eBore™ Universal
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (27)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(27)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(27)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(27)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(27)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(27)
- M Stainless Steel (27)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(27)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(27)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(27)
- K Cast Iron (23)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(23)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(23)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(23)
- N Non-Ferrous Materials (23)
- N1Wrought Aluminum (23)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(23)
- N3High-Silicon Aluminum Alloys Si >12.2%(23)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (23)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (23)
- N6Carbon, Graphite Composites, CFRP (23)
- N7MMC's (23)
- S High-Temp Alloys (27)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(27)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(27)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(27)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(27)
- H Hardened Materials (23)
- H1Hardened Materials 44-48 HRC(23)
- H2Hardened Materials 48-55 HRC(23)
- H3Hardened Materials 56-60 HRC(23)
- H4Hardened Materials >60 HRC(23)
- C CFRP Materials (23)
- C1CFRP, CFRP / CFRP (23)
- C2CFRP / Aluminium CFRP / Non-Ferrous (23)
Applications
Applications
Blind & Cross Hole Finishing (17)
Blind Hole Finishing (17)
Through & Cross Hole Finishing (17)
Through Hole Finishing (17)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (23)
- Lightly Interrupted Cut (27)
- Smooth Cut (27)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 91.0 (4)
- 92.0 (23)
to
Connection Style
Connection Style
- E-BORE Boring Bar (21)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (17)
- 2.0 (17)
- 3.0 (4)
- 4.0 (17)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 0.65 in(2)
- 0.669 in(3)
- 1.772 in(1)
- 1.891 in(1)
- 2.086 in(1)
- 2.087 in(1)
- 2.165 in(1)
- 2.265 in(1)
- 2.282 in(2)
- 2.479 in(1)
- 2.676 in(1)
- 2.677 in(1)
- 2.873 in(1)
- 3.071 in(1)
- 3.269 in(1)
- 3.661 in(2)
- 3.858 in(2)
- 4.449 in(2)
- 4.843 in(1)
- 5.63 in(1)
to
Over All Length [L]
Over All Length [L]
- 16.5 mm(2)
- 17.0 mm(3)
- 45.0 mm(1)
- 48.0 mm(1)
- 52.975 mm(1)
- 53.0 mm(1)
- 55.0 mm(1)
- 57.5 mm(1)
- 57.975 mm(2)
- 62.975 mm(1)
- 67.976 mm(1)
- 68.0 mm(1)
- 72.976 mm(1)
- 78.0 mm(1)
- 83.0 mm(1)
- 93.0 mm(2)
- 98.0 mm(2)
- 113.0 mm(2)
- 123.0 mm(1)
- 143.0 mm(1)
to
