Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read

WGC – Grooving and Cut-Off Tools

WGC

Grooving:

  • First choice for external grooving applications in most workpiece materials 
  • Through coolant capability and efficient coolant delivery for enhanced productivity 
  • Groove width: 2-10mm (0.084"-0.399")
WGC

Cut-Off:

  • Specially-engineered chipbreakers for effective parting/cut-off and deep grooving 
  • Positive geometry for lower forces
  • Groove width: 1,4-8mm (0.055"-0.315")
WGC

Profiling:

  • Full radius chipbreaker for multi-directional turning to generate complex profiles 
  • Rigid design to ensure smooth surface finish 
  • 2-8mm (0.079"-0.315")

Advances Inch (2020)

View Digital Catalog

 

 

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (427)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (427)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (427)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (427)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (427)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (427)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (427)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (427)
  • M Stainless Steel (427)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (427)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (427)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (427)
  • K Cast Iron (419)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (419)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (419)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (419)
  • N Non-Ferrous Materials (419)
    • N1
      Wrought Aluminum
      (419)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (419)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (419)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (419)
    • N6
      Carbon, Graphite Composites, CFRP
      (419)
  • S High-Temp Alloys (427)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (427)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (427)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (427)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (427)
  • H Hardened Materials (191)
    • H1
      Hardened Materials 44-48 HRC
      (191)
    • H2
      Hardened Materials 48-55 HRC
      (191)
Select All Star
  • CN (37)
  • DE (55)
  • GB (18)
  • IN (2)
  • SG (53)
  • US (95)
Applications
Applications
  • Back Boring Back Boring (54)
  • Boring Boring (9)
  • Chamfer Turning Chamfer Turning (36)
  • Cut-Off Cut-Off (316)
  • Deep Grooving Deep Grooving (36)
  • Face Grooving Face Grooving (75)
  • Facing Facing (124)
  • Grooving Grooving (174)
  • ID Facing ID Facing (86)
  • ID Grooving ID Grooving (95)
  • Multiple Direction Cutting Multiple Direction Cutting (20)
  • Plunge Turning Plunge Turning (83)
  • Profiling Profiling (124)
  • TRN Boring TRN Boring (32)
  • Turning Turning (144)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (321)
  • Lightly Interrupted Cut (321)
  • Smooth Cut (321)
  • Varying Depth of Cut (321)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (273)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (32)
  • Cutoff Support Blade A1-A3 (15)
  • Toolholder (180)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (383)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.003 in (26)
  • 0.004 in (145)
  • 0.006 in (74)
  • 0.008 in (234)
  • 0.012 in (61)
  • 0.014 in (81)
  • 0.016 in (215)
  • 0.031 in (143)
  • 0.039 in (68)
  • 0.047 in (40)
  • 0.06 in (67)
  • 0.063 in (67)
  • 0.079 in (49)
  • 0.094 in (49)
  • 0.098 in (26)
  • 0.119 in (32)
  • 0.125 in (32)
  • 0.156 in (23)
  • 0.157 in (23)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.076 mm (26)
