successfully added to cart
View Cart

Notifications

Mark all as read
Weldon® End Mills • Metric
Weldon® End Mills • Metric
Weldon® End Mills • Metric
Weldon® End Mills • Metric

VSM17™ • Weldon® End Mills • Metric

Weldon® End Mills • Metric

Features and benefits

  • True 90° capability.

  • Increased ramping capability.

  • Superior wall and surface finish.

  • Effective internal coolant feature, precisely reaching the cutting edge.

Uses and application

  • Face MillingFace Milling
  • Helical MillingHelical Milling
  • Ramping: BlankRamping: Blank
  • Slotting: Square EndSlotting: Square End
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • PocketingPocketing
  • Milling - Through CoolantMilling - Through Coolant
  • Shank - Cylindrical  WeldonShank - Cylindrical Weldon

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (3)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (3)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (3)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (3)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (3)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (3)
  • M Stainless Steel (3)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (3)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (3)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (3)
  • K Cast Iron (3)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (3)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (3)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (3)
  • N Non-Ferrous Materials (3)
    • N1
      Wrought Aluminum
      (3)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (3)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (3)
  • S High-Temp Alloys (3)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (3)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (3)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (3)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (3)
  • H Hardened Materials (3)
    • H1
      Hardened Materials 44-48 HRC
      (3)
Select All Star
  • CN (3)
  • DE (3)
Applications
Applications
  • Face Milling Face Milling (3)
  • Pocket Pocket (3)
  • Pocket Helical Pocket Helical (3)
  • Pocket Milling Pocket Milling (3)
  • Profile Milling Profile Milling (3)
  • Ramping Ramping (3)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (3)
  • Shoulder Milling Shoulder Milling (3)
  • Shoulder Roughing Shoulder Roughing (3)
  • Shoulder Square End Shoulder Square End (3)
Cutting Diameter
Cutting Diameter
  • 25.0 mm (1)
  • 32.0 mm (1)
  • 40.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.984 in (1)
  • 1.26 in (1)
  • 1.575 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.638 in (1)
  • 0.641 in (1)
  • 0.647 in (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 16.2 mm (1)
  • 16.3 mm (1)
  • 16.4 mm (1)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 33.0 mm (1)
  • 39.0 mm (2)
Reach Min to Reach Max
Reach
Reach
  • 1.298 in (1)
  • 1.535 in (2)
Reach Min to Reach Max
Corner configuration
Corner Radius
Corner Radius
  • 0.4 mm (3)
  • 0.8 mm (3)
  • 1.2 mm (3)
  • 1.6 mm (3)
  • 2.0 mm (3)
  • 2.4 mm (3)
  • 3.2 mm (3)
  • 4.0 mm (3)
  • 6.0 mm (3)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.016 in (3)
  • 0.031 in (3)
  • 0.0313 in (3)
  • 0.047 in (3)
  • 0.062 in (3)
  • 0.063 in (3)
  • 0.079 in (3)
  • 0.094 in (3)
  • 0.125 in (3)
  • 0.157 in (3)
  • 0.235 in (3)
Corner Radius Min to Corner Radius Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WK15CM (3)
  • WK15PM (3)
  • WN10HM (3)
  • WN25PM (3)
  • WP25PM (3)
  • WP35CM (3)
  • WP40PM (3)
  • WS40PM (3)
  • WU20PM (3)
  • WU35PM (3)
Maximum Ramp Angle
Maximum Ramp Angle
  • 4.0 (1)
  • 5.7 (1)
  • 8.8 (1)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
Front-End
Neck Diameter
Neck Diameter
  • 21.0 mm (1)
  • 28.0 mm (1)
  • 36.0 mm (1)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 0.827 in (1)
  • 1.102 in (1)
  • 1.417 in (1)
Neck Diameter Min to Neck Diameter Max
Back-End
Back-End Diameter
Back-End Diameter
  • 0.984 in (1)
  • 1.26 in (1)
  • 1.574 in (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 25.0 mm (1)
  • 32.0 mm (1)
  • 40.0 mm (1)
Back-End Diameter Min to Back-End Diameter Max
other
Number of Inserts
Number of Inserts
  • 2.0 (1)
  • 3.0 (1)
  • 4.0 (1)
Number of Inserts Min to Number of Inserts Max
Over All Length [L]
Over All Length [L]
  • 90.0 mm (1)
  • 100.0 mm (1)
  • 110.0 mm (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 3.543 in (1)
  • 3.937 in (1)
  • 4.331 in (1)
Over All Length [L] Min to Over All Length [L] Max
Head Length [L2]
Head Length [L2]
  • 33.0 mm (1)
  • 39.0 mm (2)
Head Length [L2] Min to Head Length [L2] Max
Head Length [L2]
Head Length [L2]
  • 1.298 in (1)
  • 1.535 in (2)
Head Length [L2] Min to Head Length [L2] Max
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 3 of 3 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
5988104 VSM17D040Z04B40XD17 VSM17D040Z04B40XD17   40.0000 1.575 40.0 1.574 110.0000 4.331 39.0000 1.535 16.2000 .6380 4 4.000 29800 Y 0.87
    List price:
    $397.38 /each.
    Your price::
    Qty
    5988102 VSM17D025Z02B25XD17 VSM17D025Z02B25XD17   25.0000 .9840 25.0 .984 90.0000 3.543 33.0000 1.298 16.4000 .6470 2 8.800 41800 Y 0.26
      List price:
      $282.61 /each.
      Your price::
      Qty
      5988103 VSM17D032Z03B32XD17 VSM17D032Z03B32XD17   32.0000 1.260 32.0 1.26 100.0000 3.937 39.0000 1.535 16.3000 .6410 3 5.700 34700 Y 0.48
        List price:
        $355.56 /each.
        Your price::
        Qty
        List price:
        Discount: %
        Your price::
        Replacement This item is not available
        Replacement Product This item may be available through a distributor
        Qty

        Sold in pkg. of

        product-image
        Please adjust the following properties from

        ISO Catalog Number

        ANSI Catalog Number

        to find similar products.
        You are about to create a duplicate . Do you want to proceed?
        You are about to delete Do you want to proceed?
        What would you like to rename your to?
        Please enter a valid name
        Please enter a name for the duplicate
        Please enter a valid name
        You are about to add to your My Solutions page. Do you want to proceed?
        Please enter a valid name
        Send a copy of

        Please enter a valid Email
        Please enter a valid name

        We have found the following CAD Drawings

        Select the files you are looking for and download them all at once

        You should be logged to see your dashboard information
        The product/s () you were trying to add to the cart is/are not available, please contact customer service.
        item(s) successfully added to the cart
        View Cart