New Customer
Are you new to WIDIA? Create an account and get started.
Create AccountRegistered Customer
Already have an account? Sign in.
Sign InYou are currently using the following account for your cart and purchases:
New Customer
Are you new to WIDIA? Create an account and get started.
Create AccountRegistered Customer
Already have an account? Sign in.
Sign InYou are currently using the following account for your cart and purchases:
VSM890-12
90 Degree Shoulder Mills
8-Edged, Double-Sided True 0° Victory™ Shoulder-Face Mill (VSM)
- Superior Metal Removal Rates (MRR) delivered through high-performance grades and chipbreakers.
- Coarse, medium, and fine pitch cutter density to perfectly translate machining capability into higher productivity.
- New pocket seat design for improved insert seating and great stability at roughing applications.
- Applicable in a wide range of workpiece materials: aluminum, steel, cast iron, titanium, stainless steel, and high-temp alloys.
- Comprehensive standard offering for cutter bodies and inserts to address light machining to heavy roughing jobs.
Tiew This Video on the Features and Benefits of WIDIA Shoulder Mills
An 8-edged solution for shoulder and face milling applications
VSM890 is capable of performing a true 90 degree wall and step down. The cutter bodies feature internal coolant supply and an enhanced user-friendly design with a pocket numbering system. This tool is a roughing tool with embedded finishing capabilities providing best-in-class wall finishing in axial step-down jobs.
For many shop floor setups, no additional finishing is required resulting in shorter machining time and lower tooling cost
Available In:
- Weldon End Mills
- Shell mills an 8-edged solution for shoulder and face milling applications
- True 0° wall and stepping down capability.
- Axial depth of cut capability; Ap1 max up to .386".
- Optimized chip gash design for proper chip evacuation.
- User-friendly pocket numbering system.
- Cutter bodies with internal coolant supply.
- Less bur creation on the workpiece.
Unique insert rake design to reduce and perfectly balance axial and radial cutting forces. Engineered for light machining to heavy roughing in all material groups.
First choice for Non-Ferrous materials.
First choice for Stainless Steel, light machining, and finishing jobs.
First choice for general purpose in all workpiece materials. Engineered for high-feed rates.
Applications
1. Face milling.
2. Full slotting with 100% radial engagement.
3. Shoulder milling with stepping down and great wall finish.
4. Shoulder milling with low axial and high radial engagement.
5. Shoulder milling with low radial and high axial engagement.
6. HPC face milling. First choice to clean up castings.
7. Dynamic/trochoidal slot milling.
8. Z-axis plunge milling.
9. Z-axis contour plunge milling.
10. Z-axis zig-zag slot plunge milling.
Best Practices
True 0° roughing tool with embedded finishing capabilities all in one tool.
Best-in-class wall finish with VSM890-12 in axial stepping-down jobs. For many shop floor setups, no additional finishing is required resulting in shorter machining time and lower tooling cost.
Course Pitch
- Unstable setup.
- Low spindle power.
- High axial depth of cut Ap1.
- Low feed rate.
- Machining aluminum.
- Driven tools.
Medium Pitch
- Regular setup.
- Regular spindle power.
- Medium feed rate.
Fine Pitch
- Rigid setup.
- High spindle power.
- Low axial depth of cut Ap1.
- High feed rate.
- Boost productivity and cut
Get the Facts on Your 90° Shoulder Mills
Learn more about the WIDIA portfolio of 90° shoulder mills. Download this fact sheet to review effective cutting edges, insert styles, diameter range and more.
