Welcome
Please confirm your preferences
Update Preferences

Product Suggestions

Product Family suggestions

Contact a WIDIA Expert

Customer Support

Find customer support centers around the globe.

Quick Order
Item(s) successfully added to cart
View Cart

    TopThread™

    Select Filters
    Filters
    Filters
      View filters in
      Metric
      Inch
      Key Filters
      Workpiece Material
      Workpiece Material
      • P Steel (208)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(208)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(208)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(208)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(208)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(208)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(208)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(208)
      • M Stainless Steel (208)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(208)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(208)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(208)
      • K Cast Iron (208)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(208)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(208)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(208)
      • N Non-Ferrous Materials (208)
        • N1
          Wrought Aluminum (208)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(208)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(208)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (208)
        • N5
          Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (208)
        • N6
          Carbon, Graphite Composites, CFRP (208)
        • N7
          MMC's (208)
      • S High-Temp Alloys (208)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(208)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(208)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(208)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(208)
      • H Hardened Materials (157)
        • H1
          Hardened Materials 44-48 HRC(157)
        • H2
          Hardened Materials 48-55 HRC(157)
        • H3
          Hardened Materials 56-60 HRC(148)
        • H4
          Hardened Materials >60 HRC(148)
      Select All Star
      • DE (5)
      • IN (3)
      • US (83)
      Applications
      Applications
      • Chamfer TurningChamfer Turning (6)
      • Cut-OffCut-Off (6)
      • Deep GroovingDeep Grooving (6)
      • Face GroovingFace Grooving (73)
      • FacingFacing (12)
      • GroovingGrooving (102)
      • ID GroovingID Grooving (59)
      • ID Thread TurningID Thread Turning (128)
      • Multiple Direction CuttingMultiple Direction Cutting (6)
      • OD Thread TurningOD Thread Turning (167)
      • Plunge TurningPlunge Turning (6)
      • ProfilingProfiling (8)
      • TRN BoringTRN Boring (6)
      • ThreadingThreading (94)
      • TurningTurning (12)
      Type of Thread
      Type of Thread
      • 60 (158)
      • ACME (89)
      • API (16)
      • API RD (56)
      • BSW (35)
      • BUTTRESS (53)
      • M (20)
      • NPT (12)