  • 0.1 mm (145)
  • 0.151 mm (74)
  • 0.2 mm (234)
  • 0.301 mm (61)
  • 0.325 mm (81)
  • 0.4 mm (215)
  • 0.775 mm (49)
  • 0.8 mm (142)
  • 1.0 mm (68)
  • 1.201 mm (40)
  • 1.5 mm (67)
  • 1.6 mm (67)
  • 2.0 mm (49)
  • 2.375 mm (49)
  • 2.5 mm (26)
  • 3.0 mm (32)
  • 3.176 mm (32)
  • 3.95 mm (23)
  • 4.0 mm (23)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (202)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (202)
Corner Chamfer Min to Corner Chamfer Max
Application
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (54)
  • Lightly Interrupted Cut (54)
  • Smooth Cut (54)
  • Varying Depth of Cut (54)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WS25PT (66)
  • WU10PT (191)
  • WU25PT (409)
  • WU35PT (141)
Hand Of Tool
Hand Of Tool
  • L (106)
  • N (15)
  • R (106)
Wiper Insert
Wiper Insert
  • N (383)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 15.875 mm (2)
  • 16.0 mm (2)
  • 20.0 mm (8)
  • 25.0 mm (8)
  • 31.75 mm (6)
  • 32.0 mm (6)
  • 57.151 mm (12)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.625 in (2)
  • 0.63 in (2)
  • 0.787 in (8)
  • 0.984 in (8)
  • 1.25 in (6)
  • 1.26 in (6)
  • 2.25 in (12)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.787 in (4)
  • 1.26 in (24)
  • 16.0 in (12)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 20.0 mm (4)
  • 32.0 mm (24)
  • 406.401 mm (12)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (195)
  • S (32)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (22)
  • NEUTRAL (ZERO) (10)
  • POSITIVE-ZERO (36)
Maximum Bore Depth
Maximum Bore Depth
  • 0.946 in (2)
  • 1.0 in (2)
  • 1.25 in (4)
  • 1.26 in (2)
  • 1.5 in (4)
  • 1.575 in (2)
  • 1.587 in (2)
  • 1.594 in (2)
  • 1.969 in (2)
  • 1.979 in (2)
  • 1.98 in (2)
  • 2.0 in (4)
  • 2.5 in (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 24.0 mm (2)
  • 25.401 mm (2)
  • 31.75 mm (4)
  • 32.0 mm (2)
  • 38.1 mm (4)
  • 40.0 mm (2)
  • 40.301 mm (2)
  • 40.5 mm (2)
  • 50.0 mm (2)
  • 50.276 mm (2)
  • 50.301 mm (2)
  • 50.801 mm (4)
  • 63.5 mm (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (32)
Front-End
Clamp Style
Clamp Style
  • C (12)
  • M (36)
  • S (28)
  • Y (163)
Cutting Width
Cutting Width
  • 0.055 in (10)
  • 0.079 in (78)
  • 0.084 in (69)
  • 0.094 in (71)
  • 0.095 in (77)
  • 0.098 in (70)
  • 0.119 in (79)
  • 0.123 in (70)
  • 0.125 in (89)
  • 0.13 in (70)
  • 0.157 in (60)
  • 0.162 in (52)
  • 0.187 in (56)
  • 0.188 in (52)
  • 0.192 in (52)
  • 0.197 in (31)
  • 0.202 in (29)
  • 0.237 in (36)
  • 0.241 in (35)
  • 0.25 in (35)
  • 0.255 in (35)
  • 0.281 in (32)
  • 0.312 in (24)
  • 0.315 in (25)
  • 0.317 in (24)
  • 0.32 in (26)
  • 0.375 in (9)
  • 0.38 in (10)
  • 0.399 in (10)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.401 mm (10)
  • 2.0 mm (78)
  • 2.125 mm (69)
  • 2.375 mm (71)
  • 2.401 mm (77)
  • 2.5 mm (70)
  • 3.0 mm (79)
  • 3.125 mm (70)
  • 3.176 mm (89)
  • 3.301 mm (70)
  • 4.0 mm (60)
  • 4.125 mm (52)
  • 4.75 mm (56)
  • 4.775 mm (52)
  • 4.875 mm (52)
  • 5.0 mm (31)
  • 5.125 mm (29)
  • 6.0 mm (36)
  • 6.125 mm (35)
  • 6.351 mm (35)
  • 6.476 mm (35)
  • 7.125 mm (32)
  • 7.926 mm (24)
  • 8.0 mm (25)
  • 8.05 mm (24)
  • 8.125 mm (26)
  • 9.525 mm (9)
  • 9.65 mm (10)
  • 10.125 mm (10)
Cutting Width Min to Cutting Width Max
Insert Shape
Insert Shape
  • PRISMATIC (431)
Cartridge Size
Cartridge Size
  • 50 (24)
  • 65 (10)
Insert Size
Insert Size
  • 10 (8)
  • 2 (44)
  • 3 (44)
  • 4 (36)
  • 5 (16)
  • 6 (20)
  • 8 (16)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.197 in (4)
  • 0.276 in (16)
  • 0.315 in (12)
  • 0.394 in (24)
  • 0.473 in (18)
  • 0.551 in (1)
  • 0.591 in (1)
  • 0.63 in (73)
  • 0.669 in (1)
  • 0.75 in (4)
  • 0.787 in (1)