-
P Steel (53)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(50)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(50)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(50)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(50)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(50)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(53)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(53)
-
-
M Stainless Steel (53)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(53)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(53)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(53)
-
-
K Cast Iron (51)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(51)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(51)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(51)
-
-
N Non-Ferrous Materials (48)
-
N1Wrought Aluminum(48)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(48)
-
N3High-Silicon Aluminum Alloys Si >12.2%(48)
-
-
S High-Temp Alloys (53)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(52)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(52)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(52)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(53)
-
-
H Hardened Materials (48)
-
H1Hardened Materials 44-48 HRC(48)
-
-
DE (16)
-
IN (11)
-
US (16)
-
Chamfer Milling (29)
-
Concave Radius Milling (29)
-
Face Milling (44)
-
ID Thread Turning (7)
-
Pocket (29)
-
Pocket Helical (29)
-
Pocket Milling (44)
-
Pocket Plunge Milling (44)
-
Profile Milling (29)
-
Ramping (29)
-
Shoulder Ball Nose (29)
-
Shoulder Bottom Shoulder (29)
-
Shoulder Milling (44)
-
Shoulder Roughing (44)
-
Shoulder Square End (44)
-
Slot Ball Nose (44)
-
Slot Milling (44)
-
Slot Side (29)
-
Slot Square End (44)
-
Slot T (29)
-
Thread Milling (29)
-
Trochoidal Milling (29)
-
31.75 (1)
-
32.0 (1)
-
38.1 (1)
-
40.0 (1)
-
50.0 (2)
-
50.8 (2)
-
63.0 (2)
-
63.5 (2)
-
76.2 (3)
-
80.0 (3)
-
100.0 (3)
-
101.6 (3)
-
125.0 (3)
-
127.0 (3)
-
152.4 (3)
-
160.0 (3)
-
200.0 (3)
-
203.2 (3)
-
250.0 (1)
-
254.0 (1)
-
1.25 (1)
-
1.2598 (1)
-
1.5 (1)
-
1.5748 (1)
-
1.9685 (2)
-
2.0 (2)
-
2.4803 (2)
-
2.5 (2)
-
3.0 (3)
-
3.1496 (3)
-
3.937 (3)
-
4.0 (3)
-
4.9213 (3)
-
5.0 (3)
-
6.0 (3)
-
6.2992 (3)
-
7.874 (3)
-
8.0 (3)
-
9.8425 (1)
-
10.0 (1)
-
0.3869 (1)
-
0.387 (2)
-
0.3871 (1)
-
0.3872 (39)
-
0.3873 (1)
-
9.8 (44)
-
32.0 (1)
-
57.15 (2)
-
1.2599 (1)
-
2.25 (2)
-
90.0 (44)
-
8.0 (57)
-
0.8 (53)
-
1.6 (48)
-
0.0315 (53)
-
0.063 (48)
-
WK15CM (46)
-
WN25PM (45)
-
WP25PM (47)
-
WP35CM (45)
-
WP40PM (46)
-
WS40PM (47)
-
WU10PM (45)
-
Y (13)
-
S-SQUARE 90 (57)
-
S-SQUARE 90 (13)
-
0.4724 (13)
-
12.0 (13)
-
0.4724 (13)
-
12.0 (13)
-
H W (13)
-
ALP (1)
-
ML (2)
-
MM (10)
-
H (13)
-
0.75 (4)
-
0.8666 (5)
-
0.9843 (1)
-
1.0 (5)
-
1.063 (3)
-
1.26 (3)
-
1.5 (6)
-
1.575 (6)
-
2.0 (3)
-
2.36 (4)
-
2.5 (4)
-
19.05 (4)
-
22.0 (4)
-
22.01 (1)
-
25.0 (1)
-
25.4 (5)
-
27.0 (3)
-
32.0 (3)
-
38.1 (6)
-
40.0 (6)
-
50.8 (3)
-
60.0 (4)
-
63.5 (4)
-
WK15CM (2)
-
WN25PM (1)
-
WP25PM (3)
-
WP35CM (1)
-
WP40PM (2)
-
WS40PM (3)
-
WU10PM (1)
-
VSM890 (57)
-
I (35)
-
M (35)
-
40.0 (9)
-
44.45 (3)
-
50.0 (6)
-
50.8 (3)
-
60.452 (10)
-
63.0 (10)
-
89.0 (1)
-
115.06 (2)
-
1.5748 (5)
-
1.575 (4)
-
1.75 (3)
-
1.9684 (1)
-
1.9685 (4)
-
1.9686 (1)
-
2.0 (3)
-
2.38 (10)
-
2.4803 (9)
-
2.5986 (1)
-
3.504 (1)
-
4.53 (2)
-
32.0 (1)
-
57.15 (2)
-
1.2599 (1)
-
2.25 (2)
-
R (13)
VSM890™-12 • SNHX-ALP • For aluminum and other non-ferrous alloys
SAP Material Number | ISO Catalog Number | ANSI Catalog Number | First Choice | Grade | Cutting Edges per Insert | [LI] Insert Length | [LI] Insert Length | |
---|---|---|---|---|---|---|---|---|
6596397 | SNHX120408PNERALP | SNHX1202PNERALP | WN25PM | 8 | 12.0000 | .4724 |
|
Replacement Product This item may be available through a distributor
VSM890™-12 • SNHX-ML • Precision Finishing and Light Machining
Replacement Product This item may be available through a distributor