      • STUB ACME (56)
      • UN (148)
      • UNJ (35)
      Cutting Condition
      Cutting Condition
      • Heavily Interrupted Cut (130)
      • Lightly Interrupted Cut (130)
      • Smooth Cut (135)
      • Varying Depth of Cut (130)
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 90.0 (140)
      Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • Boring Bar Shank (40)
      • KM (28)
      • Toolholder (48)
      Cutting Edges Per Insert
      Cutting Edges Per Insert
      • 1.0 (137)
      • 2.0 (201)
      • 4.0 (2)
      Cutting Edges Per Insert MintoCutting Edges Per Insert Max
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 1.575 in(8)
      • 1.85 in(4)
      • 2.5 in(1)
      • 2.757 in(6)
      • 3.15 in(3)
      • 3.5 in(1)
      • 3.543 in(4)
      • 3.938 in(5)
      • 4.0 in(2)
      • 4.331 in(4)
      • 4.5 in(9)
      • 4.921 in(8)
      • 5.0 in(9)
      • 5.906 in(19)
      • 6.0 in(22)
      • 6.694 in(2)
      • 7.087 in(2)
      • 7.875 in(4)
      • 8.0 in(3)
      • 9.843 in(2)
      • 10.0 in(5)
      • 11.811 in(3)
      • 12.0 in(4)
      • 13.781 in(1)
      • 14.0 in(6)
      • 16.0 in(3)
      Over All Length [L] MintoOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 40.0 mm(8)
      • 47.0 mm(4)
      • 63.5 mm(1)
      • 70.0 mm(6)
      • 80.0 mm(3)
      • 88.9 mm(1)
      • 90.0 mm(4)
      • 100.0 mm(5)
      • 101.601 mm(2)
      • 110.0 mm(4)
      • 114.301 mm(9)
      • 125.0 mm(8)
      • 127.0 mm(9)
      • 150.0 mm(19)
      • 152.4 mm(22)
      • 170.0 mm(2)
      • 180.0 mm(2)
      • 200.0 mm(4)
      • 203.201 mm(3)
      • 250.0 mm(2)
      • 254.0 mm(5)
      • 300.0 mm(3)
      • 304.8 mm(4)
      • 350.0 mm(1)
      • 355.6 mm(6)
      • 406.401 mm(3)
      Over All Length [L] MintoOver All Length [L] Max
      Corner configuration
      Corner Radius
      Corner Radius
      • 0.002 in(12)
      • 0.003 in(114)
      • 0.004 in(100)
      • 0.005 in(14)
      • 0.006 in(26)
      • 0.007 in(123)
      • 0.008 in(137)
      • 0.01 in(72)
      • 0.011 in(12)
      • 0.012 in(34)
      • 0.014 in(78)
      • 0.016 in(55)
      • 0.019 in(16)
      • 0.02 in(67)
      • 0.023 in(75)
      • 0.03 in(55)
      • 0.031 in(108)
      • 0.035 in(16)
      • 0.039 in(108)
      • 0.047 in(108)
      • 0.049 in(108)
      • 0.06 in(108)
      • 0.062 in(53)
      • 0.063 in(91)
      • 0.069 in(108)
      • 0.078 in(53)
      • 0.079 in(75)
      • 0.089 in(75)
      • 0.095 in(75)
      • 0.098 in(22)
      • 0.125 in(22)
      Corner Radius MintoCorner Radius Max
      Corner Radius
      Corner Radius
      • 0.05 mm(12)
      • 0.076 mm(114)
      • 0.1 mm(100)
      • 0.125 mm(14)
      • 0.151 mm(26)
      • 0.176 mm(123)
      • 0.2 mm(137)
      • 0.225 mm(35)
      • 0.25 mm(70)
      • 0.275 mm(12)
      • 0.301 mm(34)
      • 0.325 mm(76)
      • 0.351 mm(59)
      • 0.4 mm(55)
      • 0.45 mm(16)
      • 0.476 mm(6)
      • 0.5 mm(67)
      • 0.576 mm(75)
      • 0.75 mm(55)
      • 0.775 mm(108)
      • 0.9 mm(16)
      • 1.0 mm(108)
