 | fz | 0,021 | 0,027 | 0,033 | 0,045 | 0,054 | 0,062 | 0,070 | 0,077 | 0,083 | 0,088 | 0,098 |
P | 5 | ap1max | 0,4 x D | 0,3 x D | 60 | – | 100 | fz | 0,019 | 0,024 | 0,029 | 0,040 | 0,048 | 0,056 | 0,063 | 0,070 | 0,076 | 0,081 | 0,091 |
P | 6 | ap1max | 0,4 x D | 0,3 x D | 50 | – | 75 | fz | 0,016 | 0,020 | 0,025 | 0,034 | 0,040 | 0,047 | 0,052 | 0,057 | 0,061 | 0,065 | 0,071 |
M | 1 | ap1max | 0,4 x D | 0,3 x D | 90 | – | 115 | fz | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
M | 2 | ap1max | 0,4 x D | 0,3 x D | 60 | – | 80 | fz | 0,019 | 0,024 | 0,029 | 0,040 | 0,048 | 0,056 | 0,063 | 0,070 | 0,076 | 0,081 | 0,091 |
M | 3 | ap1max | 0,4 x D | 0,3 x D | 60 | – | 70 | fz | 0,016 | 0,020 | 0,025 | 0,034 | 0,040 | 0,047 | 0,052 | 0,057 | 0,061 | 0,065 | 0,071 |
K | 1 | ap1max | 0,4 x D | 0,3 x D | 120 | – | 150 | fz | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
K | 2 | ap1max | 0,4 x D | 0,3 x D | 110 | – | 140 | fz | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
K | 3 | ap1max | 0,4 x D | 0,3 x D | 110 | – | 130 | fz | 0,019 | 0,024 | 0,029 | 0,040 | 0,048 | 0,056 | 0,063 | 0,070 | 0,076 | 0,081 | 0,091 |
S | 1 | ap1max | 0,3 x D | 0,2 x D | 50 | – | 90 | fz | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
S | 2 | ap1max | 0,3 x D | 0,2 x D | 25 | – | 40 | fz | 0,013 | 0,016 | 0,019 | 0,026 | 0,032 | 0,037 | 0,042 | 0,046 | 0,050 | 0,054 | 0,061 |
S | 3 | ap1max | 0,4 x D | 0,3 x D | 60 | – | 80 | fz | 0,019 | 0,024 | 0,029 | 0,040 | 0,048 | 0,056 | 0,063 | 0,070 | 0,076 | 0,081 | 0,091 |
S | 4 | ap1max | 0,4 x D | 0,3 x D | 50 | – | 60 | fz | 0,016 | 0,021 | 0,026 | 0,037 | 0,045 | 0,052 | 0,058 | 0,064 | 0,069 | 0,074 | 0,084 |
H | 1 | ap1max | 0,4 x D | 0,3 x D | 80 | – | 140 | fz | 0,021 | 0,027 | 0,033 | 0,045 | 0,054 | 0,062 | 0,070 | 0,077 | 0,083 | 0,088 | 0,098 |
H | 2 | ap1max | 0,2 x D | 0,3 x D | 70 | – | 120 | fz | 0,016 | 0,020 | 0,025 | 0,034 | 0,040 | 0,047 | 0,052 | 0,057 | 0,061 | 0,065 | 0,071 |
WU20PE | Zalecana wartość posuwu na ostrze fz (mm/ostrze) dla frezowania walcowego (A). W przypadku frezowania rowków (B) wartość posuwu należy zmniejszyć o 20%. | |||||||||||||||||||
Frezowanie walcowe | Frezowanie rowków | Prędkość skrawania Vc m/min | D1 Średnica | |||||||||||||||||
Grupa materiałowa | ap | ae | ap | min. | Początek | maks. | mm | 3,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | |
P | 0 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 150 | 175 | 200 | fz | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
P | 1 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 150 | 175 | 200 | fz | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
P | 2 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 140 | 165 | 190 | fz | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
P | 3 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 120 | 140 | 160 | fz | 0,017 | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
