English
Sign In
Loading Profile
No Items in Cart
COVID-19: How WIDIA is responding

TopGroove™

Select Filters
FiltersX
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (453)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (453)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (453)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (453)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (453)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (453)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (453)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (453)
  • M Stainless Steel (491)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (491)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (491)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (491)
  • K Cast Iron (490)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (490)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (490)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (490)
  • N Non-Ferrous Materials (491)
    • N1
      Wrought Aluminum
      (491)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (491)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (491)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (37)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (491)
    • N6
      Carbon, Graphite Composites, CFRP
      (491)
    • N7
      MMC's
      (37)
  • S High-Temp Alloys (491)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (491)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (491)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (491)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (491)
  • H Hardened Materials (1)
    • H1
      Hardened Materials 44-48 HRC
      (1)
    • H2
      Hardened Materials 48-55 HRC
      (1)
firstChoiceCountry
.product.facets.selectFirstChoice
  • IN (2)
Applications
  • Grooving (680)
  • Cut-Off (674)
  • Face Grooving (674)
  • ID Facing (674)
  • ID Grooving (674)
  • Profiling (674)
  • Facing (479)
  • Plunge Turning (477)
  • ID Thread Turning (230)
  • OD Thread Turning (228)
  • Turning (226)
  • Multiple Direction Cutting (203)
  • Deep Grooving (198)
  • TRN Boring (198)
  • Threading (198)
  • Back Boring (31)
  • Boring (28)
  • Chamfer Turning (1)
Cutting Condition
  • Smooth Cut (472)
  • Varying Depth of Cut (469)
  • Heavily Interrupted Cut (438)
  • Lightly Interrupted Cut (438)
Tool Cutting Edge Angle
to
Connection Style
  • Toolholder (98)
  • Boring Bar Shank (63)
Cutting Edges Per Insert
to
Internal Coolant Capability
Corner configuration
Corner Radius
to
Corner Radius
to
Application
Drilling Condition
  • Smooth Cut (472)
  • Varying Depth of Cut (469)
  • Heavily Interrupted Cut (438)
  • Lightly Interrupted Cut (438)
Grade Of Cutting Tool
  • TN6025 (251)
  • TN6010 (200)
  • THM (37)
  • TN10P (4)
  • WU10HT (1)
  • WU10PT (1)
  • WU25PT (1)
Hand Of Tool
  • R (88)
  • L (73)
Wiper Insert
  • N (495)
F Dimension
to
F Dimension
to
Minimum Bore Diameter
to
Minimum Bore Diameter
to
Minimum Axial Groove Diameter
to
Minimum Axial Groove Diameter
to
Maximum Axial Groove Diameter
to
Maximum Axial Groove Diameter
to
Cutting Direction
  • E (108)
  • S (53)
Rake Angle Style
  • NEUTRAL (ZERO) (161)
Maximum Bore Depth
to
Maximum Bore Depth
to
Boring Bar Material
  • S (63)
Front-End
Clamp Style
  • N (207)
Cutting Width
to
Cutting Width
to
Insert Shape
  • TN-TOP NOTCH (702)
Insert Size
  • 3 (80)
  • 2 (68)
  • 4 (36)
  • 5 (9)
  • 1 (8)
  • 6 (6)
Maximum Cutting Depth
to
Maximum Cutting Depth
to
Insert Geometry
Shape
  • TN-TOP NOTCH (495)
Insert Seat Size
  • 3 (242)
  • 2 (149)
  • 4 (100)
  • 1 (3)
  • 5 (1)
Cutting Tool Material
  • H W (495)
Insert Thickness
to
Insert Thickness
to
Back-End
Connection Type
  • SQUARE SHANK (98)
  • BORING BAR (63)
Back-End Diameter
to
Back-End Diameter
to
Shank Height
to
Shank Height
to
Shank Width
to
Shank Width
to
other
Grade
  • TN6025 (251)
  • W (207)
  • TN6010 (200)
  • THM (37)
  • TN10P (4)
  • WU10HT (1)
  • WU10PT (1)
  • WU25PT (1)
Platform
  • TopGroove (450)
  • TopThread TopGroove (182)
Tool Unit
  • I (634)
  • M (561)
Maximum Cutting Insert Depth
to
Maximum Cutting Insert Depth
to
Drilling Condition Material
  • K-All (472)
  • M-All (472)
  • N-All (472)
  • S-All (472)
  • P-All (443)
  • H-All (247)
Cutting Condition Material
  • K-All (472)
  • M-All (472)
  • N-All (472)
  • S-All (472)
  • P-All (443)
  • H-All (247)
Tool Length
to
Tool Length
to
Insert Hand
  • R (250)
  • L (245)
Over All Length [L]
to
Over All Length [L]
to
No filters matching ""
Narrow by category:
View Products in
Metric
Inch
TopThread™

