M1600 • 47° • Shell Mills • Inch

Name: M1600 • 47° • Shell Mills • Inch
SKU: 6921230

M1600 • Shell Mills • Steel and Cast Iron Face Mills at Low Cost per Edge

Metric

Inch

SAP Material Number	6921230
ISO Catalog Number	M1600U250Z05S075ON06
ANSI Catalog Number	M1600U250Z05S075ON06
[D1] Effective Cutting Diameter	63.5000 mm
[D1] Effective Cutting Diameter	2.500 in
[D1MAX] Maximum Cutting Diameter	74.2340 mm
[D1MAX] Maximum Cutting Diameter	2.922 in
[D] Adapter / Shank / Bore Diameter	19.05 mm
[D] Adapter / Shank / Bore Diameter	.75 in
[D6] Hub Diameter	44.4500 mm
[D6] Hub Diameter	1.750 in
[L] Overall Length	40.0050 mm
[L] Overall Length	1.575 in
[LBX] Body Length Maximum	40.0050 mm
[LBX] Body Length Maximum	1.575 in
[L1] Gage Length	40.0050 mm
[L1] Gage Length	1.575 in
[AP1MAX] 1st Maximum Cutting Depth	3.7000 mm
[AP1MAX] 1st Maximum Cutting Depth	.1457 in
Number of Inserts	5
Coolant Supply	Y
Weight Pounds	1.03

See all Product Variants

Uses and application

100018357
Side Milling/Shoulder Milling: Eased Chamfer

Workpiece Materials

P Steel

M Stainless Steel

K Cast Iron

N Non-Ferrous

S High-Temp Alloys

H Hardened Materials

Insert Selection Guide

	Obróbka lekka		Obróbka średnia		Obróbka ciężka
Grupa materiałowa	Geometria	Gatunek	Geometria	Gatunek	Geometria	Gatunek
P1–P2	.S..MM	WP35CM	.S..MM	WP35CM	.S..MM	WU20PM
P3–P4	.S..MM	WP35CM	.S..MM	WP35CM	.S..MM	WU20PM
P5–P6	.S..MM	WP35CM	.S..MM	WP35CM	.S..MM	WP35CM
M1–M2	.S..MM	WU20PM	.S..MM	WU20PM	.S..MM	WU20PM
M3	.S..MM	WP35CM	.S..MM	WP35CM	.S..MM	WP35CM
K1–K2	.S..MM	WK15CM	.S..MM	WK15CM	.S..MM	WU20PM
K3	.S..MM	WU20PM	.S..MM	WU20PM	.S..MM	WK15CM
N1–N2	.S..MM	WU20PM	.S..MM	WU20PM	.S..MM	WU20PM
N3	.S..MM	WU20PM	.S..MM	WU20PM	.S..MM	WU20PM
S1–S2	.S..MM	WU20PM	.S..MM	WU20PM	.S..MM	WU20PM
S3	.S..MM	WU20PM	.S..MM	WU20PM	.S..MM	WU20PM
S4	.S..MM	WP35CM	.S..MM	WU20PM	.S..MM	WU20PM
H1	.S..MM	WU20PM	–	–	–	–

Geometria płytki	Zalecany posuw na ostrze (fz) zależny od % szerokości frezowania (ae)															Geometria płytki
	5%			10%			20%			30%			40–100%
.S..MM	0,26	0,85	1,42	0,19	0,62	1,01	0,14	0,46	0,75	0,12	0,40	0,66	0,11	0,37	0,60	.S..MM

Obróbka lekka

Obróbka średnia

Obróbka ciężka

Obróbka lekka

Obróbka średnia

Obróbka ciężka

Geometria płytki	Zalecany posuw na ostrze (fz) zależny od % szerokości frezowania (ae)															Geometria płytki
	5%			10%			20%			30%			40-100%
.S..MM	.010	.034	.056	.007	.024	.040	.005	.018	.030	.005	.016	.026	.004	.014	.024	.S..MM

Grupa materiałowa		WP35CM			WK15CM			WU20PM
P	1	455	395	370	—	—	—	330	290	270
	2	280	255	230	—	—	—	275	250	200
	3	255	230	205	—	—	—	255	220	175
	4	190	175	160	—	—	—	225	190	150
	5	260	230	210	—	—	—	185	175	150
	6	160	135	110	—	—	—	165	130	100
M	1	205	185	155	—	—	—	205	180	165
	2	185	160	140	—	—	—	185	160	130
	3	145	130	115	—	—	—	140	120	95
K	1	295	265	240	420	385	340	250	220	185
	2	235	210	190	335	295	275	200	180	150
	3	195	175	160	280	250	230	180	150	120
N	1	—	—	—	—	—	—	550	470	400
	2	—	—	—	—	—	—	550	470	400
	3	—	—	—	—	—	—	400	350	300
S	1	—	—	—	—	—	—	40	35	25
	2	—	—	—	—	—	—	40	35	25
	3	—	—	—	—	—	—	50	40	25
	4	—	—	—	—	—	—	70	50	35
H	1	—	—	—	—	—	—	110	80	70

Grupa materiałowa		WP35CM			WK15CM			WU20PM
P	1	1490	1300	1210	—	—	—	1080	950	890
	2	920	840	750	—	—	—	900	820	660
	3	840	750	670	—	—	—	840	720	570
	4	620	570	520	—	—	—	740	620	490
	5	850	750	690	—	—	—	610	570	490
	6	520	440	—	—	—	—	540	430	330
M	1	670	610	510	—	—	—	670	590	540
	2	610	520	460	—	—	—	610	520	430
	3	480	430	380	—	—	—	460	390	310
K	1	970	870	790	1380	1260	1120	820	720	610
	2	770	690	620	1100	970	900	660	590	490
	3	640	570	520	920	820	750	590	490	390
N	1	—	—	—	—	—	—	1800	1540	1310
	2	—	—	—	—	—	—	1800	1540	1310
	3	—	—	—	—	—	—	1310	1150	980
S	1	—	—	—	—	—	—	130	110	80
	2	—	—	—	—	—	—	130	110	80
	3	—	—	—	—	—	—	160	130	80
	4	—	—	—	—	—	—	230	160	110
H	1	—	—	—	—	—	—	360	260	230

Spare Parts for M1600 • 47° • Shell Mills • Inch

3/8-24X1 Socket Head Cap Screw

TORX DRIVER TX15

INSERT SCR M4-0.7 x 11.5 T15

Spare Part ANTI-SEIZE LUBRICANT

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO Catalog Number	Grade

Product Suggestions

Product Family suggestions

Notifications

M1600 • 47° • Shell Mills • Inch