      • 1.201 mm(108)
      • 1.25 mm(108)
      • 1.5 mm(108)
      • 1.576 mm(53)
      • 1.6 mm(91)
      • 1.75 mm(108)
      • 1.975 mm(53)
      • 2.0 mm(75)
      • 2.25 mm(75)
      • 2.401 mm(75)
      • 2.5 mm(22)
      • 3.176 mm(22)
      Corner Radius MintoCorner Radius Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 mm(71)
      Corner Chamfer MintoCorner Chamfer Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 in(71)
      Corner Chamfer MintoCorner Chamfer Max
      Application
      Minimum Depth of Cut
      Minimum Depth of Cut
      Minimum Feed
      Minimum Feed
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • K2885 (28)
      • K313 (32)
      • K420 (32)
      • K4H (20)
      • K68 (32)
      • KB1345 (16)
      • KB1630 (16)
      • KB5625 (12)
      • KBH20 (6)
      • KC250 (28)
      • KC5010 (32)
      • KC5025 (32)
      • KC5410 (32)
      • KC710 (32)
      • KC720 (32)
      • KC722 (32)
      • KC730 (32)
      • KC732 (12)
      • KC810 (32)
      • KC850 (32)
      • KC910 (20)
      • KC9110 (32)
      • KC9120 (12)
      • KC9320 (32)
      • KC935 (32)
      • KC950 (32)
      • KCK20 (24)
      • KCK20B (32)
      • KCP10B (32)
      • KCP25B (32)
      • KCP25C (32)
      • KCU10 (32)
      • KCU10B (32)
      • KCU25 (32)
      • KCU25B (32)
      • KD050 (6)
      • KD081 (12)
      • KD100 (14)
      • KD120 (16)
      • KD1425 (12)
      • KT175 (28)
      • KT315 (32)
      • KU10T (32)
      • KU25T (32)
      • KU30T (32)
      • KY3000 (16)
      • THM (108)
      • TN10P (88)
      • TN6010 (157)
      • TN6025 (188)
      • TN7110 (130)
      • WU10HT (27)
      • WU10PT (46)
      • WU25PT (26)
      Hand Of Tool
      Hand Of Tool
      • L (46)
      • R (70)
      Wiper Insert
      Wiper Insert
      • N (210)
      F Dimension
      F Dimension
      • 6.551 mm(2)
      • 7.0 mm(2)
      • 10.3 mm(1)
      • 11.0 mm(10)
      • 11.101 mm(2)
      • 12.0 mm(1)
      • 12.701 mm(5)
      • 13.0 mm(4)
      • 14.275 mm(3)
      • 15.875 mm(3)
      • 16.0 mm(2)
      • 17.0 mm(12)
      • 17.475 mm(4)
      • 19.05 mm(1)
      • 20.0 mm(1)
      • 22.0 mm(6)
      • 22.225 mm(2)
      • 25.0 mm(3)
      • 25.401 mm(8)
      • 27.0 mm(11)
      • 28.0 mm(1)
      • 31.75 mm(16)
      • 32.0 mm(7)
      • 34.926 mm(2)
      • 35.0 mm(1)
      • 38.1 mm(4)
      • 40.0 mm(2)
      F Dimension MintoF Dimension Max
      F Dimension
      F Dimension
      • 0.258 in(2)
      • 0.276 in(2)
      • 0.406 in(1)
      • 0.433 in(10)
      • 0.437 in(2)
      • 0.473 in(1)
      • 0.5 in(5)
      • 0.512 in(4)
      • 0.562 in(3)
      • 0.625 in(3)
      • 0.63 in(2)
      • 0.669 in(12)
      • 0.689 in(4)
      • 0.75 in(1)
      • 0.787 in(1)
      • 0.866 in(6)
      • 0.875 in(2)
      • 0.984 in(3)
      • 1.0 in(8)
      • 1.063 in(11)
      • 1.102 in(1)
      • 1.25 in(16)
      • 1.26 in(7)
      • 1.375 in(2)
      • 1.379 in(1)
      • 1.5 in(4)
      • 1.575 in(2)
      F Dimension MintoF Dimension Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 0.0 mm(52)