Corner Radius
Corner Radius
- 0.001 in(23)
- 0.002 in(23)
- 0.004 in(27)
- 0.008 in(23)
- 0.016 in(23)
- 0.031 in(23)
to
Corner Radius
Corner Radius
- 0.025 mm(23)
- 0.05 mm(23)
- 0.1 mm(27)
- 0.2 mm(23)
- 0.4 mm(23)
- 0.8 mm(23)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(6)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(6)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- HCK10 (23)
- HK1500 (23)
- HK35 (23)
- HT2 (23)
- HTX (23)
- HWK15 (23)
- K10M (23)
- K10P (23)
- K10U (23)
- K15U (23)
- K20K (23)
- K25M (23)
- K313 (23)
- K68 (23)
- KB1610 (23)
- KB1630 (23)
- KB5610 (23)
- KB5625 (23)
- KB5630 (23)
- KB9610 (23)
- KBH10 (23)
- KBH20 (23)
- KC5010 (23)
- KC5025 (23)
- KC5410 (23)
- KC720 (23)
- KC730 (23)
- KC732 (23)
- KC8050 (23)
- KC810 (23)
- KC850 (23)
- KC9010 (23)
- KC9025 (23)
- KC910 (23)
- KC9105 (23)
- KC9110 (23)
- KC9120 (23)
- KC9125 (23)
- KC9225 (23)
- KC9240 (23)
- KC9240NEW (23)
- KC9315 (23)
- KC9320 (23)
- KC9325 (23)
- KC935 (23)
- KC950 (23)
- KC990 (23)
- KCD25 (23)
- KCK05 (23)
- KCK05B (23)
- KCK15 (23)
- KCK15B (23)
- KCK20 (23)
- KCK20B (23)
- KCM15 (23)
- KCM15B (23)
- KCM25 (23)
- KCM25B (23)
- KCM25S (23)
- KCM35 (23)
- KCP05 (23)
- KCP10 (23)
- KCP10B (23)
- KCP20S (23)
- KCP25 (23)
- KCP25B (23)
- KCP25C (23)
- KCP30 (23)
- KCS10 (23)
- KCS10B (23)
- KCS25S (23)
- KCU10 (27)
- KCU10B (23)
- KCU25 (23)
- KCU25B (23)
- KD050 (23)
- KD081 (23)
- KD1400 (23)
- KD1425 (23)
- KN10S (23)
- KT175 (23)
- KT315 (23)
- KT325 (23)
- KTP10 (23)
- KTP25S (23)
- KU10 (23)
- KU10T (23)
- KU30T (23)
- PB100 (23)
- PB170 (23)
- PB250 (23)
- PB300 (23)
- PD100 (23)
- PD50 (23)
- THM (23)
- THM-X (23)
- TN1000 (23)
- TN10P (23)
- TN10U (23)
- TN15M (23)
- TN15U (23)
- TN2000 (23)
- TN20K (23)
- TN20P (23)
- TN30M (23)
- TN4000 (23)
- TN5015 (23)
- TN5020 (23)
- TN5105 (23)
- TN5120 (23)
- TN7010 (23)
- TN7015 (23)
- TN7025 (23)
- TN7035 (23)
- TN7105 (23)
- TN7110 (23)
- TN7115 (23)
- TN7125 (23)
- TN7135 (23)
- TN8025 (23)
- TTI15 (23)
- TTR (23)
- TTS (23)
- WBH10C (23)
- WBH10P (23)
- WBH10U (23)
- WBH25P (23)
- WDN00U (23)
- WDN25U (23)
- WK05CT (23)
- WK15CT (23)
- WK20CT (23)
- WM15CT (23)
- WM25CT (23)
- WP15CT (23)
- WP20TT (23)
- WP25CT (23)
- WS10PT (23)
- WS25PT (23)
- WU05PT (23)
- WU10HT (23)
- WU10PR (4)
- WU10PT (23)
- WU20HT (23)
- WU25PT (23)
Hand Of Tool
Hand Of Tool
- R (21)
Wiper Insert
Wiper Insert
- N (21)
F Dimension
F Dimension
- 0.151 mm(1)
- 2.825 mm(2)
- 3.825 mm(1)
- 4.75 mm(1)
- 4.775 mm(3)
- 5.75 mm(2)
- 5.775 mm(1)
- 6.75 mm(2)
- 6.775 mm(2)
- 7.325 mm(1)
- 7.75 mm(1)
- 7.775 mm(2)
- 9.775 mm(1)
- 12.275 mm(1)
to
F Dimension
F Dimension
- 0.006 in(1)
- 0.111 in(2)
- 0.151 in(1)
- 0.187 in(1)
- 0.188 in(3)
- 0.226 in(2)
