A/B Series Small Hole Tooling

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (32)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (32)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (32)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (32)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (32)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (32)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (32)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (32)
  • M Stainless Steel (32)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (32)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (32)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (32)
  • K Cast Iron (32)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (32)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (32)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (32)
  • N Non-Ferrous Materials (32)
    • N1
      Wrought Aluminum (32)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (32)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (12)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (3)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (3)
    • N6
      Carbon, Graphite Composites, CFRP (3)
    • N7
      MMC's (3)
Applications
Applications
  • ID Grooving ID Grooving (3)
  • ID Thread Turning ID Thread Turning (2)
  • Multiple Direction Cutting Multiple Direction Cutting (6)
  • TRN Boring TRN Boring (21)
Cutting Condition
Cutting Condition
  • Smooth Cut (3)
  • Varying Depth of Cut (3)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (2)
  • 92.0 (14)
  • 92.5 (3)
  • 93.0 (10)
  • 97.0 (3)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • WHISTLE NOTCH 5° A/B BoringBar (32)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (3)
  • 2.0 (3)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.05 in (1)
  • 1.3 in (1)
  • 1.55 in (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 26.675 mm (1)
  • 33.025 mm (1)
  • 39.375 mm (1)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.002 in (3)
  • 0.007 in (3)
  • 0.015 in (3)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (3)
  • 0.176 mm (3)
  • 0.375 mm (3)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • ALO (3)
  • C25 (3)
  • CG5 (3)
  • CG6 (3)
  • CM1 (3)
  • TN7 (3)
  • WDN25U (3)
  • WK20CT (3)
Hand Of Tool
Hand Of Tool
  • R (32)
Wiper Insert
Wiper Insert
  • N (3)
F Dimension
F Dimension
  • 0.65 mm (5)
  • 1.05 mm (4)
  • 1.075 mm (1)
  • 1.175 mm (1)
  • 1.451 mm (5)
  • 1.55 mm (1)
  • 1.85 mm (3)
  • 1.925 mm (3)
  • 2.225 mm (3)
  • 2.401 mm (3)
  • 3.051 mm (2)
  • 3.825 mm (1)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.027 in (5)
  • 0.041 in (4)
  • 0.042 in (1)
  • 0.046 in (1)
  • 0.057 in (5)
  • 0.061 in (1)
  • 0.073 in (3)
  • 0.076 in (3)
  • 0.088 in (3)
  • 0.095 in (3)
  • 0.12 in (2)
  • 0.151 in (1)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.576 mm (5)
  • 2.401 mm (5)
  • 2.801 mm (1)
  • 3.176 mm (5)
  • 3.551 mm (1)
  • 3.95 mm (3)
  • 4.45 mm (3)
  • 4.575 mm (3)
  • 4.75 mm (3)
  • 6.351 mm (2)
  • 7.926 mm (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.062 in (5)
  • 0.095 in (5)
  • 0.11 in (1)
  • 0.125 in (5)
  • 0.14 in (1)
  • 0.156 in (3)
  • 0.176 in (3)
  • 0.18 in (3)
  • 0.187 in (3)
  • 0.25 in (2)
  • 0.312 in (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (21)
  • S (11)
Rake Angle Style
Rake Angle Style
  • NEUTRAL (ZERO) (3)
Maximum Bore Depth
Maximum Bore Depth
  • 0.187 in (1)
  • 0.213 in (2)
  • 0.281 in (3)
  • 0.312 in (3)
  • 0.375 in (4)
  • 0.5 in (8)
  • 0.6 in (1)
  • 0.625 in (2)
  • 0.75 in (2)
  • 0.826 in (1)
  • 0.875 in (1)
  • 1.0 in (2)
  • 1.25 in (1)
  • 2.125 in (1)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 4.75 mm (1)
  • 5.4 mm (2)
  • 7.125 mm (3)
  • 7.926 mm (3)
  • 9.525 mm (4)
  • 12.701 mm (8)
  • 15.25 mm (1)
  • 15.875 mm (2)
  • 19.05 mm (2)
  • 20.951 mm (1)
  • 22.225 mm (1)
  • 25.401 mm (2)
  • 31.75 mm (1)
  • 53.975 mm (1)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • C (13)
  • S (2)
Front-End
Clamp Style
Clamp Style
  • S (2)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (3)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.017 in (1)
  • 0.028 in (1)
  • 0.03 in (1)
  • 0.033 in (2)
  • 0.035 in (1)
  • 0.04 in (1)
  • 0.05 in (2)
  • 0.062 in (1)
  • 0.078 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.426 mm (1)
  • 0.701 mm (1)
  • 0.75 mm (1)
  • 0.826 mm (2)
  • 0.9 mm (1)
  • 1.026 mm (1)
  • 1.276 mm (2)
  • 1.576 mm (1)
  • 1.975 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • D P (3)
  • H T (3)
  • H W (3)
Back-End
Connection Type
Connection Type
  • CYLINDRICAL (32)
Back-End Diameter
Back-End Diameter
  • 3.95 mm (26)
  • 7.926 mm (6)
  • 9.525 mm (1)
  • 12.701 mm (2)
  • 15.875 mm (1)
  • 16.0 mm (1)
  • 19.05 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.156 in (26)
  • 0.312 in (6)
  • 0.375 in (1)
  • 0.5 in (2)
  • 0.625 in (1)
  • 0.63 in (1)
  • 0.75 in (1)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?