Suggestions

Product Suggestions

Product Categories

Resources

Order Products Online
successfully added to cart
View Cart
COVID-19: How WIDIA is responding

LEARN MORE

M6800 Series

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (106)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (106)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (106)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (106)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (106)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (106)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (106)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (106)
  • M Stainless Steel (106)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (106)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (106)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (106)
  • K Cast Iron (123)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (123)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (123)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (123)
  • N Non-Ferrous Materials (51)
    • N1
      Wrought Aluminum
      (51)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (51)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (51)
  • S High-Temp Alloys (130)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (130)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (130)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (130)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (130)
  • H Hardened Materials (91)
    • H1
      Hardened Materials 44-48 HRC
      (91)
Applications
  • Face Milling Face Milling (74)
  • ID Thread Turning ID Thread Turning (56)
  • Pocket Pocket (67)
  • Pocket Helical Pocket Helical (67)
  • Pocket Milling Pocket Milling (67)
  • Ramping Ramping (67)
  • Shoulder Milling Shoulder Milling (74)
  • Shoulder Square End Shoulder Square End (74)
  • Slot Milling Slot Milling (74)
  • Slot Square End Slot Square End (74)
Cutting Diameter
  • 12.0 (1)
  • 12.7 (1)
  • 14.0 (1)
  • 15.875 (2)
  • 16.0 (4)
  • 17.0 (1)
  • 18.0 (2)
  • 19.05 (4)
  • 20.0 (9)
  • 21.0 (1)
  • 22.0 (2)
  • 25.0 (13)
  • 25.4 (7)
  • 26.0 (1)
  • 28.0 (2)
  • 31.75 (2)
  • 32.0 (11)
  • 33.0 (1)
  • 38.1 (2)
  • 40.0 (5)
  • 50.0 (3)
  • 50.8 (1)
  • 63.0 (1)
  • 63.5 (1)
  • 76.4 (1)
  • 101.6 (1)
to
Cutting Diameter
  • 0.472 (1)
  • 0.5 (1)
  • 0.551 (1)
  • 0.625 (2)
  • 0.63 (4)
  • 0.669 (1)
  • 0.709 (2)
  • 0.75 (4)
  • 0.787 (9)
  • 0.827 (1)
  • 0.866 (2)
  • 0.984 (13)
  • 1.0 (7)
