Product Suggestions

Product Family suggestions

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read

Laydown Threading

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (181)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (181)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (181)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (181)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (181)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (181)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (181)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (181)
  • M Stainless Steel (181)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (181)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (181)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (181)
  • K Cast Iron (181)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (181)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (181)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (181)
  • N Non-Ferrous Materials (180)
    • N1
      Wrought Aluminum
      (180)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (180)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (180)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (19)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (180)
    • N6
      Carbon, Graphite Composites, CFRP
      (180)
    • N7
      MMC's
      (19)
  • S High-Temp Alloys (181)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (181)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (181)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (181)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (181)
  • H Hardened Materials (19)
    • H1
      Hardened Materials 44-48 HRC
      (19)
Select All Star
  • US (7)
Applications
Applications
  • ID Thread Turning ID Thread Turning (94)
  • OD Thread Turning OD Thread Turning (88)
  • Profiling Profiling (10)
  • TRN Boring TRN Boring (5)
  • Threading Threading (29)
Type of Thread
Type of Thread
  • 55 (71)
  • 60 (82)
  • ACME (16)
  • API (6)
  • API BUTTRESS (5)
  • API RD (11)
  • BSPT (15)
  • BSW (68)
  • M (106)
  • NPT (42)
  • NPTF (15)
  • RD DIN 405 (56)
  • STUB ACME (16)
  • TR DIN 103 (63)
  • UN (69)
  • UNJ (15)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (69)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (27)
  • KM (22)
  • Toolholder (19)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 3.0 (184)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.001 in (7)
  • 0.002 in (62)
  • 0.003 in (39)
  • 0.004 in (24)
  • 0.005 in (1)
  • 0.006 in (20)
  • 0.007 in (1)
  • 0.008 in (40)
  • 0.01 in (14)
  • 0.011 in (16)
  • 0.012 in (16)
  • 0.014 in (1)
  • 0.015 in (1)
  • 0.017 in (15)
  • 0.02 in (1)
  • 0.021 in (7)
  • 0.027 in (1)
  • 0.028 in (17)
  • 0.03 in (13)
  • 0.037 in (20)
  • 0.038 in (1)
  • 0.039 in (5)
  • 0.055 in (7)
  • 0.06 in (5)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (7)
  • 0.05 mm (62)
  • 0.076 mm (39)
  • 0.1 mm (24)
  • 0.125 mm (1)
  • 0.151 mm (20)
  • 0.176 mm (1)
  • 0.2 mm (40)
  • 0.225 mm (4)
  • 0.25 mm (11)
  • 0.275 mm (16)
  • 0.301 mm (16)
  • 0.325 mm (1)
  • 0.375 mm (1)
  • 0.426 mm (15)