VSM890™-12 • SNHX-MM • Universal Geometry for Medium Machining
SAP Material Number | ISO Catalog Number | ANSI Catalog Number | First Choice | Grade | Cutting Edges per Insert | [LI] Insert Length | [LI] Insert Length | |
---|---|---|---|---|---|---|---|---|
6596432 | SNHX120408PNSRMM | SNHX1202PNSRMM | WP40PM | 8 | 12.0000 | .4724 |
|
|
6596431 | SNHX120408PNSRMM | SNHX1202PNSRMM | WP25PM | 8 | 12.0000 | .4724 |
|
|
6596400 | SNHX120408PNSRMM | SNHX1202PNSRMM | WU10PM | 8 | 12.0000 | .4724 |
|
|
6596433 | SNHX120408PNSRMM | SNHX1202PNSRMM | WS40PM | 8 | 12.0000 | .4724 |
|
|
6667462 | SNHX120408PNSRMM | SNHX1202PNSRMM | WK15CM | 8 | 12.0000 | .4724 |
|
|
6797597 | SNHX120408PNSRMM | SNHX1202PNSRMM | WP35CM | 8 | 12.0000 | .4724 |
|
Replacement Product This item may be available through a distributor
SAP Material Number | ISO Catalog Number | ANSI Catalog Number | First Choice | [D1] Effective Cutting Diameter | [D1] Effective Cutting Diameter | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [L] Overall Length | [L] Overall Length | |
---|---|---|---|---|---|---|---|---|---|---|
6596066 | VSM890D032Z03B25SN12 | VSM890D032Z03B25SN12 | 32.0000 | 1.259 | 25.0 | .9843 | 89.0000 | 3.504 |
|
Replacement Product This item may be available through a distributor
SAP Material Number | ISO Catalog Number | ANSI Catalog Number | First Choice | [D1] Effective Cutting Diameter | [D1] Effective Cutting Diameter | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [D6] Hub Diameter | [D6] Hub Diameter | |
---|---|---|---|---|---|---|---|---|---|---|
6596067 | VSM890D040Z04S22SN12 | VSM890D040Z04S22SN12 | 40.0000 | 1.574 | 22.01 | .8666 | 39.4500 | 1.553 |
|
|
6596069 | VSM890D050Z05S22SN12 | VSM890D050Z05S22SN12 | 50.0000 | 1.968 | 22.0 | .8666 | 49.0000 | 1.929 |
|
|
6596070 | VSM890D063Z05S22SN12 | VSM890D063Z05S22SN12 | 63.0000 | 2.480 | 22.0 | .8666 | 49.0000 | 1.929 |
|
|
6596111 | VSM890D063Z07S22SN12 | VSM890D063Z07S22SN12 | 63.0000 | 2.480 | 22.0 | .8666 | 49.0000 | 1.929 |
|
|
6596113 | VSM890D080Z07S27SN12 | VSM890D080Z07S27SN12 | 80.0000 | 3.149 | 27.0 | 1.063 | 60.0000 | 2.362 |
|
|
6596114 | VSM890D080Z09S27SN12 | VSM890D080Z09S27SN12 | 80.0000 | 3.149 | 27.0 | 1.063 | 60.0000 | 2.362 |
|
Replacement Product This item may be available through a distributor
SAP Material Number | ISO Catalog Number | ANSI Catalog Number | First Choice | [D1] Effective Cutting Diameter | [D1] Effective Cutting Diameter | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [L] Overall Length | [L] Overall Length | |
---|---|---|---|---|---|---|---|---|---|---|
6596129 | VSM890D125Z03W100SN12 | VSM890D125Z03W100SN12 | 31.7500 | 1.250 | 25.4 | 1.0 | 115.0600 | 4.530 |
|
|
6596130 | VSM890D150Z04W100SN12 | VSM890D150Z04W100SN12 | 38.1000 | 1.500 | 25.4 | 1.0 | 115.0600 | 4.530 |
|
Replacement Product This item may be available through a distributor
SAP Material Number | ISO Catalog Number | ANSI Catalog Number | First Choice | [D1] Effective Cutting Diameter | [D1] Effective Cutting Diameter | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [D6] Hub Diameter | [D6] Hub Diameter | |
---|---|---|---|---|---|---|---|---|---|---|
6596131 | VSM890D200Z04S075SN12 | VSM890D200Z04S075SN12 | 50.8000 | 2.000 | 19.05 | .75 | 44.4500 | 1.750 |
|
|
6596132 | VSM890D200Z05S075SN12 | VSM890D200Z05S075SN12 | 50.8000 | 2.000 | 19.05 | .75 | 44.4500 | 1.750 |
|
|
6596133 | VSM890D250Z05S075SN12 | VSM890D250Z05S075SN12 | 63.5000 | 2.500 | 19.05 | .75 | 44.4500 | 1.750 |
|
|
6596134 | VSM890D250Z07S075SN12 | VSM890D250Z07S075SN12 | 63.5000 | 2.500 | 19.05 | .75 | 44.4500 | 1.750 |
|
|
6596135 | VSM890D300Z05S100SN12 | VSM890D300Z05S100SN12 | 76.2000 | 3.000 | 25.4 | 1.0 | 55.6260 | 2.190 |
|
|
6596136 | VSM890D300Z07S100SN12 | VSM890D300Z07S100SN12 | 76.2000 | 3.000 | 25.4 | 1.0 | 55.6260 | 2.190 |
|
Replacement Product This item may be available through a distributor