Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read

General Purpose End Mills

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (1537)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1537)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1537)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1537)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1348)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1348)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (461)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (461)
  • M Stainless Steel (1348)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1348)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1348)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (461)
  • K Cast Iron (1348)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1348)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1348)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (470)
  • N Non-Ferrous Materials (877)
    • N1
      Wrought Aluminum
      (736)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (736)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (455)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (522)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (810)
    • N6
      Carbon, Graphite Composites, CFRP
      (455)
    • N7
      MMC's
      (454)
  • S High-Temp Alloys (461)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (461)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (461)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (461)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (461)
  • H Hardened Materials (461)
    • H1
      Hardened Materials 44-48 HRC
      (461)
    • H2
      Hardened Materials 48-55 HRC
      (456)
    • H3
      Hardened Materials 56-60 HRC
      (449)
    • H4
      Hardened Materials >60 HRC
      (449)
Select All Star
  • CN (228)
  • DE (311)
  • GB (142)
  • IN (148)
  • SG (206)
  • US (332)
Applications
Applications
  • Face Milling Face Milling (1173)
  • Pocket Pocket (1476)
  • Pocket Helical Pocket Helical (1476)
  • Pocket Milling Pocket Milling (1475)
  • Pocket Plunge Milling Pocket Plunge Milling (263)
  • Profile Milling Profile Milling (270)
  • Ramping Ramping (1520)
  • Shoulder Ball Nose Shoulder Ball Nose (270)
  • Shoulder Milling Shoulder Milling (1476)
  • Shoulder Roughing Shoulder Roughing (959)
  • Shoulder Square End Shoulder Square End (1249)
  • Slot Ball Nose Slot Ball Nose (270)
  • Slot Milling Slot Milling (886)
  • Slot Square End Slot Square End (665)
Cutting Diameter
Cutting Diameter
  • 0.016 in (2)
  • 0.031 in (8)
  • 0.039 in (7)
  • 0.047 in (2)
  • 0.06 in (7)
  • 0.063 in (17)
  • 0.072 in (1)
  • 0.078 in (7)
  • 0.079 in (26)