  • 0.866 in (16)
  • 1.0 in (8)
  • 1.024 in (46)
  • 1.181 in (1)
  • 1.26 in (26)
  • 1.575 in (14)
  • 1.969 in (3)
  • 2.362 in (3)
  • 4.724 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 5.0 mm (4)
  • 7.0 mm (16)
  • 8.0 mm (12)
  • 10.0 mm (24)
  • 12.0 mm (18)
  • 14.0 mm (1)
  • 15.0 mm (1)
  • 16.0 mm (73)
  • 17.0 mm (1)
  • 19.05 mm (4)
  • 20.0 mm (1)
  • 22.0 mm (16)
  • 25.401 mm (8)
  • 26.0 mm (46)
  • 30.0 mm (1)
  • 32.0 mm (26)
  • 40.0 mm (14)
  • 50.0 mm (3)
  • 60.0 mm (3)
  • 120.0 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 6 in (4)
  • 7 in (2)
  • 2.747 in (2)
  • 3.247 in (2)
  • 3.305 in (1)
  • 3.754 in (3)
  • 4.005 in (1)
  • 4.247 in (1)
  • 5.439 in (2)
  • 5.463 in (2)
  • 5.482 in (2)
  • 5.508 in (6)
  • 5.529 in (8)
  • 5.533 in (2)
  • 5.906 in (2)
  • 5.963 in (3)
  • 6.226 in (2)
  • 6.25 in (2)
  • 6.271 in (2)
  • 6.534 in (2)
  • 6.694 in (2)
  • 6.75 in (3)
Gage Length
Gage Length
  • 150 mm (2)
  • 170 mm (2)
  • 69.775 mm (2)
  • 82.476 mm (2)
  • 83.926 mm (1)
  • 95.351 mm (3)
  • 101.7 mm (1)
  • 107.875 mm (1)
  • 138.15 mm (2)
  • 138.75 mm (2)
  • 139.25 mm (2)
  • 139.9 mm (6)
  • 140.4 mm (8)
  • 140.55 mm (2)
  • 151.451 mm (3)
  • 152.4 mm (4)
  • 158.15 mm (2)
  • 158.75 mm (2)
  • 159.25 mm (2)
  • 165.951 mm (2)
  • 171.451 mm (3)
  • 177.8 mm (2)
Insert Geometry
Shape
Shape
  • PRISMATIC (158)
Insert Seat Size
Insert Seat Size
  • 10 (5)
  • 1B (8)
  • 2 (30)
  • 3 (44)
  • 4 (32)
  • 5 (10)
  • 6 (18)
  • 8 (11)
Cutting Tool Material
Cutting Tool Material
  • H W (427)
Back-End
Connection Type
Connection Type
  • BORING BAR (32)
  • CUTOFF BLADE (15)
  • SQUARE SHANK (180)
Back-End Diameter
Back-End Diameter
  • 12.0 mm (2)
  • 12.701 mm (2)
  • 15.875 mm (4)
  • 16.0 mm (4)
  • 19.05 mm (4)
  • 20.0 mm (4)
  • 25.0 mm (6)
  • 25.401 mm (7)
  • 31.701 mm (1)
  • 38.1 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.473 in (2)
  • 0.5 in (2)
  • 0.625 in (4)
  • 0.63 in (4)
  • 0.75 in (4)
  • 0.787 in (4)
  • 0.984 in (6)
  • 1.0 in (7)
  • 1.248 in (1)
  • 1.5 in (1)
Back-End Diameter Min to Back-End Diameter Max
Shank Height
Shank Height
  • 1 in (28)
  • 0.375 in (2)
  • 0.394 in (2)
  • 0.473 in (4)
  • 0.5 in (4)
  • 0.625 in (6)
  • 0.63 in (6)
  • 0.748 in (3)
  • 0.75 in (24)
  • 0.787 in (24)
  • 0.984 in (30)
  • 0.985 in (2)
  • 1.024 in (5)
  • 1.25 in (18)
  • 1.26 in (24)
  • 1.5 in (6)
  • 1.575 in (6)
  • 2.067 in (1)
Shank Height Min to Shank Height Max
Shank Height
Shank Height
  • 25 mm (30)
  • 20 mm (24)
  • 32 mm (23)
  • 16 mm (6)
  • 40 mm (6)
  • 12 mm (4)
  • 26 mm (4)
  • 19 mm (3)
  • 10 mm (2)
  • 9.525 mm (2)
  • 12.701 mm (4)
  • 15.875 mm (6)
  • 19.05 mm (24)
  • 25.026 mm (2)
  • 25.401 mm (28)
  • 25.975 mm (1)
  • 31.75 mm (18)
  • 31.975 mm (1)
  • 38.1 mm (6)
  • 52.5 mm (1)
Shank Height Min to Shank Height Max
Shank Width
Shank Width
  • 1 in (30)
  • 0.065 in (3)
  • 0.072 in (4)
  • 0.095 in (2)
  • 0.134 in (2)
  • 0.174 in (1)
  • 0.213 in (1)
  • 0.276 in (2)
  • 0.375 in (2)
  • 0.394 in (2)
  • 0.473 in (4)
  • 0.5 in (4)
  • 0.625 in (6)
  • 0.63 in (6)
  • 0.75 in (24)
  • 0.787 in (24)
  • 0.984 in (30)
  • 1.25 in (18)
  • 1.26 in (18)
  • 1.5 in (6)
  • 1.575 in (6)
Shank Width Min to Shank Width Max
Shank Width
Shank Width
  • 25 mm (30)
  • 20 mm (24)
  • 32 mm (18)
  • 16 mm (6)
  • 40 mm (6)
  • 12 mm (4)
  • 10 mm (2)
  • 7 mm (2)
  • 1.651 mm (3)
  • 1.8 mm (4)
  • 2.401 mm (2)
  • 3.401 mm (2)
  • 4.4 mm (1)
  • 5.4 mm (1)
  • 9.525 mm (2)
  • 12.701 mm (4)
  • 15.875 mm (6)
  • 19.05 mm (24)
  • 25.401 mm (30)
  • 31.75 mm (18)
  • 38.1 mm (6)
Shank Width Min to Shank Width Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Grooving and Cut-Off • WGC™