Boring Bars
(3 Products)
  • I.D. Internal ThreadingI.D. Internal Threading
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Size [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [F] F Dimension [F] F Dimension [A] Coolant Hole Diameter [A] Coolant Hole Dia [CS] Coolant Supply Size Gage Insert Clamp Screw ID Drive Size
3632121 A06NER1 A06NER1 W 1 9.525 .375 11.1760 .4400 7.9250 .3120 152.4000 6.000 31.7500 1.250 6.5530 .2580 3.1750 .1250   N.1L 5/64
3632119 A08NER1 A08NER1 W 1 12.7 .5 11.1760 .4400 7.8740 .3100 203.2000 8.000 32.7660 1.290 6.5530 .2580 2.3880 .0940 1/16-27 NPT N.1L 5/64
3632148 A10NER1 A10NER1 W 1 15.875 .625 20.3200 .8000     254.0000 10.000     10.3120 .4060     1/8-27 NPT N.1L 5/64
TopThread™

Boring Bars
(31 Products)
  • I.D. Internal ThreadingI.D. Internal Threading
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Size [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size Gage Insert Clamp Screw ID Drive Size
3632131 A08NEL2 A08NEL2 W 2 12.7 .5 18.5420 .7300 11.1000 .4370 203.2000 8.000 1/16-27 NPT N.2R 7/64
3632117 A08NER2 A08NER2 W 2 12.7 .5 18.5420 .7300 11.1000 .4370 203.2000 8.000 1/16-27 NPT N.2L 7/64
3632127 A10SNEL2 A10SNEL2 W 2 15.875 .625 25.4000 1.000 12.7000 .5000 254.0000 10.000 1/8-27 NPT N.2R 7/64
3632114 A10SNER2 A10SNER2 W 2 15.875 .625 25.4000 1.000 12.7000 .5000 254.0000 10.000 1/8-27 NPT N.2L 7/64
3632126 A12SNEL2 A12SNEL2 W 2 19.05 .75 28.5800 1.125 14.2700 .5620 254.0000 10.000 1/8-27 NPT N.2R 7/64
3632118 A12SNER2 A12SNER2 W 2 19.05 .75 28.5750 1.125 14.2750 .5620 254.0000 10.000 1/8-27 NPT N.2L 7/64
TopThread™

Boring Bars
(2 Products)
  • I.D. Internal ThreadingI.D. Internal Threading
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Size [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [D2] Head Diameter [D2] Head Diameter [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [F] F Dimension [F] F Dimension [A] Coolant Hole Diameter [A] Coolant Hole Dia [CS] Coolant Supply Size Gage Insert Clamp Screw ID Drive Size
3641648 A10KNNTOR1 A10KNNTOR1 W 1 10.0 .394 11.5000 .4530 9.9800 .3930 125.0000 4.921     7.0000 .2760 3.2000 .1260   NG1L 1.5 mm
3641647 A12MNNTOR1 A12MNNTOR1 W 1 12.0 .47 11.5000 .4530 8.660 .3409 150.0000 5.905 31.3000 1.232 7.0000 .2760 4.0000 .1600 1/16-27 NPT N.1L 1.5 mm
TopThread™

