successfully added to cart
View Cart

Notifications

Mark all as read

TopGroove™

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Select First Choice
  • DE (10)
  • IN (2)
  • US (181)
Applications
  • Boring Boring (3)
  • Face Grooving Face Grooving (425)
  • Grooving Grooving (421)
  • ID Grooving ID Grooving (305)
  • ID Thread Turning ID Thread Turning (44)
  • OD Thread Turning OD Thread Turning (66)
  • Plunge Turning Plunge Turning (264)
  • Profiling Profiling (82)
  • Threading Threading (67)
  • Turning Turning (3)
Workpiece Material
  • P Steel (462)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (462)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (462)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (462)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (462)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (462)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (462)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (462)
  • M Stainless Steel (474)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (474)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (474)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (474)
  • K Cast Iron (473)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (473)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (473)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (473)
  • N Non-Ferrous Materials (474)
    • N1
      Wrought Aluminum
      (474)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (474)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (474)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (94)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (474)
    • N6
      Carbon, Graphite Composites, CFRP
      (474)
    • N7
      MMC's
      (94)
  • S High-Temp Alloys (474)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (474)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (474)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (474)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (474)
  • H Hardened Materials (35)
    • H1
      Hardened Materials 44-48 HRC
      (35)
    • H2
      Hardened Materials 48-55 HRC
      (35)
Type of Thread
  • 60 (106)
  • ACME (65)
  • API RD (44)
  • BSW (23)
  • BUTTRESS (21)
  • STUB ACME (44)
  • UN (92)
  • UNJ (23)
Cutting Condition
  • Heavily Interrupted Cut (449)
  • Lightly Interrupted Cut (449)
  • Smooth Cut (465)
  • Varying Depth of Cut (457)
Cutting Condition Material
  • H-All (325)
  • K-All (465)
  • M-All (465)
  • N-All (465)
  • P-All (459)
  • S-All (465)
Tool Cutting Edge Angle
  • 90.0 (110)
to
Connection Style
  • Boring Bar Shank (44)
  • Toolholder (47)
Cutting Edges Per Insert