  • 1.024 (1)
  • 1.102 (2)
  • 1.25 (2)
  • 1.26 (11)
  • 1.299 (1)
  • 1.5 (2)
  • 1.575 (5)
  • 1.969 (3)
  • 2.0 (1)
  • 2.48 (1)
  • 2.5 (1)
  • 3.0 (1)
  • 4.0 (1)
to
Cutting Length
  • 0.236 (22)
  • 0.2362 (11)
  • 0.394 (25)
  • 0.618 (13)
  • 0.6181 (9)
to
Cutting Length
  • 6.0 (33)
  • 10.0 (25)
  • 15.7 (22)
to
Reach
  • 18.0 (2)
  • 18.2 (1)
  • 20.1 (3)
  • 20.2 (6)
  • 20.4 (2)
  • 20.5 (2)
  • 23.5 (2)
  • 25.0 (1)
  • 25.2 (5)
  • 25.4 (2)
  • 26.5 (2)
  • 29.5 (2)
  • 30.0 (1)
  • 30.2 (3)
  • 30.5 (2)
  • 30.6 (1)
  • 32.5 (3)
  • 33.1 (1)
  • 36.5 (4)
  • 40.5 (5)
  • 41.2 (1)
  • 50.5 (5)
  • 55.0 (1)
  • 60.0 (2)
  • 60.5 (7)
  • 65.0 (1)
  • 65.5 (6)
to
Reach
  • 0.709 (2)
  • 0.7165 (1)
  • 0.791 (3)
  • 0.795 (3)
  • 0.7953 (3)
  • 0.803 (2)
  • 0.807 (1)
  • 0.8071 (1)
  • 0.925 (2)
  • 0.9843 (1)
  • 0.992 (3)
  • 0.9921 (2)
  • 1.0 (2)
  • 1.043 (2)
  • 1.161 (2)
  • 1.181 (1)
  • 1.189 (3)
  • 1.201 (2)
  • 1.205 (1)
  • 1.28 (3)
  • 1.303 (1)
  • 1.437 (4)
  • 1.594 (3)
  • 1.5945 (2)
  • 1.622 (1)
  • 1.988 (4)
  • 1.9882 (1)
  • 2.1654 (1)
  • 2.3622 (2)
  • 2.3819 (1)
  • 2.382 (6)
  • 2.559 (1)
  • 2.5787 (1)
  • 2.579 (5)
to
Tool Cutting Edge Angle
  • 90.0 (80)
to
Connection Style
  • A-Socket Head Cap Screw (7)
  • Straight-Cylindrical (66)
  • Weldon (7)
Cutting Edges Per Insert
  • 2.0 (130)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.2 (60)
  • 0.4 (90)
  • 0.8 (89)
  • 1.2 (48)
  • 1.65 (23)
  • 1.69 (25)
  • 2.06 (23)
  • 2.1 (22)
  • 2.11 (25)
  • 3.21 (24)
  • 3.24 (25)
to
Corner Radius
  • 0.0079 (36)
  • 0.008 (24)
  • 0.0156 (90)
  • 0.0313 (89)
  • 0.0469 (48)
  • 0.065 (23)
  • 0.0665 (25)
  • 0.0811 (23)
  • 0.0826 (22)
  • 0.0831 (25)
  • 0.1264 (24)
  • 0.1276 (25)
to
Application
Grade Of Cutting Tool
  • THR-S (51)
  • TN6405 (91)
  • TN6425 (84)
  • TN6430 (96)
Hand Of Tool
  • R (80)
Wiper Insert
  • N (56)
Maximum Ramp Angle
  • 0.5 (1)
  • 0.7 (2)
  • 0.8 (2)
  • 1.2 (1)
  • 1.3 (8)
  • 1.5 (9)
  • 1.8 (1)
  • 2.0 (11)
  • 2.5 (11)
  • 3.0 (7)
  • 5.0 (11)
  • 8.0 (7)
to
Front-End
Insert Shape
  • X-PARALLELOGRAM 80 (130)
Center Cutting
Insert Geometry
Shape
  • X-PARALLELOGRAM 80 (56)
Cutting Edge Length
  • 0.276 (17)
  • 0.433 (19)
  • 0.669 (20)
to
Cutting Edge Length
  • 7.0 (17)
  • 11.0 (19)
  • 17.0 (20)
to
Cutting Tool Material
  • H W (56)
Chip Breaker CBMD
  • AL (7)
  • ML (33)
  • MS (16)
Tolerance Class
  • G (7)
  • M (49)
Back-End
Connection Type
  • CYLINDRICAL (73)
  • SHELL MILL (7)
Back-End Diameter
