M95 Series

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (20)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(20)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(20)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(20)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(20)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(20)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(18)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(18)
    • M Stainless Steel (18)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(18)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(18)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(18)
    • K Cast Iron (18)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(18)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(18)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(18)
    • N Non-Ferrous Materials (5)
      • N1
        Wrought Aluminum (5)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(5)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(5)
    • S High-Temp Alloys (18)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(15)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(15)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(15)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(18)
    Applications
    Applications
    • Slot MillingSlot Milling (14)
    • Slot SideSlot Side (14)
    Cutting Diameter
    Cutting Diameter
    • 3.938 in(4)
    • 4.921 in(4)
    • 6.299 in(4)
    • 7.875 in(2)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 100.0 mm(4)
    • 125.0 mm(4)
    • 160.0 mm(4)
    • 200.0 mm(2)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Length
    Cutting Length
    • 4.0 mm(2)
    • 6.0 mm(2)
    • 7.0 mm(3)
    • 8.0 mm(4)
    • 10.0 mm(3)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.157 in(2)
    • 0.237 in(2)
    • 0.276 in(3)
    • 0.315 in(4)
    • 0.394 in(3)
    Cutting Length MintoCutting Length Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (14)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • 2 Key & Cutter Retention Screw (14)
    Number of Flutes
    Number of Flutes
    • 3 (2)
    • 4 (2)
    • 5 (3)
    • 6 (4)
    • 8 (1)
    • 9 (2)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 4.0 (25)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.0 in(25)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(25)
    Corner Radius MintoCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.151 mm(25)
    Corner Chamfer MintoCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.006 in(25)
    Corner Chamfer MintoCorner Chamfer Max
    Application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM (14)
    • TN5515 (3)
    • TN7525 (12)
    • TTM09 (14)
    • TTR (12)
    • WK15CM (13)
    • WP35CM (16)
    • WP40PM (16)
    Hand Of Tool
    Hand Of Tool
    • N (14)
    Wiper Insert
    Wiper Insert
    • N (13)
    Front-End
    Cutting Width
    Cutting Width
    • 0.157 in(2)
    • 0.237 in(2)
    • 0.276 in(3)
    • 0.315 in(4)
    • 0.394 in(3)
    Cutting Width MintoCutting Width Max
    Cutting Width
    Cutting Width
    • 4.0 mm(2)
    • 6.0 mm(2)
    • 7.0 mm(3)
    • 8.0 mm(4)
    • 10.0 mm(3)
    Cutting Width MintoCutting Width Max
    Insert Shape
    Insert Shape
    • S-SQUARE ON EDGE 90 (25)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.984 in(4)
    • 1.28 in(4)
    • 1.772 in(4)
    • 2.48 in(2)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 25.0 mm(4)
    • 32.5 mm(4)
    • 45.0 mm(4)
    • 63.0 mm(2)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Insert Geometry
    Shape
    Shape
    • S-SQUARE ON EDGE 90 (13)
    Insert IC Size
    Insert IC Size
    • 11.0 mm(5)
    • 12.701 mm(8)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.433 in(5)
    • 0.5 in(8)
    Insert IC Size MintoInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 11.0 mm(5)
    • 12.701 mm(8)
    Cutting Edge Length MintoCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.433 in(5)
    • 0.5 in(8)
    Cutting Edge Length MintoCutting Edge Length Max
    Cutting Tool Material
    Cutting Tool Material
    • H W (13)
    Tolerance Class
    Tolerance Class
    • H (13)
    Back-End
    Connection Type
    Connection Type
    • ARBOR (14)
    Back-End Diameter
    Back-End Diameter
    • 27.0 mm(4)
    • 40.0 mm(8)
    • 50.0 mm(2)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 1.063 in(4)
    • 1.575 in(8)
    • 1.969 in(2)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?