WGCM-S-C • WGC Modular Straight Blade with Coolant
(34 Products)
  • Through Coolant: GroovingThrough Coolant: Grooving
  • TurningTurning
  • Cut-OffCut-Off
  • O.D. Deep GroovingO.D. Deep Grooving
  • ProfilingProfiling
  • FacingFacing
  • ChamferingChamfering
  • GroovingGrooving
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [CD] Cutting Depth [CD] Cutting Depth [FS] Secondary F Dimension [FS] Secondary F Dimension Cartridge Size
6498893 WGCM50L0516MC WGCM50L0516MC   5 16.0000 .6299 9.4250 .3711 50
    List price:
    $170,98 /each.
    Your price::
    Qty
    6498460 WGCM50R0312MC WGCM50R0312MC   3 12.0000 .4724 10.4250 .4104 50
      List price:
      $170,98 /each.
      Your price::
      Qty
      6498861 WGCM50R0322MC WGCM50R0322MC   3 22.0000 .8661 10.4250 .4104 50
        List price:
        $170,98 /each.
        Your price::
        Qty
        6498864 WGCM50R0432MC WGCM50R0432MC   4 32.0000 1.259 9.9250 .3907 50
          List price:
          $170,98 /each.
          Your price::
          Qty
          6498869 WGCM65R0616MC WGCM65R0616MC   6 16.0000 .6299 9.8800 .3889 65
            List price:
            $174,30 /each.
            Your price::
            Qty
            6498882 WGCM65R0816MC WGCM65R0816MC   8 16.0000 .6299 9.0000 .3543 65
              List price:
              $174,30 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Grooving and Cut-Off • WGC™

              Integral Straight • Inch
              (58 Products)
              • Through Coolant: GroovingThrough Coolant: Grooving
              • TurningTurning
              • Cut-OffCut-Off
              • O.D. Deep GroovingO.D. Deep Grooving
              • ProfilingProfiling
              • FacingFacing
              • ChamferingChamfering
              • GroovingGrooving
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [CD] Cutting Depth [CD] Cutting Depth [H1] Cutting Height [H1] Cutting Height [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [H2] Head Height [H2] Head Height [L1] Tool Length [L1] Tool Length [FS] Secondary F Dimension [FS] Secondary F Dimension [LH] Head Length [LH] Head Length [CS] Coolant Supply Size Clamp Screw ID Drive Size
              6461967 WGCSML120322C WGCSML120322C   3 22.0000 .8660 19.0500 .7500 19.0500 .7500 19.0500 .7500 28.5500 1.124 114.3000 4.500 17.6300 .6940 43.0000 1.693 M8X1 T30
                List price:
                $174,98 /each.
                Your price::
                Qty
                6461968 WGCSML160326C WGCSML160326C   3 26.0000 1.024 25.4000 1.000 25.4000 1.000 25.4000 1.000