  • 1.0 (173)
  • 2.0 (402)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.076 (72)
  • 0.089 (55)
  • 0.09 (52)
  • 0.1 (39)
  • 0.102 (60)
  • 0.16 (9)
  • 0.165 (62)
  • 0.185 (36)
  • 0.19 (165)
  • 0.191 (211)
  • 0.198 (23)
  • 0.2 (46)
  • 0.224 (23)
  • 0.235 (23)
  • 0.254 (51)
  • 0.3 (23)
  • 0.315 (64)
  • 0.318 (55)
  • 0.33 (23)
  • 0.34 (23)
  • 0.356 (21)
  • 0.43 (44)
  • 0.5 (43)
  • 0.565 (10)
  • 0.57 (23)
  • 0.572 (91)
  • 0.575 (46)
  • 0.75 (43)
  • 0.787 (99)
  • 1.0 (90)
  • 1.194 (91)
  • 1.195 (23)
  • 1.25 (86)
  • 1.5 (89)
  • 1.585 (48)
  • 1.588 (74)
  • 1.59 (10)
  • 1.75 (87)
  • 1.98 (23)
  • 1.981 (24)
  • 2.0 (66)
  • 2.25 (64)
  • 2.388 (67)
  • 2.5 (20)
  • 3.175 (23)
  • 3.18 (10)
to
Corner Radius
  • 0.003 (72)
  • 0.0035 (68)
  • 0.004 (60)
  • 0.0065 (62)
  • 0.0075 (288)
  • 0.0078 (23)
  • 0.008 (46)
  • 0.0088 (23)
  • 0.0093 (23)
  • 0.01 (51)
  • 0.0118 (23)
  • 0.0125 (75)
  • 0.013 (23)
  • 0.0135 (23)
  • 0.014 (21)
  • 0.017 (44)
  • 0.0197 (43)
  • 0.0225 (99)
  • 0.0295 (43)
  • 0.031 (99)
  • 0.0394 (90)
  • 0.047 (93)
  • 0.0492 (86)
  • 0.0591 (89)
  • 0.0625 (79)
  • 0.0689 (87)
  • 0.078 (47)
  • 0.0787 (66)
  • 0.0886 (64)
  • 0.094 (67)
  • 0.0984 (20)
  • 0.125 (24)
to
Application
Drilling Condition
  • Heavily Interrupted Cut (348)
  • Lightly Interrupted Cut (348)
  • Smooth Cut (359)
  • Varying Depth of Cut (356)
Drilling Condition Material
  • H-All (224)
  • K-All (359)
  • M-All (359)
  • N-All (359)
  • P-All (353)
  • S-All (359)
Grade Of Cutting Tool
  • THM (94)
  • TN10P (69)
  • TN6010 (230)
  • TN6025 (336)
  • TN7110 (101)
  • WU10HT (24)
  • WU10PT (35)
  • WU25PT (22)
Hand Of Tool
  • L (34)
  • R (57)
Minimum Axial Groove Diameter
  • 0.0 (54)
  • 0.44 (2)
  • 0.453 (2)
  • 0.728 (2)
  • 0.73 (2)
  • 0.8 (1)
  • 0.8661 (2)
  • 1.0 (2)
  • 1.0236 (2)
  • 1.125 (2)
  • 1.339 (4)
  • 1.375 (4)
  • 1.626 (28)
  • 1.7323 (2)
  • 1.75 (2)
  • 1.874 (26)
  • 2.0 (2)
  • 2.126 (3)
  • 2.2 (1)
  • 2.229 (3)
  • 2.25 (3)
  • 2.252 (12)
  • 2.375 (2)
  • 2.5 (7)
  • 2.75 (2)
  • 2.7559 (1)
  • 3.0 (1)
  • 3.5 (139)
  • 5.5 (164)
  • 6.874 (56)
  • 8.252 (43)
  • 8.752 (26)
to
Minimum Axial Groove Diameter
  • 0.0 (54)
  • 11.176 (2)
  • 11.5 (2)
  • 18.5 (2)
  • 18.542 (2)
  • 20.32 (1)
  • 22.0 (2)
  • 25.4 (2)
  • 26.0 (2)
  • 28.575 (1)
  • 28.58 (1)
  • 34.0 (4)
  • 34.92 (2)
  • 34.925 (2)
  • 41.3 (28)
  • 44.0 (2)
  • 44.45 (2)
  • 47.6 (26)
  • 50.8 (2)
  • 54.0 (3)
  • 55.88 (1)
  • 56.625 (3)
  • 57.15 (3)
  • 57.2 (12)
  • 60.325 (2)
  • 63.5 (7)
  • 69.85 (2)
  • 70.0 (1)
  • 76.2 (1)
  • 88.9 (139)
  • 139.7 (164)
  • 174.6 (56)
  • 209.6 (43)
  • 222.3 (26)
to