  • 0.5 mm (1)
  • 0.525 mm (7)
  • 0.65 mm (1)
  • 0.701 mm (17)
  • 0.75 mm (13)
  • 0.925 mm (20)
  • 0.976 mm (1)
  • 1.0 mm (5)
  • 1.401 mm (7)
  • 1.526 mm (5)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (117)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (117)
Corner Chamfer Min to Corner Chamfer Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • HCK20 (14)
  • HCM15 (9)
  • K00331 (6)
  • K15 (41)
  • K68 (8)
  • KC5010 (10)
  • KC5025 (21)
  • KC710 (9)
  • KC720 (18)
  • KC722 (8)
  • KC730 (19)
  • KC9105 (1)
  • KU25T (8)
  • P25 (29)
  • PN120 (12)
  • SP4066 (4)
  • TN6025 (180)
  • TTS (11)
Hand Of Tool
Hand Of Tool
  • L (20)
  • R (48)
Wiper Insert
Wiper Insert
  • N (184)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 12.701 mm (3)
  • 13.0 mm (4)
  • 16.0 mm (4)
  • 16.5 mm (1)
  • 20.0 mm (3)
  • 20.326 mm (2)
  • 22.85 mm (2)
  • 24.0 mm (2)
  • 25.0 mm (2)
  • 27.0 mm (1)
  • 29.0 mm (4)
  • 30.475 mm (1)
  • 32.0 mm (4)
  • 36.0 mm (1)
  • 39.0 mm (1)
  • 40.0 mm (5)
  • 54.0 mm (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.5 in (3)
  • 0.512 in (4)
  • 0.63 in (4)
  • 0.65 in (1)
  • 0.787 in (3)
  • 0.8 in (2)
  • 0.9 in (2)
  • 0.946 in (2)
  • 0.984 in (2)
  • 1.063 in (1)
  • 1.143 in (4)
  • 1.2 in (1)
  • 1.26 in (4)
  • 1.417 in (1)
  • 1.536 in (1)
  • 1.575 in (5)
  • 2.126 in (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Countersunk Angle
Countersunk Angle
  • 15.0 (7)
  • 27.5 (12)
  • 30.0 (50)
Countersunk Angle Min to Countersunk Angle Max
Cutting Direction
Cutting Direction
  • E (29)
  • S (39)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (68)
Maximum Bore Depth
Maximum Bore Depth
  • 0.984 in (1)
  • 1.0 in (1)
  • 1.25 in (1)
  • 1.26 in (1)
  • 1.385 in (2)
  • 1.5 in (1)
  • 1.575 in (4)
  • 1.655 in (1)
  • 1.661 in (1)
  • 1.772 in (1)
  • 1.891 in (1)
  • 2.209 in (1)
  • 2.25 in (2)
  • 2.362 in (4)
  • 2.5 in (1)
  • 2.757 in (2)
  • 2.955 in (2)
  • 3.0 in (1)
  • 3.15 in (4)
  • 3.75 in (1)
  • 3.781 in (4)
  • 3.938 in (3)
  • 4.5 in (1)
  • 5.039 in (3)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 25.0 mm (1)
  • 25.401 mm (1)
  • 31.75 mm (1)
  • 32.0 mm (1)
  • 35.15 mm (2)
  • 38.1 mm (1)
  • 40.0 mm (4)
  • 42.0 mm (1)
  • 42.2 mm (1)
  • 45.0 mm (1)
  • 48.0 mm (1)
  • 56.1 mm (1)
  • 57.151 mm (2)
  • 60.0 mm (4)
  • 63.5 mm (1)
  • 70.025 mm (2)
  • 75.05 mm (2)
  • 76.2 mm (1)
  • 80.0 mm (4)
  • 95.25 mm (1)
  • 96.025 mm (4)
  • 100.0 mm (3)
  • 114.301 mm (1)
  • 128.0 mm (3)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • C (4)
  • S (39)
Front-End
Clamp Style
Clamp Style
  • C (14)
  • M (4)
  • S (51)
Insert Shape
Insert Shape
  • LT-TRIANGLE LAY DOWN THREAD 60 (181)
  • ON EDGE MISC (5)
Thread TPI
Thread TPI
  • 4.0 mm (1)
  • 4.5 mm (1)
  • 7.0 mm (5)
  • 8.0 mm (6)
  • 10.0 mm (2)
  • 11.0 mm (3)
  • 11.5 mm (2)
  • 12.0 mm (3)
  • 13.0 mm (1)
  • 14.0 mm (12)
  • 16.0 mm (3)
  • 18.0 mm (4)
  • 19.0 mm (1)
  • 20.0 mm (2)
  • 24.0 mm (1)
  • 28.0 mm (2)
  • 32.0 mm (2)
  • 48.0 mm (16)
Thread TPI Min to Thread TPI Max
Thread TPI
Thread TPI
  • 0.157 in (1)
  • 0.177 in (1)
  • 0.276 in (5)
  • 0.315 in (6)
  • 0.394 in (2)
