C tip kesici uçlar
Filtreler
Filtreler
Filtreleri şurada görüntüle
Metrikİnç
Workpiece Material
Workpiece Material
- P Steel (103)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(103)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(103)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(103)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(103)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(103)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(103)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(103)
- M Stainless Steel (57)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(57)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(57)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(57)
- K Cast Iron (57)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(57)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(57)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(57)
- N Non-Ferrous Materials (21)
- N1Wrought Aluminum (18)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(18)
- N3High-Silicon Aluminum Alloys Si >12.2%(18)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (6)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (18)
- N6Carbon, Graphite Composites, CFRP (18)
- S High-Temp Alloys (60)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(60)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(60)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(60)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(46)
- H Hardened Materials (6)
- H1Hardened Materials 44-48 HRC(6)
- H2Hardened Materials 48-55 HRC(6)
Select All Star
- DE (5)
- GB (2)
- IN (46)
- US (5)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (33)
- Lightly Interrupted Cut (71)
- Smooth Cut (87)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 2.0 (41)
- 4.0 (22)
- 8.0 (46)
-
Corner Radius
Corner Radius
- 0.004 in(3)
- 0.008 in(12)
- 0.016 in(32)
- 0.031 in(42)
- 0.047 in(17)
- 0.063 in(2)
- 0.095 in(1)
-
Corner Radius
Corner Radius
- 0.1 mm(3)
- 0.2 mm(12)
- 0.4 mm(32)
- 0.8 mm(42)
- 1.201 mm(17)
- 1.6 mm(2)
- 2.401 mm(1)
-
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- TN10P (11)
- TN10U (21)
- TN15M (4)
- TN15U (3)
- TN20K (11)
- TN20P (20)
- TN30M (10)
- TN30P (7)
- WS10PT (4)
- WU10HT (3)
- WU10PT (6)
- WU25PT (9)
insertGeometry
Insert IC Size
Insert IC Size
- 6.351 mm(18)
- 9.525 mm(22)
- 12.701 mm(54)
- 15.875 mm(4)
- 19.05 mm(10)
- 25.401 mm(1)
-
Insert IC Size
Insert IC Size
- 0.25 in(18)
- 0.375 in(22)
- 0.5 in(54)
- 0.625 in(4)
- 0.75 in(10)
- 1.0 in(1)
-
Cutting Edge Length
Cutting Edge Length
- 6.45 mm(18)
- 9.675 mm(22)
- 12.9 mm(54)
- 16.125 mm(4)
- 19.35 mm(10)
- 25.8 mm(1)
-
Cutting Edge Length
Cutting Edge Length
- 0.254 in(18)
- 0.381 in(22)
- 0.508 in(54)
- 0.635 in(4)
- 0.762 in(10)
- 1.016 in(1)
-
Chip Breaker CBMD
Chip Breaker CBMD
- 1P (47)
- 2P (8)
- 4P (8)
- 6P (16)
- 7N (16)
Cutting Tool Material
Cutting Tool Material
- C N (2)
- H W (107)
Tolerance Class
Tolerance Class
- G (20)
- M (89)
No filters matching ""