  • 0.094 in (20)
  • 0.098 in (16)
  • 0.109 in (5)
  • 0.119 in (53)
  • 0.125 in (38)
  • 0.138 in (13)
  • 0.142 in (3)
  • 0.156 in (10)
  • 0.157 in (73)
  • 0.173 in (2)
  • 0.177 in (20)
  • 0.187 in (4)
  • 0.188 in (34)
  • 0.197 in (67)
  • 0.203 in (2)
  • 0.217 in (14)
  • 0.219 in (8)
  • 0.234 in (2)
  • 0.237 in (88)
  • 0.25 in (45)
  • 0.256 in (2)
  • 0.266 in (2)
  • 0.276 in (25)
  • 0.281 in (5)
  • 0.295 in (2)
  • 0.297 in (1)
  • 0.313 in (35)
  • 0.315 in (81)
  • 0.328 in (1)
  • 0.345 in (4)
  • 0.354 in (15)
  • 0.359 in (1)
  • 0.375 in (45)
  • 0.391 in (1)
  • 0.394 in (81)
  • 0.408 in (3)
  • 0.422 in (1)
  • 0.433 in (2)
  • 0.438 in (17)
  • 0.453 in (1)
  • 0.47 in (3)
  • 0.473 in (102)
  • 0.484 in (1)
  • 0.5 in (51)
  • 0.551 in (62)
  • 0.564 in (19)
  • 0.591 in (2)
  • 0.625 in (49)
  • 0.63 in (87)
  • 0.687 in (2)
  • 0.689 in (1)
  • 0.709 in (43)
  • 0.75 in (53)
  • 0.787 in (74)
  • 0.814 in (1)
  • 0.875 in (27)
  • 1.0 in (40)
  • 1.25 in (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.4 mm (2)
  • 0.8 mm (8)
  • 1.0 mm (7)
  • 1.201 mm (2)
  • 1.5 mm (7)
  • 1.6 mm (17)
  • 1.8 mm (1)
  • 1.975 mm (7)
  • 2.0 mm (26)
  • 2.375 mm (20)
  • 2.5 mm (16)
  • 2.776 mm (5)
  • 3.0 mm (53)
  • 3.176 mm (38)
  • 3.5 mm (13)
  • 3.575 mm (3)
  • 3.975 mm (10)
  • 4.0 mm (73)
  • 4.375 mm (2)
  • 4.5 mm (20)
  • 4.75 mm (4)
  • 4.775 mm (34)
  • 5.0 mm (67)
  • 5.15 mm (2)
  • 5.5 mm (14)
  • 5.551 mm (8)
  • 5.95 mm (2)
  • 6.0 mm (88)
  • 6.351 mm (45)
  • 6.5 mm (2)
  • 6.75 mm (2)
  • 7.0 mm (25)
  • 7.15 mm (5)
  • 7.5 mm (2)
  • 7.551 mm (1)
  • 7.95 mm (35)
  • 8.0 mm (81)
  • 8.326 mm (1)
  • 8.725 mm (4)
  • 9.0 mm (15)
  • 9.125 mm (1)
  • 9.525 mm (45)
  • 9.925 mm (1)
  • 10.0 mm (81)
  • 10.326 mm (3)
  • 10.726 mm (1)
  • 11.0 mm (2)
  • 11.125 mm (17)
  • 11.5 mm (1)
  • 11.9 mm (3)
  • 12.0 mm (102)
  • 12.3 mm (1)
  • 12.701 mm (51)
  • 14.0 mm (62)
  • 14.3 mm (19)
  • 15.0 mm (2)
  • 15.875 mm (49)
  • 16.0 mm (87)
  • 17.45 mm (2)
  • 17.475 mm (1)
  • 18.0 mm (43)
  • 19.05 mm (53)
  • 20.0 mm (74)
  • 20.651 mm (1)
  • 22.225 mm (27)
  • 25.401 mm (40)
  • 31.75 mm (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.8 mm (2)
  • 1.0 mm (2)
  • 1.5 mm (2)
  • 1.975 mm (8)
  • 2.0 mm (2)
  • 2.776 mm (3)
  • 3.0 mm (8)
  • 3.176 mm (7)
  • 4.0 mm (30)
  • 4.75 mm (17)
  • 4.775 mm (1)
  • 5.0 mm (24)
  • 6.0 mm (14)
  • 6.301 mm (14)
  • 6.351 mm (8)
  • 7.0 mm (43)
  • 7.95 mm (8)
  • 8.0 mm (49)
  • 9.0 mm (9)
  • 9.5 mm (10)
  • 9.525 mm (18)
  • 10.0 mm (41)
  • 11.0 mm (31)
  • 11.101 mm (2)
  • 12.0 mm (23)
  • 12.701 mm (36)
  • 13.0 mm (36)
  • 14.0 mm (26)
  • 14.3 mm (12)
  • 15.0 mm (6)
  • 15.875 mm (43)
  • 16.0 mm (51)