Boring Bars
(17 Products)
  • I.D. Internal ThreadingI.D. Internal Threading
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Size [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [CS] Coolant Supply Size Gage Insert Clamp Screw ID Drive Size
3641655 A12MNNTOL2 A12MNNTOL2 W 2 12.0 .47 18.5000 .7280 150.0000 5.906 11.0000 .4330 1/16-27 NPT NG2R 2.5 mm
3641644 A12MNNTOR2 A12MNNTOR2 W 2 12.0 .47 18.5000 .7280 150.0000 5.906 11.0000 .4330 1/16-27 NPT NG2L 2.5 mm
3641649 A16MNNTOL2 A16MNNTOL2 W 2 16.0 .6299 22.0000 .8661 150.0000 5.905 11.0000 .4331 1/8-27 NPT N.2R 2.5 mm
3641643 A16MNNTOR2 A16MNNTOR2 W 2 16.0 .63 22.0000 .8661 150.0000 5.906 11.0000 .4331 1/8-27 NPT N.2L 2.5 mm
3641652 A20QNNTOL2 A20QNNTOL2 W 2 20.0 .787 26.0000 1.023 180.0000 7.086 13.0000 .5118 1/8-27 NPT N.2R 2.5 mm
3641645 A20QNNTOR2 A20QNNTOR2 W 2 20.0 .7874 26.0000 1.023 180.0000 7.086 13.0000 .5118 1/8-27 NPT N.2L 2.5 mm
TopGroove™

Boring Bars
(10 Products)
  • I.D. Face GroovingI.D. Face Grooving
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [CS] Coolant Supply Size Gage Insert Clamp Screw ID Drive Size
3632137 A16TNSL3 A16TNSL3 W 25.4 1.0 57.1500 2.250 304.8000 12.000 16.2560 .6400 1/4-18 NPT N.3L 25 IP
3632129 A16TNSR3 A16TNSR3 W 25.4 1.0 57.1500 2.250 304.8000 12.000 16.2560 .6400 1/4-18 NPT N.3R 25 IP
3637495 A20UNSL3 A20UNSL3 W 31.75 1.25 57.1500 2.250 355.6000 14.000 19.4310 .7650 1/4-18 NPT N.3L 25 IP
3632135 A20UNSR3 A20UNSR3 W 31.75 1.25 57.1500 2.250 355.6000 14.000 19.4310 .7650 1/4-18 NPT N.3R 25 IP
3637488 A24UNSL3 A24UNSL3 W 38.1 1.5 57.1500 2.250 355.6000 14.000 22.6100 .8900 1/4-18 NPT N.3L 25 IP
3632134 A24UNSR3 A24UNSR3 W 38.1 1.5 57.1500 2.250 355.6000 14.000 22.6100 .8900 1/4-18 NPT N.3R 25 IP
TopThread™

Toolholders
(16 Products)
  • Face GroovingFace Grooving
  • GroovingGrooving
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Size [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth [B3] Head Back Offset [B3] Head Back Offset [L3] Head Back Length [L3] Head Back Length Gage Insert Clamp Screw ID Drive Size
3637531 NASL062D NASL062D W 2 9.5250 .3750 9.5250 .3750 9.5250 .3750 152.4000 6.000 19.050 .7500 8.8900 .3500 3.5050 .1380 1.7780 .0700 22.2250 .8750 N.2L 7/64
3636534 NASL082D NASL082D W 2 12.7000 .5000 12.7000 .5000 12.7000 .5000 152.4000 6.000 19.050 .7500 8.8900 .3500 3.5050 .1380         N.2L 7/64
3637497 NASL083D NASL083D W 3 12.7000 .5000 12.7000 .5000 12.7000 .5000 152.4000 6.000 31.750 1.250 12.7000 .5000 5.3340 .2100 3.1750 .1250 33.6300 1.324 N.3L 25 IP
3641691 NASL1010M2Q NASL1010M2Q W 2 10.0000 .3937 10.0000 .3937 10.0000 .3937 150.0000 5.906 19.000 .7480 9.0000 .3543 3.5100 .1382 2.0300 .0799 19.3500 .7618 N.2L T10
3637489 NASL102B NASL102B W 2 15.8750 .6250 15.8750 .6250 15.8750 .6250 114.3000 4.500 19.050 .7500 8.8900 .3500 3.5050 .1380         N.2L 7/64
3636524 NASL103B NASL103B W 3 15.8750 .6250 15.8750 .6250 15.8750 .6250 114.3000 4.500 31.750 1.250     5.3340 .2100         N.3L 25 IP
TopGroove™