P | 4 | Ap1 Max | 0,4 x D1 | 0,75 x D1 | 90 | 120 | 150 | fz | 0,016 | 0,021 | 0,027 | 0,033 | 0,045 | 0,054 | 0,062 | 0,070 | 0,077 | 0,083 | 0,088 | 0,098 |
P | 5 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 60 | 80 | 100 | fz | 0,014 | 0,019 | 0,024 | 0,029 | 0,040 | 0,048 | 0,056 | 0,063 | 0,070 | 0,076 | 0,081 | 0,091 |
P | 6 | Ap1 Max | 0,4 x D1 | 0,75 x D1 | 50 | 65 | 75 | fz | 0,012 | 0,016 | 0,020 | 0,025 | 0,034 | 0,040 | 0,047 | 0,052 | 0,057 | 0,061 | 0,065 | 0,071 |
M | 1 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 90 | 100 | 115 | fz | 0,017 | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
M | 2 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 60 | 70 | 80 | fz | 0,014 | 0,019 | 0,024 | 0,029 | 0,040 | 0,048 | 0,056 | 0,063 | 0,070 | 0,076 | 0,081 | 0,091 |
M | 3 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 60 | 65 | 70 | fz | 0,012 | 0,016 | 0,020 | 0,025 | 0,034 | 0,040 | 0,047 | 0,052 | 0,057 | 0,061 | 0,065 | 0,071 |
K | 1 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 120 | 135 | 150 | fz | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
K | 2 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 110 | 125 | 140 | fz | 0,017 | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
K | 3 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 110 | 120 | 130 | fz | 0,014 | 0,019 | 0,024 | 0,029 | 0,040 | 0,048 | 0,056 | 0,063 | 0,070 | 0,076 | 0,081 | 0,091 |
S | 1 | Ap1 Max | 0,4 x D1 | 0,3 x D1 | 50 | 70 | 90 | fz | 0,017 | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
S | 2 | Ap1 Max | 0,4 x D1 | 0,3 x D1 | 25 | 30 | 40 | fz | 0,009 | 0,013 | 0,016 | 0,019 | 0,026 | 0,032 | 0,037 | 0,042 | 0,046 | 0,050 | 0,054 | 0,061 |
S | 3 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 25 | 30 | 40 | fz | 0,009 | 0,013 | 0,016 | 0,019 | 0,026 | 0,032 | 0,037 | 0,042 | 0,046 | 0,050 | 0,054 | 0,061 |
S | 4 | Ap1 Max | 0,4 x D1 | 1,0 x D1 | 50 | 55 | 60 | fz | 0,011 | 0,016 | 0,021 | 0,026 | 0,037 | 0,045 | 0,052 | 0,058 | 0,064 | 0,069 | 0,074 | 0,084 |
H | 1 | Ap1 Max | 0,4 x D1 | 0,75 x D1 | 80 | 110 | 140 | fz | 0,016 | 0,021 | 0,027 | 0,033 | 0,045 | 0,054 | 0,062 | 0,070 | 0,077 | 0,083 | 0,088 | 0,098 |
H | 2 | Ap1 Max | 0,4 x D1 | 0,5 x D1 | 70 | 90 | 120 | fz | 0,012 | 0,016 | 0,020 | 0,025 | 0,034 | 0,040 | 0,047 | 0,052 | 0,057 | 0,061 | 0,065 | 0,071 |
WU20PE | Recommended feed per tooth (fz = mm/z) for side milling. No Slotting operations recommended. | ||||||||||||||||||
Frezowanie walcowe | Prędkość skrawania Vc m/min | D1 Średnica | |||||||||||||||||
Grupa materiałowa | ap | ae | min. | Początek | maks. | mm | 3,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | |
P | 0 | Ap1 Max | 0,2 x D1 | 150 | 175 | 200 | fz | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