  • 18.0 mm (12)
  • 19.0 mm (51)
  • 19.05 mm (56)
  • 20.0 mm (43)
  • 20.651 mm (20)
  • 22.0 mm (57)
  • 22.225 mm (5)
  • 24.0 mm (5)
  • 25.0 mm (29)
  • 25.401 mm (78)
  • 26.0 mm (54)
  • 28.0 mm (29)
  • 28.576 mm (26)
  • 30.0 mm (6)
  • 31.0 mm (12)
  • 31.75 mm (33)
  • 32.0 mm (79)
  • 34.926 mm (3)
  • 38.0 mm (41)
  • 38.1 mm (80)
  • 40.0 mm (4)
  • 41.0 mm (8)
  • 41.276 mm (5)
  • 44.45 mm (5)
  • 45.0 mm (29)
  • 46.0 mm (1)
  • 50.0 mm (7)
  • 50.801 mm (19)
  • 56.0 mm (23)
  • 57.151 mm (35)
  • 60.0 mm (2)
  • 64.0 mm (5)
  • 65.0 mm (1)
  • 75.0 mm (44)
  • 76.2 mm (30)
  • 101.601 mm (15)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.031 in (2)
  • 0.039 in (2)
  • 0.06 in (2)
  • 0.078 in (8)
  • 0.079 in (2)
  • 0.109 in (3)
  • 0.119 in (8)
  • 0.125 in (7)
  • 0.157 in (30)
  • 0.187 in (17)
  • 0.188 in (1)
  • 0.197 in (24)
  • 0.237 in (14)
  • 0.248 in (14)
  • 0.25 in (8)
  • 0.276 in (43)
  • 0.313 in (8)
  • 0.315 in (49)
  • 0.354 in (9)
  • 0.374 in (10)
  • 0.375 in (18)
  • 0.394 in (41)
  • 0.433 in (31)
  • 0.437 in (2)
  • 0.473 in (23)
  • 0.5 in (36)
  • 0.512 in (36)
  • 0.551 in (26)
  • 0.564 in (12)
  • 0.591 in (6)
  • 0.625 in (43)
  • 0.63 in (51)
  • 0.709 in (12)
  • 0.748 in (51)
  • 0.75 in (56)
  • 0.787 in (43)
  • 0.814 in (20)
  • 0.866 in (57)
  • 0.875 in (5)
  • 0.946 in (5)
  • 0.984 in (29)
  • 1.0 in (78)
  • 1.024 in (54)
  • 1.102 in (29)
  • 1.125 in (26)
  • 1.181 in (6)
  • 1.22 in (12)
  • 1.25 in (33)
  • 1.26 in (79)
  • 1.375 in (3)
  • 1.496 in (41)
  • 1.5 in (80)
  • 1.575 in (4)
  • 1.614 in (8)
  • 1.625 in (5)
  • 1.75 in (5)
  • 1.772 in (29)
  • 1.811 in (1)
  • 1.969 in (7)
  • 2.0 in (19)
  • 2.205 in (23)
  • 2.25 in (35)
  • 2.362 in (2)
  • 2.52 in (5)
  • 2.559 in (1)
  • 2.953 in (44)
  • 3.0 in (30)
  • 4.0 in (15)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.091 in (1)
  • 0.098 in (2)
  • 0.128 in (2)
  • 0.13 in (1)
  • 0.15 in (2)
  • 0.157 in (6)
  • 0.176 in (3)
  • 0.177 in (1)
  • 0.197 in (6)
  • 0.202 in (2)
  • 0.205 in (1)
  • 0.208 in (2)
  • 0.217 in (1)
  • 0.218 in (2)
  • 0.228 in (4)
  • 0.23 in (2)
  • 0.247 in (2)
  • 0.255 in (1)
  • 0.267 in (1)
  • 0.272 in (8)
  • 0.276 in (8)
  • 0.28 in (1)
  • 0.286 in (1)
  • 0.288 in (1)
  • 0.289 in (2)
  • 0.291 in (7)
  • 0.303 in (1)
  • 0.307 in (3)
  • 0.308 in (2)
  • 0.315 in (11)
  • 0.341 in (4)
  • 0.343 in (2)
  • 0.354 in (3)
  • 0.355 in (2)
  • 0.37 in (1)
  • 0.371 in (2)
  • 0.372 in (1)
  • 0.374 in (3)
  • 0.394 in (3)
  • 0.397 in (5)
  • 0.398 in (1)
  • 0.433 in (20)
  • 0.473 in (1)
  • 0.492 in (3)
  • 0.494 in (4)
  • 0.497 in (2)
  • 0.503 in (3)
  • 0.504 in (2)
  • 0.512 in (10)
  • 0.531 in (2)
  • 0.539 in (5)
  • 0.555 in (2)