      • 11.175 mm(2)
      • 11.5 mm(2)
      • 18.5 mm(4)
      • 18.55 mm(2)
      • 20.0 mm(4)
      • 20.326 mm(1)
      • 22.0 mm(2)
      • 25.0 mm(2)
      • 25.401 mm(2)
      • 26.0 mm(2)
      • 28.576 mm(2)
      • 32.0 mm(4)
      • 34.0 mm(8)
      • 34.926 mm(4)
      • 40.0 mm(4)
      • 41.301 mm(25)
      • 44.0 mm(2)
      • 44.45 mm(2)
      • 47.6 mm(25)
      • 50.801 mm(2)
      • 54.0 mm(9)
      • 55.875 mm(1)
      • 56.625 mm(2)
      • 57.2 mm(12)
      • 60.325 mm(1)
      • 63.5 mm(7)
      • 69.851 mm(2)
      • 70.0 mm(1)
      • 76.2 mm(1)
      • 88.9 mm(28)
      • 139.701 mm(25)
      • 174.601 mm(25)
      • 209.601 mm(12)
      • 222.3 mm(12)
      Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 0.0 in(52)
      • 0.44 in(2)
      • 0.453 in(2)
      • 0.728 in(4)
      • 0.73 in(2)
      • 0.787 in(4)
      • 0.8 in(1)
      • 0.866 in(2)
      • 0.984 in(2)
      • 1.0 in(2)
      • 1.024 in(2)
      • 1.125 in(2)
      • 1.26 in(4)
      • 1.339 in(8)
      • 1.375 in(4)
      • 1.575 in(4)
      • 1.627 in(25)
      • 1.732 in(2)
      • 1.75 in(2)
      • 1.874 in(25)
      • 2.0 in(2)
      • 2.126 in(9)
      • 2.2 in(1)
      • 2.229 in(2)
      • 2.253 in(12)
      • 2.375 in(1)
      • 2.5 in(7)
      • 2.75 in(2)
      • 2.757 in(1)
      • 3.0 in(1)
      • 3.5 in(28)
      • 5.5 in(25)
      • 6.875 in(25)
      • 8.252 in(12)
      • 8.752 in(12)
      Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 393.661 in(135)
      Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 9999.0 mm(135)
      Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
      Countersunk Angle
      Countersunk Angle
      • 14.5 (14)
      • 27.0 (2)
      • 27.5 (2)
      • 30.0 (50)
      • 33.0 (2)
      • 45.0 (1)
      Countersunk Angle MintoCountersunk Angle Max
      Cutting Direction
      Cutting Direction
      • E (54)
      • S (62)
      Rake Angle Style
      Rake Angle Style
      • NEGATIVE-ZERO (1)
      • NEUTRAL (ZERO) (115)
      Maximum Bore Depth
      Maximum Bore Depth
      • 1.0 in(7)
      • 1.23 in(1)
      • 1.232 in(1)
      • 1.29 in(1)
      • 1.5 in(1)
      • 1.575 in(6)
      • 1.655 in(2)
      • 1.891 in(2)
      • 2.0 in(15)
      • 2.169 in(4)
      • 2.209 in(2)
      • 2.5 in(3)
      • 2.52 in(2)
      • 2.757 in(2)
      • 2.955 in(4)
      • 2.993 in(2)
      • 3.0 in(2)
      • 3.15 in(4)
      • 3.781 in(2)
      • 3.938 in(4)
      • 4.0 in(4)
      • 5.0 in(2)
      • 5.039 in(2)
      • 6.0 in(2)
      • 6.299 in(3)
      • 7.0 in(2)
      • 7.875 in(1)
      • 8.0 in(3)
      Maximum Bore Depth MintoMaximum Bore Depth Max
      Maximum Bore Depth
      Maximum Bore Depth
      • 25.401 mm(7)
      • 31.25 mm(1)
      • 31.3 mm(1)
      • 32.775 mm(1)
      • 38.1 mm(1)
      • 40.0 mm(6)
      • 42.026 mm(2)
      • 48.0 mm(2)
      • 50.801 mm(15)
      • 55.1 mm(4)
      • 56.1 mm(2)
      • 63.5 mm(3)
      • 64.0 mm(2)
      • 70.025 mm(2)
      • 75.05 mm(4)
      • 76.025 mm(2)
      • 76.2 mm(2)
      • 80.0 mm(4)
      • 96.025 mm(2)