  • 0.433 in (3)
  • 0.453 in (2)
  • 0.473 in (3)
  • 0.512 in (1)
  • 0.551 in (12)
  • 0.63 in (3)
  • 0.709 in (4)
  • 0.748 in (1)
  • 0.787 in (2)
  • 0.946 in (1)
  • 1.102 in (2)
  • 1.26 in (2)
  • 1.891 in (16)
Thread TPI Min to Thread TPI Max
Thread Pitch
Thread Pitch
  • 0.351 mm (1)
  • 0.5 mm (2)
  • 0.701 mm (1)
  • 0.75 mm (3)
  • 0.8 mm (1)
  • 1.0 mm (3)
  • 1.25 mm (2)
  • 1.5 mm (15)
  • 1.75 mm (2)
  • 2.0 mm (4)
  • 2.5 mm (2)
  • 3.0 mm (18)
  • 3.5 mm (2)
  • 4.0 mm (4)
  • 4.5 mm (2)
  • 5.0 mm (9)
  • 5.5 mm (2)
  • 6.0 mm (5)
Thread Pitch Min to Thread Pitch Max
Thread Pitch
Thread Pitch
  • 0.014 in (1)
  • 0.02 in (2)
  • 0.028 in (1)
  • 0.03 in (3)
  • 0.031 in (1)
  • 0.039 in (3)
  • 0.049 in (2)
  • 0.06 in (15)
  • 0.069 in (2)
  • 0.079 in (4)
  • 0.098 in (2)
  • 0.119 in (18)
  • 0.138 in (2)
  • 0.157 in (4)
  • 0.177 in (2)
  • 0.197 in (9)
  • 0.217 in (2)
  • 0.237 in (5)
Thread Pitch Min to Thread Pitch Max
Insert Geometry
Shape
Shape
  • LT-TRIANGLE LAY DOWN THREAD 60 (117)
Insert IC Size
Insert IC Size
  • 6.351 mm (8)
  • 9.525 mm (83)
  • 12.701 mm (18)
  • 15.875 mm (6)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.25 in (8)
  • 0.375 in (83)
  • 0.5 in (18)
  • 0.625 in (6)
Insert IC Size Min to Insert IC Size Max
Insert Seat Size
Insert Seat Size
  • 2 (8)
  • 3 (84)
  • 4 (18)
  • 5 (7)
Cutting Tool Material
Cutting Tool Material
  • H W (184)
Back-End
Connection Type
Connection Type
  • BORING BAR (27)
  • SQUARE SHANK (19)
  • TAPER SHANK (22)
System Size
System Size
  • KM40TS (22)
Back-End Diameter
Back-End Diameter
  • 9.525 mm (2)
  • 12.0 mm (1)
  • 15.0 mm (1)
  • 15.875 mm (1)
  • 19.05 mm (5)
  • 20.0 mm (7)
  • 25.0 mm (3)
  • 31.75 mm (1)
  • 32.0 mm (6)
  • 40.0 mm (23)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.375 in (2)
  • 0.473 in (1)
  • 0.591 in (1)
  • 0.625 in (1)
  • 0.75 in (5)
  • 0.787 in (7)
  • 0.984 in (3)
  • 1.25 in (1)
  • 1.26 in (6)
  • 1.575 in (23)
Back-End Diameter Min to Back-End Diameter Max
Shank Height
Shank Height
  • 1 in (5)
  • 0.315 in (1)
  • 0.5 in (1)
  • 0.63 in (2)
  • 0.709 in (5)
  • 0.741 in (2)
  • 0.75 in (2)
  • 0.787 in (2)
  • 0.89 in (2)
  • 0.939 in (1)
  • 0.984 in (3)
  • 1.143 in (5)
  • 1.214 in (1)
  • 1.26 in (3)
Shank Height Min to Shank Height Max
Shank Height
Shank Height
  • 18 mm (5)
  • 29 mm (5)
  • 25 mm (3)
  • 32 mm (3)
  • 16 mm (2)
  • 20 mm (2)
  • 8 mm (1)
  • 12.701 mm (1)
  • 18.825 mm (2)
  • 19.05 mm (2)
  • 22.6 mm (2)
  • 23.826 mm (1)
  • 25.401 mm (5)
  • 30.826 mm (1)
Shank Height Min to Shank Height Max
Shank Width
Shank Width
  • 1 in (5)
  • 0.315 in (1)
  • 0.5 in (1)
  • 0.63 in (2)
  • 0.728 in (5)
  • 0.75 in (2)
  • 0.787 in (2)
  • 0.864 in (1)
  • 0.906 in (2)
  • 0.984 in (3)
  • 1.141 in (1)
  • 1.181 in (5)
  • 1.26 in (3)
Shank Width Min to Shank Width Max
Shank Width
Shank Width
  • 30 mm (5)
  • 25 mm (3)
  • 32 mm (3)
  • 16 mm (2)
  • 20 mm (2)
  • 23 mm (2)
  • 8 mm (1)
  • 12.701 mm (1)
  • 18.5 mm (5)
  • 19.05 mm (2)
  • 21.951 mm (1)
  • 25.401 mm (5)
  • 28.951 mm (1)
Shank Width Min to Shank Width Max
No filters matching ""
Narrow by category:
View Products in
Metric
Inch