P | 1 | Ap1 Max | 0,2 x D1 | 150 | 175 | 200 | fz | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
P | 2 | Ap1 Max | 0,2 x D1 | 140 | 165 | 190 | fz | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
P | 3 | Ap1 Max | 0,2 x D1 | 120 | 140 | 160 | fz | 0,017 | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
P | 4 | Ap1 Max | 0,2 x D1 | 90 | 120 | 150 | fz | 0,016 | 0,021 | 0,027 | 0,033 | 0,045 | 0,054 | 0,062 | 0,070 | 0,077 | 0,083 | 0,088 | 0,098 |
P | 5 | Ap1 Max | 0,2 x D1 | 60 | 80 | 100 | fz | 0,014 | 0,019 | 0,024 | 0,029 | 0,040 | 0,048 | 0,056 | 0,063 | 0,070 | 0,076 | 0,081 | 0,091 |
P | 6 | Ap1 Max | 0,15 x D1 | 50 | 65 | 75 | fz | 0,012 | 0,016 | 0,020 | 0,025 | 0,034 | 0,040 | 0,047 | 0,052 | 0,057 | 0,061 | 0,065 | 0,071 |
M | 1 | Ap1 Max | 0,2 x D1 | 90 | 100 | 115 | fz | 0,017 | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
M | 2 | Ap1 Max | 0,2 x D1 | 60 | 70 | 80 | fz | 0,014 | 0,019 | 0,024 | 0,029 | 0,040 | 0,048 | 0,056 | 0,063 | 0,070 | 0,076 | 0,081 | 0,091 |
M | 3 | Ap1 Max | 0,2 x D1 | 60 | 65 | 70 | fz | 0,012 | 0,016 | 0,020 | 0,025 | 0,034 | 0,040 | 0,047 | 0,052 | 0,057 | 0,061 | 0,065 | 0,071 |
K | 1 | Ap1 Max | 0,2 x D1 | 120 | 135 | 150 | fz | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | 0,124 |
K | 2 | Ap1 Max | 0,2 x D1 | 110 | 125 | 140 | fz | 0,017 | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
K | 3 | Ap1 Max | 0,2 x D1 | 110 | 120 | 130 | fz | 0,014 | 0,019 | 0,024 | 0,029 | 0,040 | 0,048 | 0,056 | 0,063 | 0,070 | 0,076 | 0,081 | 0,091 |
S | 1 | Ap1 Max | 0,1 x D1 | 50 | 70 | 90 | fz | 0,017 | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | 0,114 |
S | 2 | Ap1 Max | 0,1 x D1 | 25 | 30 | 40 | fz | 0,009 | 0,013 | 0,016 | 0,019 | 0,026 | 0,032 | 0,037 | 0,042 | 0,046 | 0,050 | 0,054 | 0,061 |
S | 3 | Ap1 Max | 0,15 x D1 | 25 | 30 | 40 | fz | 0,009 | 0,013 | 0,016 | 0,019 | 0,026 | 0,032 | 0,037 | 0,042 | 0,046 | 0,050 | 0,054 | 0,061 |
S | 4 | Ap1 Max | 0,15 x D1 | 50 | 55 | 60 | fz | 0,011 | 0,016 | 0,021 | 0,026 | 0,037 | 0,045 | 0,052 | 0,058 | 0,064 | 0,069 | 0,074 | 0,084 |
H | 1 | Ap1 Max | 0,15 x D1 | 80 | 110 | 140 | fz | 0,016 | 0,021 | 0,027 | 0,033 | 0,045 | 0,054 | 0,062 | 0,070 | 0,077 | 0,083 | 0,088 | 0,098 |
H | 2 | Ap1 Max | 0,15 x D1 | 70 | 90 | 120 | fz | 0,012 | 0,016 | 0,020 | 0,025 | 0,034 | 0,040 | 0,047 | 0,052 | 0,057 | 0,061 | 0,065 | 0,071 |
WU20PE | Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%. | |||||||||||||||||
Frezowanie walcowe | Frezowanie rowków | Prędkość skrawania Vc m/min | D1 Średnica | |||||||||||||||
Grupa materiałowa | ap | ae | ap | min. | Początek | maks. | frac. | 3/16 | 1/4 | 5/16 | 3/8 | 7/16 | 1/2 | 5/8 | 3/4 | 1 | 1 1/4 | |
cale | 0.1875 | 0.2500 | 0.3125 | 0.3750 | 0.4375 | 0.5000 | 0.6250 | 0.7500 | 1.0000 | 1.2500 | ||||||||
P | 0 | ap1max | 0.4 x D | 0.3 x D | 490 | – | 660 | IPT | 0.0013 | 0.0018 | 0.0023 | 0.0027 | 0.0031 | 0.0034 | 0.0039 | 0.0044 | 0.0049 | 0.0049 |