  • 0.4724 (3)
  • 0.5 (1)
  • 0.625 (3)
  • 0.6299 (9)
  • 0.7087 (1)
  • 0.75 (7)
  • 0.7874 (12)
  • 0.8661 (3)
  • 0.9055 (1)
  • 0.9843 (13)
  • 1.0 (7)
  • 1.1811 (1)
  • 1.25 (3)
  • 1.2598 (15)
  • 1.5 (1)
to
Back-End Diameter
  • 12.0 (3)
  • 12.7 (1)
  • 15.875 (3)
  • 16.0 (9)
  • 18.0 (1)
  • 19.05 (7)
  • 20.0 (12)
  • 22.0 (3)
  • 23.0 (1)
  • 25.0 (13)
  • 25.4 (7)
  • 30.0 (1)
  • 31.75 (3)
  • 32.0 (15)
  • 38.1 (1)
to
other
Grade
  • THR-S (7)
  • TN6405 (17)
  • TN6425 (10)
  • TN6430 (22)
Platform
  • M6800 Series (77)
Tool Unit
  • I (78)
  • M (114)
Over All Length [L]
  • 40.0 (5)
  • 50.0 (1)
  • 63.0 (1)
  • 80.0 (2)
  • 83.06 (1)
  • 88.9 (2)
  • 95.25 (1)
  • 100.0 (7)
  • 101.6 (5)
  • 110.0 (8)
  • 110.5 (1)
  • 114.3 (3)
  • 120.0 (10)
  • 129.54 (1)
  • 130.0 (7)
  • 139.7 (1)
  • 140.0 (1)
  • 150.0 (4)
  • 160.0 (4)
  • 170.0 (3)
  • 200.0 (2)
  • 210.0 (4)
  • 240.0 (3)
  • 250.0 (3)
to
Over All Length [L]
  • 1.575 (5)
  • 1.969 (1)
  • 2.48 (1)
  • 3.15 (2)
  • 3.2701 (1)
  • 3.5 (2)
  • 3.75 (1)
  • 3.937 (7)
  • 4.0 (5)
  • 4.331 (8)
  • 4.3504 (1)
  • 4.5 (3)
  • 4.724 (10)
  • 5.1 (1)
  • 5.118 (7)
  • 5.5 (1)
  • 5.512 (1)
  • 5.906 (4)
  • 6.299 (2)
  • 6.2992 (2)
  • 6.693 (3)
  • 7.874 (2)
  • 8.268 (4)
  • 9.4488 (1)
  • 9.449 (2)
  • 9.843 (3)
to
Head Length [L2]
  • 18.0 (2)
  • 18.2 (1)
  • 20.1 (3)
  • 20.2 (6)
  • 20.4 (2)
  • 20.5 (2)
  • 23.5 (2)
  • 25.0 (1)
  • 25.2 (5)
  • 25.4 (2)
  • 26.5 (2)
  • 29.5 (2)
  • 30.0 (1)
  • 30.2 (3)
  • 30.5 (2)
  • 30.6 (1)
  • 32.5 (3)
  • 33.1 (1)
  • 36.5 (4)
  • 40.5 (5)
  • 41.2 (1)
  • 50.5 (5)
  • 55.0 (1)
  • 60.0 (2)
  • 60.5 (7)
  • 65.0 (1)
  • 65.5 (6)
to
Head Length [L2]
  • 0.709 (2)
  • 0.7165 (1)
  • 0.791 (3)
  • 0.795 (3)
  • 0.7953 (3)
  • 0.803 (2)
  • 0.807 (1)
  • 0.8071 (1)
  • 0.925 (2)
  • 0.9843 (1)
  • 0.992 (3)
  • 0.9921 (2)
  • 1.0 (2)
  • 1.043 (2)
  • 1.161 (2)
  • 1.181 (1)
  • 1.189 (3)
  • 1.201 (2)
  • 1.205 (1)
  • 1.28 (3)
  • 1.303 (1)
  • 1.437 (4)
  • 1.594 (3)
  • 1.5945 (2)
  • 1.622 (1)
  • 1.988 (4)
  • 1.9882 (1)
  • 2.1654 (1)
  • 2.3622 (2)
  • 2.3819 (1)
  • 2.382 (6)
  • 2.559 (1)
  • 2.5787 (1)
  • 2.579 (5)
to
Insert Hand
  • R (56)
obsoleteFacet
  • true (136)
  • false (62)
Category Path
Number of Inserts
  • 2.0 (29)
  • 3.0 (15)
  • 4.0 (13)
  • 5.0 (12)
  • 6.0 (3)
  • 7.0 (4)
  • 8.0 (1)
  • 10.0 (1)
  • 12.0 (1)
  • 14.0 (1)
to
No filters matching ""
Narrow by category:
View Products in
Metric
Inch
90° Shoulder Mills • M6800 Series

