D Style Inserts
D-style inserts, also known as diamond-shaped inserts, or diamond 55° rhombic inserts, are versatile cutting tools widely used in several operations including turning. The inset shape is engineered with four cutting edges and are available in carbide, cermet, and carbide. WIDIA Victory D-style inserts are great for roughing, finishing, and profiling tasks. They are commonly used where achieving tight tolerances are essential.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (248)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(248)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(248)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(248)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(248)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(248)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(248)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(248)
- M Stainless Steel (118)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(118)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(118)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(118)
- K Cast Iron (138)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(138)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(138)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(138)
- N Non-Ferrous Materials (20)
- N1Wrought Aluminum (20)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(20)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (20)
- S High-Temp Alloys (137)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(137)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(137)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(137)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(75)
Select All Star
- CN (27)
- DE (109)
- GB (20)
- IN (25)
- SG (46)
- US (44)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (90)
- Lightly Interrupted Cut (185)
- Smooth Cut (233)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 2.0 (101)
- 4.0 (187)
to
Corner Radius
Corner Radius
- 0.004 in(1)
- 0.008 in(9)
- 0.016 in(85)
- 0.031 in(133)
- 0.047 in(51)
- 0.063 in(9)
to
Corner Radius
Corner Radius
- 0.1 mm(1)
- 0.2 mm(9)
- 0.4 mm(85)
- 0.8 mm(133)
- 1.2 mm(51)
- 1.6 mm(9)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- THM (9)
- THM-X (3)
- TN10U (2)
- TN2000 (6)
- TN4000 (3)
- TN6010 (3)
- TN6025 (1)
- WK05CT (7)
- WK15CT (4)
- WK20CT (24)
- WM15CT (13)
- WM25CT (36)
- WM35CT (7)
- WP15CT (49)
- WP20TT (1)
- WP25CT (45)
- WP35CT (9)
- WS10PT (27)
- WS25PT (16)
- WU10HT (11)
- WU10PT (6)
- WU25PT (6)
Wiper Insert
Wiper Insert
- N (284)
- Y (4)
Insert Geometry
Insert IC Size
Insert IC Size
- 6.35 mm(15)
- 9.52 mm(10)
- 9.525 mm(81)
- 12.7 mm(180)
- 15.875 mm(2)
to
Insert IC Size
Insert IC Size
- 0.25 in(15)
- 0.375 in(91)
- 0.5 in(180)
- 0.625 in(2)
to
Cutting Edge Length
Cutting Edge Length
- 7.75 mm(1)
- 7.752 mm(14)
- 11.625 mm(1)
- 11.628 mm(75)
- 11.63 mm(15)
- 15.504 mm(180)
- 19.38 mm(2)
to
Cutting Edge Length
Cutting Edge Length
- 0.3052 in(15)
- 0.4577 in(10)
- 0.4578 in(76)
- 0.458 in(5)
- 0.6104 in(180)
- 0.763 in(2)
to
Chip Breaker CBMD
Chip Breaker CBMD
- 18 (1)
- 22 (1)
- 65 (9)
- B (8)
- CT (1)
- FF (10)
- FP (21)
- FS (18)
- FW (2)
- ML (19)
- MP (9)
- MR (18)
- MS (18)
- MU (36)
- MW (2)
- RH (18)
- UF (13)
- UM (14)
- UR (35)
Cutting Tool Material
Cutting Tool Material
- H T (1)
- H W (286)
Tolerance Class
Tolerance Class
- G (21)
- M (267)
No filters matching ""
