Cut-Off Inserts
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
Workpiece Material
-
P Steel (11)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (11)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (11)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (11)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (11)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (11)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (11)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (11)
-
-
M Stainless Steel (11)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (11)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (11)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (11)
-
-
K Cast Iron (11)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (11)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (11)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (11)
-
-
N Non-Ferrous Materials (11)
-
N1Wrought Aluminum (11)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (11)
-
N3High-Silicon Aluminum Alloys Si >12.2% (11)
-
N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (11)
-
N6Carbon, Graphite Composites, CFRP (11)
-
-
S High-Temp Alloys (11)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (11)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (11)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (11)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (11)
-
Corner Radius
Corner Radius
-
0.006 in (2)
-
0.007 in (1)
-
0.01 in (6)
-
0.011 in (1)
-
0.014 in (1)
to
Corner Radius
Corner Radius
-
0.151 mm (2)
-
0.176 mm (1)
-
0.225 mm (2)
-
0.25 mm (4)
-
0.275 mm (1)
-
0.351 mm (1)
to
Front-End
Cutting Width
Cutting Width
-
0.088 in (1)
-
0.089 in (1)
-
0.095 in (1)
-
0.119 in (1)
-
0.12 in (2)
-
0.159 in (1)
-
0.161 in (1)
-
0.189 in (1)
-
0.199 in (1)
-
0.252 in (1)
to
Cutting Width
Cutting Width
-
2.2 mm (1)
-
2.25 mm (1)
-
2.401 mm (1)
-
3.0 mm (1)
-
3.051 mm (2)
-
4.05 mm (1)
-
4.101 mm (1)
-
4.801 mm (1)
-
5.051 mm (1)
-
6.4 mm (1)
to
Insert Geometry
Insert Seat Size
Insert Seat Size
-
2 (3)
-
3 (3)
-
4 (3)
-
5 (1)
-
6 (1)
No filters matching ""