P | 1 | ap1max | 0.4 x D | 0.3 x D | 490 | – | 660 | IPT | 0.0013 | 0.0018 | 0.0023 | 0.0027 | 0.0031 | 0.0034 | 0.0039 | 0.0044 | 0.0049 | 0.0049 |
P | 2 | ap1max | 0.4 x D | 0.3 x D | 460 | – | 620 | IPT | 0.0013 | 0.0018 | 0.0023 | 0.0027 | 0.0031 | 0.0034 | 0.0039 | 0.0044 | 0.0049 | 0.0049 |
P | 3 | ap1max | 0.4 x D | 0.3 x D | 390 | – | 520 | IPT | 0.0011 | 0.0015 | 0.0020 | 0.0023 | 0.0026 | 0.0029 | 0.0034 | 0.0039 | 0.0045 | 0.0048 |
P | 4 | ap1max | 0.4 x D | 0.3 x D | 300 | – | 490 | IPT | 0.0010 | 0.0014 | 0.0017 | 0.0020 | 0.0023 | 0.0026 | 0.0030 | 0.0034 | 0.0039 | 0.0040 |
P | 5 | ap1max | 0.4 x D | 0.3 x D | 200 | – | 330 | IPT | 0.0009 | 0.0012 | 0.0016 | 0.0018 | 0.0021 | 0.0023 | 0.0027 | 0.0031 | 0.0036 | 0.0039 |
P | 6 | ap1max | 0.4 x D | 0.3 x D | 160 | – | 250 | IPT | 0.0008 | 0.0010 | 0.0013 | 0.0015 | 0.0017 | 0.0019 | 0.0022 | 0.0025 | 0.0028 | 0.0029 |
M | 1 | ap1max | 0.4 x D | 0.3 x D | 300 | – | 380 | IPT | 0.0011 | 0.0015 | 0.0020 | 0.0023 | 0.0026 | 0.0029 | 0.0034 | 0.0039 | 0.0045 | 0.0048 |
M | 2 | ap1max | 0.4 x D | 0.3 x D | 200 | – | 260 | IPT | 0.0009 | 0.0012 | 0.0016 | 0.0018 | 0.0021 | 0.0023 | 0.0027 | 0.0031 | 0.0036 | 0.0039 |
M | 3 | ap1max | 0.4 x D | 0.3 x D | 200 | – | 230 | IPT | 0.0008 | 0.0010 | 0.0013 | 0.0015 | 0.0017 | 0.0019 | 0.0022 | 0.0025 | 0.0028 | 0.0029 |
K | 1 | ap1max | 0.4 x D | 0.3 x D | 390 | – | 490 | IPT | 0.0013 | 0.0018 | 0.0023 | 0.0027 | 0.0031 | 0.0034 | 0.0039 | 0.0044 | 0.0049 | 0.0049 |
K | 2 | ap1max | 0.4 x D | 0.3 x D | 360 | – | 460 | IPT | 0.0011 | 0.0015 | 0.0020 | 0.0023 | 0.0026 | 0.0029 | 0.0034 | 0.0039 | 0.0045 | 0.0048 |
K | 3 | ap1max | 0.4 x D | 0.3 x D | 360 | – | 430 | IPT | 0.0009 | 0.0012 | 0.0016 | 0.0018 | 0.0021 | 0.0023 | 0.0027 | 0.0031 | 0.0036 | 0.0039 |
S | 1 | ap1max | 0.3 x D | 0.2 x D | 160 | – | 300 | IPT | 0.0011 | 0.0015 | 0.0020 | 0.0023 | 0.0026 | 0.0029 | 0.0034 | 0.0039 | 0.0045 | 0.0048 |
S | 2 | ap1max | 0.3 x D | 0.2 x D | 80 | – | 130 | IPT | 0.0006 | 0.0008 | 0.0010 | 0.0012 | 0.0014 | 0.0015 | 0.0018 | 0.0021 | 0.0024 | 0.0026 |
S | 3 | ap1max | 0.4 x D | 0.3 x D | 200 | – | 260 | IPT | 0.0009 | 0.0012 | 0.0016 | 0.0018 | 0.0021 | 0.0023 | 0.0027 | 0.0031 | 0.0036 | 0.0039 |
S | 4 | ap1max | 0.4 x D | 0.3 x D | 160 | – | 200 | IPT | 0.0008 | 0.0011 | 0.0014 | 0.0017 | 0.0019 | 0.0021 | 0.0025 | 0.0028 | 0.0033 | 0.0036 |
H | 1 | ap1max | 0.4 x D | 0.3 x D | 260 | – | 460 | IPT | 0.0010 | 0.0014 | 0.0017 | 0.0020 | 0.0023 | 0.0026 | 0.0030 | 0.0034 | 0.0039 | 0.0040 |
H | 2 | ap1max | 0.2 x D | 0.3 x D | 230 | – | 390 | IPT | 0.0008 | 0.0010 | 0.0013 | 0.0015 | 0.0017 | 0.0019 | 0.0022 | 0.0025 | 0.0028 | 0.0029 |
WU20PE | Recommended feed per tooth (Fz = IPT) for side milling (A). For slotting (B), reduce Fz by 20%. | |||||||||||||||||
Frezowanie walcowe | Frezowanie rowków | Prędkość skrawania Vc SFM | D1 Średnica | |||||||||||||||