Grooving Inserts
(4 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [W] Cutting Width [W] Cutting Width Insert Size
3607016 NB2L NB2L THM 3.8400 .1510 2
3607064 NB2R NB2R THM 3.8400 .1510 2
3607017 NB3L NB3L THM 4.9500 .1950 3
3607019 NB3R NB3R WU10HT 4.9500 .1950 3
TopThread™

Toolholders
(46 Products)
  • ThreadingThreading
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Insert Size [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth Gage Insert Clamp Screw ID Drive Size
3637525 NEL062 NEL062 W 2 9.5250 .3750 9.5250 .3750 19.0500 .7500 63.5000 2.500 12.700 .5000 12.7000 .5000     3.5050 .1380 N.2R 7/64
3637503 NEL122B NEL122B W 2 19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 12.700 .5000 25.4000 1.000 7.3660 .2900 3.5050 .1380 N.2R 7/64
3632144 NEL123B NEL123B W 3 19.0500 .7500 19.0500 .7500 28.5750 1.125 114.3000 4.500 19.050 .7500 50.8000 2.000     5.3340 .2100 N.3R 25 IP
3641684 NEL1616H2 NEL1616H2 W 2 16.0000 .6300 16.0000 .6300 20.0000 .7870 100.0000 3.937 15.000 .5906 63.5000 2.500     3.5100 .1380 N.2R T10
3637500 NEL162C NEL162C W 2 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 12.700 .5000 25.4000 1.000 10.4140 .4100 3.5050 .1380 N.2R 7/64
3632155 NEL163C NEL163C W 3 25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 19.050 .7500 50.8000 2.000     5.3340 .2100 N.3R 25 IP
TopGroove™

Grooving Inserts
(7 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [W] Cutting Width [W] Cutting Width [APMAX] Profile AP Maximum [APMAX] Profile AP Maximum [RR] Corner Radius [RR] Corner Radius [T] Cuttg Depth [T] Cutting Depth Insert Size
3607322 NF3125LK NF3125LK TN6025 3.1750 .1250 1.0160 .0400 0.1910 .0075 3.8100 .1500 3
3607241 NF3125RK NF3125RK TN6025 3.1750 .1250 1.0160 .0400 0.1910 .0075 3.8100 .1500 3
3607333 NF3156LK NF3156LK TN6025 3.9620 .1560 2.9210 .1150 0.1910 .0075 3.8100 .1500 3
3607428 NF3M200LK NF3M200LK TN6025 2.0000 .0787 1.0200 .0400 0.1910 .0075 1.7800 .0700 3
3607511 NF3M200RK NF3M200RK TN6025 2.0000 .0787 1.0200 .0400 0.1910 .0075 1.7800 .0700 3
3607429 NF3M300LK NF3M300LK TN6025 3.0000 .1181 1.0200 .0400 0.1910 .0075 3.8100 .1500 3
TopGroove™

Grooving Inserts
(7 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [W] Cutting Width [W] Cutting Width [APMAX] Profile AP Maximum [APMAX] Profile AP Maximum [RR] Corner Radius [RR] Corner Radius [T] Cuttg Depth [T] Cutting Depth Insert Size Cutting Edges per Insert
3607293 NFD3125LK NFD3125LK TN6025 3.1750 .1250 1.0160 .0400 0.1910 .0075 6.3500 .2500 3 1
3607296 NFD3125RK NFD3125RK TN6025 3.1750 .1250 1.0160 .0400 0.1910 .0075 6.3500 .2500 3 1
3607464 NFD3M300LK NFD3M300LK TN6025 3.0000 .1181 1.0200 .0400 0.1910 .0075 6.3500 .2500 3 1
3607523 NFD3M300RK NFD3M300RK TN6025 3.0000 .1181 1.0200 .0400 0.1910 .0075 6.3500 .2500 3 1
3607415 NFD4189LK NFD4189LK TN6025 4.8010 .1890 2.9210 .1150 0.5720 .0225 9.5250 .3750 4 1
3607325 NFD4189RK NFD4189RK TN6025 4.8010 .1890 2.9210 .1150 0.5720 .0225 9.5250 .3750 4 1
TopGroove™

