Versatile Face Mill for All Machine Conditions

This versatile, 16-edged face mill for medium roughing or semi-finishing of steel, stainless steel, cast iron and nodular iron components will perform in all machine conditions including low-power machines, unstable, non-rigid set-ups, long overhangs, weak machines, or even weak fixture conditions.

Features and Benefits

  • Universal -MM geometry insert in grades WP35CM, WU20PM, WK15CM
  • 44º cutter lead angle
  • Depth of Cut (DOC): (4mm Ap1 max)
  • Precision ground insert
  • Smart insert design engineered to resist shock loads resulting in longer tool life

Thrive in a Variety of Machine Setups

When you need the lowest cost-per-edge in medium-roughing applications, look no further than M1600. This face mill creates a smooth cut allowing for lower power consumption on the machine which results in a longer life on the spindle giving you more value for your money.

Watch as we put M1600 side milling roughing to the test in cast iron, steel, and stainless steel.

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (22)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (22)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (22)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (22)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (22)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (22)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (22)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (22)
  • M Stainless Steel (22)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (22)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (22)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (22)
  • K Cast Iron (27)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (27)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (27)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (27)
  • N Non-Ferrous Materials (22)
    • N1
      Wrought Aluminum (22)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (22)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (22)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (8)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (8)
  • S High-Temp Alloys (22)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (21)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (21)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (21)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (22)
  • H Hardened Materials (23)
    • H1
      Hardened Materials 44-48 HRC (23)
Select All Star
  • CN (14)
  • DE (16)
  • IN (17)
Applications
Applications
  • Chamfer Milling Chamfer Milling (12)
  • Face Milling Face Milling (19)
Cutting Diameter
Cutting Diameter
  • 1.969 in (1)
  • 2.0 in (1)
  • 2.48 in (1)
  • 2.5 in (1)
  • 3.0 in (2)
  • 3.15 in (2)
  • 3.938 in (2)
  • 4.0 in (2)
  • 4.921 in (2)
  • 5.0 in (1)
  • 6.0 in (2)
  • 6.299 in (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 50.0 mm (1)
  • 50.801 mm (1)
  • 63.0 mm (1)
  • 63.5 mm (1)
  • 76.2 mm (2)
  • 80.0 mm (2)
  • 100.0 mm (2)
  • 101.601 mm (2)
  • 125.0 mm (2)
  • 127.0 mm (1)
  • 152.4 mm (2)
  • 160.0 mm (2)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 60.725 mm (1)
  • 61.526 mm (1)
  • 73.726 mm (1)
  • 74.226 mm (1)
  • 82.65 mm (1)
  • 86.45 mm (1)
  • 86.926 mm (1)
  • 90.726 mm (1)
  • 106.45 mm (1)
  • 108.051 mm (1)
  • 110.726 mm (1)
  • 112.325 mm (1)
  • 131.451 mm (1)
  • 135.725 mm (1)
  • 137.725 mm (1)
  • 158.851 mm (1)
  • 163.125 mm (1)
  • 166.451 mm (1)
  • 170.726 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 2.391 in (1)
  • 2.422 in (1)
  • 2.903 in (1)
  • 2.922 in (1)
  • 3.254 in (1)
  • 3.404 in (1)
  • 3.422 in (1)
  • 3.572 in (1)
  • 4.191 in (1)
  • 4.255 in (1)
  • 4.359 in (1)
  • 4.422 in (1)
  • 5.175 in (1)
  • 5.344 in (1)
  • 5.422 in (1)
  • 6.255 in (1)
  • 6.422 in (1)
  • 6.553 in (1)
  • 6.721 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 2.1 mm (7)
  • 3.7 mm (12)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.083 in (7)
  • 0.146 in (12)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 1.575 in (4)
  • 1.75 in (1)
  • 1.969 in (6)
  • 2.0 in (1)
  • 2.38 in (2)
  • 2.48 in (5)
Reach Min to Reach Max
Reach
Reach
  • 40.0 mm (4)
  • 44.45 mm (1)
  • 50.0 mm (6)
  • 50.801 mm (1)
  • 60.45 mm (2)
  • 63.0 mm (5)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 42.0 (7)
  • 43.0 (12)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (8)
  • B-Cutter Retention Screw (9)
  • C-Bolt Circle (2)
Number of Flutes
Number of Flutes
  • 10 (2)
  • 11 (2)
  • 12 (1)
  • 13 (2)
  • 16 (2)
  • 4 (2)
  • 5 (2)
  • 7 (2)
  • 8 (2)
  • 9 (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 4.0 (9)
  • 16.0 (25)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.575 in (4)
  • 1.75 in (1)
  • 1.969 in (6)
  • 2.0 in (1)
  • 2.38 in (2)
  • 2.48 in (5)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (4)
  • 44.45 mm (1)
  • 50.0 mm (6)
  • 50.801 mm (1)
  • 60.45 mm (2)
  • 63.0 mm (5)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.0 in (9)
  • 0.031 in (10)
  • 0.047 in (15)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (9)
  • 0.8 mm (10)
  • 1.201 mm (15)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (9)
  • 0.601 mm (10)
  • 0.775 mm (15)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (9)
  • 0.024 in (10)
  • 0.031 in (15)
Corner Chamfer Min to Corner Chamfer Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM-F (8)
  • WK15CM (21)
  • WP35CM (13)
  • WU10PM (9)
  • WU20PM (21)
Hand Of Tool
Hand Of Tool
  • R (19)
Wiper Insert
Wiper Insert
  • Y (8)
Front-End
Insert Shape
Insert Shape
  • O-OCTOGON 135 (25)
  • X-RHOMBIC 83 (9)
Center Cutting
Center Cutting
Insert Geometry
Shape
Shape
  • O-OCTOGON 135 (6)
  • X-RHOMBIC 83 (2)
Insert IC Size
Insert IC Size
  • 10.0 mm (3)
  • 12.701 mm (2)
  • 16.875 mm (3)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.394 in (3)
  • 0.5 in (2)
  • 0.664 in (3)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 4.101 mm (3)
  • 6.875 mm (3)
  • 8.725 mm (1)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.161 in (3)
  • 0.271 in (3)
  • 0.345 in (1)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • MM (6)
Cutting Tool Material
Cutting Tool Material
  • H W (8)
Tolerance Class
Tolerance Class
  • G (6)
  • H (2)
Back-End
Connection Type
Connection Type
  • SHELL MILL (19)
Back-End Diameter
Back-End Diameter
  • 19.05 mm (2)
  • 22.0 mm (2)
  • 25.401 mm (2)
  • 27.0 mm (2)
  • 32.0 mm (2)
  • 38.1 mm (3)
  • 40.0 mm (4)
  • 50.801 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.75 in (2)
  • 0.866 in (2)
  • 1.0 in (2)
  • 1.063 in (2)
  • 1.26 in (2)
  • 1.5 in (3)
  • 1.575 in (4)
  • 2.0 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?