      • 100.0 mm(4)
      • 101.601 mm(4)
      • 127.0 mm(2)
      • 128.0 mm(2)
      • 152.4 mm(2)
      • 160.0 mm(3)
      • 177.8 mm(2)
      • 200.0 mm(1)
      • 203.201 mm(3)
      Maximum Bore Depth MintoMaximum Bore Depth Max
      Boring Bar Material
      Boring Bar Material
      • C (2)
      • S (60)
      Front-End
      Clamp Style
      Clamp Style
      • N (140)
      Cutting Width
      Cutting Width
      • 0.02 in(55)
      • 0.031 in(55)
      • 0.035 in(16)
      • 0.039 in(108)
      • 0.041 in(39)
      • 0.047 in(113)
      • 0.055 in(55)
      • 0.058 in(55)
      • 0.06 in(108)
      • 0.062 in(113)
      • 0.067 in(55)
      • 0.069 in(108)
      • 0.073 in(53)
      • 0.077 in(55)
      • 0.078 in(53)
      • 0.079 in(108)
      • 0.088 in(108)
      • 0.089 in(81)
      • 0.094 in(27)
      • 0.095 in(113)
      • 0.097 in(12)
      • 0.098 in(108)
      • 0.105 in(12)
      • 0.108 in(108)
      • 0.11 in(12)
      • 0.119 in(130)
      • 0.122 in(12)
      • 0.125 in(130)
      • 0.126 in(73)
      • 0.128 in(108)
      • 0.129 in(16)
      • 0.131 in(6)
      • 0.138 in(130)
      • 0.143 in(12)
      • 0.147 in(31)
      • 0.15 in(8)
      • 0.151 in(8)
      • 0.152 in(55)
      • 0.156 in(53)
      • 0.157 in(75)
      • 0.167 in(57)
      • 0.169 in(12)
      • 0.177 in(75)
      • 0.178 in(12)
      • 0.185 in(14)
      • 0.188 in(66)
      • 0.189 in(75)
      • 0.192 in(27)
      • 0.193 in(6)
      • 0.195 in(33)
      • 0.196 in(53)
      • 0.197 in(22)
      • 0.202 in(4)
      • 0.213 in(4)
      • 0.217 in(22)
      • 0.219 in(4)
      • 0.237 in(22)
      • 0.25 in(22)
      • 0.256 in(4)
      Cutting Width MintoCutting Width Max
      Cutting Width
      Cutting Width
      • 0.5 mm(55)
      • 0.775 mm(55)
      • 0.8 mm(55)
      • 0.9 mm(16)
      • 1.0 mm(108)
      • 1.05 mm(39)
      • 1.201 mm(113)
      • 1.401 mm(55)
      • 1.475 mm(55)
      • 1.5 mm(108)
      • 1.576 mm(113)
      • 1.701 mm(55)
      • 1.75 mm(108)
      • 1.826 mm(53)
      • 1.951 mm(55)
      • 1.975 mm(53)
      • 2.0 mm(108)
      • 2.2 mm(108)
      • 2.225 mm(49)
      • 2.25 mm(81)
      • 2.375 mm(27)
      • 2.401 mm(113)
      • 2.475 mm(12)
      • 2.5 mm(108)
      • 2.676 mm(12)
      • 2.75 mm(108)
      • 2.801 mm(12)
      • 3.0 mm(130)
      • 3.1 mm(12)
      • 3.176 mm(130)
      • 3.2 mm(73)
      • 3.25 mm(108)
      • 3.276 mm(16)
      • 3.325 mm(6)
      • 3.5 mm(130)
      • 3.6 mm(12)
      • 3.725 mm(31)
      • 3.801 mm(8)
      • 3.825 mm(8)
      • 3.85 mm(55)
      • 3.95 mm(53)
      • 3.975 mm(27)
      • 4.0 mm(75)
      • 4.25 mm(57)
      • 4.3 mm(12)
      • 4.5 mm(75)
      • 4.525 mm(12)
      • 4.7 mm(14)
      • 4.775 mm(66)
      • 4.801 mm(75)
      • 4.875 mm(27)
      • 4.9 mm(6)
      • 4.95 mm(33)
      • 4.976 mm(53)
      • 5.0 mm(22)
      • 5.125 mm(4)
      • 5.4 mm(4)
      • 5.5 mm(22)
      • 5.575 mm(4)
      • 6.0 mm(22)
      • 6.351 mm(22)
      • 6.5 mm(4)
      Cutting Width MintoCutting Width Max
      Insert Size
      Insert Size