  • 0.556 in (2)
  • 0.559 in (4)
  • 0.576 in (3)
  • 0.584 in (3)
  • 0.591 in (6)
  • 0.601 in (2)
  • 0.602 in (2)
  • 0.614 in (3)
  • 0.621 in (3)
  • 0.622 in (4)
  • 0.63 in (7)
  • 0.657 in (2)
  • 0.694 in (4)
  • 0.695 in (2)
  • 0.709 in (3)
  • 0.721 in (2)
  • 0.732 in (6)
  • 0.74 in (2)
  • 0.748 in (7)
  • 0.76 in (2)
  • 0.787 in (5)
  • 0.805 in (3)
  • 0.809 in (2)
  • 0.811 in (2)
  • 0.839 in (2)
  • 0.866 in (8)
  • 0.89 in (3)
  • 0.929 in (4)
  • 0.93 in (5)
  • 0.942 in (2)
  • 0.946 in (2)
  • 0.95 in (2)
  • 0.958 in (2)
  • 0.984 in (6)
  • 1.024 in (11)
  • 1.055 in (2)
  • 1.102 in (4)
  • 1.127 in (3)
  • 1.22 in (2)
  • 1.26 in (15)
  • 1.496 in (11)
  • 1.539 in (2)
  • 1.6 in (2)
  • 1.614 in (2)
  • 1.772 in (5)
  • 1.969 in (2)
  • 2.205 in (5)
  • 2.953 in (11)
Reach Min to Reach Max
Reach
Reach
  • 2.301 mm (1)
  • 2.5 mm (2)
  • 3.25 mm (2)
  • 3.301 mm (1)
  • 3.801 mm (2)
  • 4.0 mm (6)
  • 4.476 mm (3)
  • 4.5 mm (1)
  • 5.0 mm (6)
  • 5.125 mm (2)
  • 5.176 mm (1)
  • 5.25 mm (2)
  • 5.5 mm (1)
  • 5.525 mm (2)
  • 5.801 mm (4)
  • 5.851 mm (2)
  • 6.275 mm (2)
  • 6.476 mm (1)
  • 6.775 mm (1)
  • 6.9 mm (8)
  • 7.0 mm (8)
  • 7.101 mm (1)
  • 7.25 mm (1)
  • 7.301 mm (1)
  • 7.351 mm (2)
  • 7.4 mm (7)
  • 7.7 mm (1)
  • 7.801 mm (3)
  • 7.825 mm (2)
  • 8.0 mm (11)
  • 8.65 mm (4)
  • 8.701 mm (2)
  • 9.0 mm (3)
  • 9.025 mm (2)
  • 9.4 mm (1)
  • 9.425 mm (2)
  • 9.451 mm (1)
  • 9.5 mm (3)
  • 10.0 mm (3)
  • 10.076 mm (5)
  • 10.101 mm (1)
  • 11.0 mm (20)
  • 12.0 mm (1)
  • 12.5 mm (3)
  • 12.55 mm (4)
  • 12.625 mm (2)
  • 12.775 mm (3)
  • 12.8 mm (2)
  • 13.0 mm (10)
  • 13.476 mm (2)
  • 13.701 mm (5)
  • 14.101 mm (2)
  • 14.125 mm (2)
  • 14.201 mm (4)
  • 14.601 mm (3)
  • 14.826 mm (3)
  • 15.0 mm (6)
  • 15.275 mm (2)
  • 15.3 mm (2)
  • 15.601 mm (3)
  • 15.775 mm (3)
  • 15.8 mm (4)
  • 16.0 mm (7)
  • 16.7 mm (2)
  • 17.6 mm (4)
  • 17.625 mm (2)
  • 18.0 mm (3)
  • 18.325 mm (2)
  • 18.6 mm (6)
  • 18.8 mm (2)
  • 19.0 mm (7)
  • 19.3 mm (2)
  • 20.0 mm (5)
  • 20.451 mm (3)
  • 20.55 mm (2)
  • 20.6 mm (2)
  • 21.3 mm (2)
  • 22.0 mm (8)
  • 22.6 mm (3)
  • 23.6 mm (4)
  • 23.625 mm (5)
  • 23.901 mm (2)
  • 24.0 mm (2)
  • 24.1 mm (2)
  • 24.3 mm (2)
  • 25.0 mm (6)
  • 26.0 mm (11)
  • 26.8 mm (2)
  • 28.0 mm (4)
  • 28.6 mm (3)
  • 31.0 mm (2)
  • 32.0 mm (15)
  • 38.0 mm (11)
  • 39.1 mm (2)
  • 40.651 mm (2)
  • 41.0 mm (2)
  • 45.0 mm (5)
  • 50.0 mm (2)
  • 56.0 mm (5)
  • 75.0 mm (11)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (5)
  • 90.0 (1533)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Straight-Cylindrical (1263)
  • Weldon (245)
  • Weldon Short (30)
Number of Flutes
Number of Flutes
  • 2 (548)
  • 3 (331)