- 0.227 in(1)
- 0.266 in(2)
- 0.267 in(2)
- 0.289 in(1)
- 0.305 in(1)
- 0.306 in(2)
- 0.385 in(1)
- 0.483 in(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 2.0 mm(1)
- 6.0 mm(2)
- 8.0 mm(2)
- 10.0 mm(4)
- 12.0 mm(3)
- 14.0 mm(4)
- 15.0 mm(1)
- 16.0 mm(3)
- 20.0 mm(1)
- 25.0 mm(1)
- 29.0 mm(1)
- 40.0 mm(1)
- 52.0 mm(1)
- 68.0 mm(1)
- 76.0 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.079 in(1)
- 0.237 in(2)
- 0.315 in(2)
- 0.394 in(4)
- 0.473 in(3)
- 0.551 in(4)
- 0.591 in(1)
- 0.63 in(3)
- 0.787 in(1)
- 0.984 in(1)
- 1.143 in(1)
- 1.575 in(1)
- 2.047 in(1)
- 2.677 in(1)
- 2.992 in(1)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 0.315 in(2)
- 0.394 in(2)
- 0.473 in(4)
- 0.551 in(3)
- 0.63 in(4)
- 0.787 in(4)
- 0.984 in(1)
- 1.181 in(1)
- 1.614 in(1)
- 2.087 in(1)
- 2.283 in(1)
- 3.031 in(1)
- 4.016 in(1)
- 5.984 in(1)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 8.0 mm(2)
- 10.0 mm(2)
- 12.0 mm(4)
- 14.0 mm(3)
- 16.0 mm(4)
- 20.0 mm(4)
- 25.0 mm(1)
- 30.0 mm(1)
- 41.0 mm(1)
- 53.0 mm(1)
- 58.0 mm(1)
- 77.0 mm(1)
- 102.0 mm(1)
- 152.0 mm(1)
to
Cutting Direction
Cutting Direction
- E (21)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (21)
Maximum Bore Depth
Maximum Bore Depth
- 0.787 in(1)
- 0.906 in(1)
- 1.102 in(1)
- 1.104 in(1)
- 1.181 in(1)
- 1.298 in(1)
- 1.338 in(1)
- 1.574 in(1)
- 1.693 in(1)
- 1.695 in(1)
- 1.907 in(1)
- 2.165 in(1)
- 2.277 in(1)
- 2.757 in(2)
- 2.953 in(2)
- 3.543 in(2)
- 3.938 in(1)
- 4.724 in(1)
to
Maximum Bore Depth
Maximum Bore Depth
- 20.0 mm(1)
- 23.0 mm(1)
- 28.0 mm(1)
- 28.05 mm(1)
- 30.0 mm(1)
- 32.975 mm(1)
- 33.975 mm(1)
- 39.975 mm(1)
- 43.0 mm(1)
- 43.051 mm(1)
- 48.426 mm(1)
- 55.0 mm(1)
- 57.825 mm(1)
- 70.0 mm(2)
- 75.0 mm(2)
- 90.0 mm(2)
- 100.0 mm(1)
- 120.0 mm(1)
to
Boring Bar Material
Boring Bar Material
- S (21)
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (23)
- W-TRIGON 80 (4)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.157 in(2)
- 0.197 in(2)
- 0.237 in(4)
- 0.276 in(3)
- 0.315 in(4)
- 0.394 in(4)
- 0.492 in(1)
- 0.591 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 4.0 mm(2)
- 5.0 mm(2)
- 6.0 mm(4)
- 7.0 mm(3)
- 8.0 mm(4)
- 10.0 mm(4)
- 12.5 mm(1)
- 15.0 mm(1)
to
Gage Length
Gage Length
- 0.63 in(3)
- 1.891 in(1)
- 2.677 in(1)
- 3.307 in(1)
- 3.938 in(1)
Gage Length
Gage Length
- 16 mm(3)
- 100 mm(1)
- 48 mm(1)
- 68 mm(1)
- 84 mm(1)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (23)
- B L (23)
- C N (23)
- D P (23)
- H T (23)
- H W (23)
Back-End
System Size
System Size
- HSK63A (1)
- KM50TS (1)
Back-End Diameter
Back-End Diameter
- 16.0 mm(28)
- 50.0 mm(1)
- 63.0 mm(1)
to
Back-End Diameter
Back-End Diameter
- 0.63 in(28)
- 1.969 in(1)
- 2.48 in(1)
to
No filters matching ""