ORIGINAL PRODUCT

Threading • Laydown

Toolholders
(3 Products)
  • ThreadingThreading
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Insert Size [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length Gage Insert
2968591 LSSR123D LSSR123D W   3 19.0500 .7500 19.0500 .7500 25.4000 1.000 152.4000 6.000 25.4000 1.000 LT16ER
    List price:
    $126,49 /each.
    Your price::
    2968592 LSSR163D LSSR163D W   3 25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 25.4000 1.000 LT16ER
      List price:
      $134,37 /each.
      Your price::
      2968593 LSSR164D LSSR164D W   4 25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 30.4800 1.200 LT22ER
        List price:
        $137,96 /each.
        Your price::
        List price:
        Discount: %
        Your price::
        Replacement This item is no longer available
        Replacement Product Please contact customer service for assistance

        ORIGINAL PRODUCT

        Threading • Laydown

        Toolholders
        (5 Products)
        • ThreadingThreading
        View Products
        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Insert Size [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length Gage Insert
        2968570 LSASL163 LSASL163 W   3 25.4000 1.000 25.4000 1.000 25.4000 1.000 152.4000 6.000 30.480 1.200 LT16EL
          List price:
          $120,83 /each.
          Your price::
          2968584 LSASR123 LSASR123 W   3 19.0500 .7500 19.0500 .7500 19.0500 .7500 127.0000 5.000 30.480 1.200 LT16ER
            List price:
            $117,02 /each.
            Your price::
            2968585 LSASR163 LSASR163 W   3 25.4000 1.000 25.4000 1.000 25.4000 1.000 152.4000 6.000 30.480 1.200 LT16ER
              List price:
              $120,83 /each.
              Your price::
              2968586 LSASR164 LSASR164 W   4 25.4000 1.000 25.4000 1.000 25.4000 1.000 152.4000 6.000 36.068 1.420 LT22ER
                List price:
                $126,49 /each.
                Your price::
                2968567 LSASR83 LSASR83 W   3 12.7000 .5000 12.7000 .5000 12.7000 .5000 82.5500 3.250 22.098 .8700 LT16ER
                  List price:
                  $98,85 /each.
                  Your price::
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is no longer available
                  Replacement Product Please contact customer service for assistance

                  ORIGINAL PRODUCT

                  Threading • Laydown

                  Boring Bars
                  (5 Products)
                  • I.D. Internal ThreadingI.D. Internal Threading
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Insert Size [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [D2] Head Diameter [D2] Head Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [GAAP] Axial Rake Angle Gage Insert
                  2968597 S0612LSER2 S0612LSER2 W   2 19.05 .75 12.7000 .5000 9.5250 .3750 7.1120 .2800 177.8000 7.000 25.4000 1.000 -1.500 LT11NR
                    List price:
                    $129,80 /each.
                    Your price::
                    2968599 S0812LSER2 S0812LSER2 W   2 19.05 .75 16.5100 .6500 12.7000 .5000 8.6360 .3400 177.8000 7.000 31.7500 1.250 -1.500 LT11NR
                      List price:
                      $136,48 /each.
                      Your price::
                      2968601 S1012LSER3 S1012LSER3 W   3 19.05 .75 20.3200 .8000 15.8750 .6250 11.6840 .4600 177.8000 7.000 38.1000 1.500 -1.500 LT16NR
                        List price:
                        $155,03 /each.
                        Your price::
                        2968763 S1212LSER3 S1212LSER3 W   3 19.05 .75 22.8600 .9000     12.9540 .5100 177.8000 7.000 39.8780 1.570 -1.500 LT16NR
                          List price:
                          $184,51 /each.
                          Your price::
                          2968765 S1620LSER3 S1620LSER3 W   3 31.75 1.25 30.4800 1.200 25.4000 1.000 16.5100 .6500 254.0000 10.000 63.5000 2.500 -1.500 LT16NR
                            List price:
                            $241,58 /each.
                            Your price::
                            List price:
                            Discount: %
                            Your price::
                            Replacement This item is no longer available
                            Replacement Product Please contact customer service for assistance

                            ORIGINAL PRODUCT

                            Threading • Laydown

                            Threading Inserts
                            (21 Products)
                            View Products
                            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [EX] Profile Distance [EX] Profile Distance [E] Profile Distance [E] Profile Distance Insert Size Thread Pitch INS_IRR_CTLG_THREAD_PITCH_I
                            3122015 3EL035ISO 3EL035ISO TN6025   0.8000 .0310 0.4000 .0160 3 0,35  
                              List price:
                              $29,29 /each.
                              Your price::
                              2008187 3EL10ISO 3EL10ISO TN6025   0.6860 .0270 0.6860 .0270 3 1,0  
                                List price:
                                $26,40 /each.
                                Your price::
                                2018377 3ER05ISO 3ER05ISO TN6025   0.6100 .0240 0.4000 .0157 3 0,50  
                                  List price:
                                  $26,40 /each.
                                  Your price::