Maximum Axial Groove Diameter
  • 9999.0 (470)
to
Maximum Axial Groove Diameter
  • 393.661 (470)
to
Cutting Direction
  • E (51)
  • S (40)
Rake Angle Style
  • NEUTRAL (ZERO) (91)
Maximum Bore Depth
  • 25.4 (7)
  • 31.26 (1)
  • 31.3 (1)
  • 32.766 (1)
  • 38.1 (1)
  • 48.0 (2)
  • 50.8 (14)
  • 63.5 (3)
  • 64.0 (2)
  • 76.2 (2)
  • 80.0 (2)
  • 100.0 (4)
  • 101.6 (6)
  • 127.0 (3)
  • 128.0 (2)
  • 152.4 (2)
  • 160.0 (3)
  • 177.8 (2)
  • 200.0 (1)
  • 203.2 (4)
to
Maximum Bore Depth
  • 1.0 (7)
  • 1.231 (1)
  • 1.2323 (1)
  • 1.29 (1)
  • 1.5 (1)
  • 1.88 (2)
  • 2.0 (14)
  • 2.5 (3)
  • 2.5196 (1)
  • 2.52 (1)
  • 3.0 (2)
  • 3.148 (1)
  • 3.1496 (1)
  • 3.92 (2)
  • 3.936 (2)
  • 4.0 (6)
  • 5.0 (3)
  • 5.0392 (2)
  • 6.0 (2)
  • 6.2992 (3)
  • 7.0 (2)
  • 7.874 (1)
  • 8.0 (4)
to
Boring Bar Material
  • S (44)
Wiper Insert
  • N (474)
Front-End
Clamp Style
  • N (110)
Cutting Width
  • 0.5 (42)
  • 0.787 (46)
  • 0.8 (43)
  • 1.0 (92)
  • 1.041 (24)
  • 1.19 (40)
  • 1.194 (81)
  • 1.2 (89)
  • 1.4 (43)
  • 1.473 (41)
  • 1.5 (96)
  • 1.56 (25)
  • 1.57 (69)
  • 1.575 (116)
  • 1.7 (42)
  • 1.75 (87)
  • 1.829 (46)
  • 1.95 (43)
  • 1.981 (48)
  • 2.0 (108)
  • 2.2 (87)
  • 2.24 (25)
  • 2.25 (64)
  • 2.388 (113)
  • 2.39 (26)
  • 2.5 (98)
  • 2.75 (89)
  • 3.0 (124)
  • 3.17 (48)
  • 3.175 (140)
  • 3.18 (10)
  • 3.2 (46)
  • 3.245 (41)
  • 3.25 (45)
  • 3.5 (110)
  • 3.73 (25)
  • 3.84 (41)
  • 3.96 (25)
  • 3.962 (47)
  • 3.974 (24)
  • 4.0 (76)
  • 4.24 (21)
  • 4.25 (24)
  • 4.5 (69)
  • 4.775 (47)
  • 4.785 (9)
  • 4.788 (11)
  • 4.8 (48)
  • 4.801 (76)
  • 4.88 (25)
  • 4.95 (46)
  • 5.0 (22)
  • 5.5 (19)
  • 6.0 (19)
  • 6.35 (30)
  • 6.36 (10)
to
Cutting Width
  • 0.0197 (42)
  • 0.031 (46)
  • 0.0315 (43)
  • 0.0394 (92)
  • 0.041 (24)
  • 0.047 (100)
  • 0.0472 (89)
  • 0.0551 (43)
  • 0.058 (41)
  • 0.0591 (96)
  • 0.062 (127)
  • 0.0669 (42)
  • 0.0689 (87)
  • 0.072 (46)
  • 0.0768 (43)
  • 0.078 (48)
  • 0.0787 (108)
  • 0.0866 (87)
  • 0.088 (25)
  • 0.0886 (64)
  • 0.094 (118)
  • 0.0984 (98)
  • 0.1083 (89)
  • 0.1181 (124)
  • 0.125 (145)
  • 0.126 (46)
  • 0.1278 (41)
  • 0.128 (45)
  • 0.1378 (110)
  • 0.147 (25)
  • 0.151 (41)
  • 0.156 (52)
  • 0.1574 (67)
  • 0.1575 (71)
  • 0.167 (21)
  • 0.1673 (24)
  • 0.1771 (66)
  • 0.1772 (65)
  • 0.188 (67)
  • 0.189 (80)
  • 0.192 (25)
  • 0.195 (46)
  • 0.1969 (22)
  • 0.2165 (19)
  • 0.2166 (9)
  • 0.2362 (19)
  • 0.25 (31)
to
Insert Size
  • 1 (6)
  • 2 (41)
  • 3 (46)
  • 4 (15)
  • 6 (2)
Maximum Cutting Depth
  • 1.69 (1)
  • 3.505 (12)
  • 3.51 (11)
  • 5.33 (8)
  • 5.334 (19)
  • 5.715 (1)
  • 7.468 (8)
  • 7.47 (5)
  • 8.484 (2)
to
Maximum Cutting Depth
  • 0.067 (1)