Grupa materiałowa | ap | ae | ap | min. | Początek | maks. | ułamek | 1/8 | 3/16 | 1/4 | 5/16 | 3/8 | 7/16 | 1/2 | 5/8 | 3/4 | 1 | |
P | 0 | ap1max | 0.4 x D1 | 1.0 x D1 | 490 | 580 | 660 | IPT | .0009 | .0013 | .0018 | .0023 | .0027 | .0031 | .0034 | .0039 | .0044 | .0049 |
P | 1 | ap1max | 0.4 x D1 | 1.0 x D1 | 490 | 580 | 660 | IPT | .0009 | .0013 | .0018 | .0023 | .0027 | .0031 | .0034 | .0039 | .0044 | .0049 |
P | 2 | ap1max | 0.4 x D1 | 1.0 x D1 | 460 | 540 | 620 | IPT | .0009 | .0013 | .0018 | .0023 | .0027 | .0031 | .0034 | .0039 | .0044 | .0049 |
P | 3 | ap1max | 0.4 x D1 | 1.0 x D1 | 390 | 450 | 520 | IPT | .0007 | .0011 | .0015 | .0020 | .0023 | .0026 | .0029 | .0034 | .0039 | .0045 |
P | 4 | ap1max | 0.4 x D1 | 0.75 x D1 | 300 | 400 | 490 | IPT | .0007 | .0010 | .0014 | .0017 | .0020 | .0023 | .0026 | .0030 | .0034 | .0039 |
P | 5 | ap1max | 0.4 x D1 | 1.0 x D1 | 200 | 260 | 330 | IPT | .0006 | .0009 | .0012 | .0017 | .0018 | .0021 | .0023 | .0027 | .0031 | .0036 |
P | 6 | ap1max | 0.4 x D1 | 0.75 x D1 | 160 | 200 | 250 | IPT | .0005 | .0008 | .0010 | .0013 | .0015 | .0017 | .0019 | .0022 | .0025 | .0028 |
M | 1 | ap1max | 0.4 x D1 | 1.0 x D1 | 300 | 340 | 380 | IPT | .0007 | .0011 | .0015 | .0020 | .0023 | .0026 | .0029 | .0034 | .0039 | .0045 |
M | 2 | ap1max | 0.4 x D1 | 1.0 x D1 | 200 | 230 | 260 | IPT | .0006 | .0009 | .0012 | .0016 | .0018 | .0021 | .0023 | .0027 | .0031 | .0036 |
M | 3 | ap1max | 0.4 x D1 | 1.0 x D1 | 200 | 210 | 230 | IPT | .0005 | .00008 | .0010 | .0013 | .0015 | .0017 | .0019 | .0022 | .0025 | .0028 |
K | 1 | ap1max | 0.4 x D1 | 1.0 x D1 | 390 | 440 | 490 | IPT | .0009 | .0013 | .0018 | .0023 | .0027 | .0031 | .0034 | .0039 | .0044 | .0049 |
K | 2 | ap1max | 0.4 x D1 | 1.0 x D1 | 360 | 410 | 460 | IPT | .0007 | .0011 | .0015 | .0020 | .0023 | .0026 | .0029 | .0034 | .0039 | .0045 |
K | 3 | ap1max | 0.4 x D1 | 1.0 x D1 | 360 | 390 | 430 | IPT | .0006 | .0009 | .0012 | .0016 | .0018 | .0021 | .0023 | .0027 | .0031 | .0036 |
S | 1 | ap1max | 0.4 x D1 | 0.3 x D1 | 160 | 230 | 300 | IPT | .0007 | .0011 | .0015 | .0020 | .0023 | .0026 | .0029 | .0034 | .0039 | .0045 |
S | 2 | ap1max | 0.4 x D1 | 0.3 x D1 | 80 | 105 | 130 | IPT | .0004 | .0006 | .0008 | .0010 | .0012 | .0014 | .0015 | .0018 | .0021 | .0024 |
S | 3 | ap1max | 0.4 x D1 | 1.0 x D1 | 80 | 105 | 130 | IPT | .0004 | .0006 | .0008 | .0010 | .0012 | .0014 | .0015 | .0018 | .0021 | .0024 |
S | 4 | ap1max | 0.4 x D1 | 1.0 x D1 | 160 | 180 | 200 | IPT | .0005 | .0008 | .0011 | .0014 | .0017 | .0019 | .0021 | .0025 | .0028 | .0033 |
H | 1 | ap1max | 0.4 x D1 | 0.75 x D1 | 260 | 360 | 460 | IPT | .0007 | .0010 | .0014 | .0017 | .0020 | .0023 | .0026 | .0030 | .0034 | .0039 |
H | 2 | ap1max | 0.4 x D1 | 0.5 x D1 | 230 | 310 | 390 | IPT | .0005 | .0008 | .0010 | .0013 | .0015 | .0017 | .0019 | .0022 | .0025 | .0028 |