Grooving Inserts
(3 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [W] Cutting Width [W] Cutting Width [RR] Corner Radius [RR] Corner Radius [T] Cuttg Depth [T] Cutting Depth Insert Size Cutting Edges per Insert
3636571 NG1047L NG1047L TN6025 1.1940 .0470 0.1910 .0075 1.9050 .0750 1 1
3636569 NG1062L NG1062L TN6025 1.5750 .0620 0.1910 .0075 1.9050 .0750 1 1
3636570 NG1094L NG1094L TN6025 2.3880 .0940 0.1910 .0075 1.9050 .0750 1 1
TopGroove™

Grooving Inserts
(40 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [W] Cutting Width [W] Cutting Width [RR] Corner Radius [RR] Corner Radius [T] Cuttg Depth [T] Cutting Depth Insert Size
3607482 NG2031L NG2031L TN6025 0.7870 .0310 0.0890 .0035 1.2700 .0500 2
3607153 NG2031R NG2031R TN6010 0.7870 .0310 0.0890 .0035 1.2700 .0500 2
3607495 NG2031R NG2031R TN6025 0.7870 .0310 0.0890 .0035 1.2700 .0500 2
3607030 NG2031R NG2031R THM 0.7870 .0310 0.0890 .0035 1.2700 .0500 2
3607330 NG2041R NG2041R TN6025 1.0410 .0410 0.0890 .0035 1.2700 .0500 2
3607498 NG2058L NG2058L TN6025 1.4730 .0580 0.1910 .0075 1.2700 .0500 2
TopGroove™

Grooving Inserts
(181 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [W] Cutting Width [W] Cutting Width [APMAX] Profile AP Maximum [APMAX] Profile AP Maximum [RR] Corner Radius [RR] Corner Radius [T] Cuttg Depth [T] Cutting Depth Insert Size
3607112 NG2031LK NG2031LK TN6010 0.7870 .0310 0.7620 .0300 0.0890 .0035 1.2700 .0500 2
3607443 NG2031LK NG2031LK TN6025 0.7870 .0310 0.7620 .0300 0.0890 .0035 1.2700 .0500 2
3607313 NG2031RK NG2031RK TN6025 0.7870 .0310 0.7620 .0300 0.0900 .0035 1.2700 .0500 2
3607090 NG2031RK NG2031RK TN6010 0.7870 .0310 0.7620 .0300 0.0900 .0035 1.2700 .0500 2
3607376 NG2047LK NG2047LK TN6025 1.1900 .0470 0.7600 .0300 0.0900 .0035 1.2700 .0500 2
3607123 NG2047RK NG2047RK TN6010 1.1940 .0470 0.7620 .0300 0.0890 .0035 1.2700 .0500 2
TopGroove™

Grooving Inserts
(78 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [W] Cutting Width [W] Cutting Width [APMAX] Profile AP Maximum [APMAX] Profile AP Maximum [RR] Corner Radius [RR] Corner Radius [T] Cuttg Depth [T] Cutting Depth Insert Size Cutting Edges per Insert
3606935 NGD2M150LK NGD2M150LK TN6010 1.5000 .0591 1.0900 .0430 0.1910 .0075 4.0600 .1600 2 1
3607402 NGD2M150LK NGD2M150LK TN6025 1.5000 .0591 1.0900 .0430 0.1910 .0075 4.0600 .1600 2 1
3607503 NGD2M150RK NGD2M150RK TN6025 1.5000 .0591 1.0900 .0430 0.1910 .0075 4.0600 .1600 2 1
3606937 NGD2M150RK NGD2M150RK TN6010 1.5000 .0591 1.0900 .0430 0.1910 .0075 4.0600 .1600 2 1
3606936 NGD2M200LK NGD2M200LK TN6010 2.0000 .0787 1.0900 .0430 0.1900 .0075 5.0800 .2000 2 1
3607399 NGD2M200LK NGD2M200LK TN6025 2.0000 .0787 1.0900 .0430