M6800S Tool Bodies
(3 Products)
  • Milling - Side and FaceMilling - Side and Face
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • Slotting: Square EndSlotting: Square End
  • Face MillingFace Milling
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
3577782 12396430400 12396430400 40.0000 1.575 22.0 .8661 38.0000 1.496 40.0000 1.575 6.0000 .2360 10 30500 Y 0.29
    3577803 12396431000 12396431000 50.0000 1.969 22.0 .8661 40.0000 1.575 40.0000 1.575 6.0000 .2360 12 27700 Y 0.41
      3577804 12396431600 12396431600 63.0000 2.480 22.0 .8661 40.0000 1.575 40.0000 1.575 6.0000 .2360 14 24900 Y 0.56
        List price:
        Discount: %
        Your price::
        Replacement This item is not available
        Replacement Product This item may be available through a distributor
        90° Shoulder Mills • M6800 Series

        M6800S Tool Bodies
        (19 Products)
        • Shank - Cylindrical PlainShank - Cylindrical Plain
        • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
        • Slotting: Square EndSlotting: Square End
        • Face MillingFace Milling
        • Ramping: BlankRamping: Blank
        • PocketingPocketing
        • Helical MillingHelical Milling
        View Products
        SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
        3577805 12396440600 12396440600 12.0000 .4720 12.0 .4724 80.0000 3.150 18.0000 .7090 6.0000 .2360 2 2.000 46200 Y 0.09
          3577806 12396440800 12396440800 14.0000 .5510 12.0 .4724 80.0000 3.150 18.0000 .7090 6.0000 .2360 2 2.000 44800 Y 0.11
            3577807 12396441000 12396441000 16.0000 .6300 16.0 .6299 100.0000 3.937 20.1000 .7910 6.0000 .2360 3 3.000 43200 Y 0.16
              3577808 12396441200 12396441200 16.0000 .6300 16.0 .6299 100.0000 3.937 20.1000 .7910 6.0000 .2360 4 3.000 43200 Y 0.22
                3577809 12396441400 12396441400 17.0000 .6690 16.0 .6299 100.0000 3.937 20.1000 .7910 6.0000 .2360 3 1.500 42400 Y 0.16
                  3577810 12396441600 12396441600 18.0000 .7090 16.0 .6299 100.0000 3.937 20.5000 .8070 6.0000 .2360 3 1.500 41600 Y 0.17
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is not available
                    Replacement Product This item may be available through a distributor
                    90° Shoulder Mills • M6800 Series

                    M6800M Tool Bodies
                    (25 Products)
                    • Shank - Cylindrical PlainShank - Cylindrical Plain
                    • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                    • Slotting: Square EndSlotting: Square End
                    • Face MillingFace Milling
                    • Ramping: BlankRamping: Blank
                    • PocketingPocketing
                    • Helical MillingHelical Milling
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                    3577852 12396461600 12396461600 16.0000 .6300 12.0 .4724 100.0000 3.937 23.5000 .9250 10.0000 .3940 2 3.000 43750 N 0.19
                      3577853 12396461800 12396461800 16.0000 .6300 16.0 .6299 100.0000 3.937 30.5000 1.201 10.0000 .3940 2 3.000 43750 Y 0.25
                        3577854 12396462000 12396462000 18.0000 .7090 16.0 .6299 100.0000 3.937 23.5000 .9250 10.0000 .3940 2 3.000 43000 Y 0.27
                          3577856 12396462400 12396462400 20.0000 .7870 16.0 .6299 110.0000 4.331 26.5000 1.043 10.0000 .3940 3 5.000 41000 Y 0.28
                            3577857 12396462600 12396462600 20.0000 .7870 18.0 .7087 170.0000 6.693 30.6000 1.205 10.0000 .3940 2 5.000 41000 Y 0.38
                              3577858 12396462800 12396462800 20.0000 .7870 20.0 .7874 110.0000 4.331 30.5000 1.201 10.0000 .3940 3 5.000 41000 Y 0.36
                                List price:
                                Discount: %
                                Your price::
                                Replacement This item is not available
                                Replacement Product This item may be available through a distributor
                                90° Shoulder Mills • M6800 Series

                                M6800LX Tool Bodies
                                (11 Products)
                                • Shank - Cylindrical PlainShank - Cylindrical Plain
                                • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                                • Slotting: Square EndSlotting: Square End
                                • Face MillingFace Milling
                                • Ramping: BlankRamping: Blank
                                • PocketingPocketing
                                • Helical MillingHelical Milling
                                View Products
                                SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                                3577887 12396480000 12396480000 25.0000 .9840 20.0 .7874 120.0000 4.724 36.5000 1.437 15.7000 .6180 2 8.000 35000 Y 0.42
                                  3577888 12396480200 12396480200 25.0000 .9840 25.0 .9843 120.0000 4.724 36.5000 1.437 15.7000 .6180 2 8.000 35000 Y 0.56
                                    3577889 12396480400 12396480400 25.0000 .9840 25.0 .9843 160.0000 6.299 60.5000 2.382 15.7000 .6180 2 8.000 35000 Y 0.68
                                      3577890 12396480600 12396480600 25.0000 .9840 25.0 .9843 210.0000 8.268 60.5000 2.382 15.7000 .6180 2 8.000 35000 Y 0.82
                                        3577892 12396481000 12396481000 32.0000 1.260 25.0 .9843 130.0000 5.118 40.5000 1.594 15.7000 .6180 3 5.000 30000 Y 0.62
                                          3577893 12396481200 12396481200 32.0000 1.260 32.0 1.259 130.0000 5.118 40.5000 1.594 15.7000 .6180 3 5.000 30000 Y 0.86
                                            List price:
                                            Discount: %
                                            Your price::
                                            Replacement This item is not available
                                            Replacement Product This item may be available through a distributor
                                            90° Shoulder Mills • M6800 Series