      • 1 (6)
      • 2 (57)
      • 3 (55)
      • 4 (19)
      • 6 (2)
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 0.067 in(1)
      • 0.138 in(35)
      • 0.21 in(36)
      • 0.225 in(1)
      • 0.24 in(1)
      • 0.294 in(15)
      • 0.334 in(2)
      Maximum Cutting Depth MintoMaximum Cutting Depth Max
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 1.701 mm(1)
      • 3.5 mm(35)
      • 5.325 mm(36)
      • 5.726 mm(1)
      • 6.101 mm(1)
      • 7.476 mm(15)
      • 8.475 mm(2)
      Maximum Cutting Depth MintoMaximum Cutting Depth Max
      Thread TPI
      Thread TPI
      • 2.0 (2)
      • 3.0 (1)
      • 4.0 (4)
      • 6.0 (3)
      • 8.0 (6)
      • 10.0 (1)
      • 11.0 (1)
      • 12.0 (4)
      • 14.0 (2)
      • 16.0 (2)
      • 20.0 (2)
      • 24.0 (2)
      Thread TPI MintoThread TPI Max
      Thread Pitch
      Thread Pitch
      • 2.0 mm(2)
      • 6.25 mm(1)
      Thread Pitch MintoThread Pitch Max
      Thread Pitch
      Thread Pitch
      • 0.079 in(2)
      • 0.246 in(1)
      Thread Pitch MintoThread Pitch Max
      Insert Geometry
      Shape
      Shape
      • TN-TOP NOTCH (71)
      Insert IC Size
      Insert IC Size
      • 4.75 mm(1)
      Insert IC Size MintoInsert IC Size Max
      Insert IC Size
      Insert IC Size
      • 0.187 in(1)
      Insert IC Size MintoInsert IC Size Max
      Insert Seat Size
      Insert Seat Size
      • 1 (2)
      • 2 (16)
      • 3 (42)
      • 4 (7)
      • 4U (1)
      • 6 (3)
      Cutting Tool Material
      Cutting Tool Material
      • B H (16)
      • B L (12)
      • C N (16)
      • D P (14)
      • H T (32)
      • H W (210)
      Back-End
      Connection Type
      Connection Type
      • BORING BAR (40)
      • SQUARE SHANK (48)
      • TAPER SHANK (28)
      System Size
      System Size
      • KM40TS (28)
      Back-End Diameter
      Back-End Diameter
      • 9.525 mm(1)
      • 10.0 mm(1)
      • 12.0 mm(3)
      • 12.701 mm(3)
      • 15.875 mm(3)
      • 16.0 mm(2)
      • 19.05 mm(2)
      • 20.0 mm(2)
      • 25.0 mm(4)
      • 25.401 mm(4)
      • 31.75 mm(2)
      • 32.0 mm(2)
      • 38.1 mm(2)
      • 40.0 mm(35)
      • 44.45 mm(2)
      • 50.0 mm(1)
      • 50.801 mm(3)
      Back-End Diameter MintoBack-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.375 in(1)
      • 0.394 in(1)
      • 0.473 in(3)
      • 0.5 in(3)
      • 0.625 in(3)
      • 0.63 in(2)
      • 0.75 in(2)
      • 0.787 in(2)
      • 0.984 in(4)
      • 1.0 in(4)
      • 1.25 in(2)
      • 1.26 in(2)
      • 1.5 in(2)
      • 1.575 in(35)
      • 1.75 in(2)
      • 1.969 in(1)
      • 2.0 in(3)
      Back-End Diameter MintoBack-End Diameter Max
      Shank Height
      Shank Height
      • 0.375 in(1)
      • 0.473 in(2)
      • 0.5 in(4)
      • 0.625 in(3)
      • 0.63 in(2)
      • 0.75 in(6)
      • 0.787 in(4)
      • 0.984 in(7)
      • 1.0 in(12)
      • 1.25 in(5)
      • 1.26 in(2)
      Shank Height MintoShank Height Max
      Shank Height
      Shank Height
      • 9.525 mm(1)
      • 12.0 mm(2)
      • 12.701 mm(4)
      • 15.875 mm(3)