  • 0.138 (14)
  • 0.1382 (9)
  • 0.2098 (8)
  • 0.21 (19)
  • 0.225 (1)
  • 0.294 (8)
  • 0.2941 (5)
  • 0.334 (2)
to
Maximum Cutting Insert Depth
  • 0.025 (3)
  • 0.03 (30)
  • 0.04 (57)
  • 0.043 (42)
  • 0.075 (2)
  • 0.078 (4)
  • 0.1 (3)
  • 0.108 (2)
  • 0.115 (32)
  • 0.15 (10)
  • 0.151 (2)
  • 0.1522 (1)
  • 0.4 (1)
to
Maximum Cutting Insert Depth
  • 0.64 (3)
  • 0.76 (3)
  • 0.762 (27)
  • 1.015 (2)
  • 1.016 (49)
  • 1.02 (4)
  • 1.061 (3)
  • 1.09 (7)
  • 1.092 (35)
  • 1.905 (2)
  • 1.97 (2)
  • 1.981 (2)
  • 2.54 (3)
  • 2.75 (2)
  • 2.92 (9)
  • 2.921 (23)
  • 3.81 (10)
  • 3.84 (2)
  • 3.865 (1)
to
Insert Geometry
Shape
  • TN-TOP NOTCH (365)
Insert Seat Size
  • 1 (3)
  • 2 (119)
  • 3 (192)
  • 4 (51)
Cutting Tool Material
  • H W (474)
Back-End
Connection Type
  • BORING BAR (44)
  • SQUARE SHANK (47)
Back-End Diameter
  • 0.375 (1)
  • 0.394 (1)
  • 0.47 (3)
  • 0.5 (3)
  • 0.625 (3)
  • 0.6299 (1)
  • 0.63 (1)
  • 0.75 (2)
  • 0.787 (1)
  • 0.7874 (1)
  • 0.98 (2)
  • 0.984 (2)
  • 1.0 (6)
  • 1.25 (3)
  • 1.2598 (2)
  • 1.5 (2)
  • 1.5748 (3)
  • 1.75 (2)
  • 1.9685 (1)
  • 2.0 (4)
to
Back-End Diameter
  • 9.525 (1)
  • 10.0 (1)
  • 12.0 (3)
  • 12.7 (3)
  • 15.875 (3)
  • 16.0 (2)
  • 19.05 (2)
  • 20.0 (2)
  • 25.0 (4)
  • 25.4 (6)
  • 31.75 (3)
  • 32.0 (2)
  • 38.1 (2)
  • 40.0 (3)
  • 44.45 (2)
  • 50.0 (1)
  • 50.8 (4)
to
other
Grade
  • THM (11)
  • TN6010 (124)
  • TN6025 (227)
  • W (110)
  • WU10HT (1)
  • WU10PT (1)
  • WU25PT (1)
Platform
  • TopGroove (365)
  • TopThread TopGroove (110)
Tool Unit
  • I (432)
  • M (406)
Over All Length [L]
  • 63.5 (1)
  • 80.0 (1)
  • 88.9 (1)
  • 100.0 (1)
  • 101.6 (2)
  • 114.3 (9)
  • 125.0 (8)
  • 127.0 (9)
  • 150.0 (18)
  • 152.4 (21)
  • 170.0 (2)
  • 180.0 (2)
  • 200.0 (4)
  • 203.2 (3)
  • 250.0 (2)
  • 254.0 (5)
  • 300.0 (3)
  • 304.8 (6)
  • 350.0 (1)
  • 355.6 (7)
  • 406.4 (4)
to
Over All Length [L]
  • 2.5 (1)
  • 3.15 (1)
  • 3.5 (1)
  • 3.937 (1)
  • 4.0 (2)
  • 4.5 (9)
  • 4.921 (1)
  • 4.9213 (7)
  • 5.0 (9)
  • 5.905 (1)
  • 5.9055 (14)
  • 5.906 (3)
  • 6.0 (21)
  • 6.6929 (2)
  • 7.0866 (2)
  • 7.874 (4)
  • 8.0 (3)
  • 9.8425 (2)
  • 10.0 (5)
  • 11.811 (3)
  • 12.0 (6)
  • 13.7795 (1)
  • 14.0 (7)
  • 16.0 (4)
to
Insert Hand
  • L (225)
  • R (249)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

TopThread™

Toolholders
(30 Products)
  • Face GroovingFace Grooving
  • GroovingGrooving
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Insert Size [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth Gage Insert Clamp Screw ID Drive Size
3632138 NSL162C NSL162C   W 2 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 19.050 .7500 8.8900 .3500 3.5050