                                            M6800S Tool Bodies
                                            (11 Products)
                                            • Shank - Cylindrical PlainShank - Cylindrical Plain
                                            • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                                            • Slotting: Square EndSlotting: Square End
                                            • Face MillingFace Milling
                                            • Ramping: BlankRamping: Blank
                                            • PocketingPocketing
                                            • Helical MillingHelical Milling
                                            View Products
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                                            3786361 15396440800 15396440800 12.7000 .5000 12.7 .5 83.0600 3.270 18.2000 .7165 6.0000 .2362 2 2.000 45800 Y 0.21
                                              3786362 15396441000 15396441000 15.8750 .6250 15.875 .625 88.9000 3.500 20.2000 .7953 6.0000 .2362 3 3.000 43300 Y 0.32
                                                3786384 15396441800 15396441800 19.0500 .7500 15.875 .625 101.6000 4.000 20.5000 .8071 6.0000 .2362 4 2.000 40900 Y 0.38
                                                  3786385 15396442200 15396442200 19.0500 .7500 19.05 .75 101.6000 4.000 20.2000 .7953 6.0000 .2362 4 2.000 40900 Y 0.50
                                                    3786386 15396442400 15396442400 19.0500 .7500 19.05 .75 101.6000 4.000 20.2000 .7953 6.0000 .2362 5 2.000 40900 Y 0.50
                                                      3786388 15396442800 15396442800 25.4000 1.000 25.4 1.0 114.3000 4.500 25.2000 .9921 6.0000 .2362 5 1.300 36900 Y 0.98
                                                        List price:
                                                        Discount: %
                                                        Your price::
                                                        Replacement This item is not available
                                                        Replacement Product This item may be available through a distributor
                                                        90° Shoulder Mills • M6800 Series

                                                        M6800LX Tool Bodies
                                                        (4 Products)
                                                        • Milling - Side and FaceMilling - Side and Face
                                                        • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                                                        • Slotting: Square EndSlotting: Square End
                                                        • Face MillingFace Milling
                                                        View Products
                                                        SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Pounds
                                                        3786392 15396470400 15396470400 50.8000 2.000 19.05 .75 40.6400 1.600 40.0000 1.575 15.7000 .6181 4 16800 Y 0.98
                                                          3786393 15396471000 15396471000 63.5000 2.500 19.05 .75 40.6400 1.600 40.0000 1.575 15.7000 .6181 5 14400 Y 1.63
                                                            3786394 15396471600 15396471600 76.4000 3.000 25.4 1.0 48.6920 1.917 50.0000 1.969 15.7000 .6181 6 12250 Y 2.34
                                                              3786395 15396477200 15396477200 101.6000 4.000 38.1 1.5 66.5480 2.620 63.0000 2.480 15.7000 .6181 7 10400 Y 4.64
                                                                List price:
                                                                Discount: %
                                                                Your price::
                                                                Replacement This item is not available
                                                                Replacement Product This item may be available through a distributor
                                                                90° Shoulder Mills • M6800 Series

                                                                M6800LX Tool Bodies
                                                                (5 Products)
                                                                • Shank - Cylindrical Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
                                                                • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                                                                • Slotting: Square EndSlotting: Square End
                                                                • Face MillingFace Milling
                                                                • Ramping: BlankRamping: Blank
                                                                • PocketingPocketing
                                                                • Helical MillingHelical Milling
                                                                View Products
                                                                SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                                                                3577771 15396480000 15396480000 25.4000 1.000 19.05 .75 88.9000 3.500 36.5000 1.437 15.7000 .6181 2 8.000 35000 Y 0.93
                                                                  3577772 15396480200 15396480200 25.4000 1.000 25.4 1.0 95.2500 3.750 36.5000 1.437 15.7000 .6181 2 8.000 35000 Y 1.00
                                                                    3577774 15396481000 15396481000 31.7500 1.250 25.4 1.0 101.6000 4.000 40.5000 1.594 15.7000 .6181 3 5.000 30000 Y 1.36
                                                                      3577775 15396481200 15396481200 31.7500 1.250