Versatile Face Mill for All Machine Conditions

This versatile, 16-edged face mill for medium roughing or semi-finishing of steel, stainless steel, cast iron and nodular iron components will perform in all machine conditions including low-power machines, unstable, non-rigid set-ups, long overhangs, weak machines, or even weak fixture conditions.

Features and Benefits

  • Universal -MM geometry insert in grades WP35CM, WU20PM, WK15CM
  • 44º cutter lead angle
  • Depth of Cut (DOC): (4mm Ap1 max)
  • Precision ground insert
  • Smart insert design engineered to resist shock loads resulting in longer tool life

Thrive in a Variety of Machine Setups

When you need the lowest cost-per-edge in medium-roughing applications, look no further than M1600. This face mill creates a smooth cut allowing for lower power consumption on the machine which results in a longer life on the spindle giving you more value for your money.

Watch as we put M1600 side milling roughing to the test in cast iron, steel, and stainless steel.

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (22)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(13)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(22)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(22)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(22)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(22)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(22)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(22)
    • M Stainless Steel (22)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(22)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(22)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(22)
    • K Cast Iron (27)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(27)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(27)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(27)
    • N Non-Ferrous Materials (22)
      • N1
        Wrought Aluminum (22)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(22)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(22)
    • S High-Temp Alloys (22)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(21)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(21)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(21)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(22)
    • H Hardened Materials (23)
      • H1
        Hardened Materials 44-48 HRC(23)
    Select All Star
    • CN (14)
    • DE (16)
    • IN (17)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (12)
    • Face MillingFace Milling (19)
    Cutting Diameter
    Cutting Diameter
    • 1.969 in(1)
    • 2.0 in(1)
    • 2.48 in(1)
    • 2.5 in(1)
    • 3.0 in(2)
    • 3.15 in(2)
    • 3.938 in(2)
    • 4.0 in(2)
    • 4.921 in(2)
    • 5.0 in(1)
    • 6.0 in(2)
    • 6.299 in(2)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 50.0 mm(1)
    • 50.801 mm(1)
    • 63.0 mm(1)
    • 63.5 mm(1)
    • 76.2 mm(2)
    • 80.0 mm(2)
    • 100.0 mm(2)
    • 101.601 mm(2)
    • 125.0 mm(2)
    • 127.0 mm(1)
    • 152.4 mm(2)
    • 160.0 mm(2)
    Cutting Diameter MintoCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 60.725 mm(1)
    • 61.526 mm(1)
    • 73.726 mm(1)
    • 74.226 mm(1)
    • 82.65 mm(1)
    • 86.45 mm(1)
    • 86.926 mm(1)
    • 90.726 mm(1)
    • 106.45 mm(1)
    • 108.051 mm(1)
    • 110.726 mm(1)
    • 112.325 mm(1)
    • 131.451 mm(1)
    • 135.725 mm(1)
    • 137.725 mm(1)
    • 158.851 mm(1)
    • 163.125 mm(1)
    • 166.451 mm(1)
    • 170.726 mm(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 2.391 in(1)
    • 2.422 in(1)
    • 2.903 in(1)
    • 2.922 in(1)
    • 3.254 in(1)
    • 3.404 in(1)
    • 3.422 in(1)
    • 3.572 in(1)
    • 4.191 in(1)
    • 4.255 in(1)
    • 4.359 in(1)
    • 4.422 in(1)
    • 5.175 in(1)
    • 5.344 in(1)
    • 5.422 in(1)
    • 6.255 in(1)
    • 6.422 in(1)
    • 6.553 in(1)
    • 6.721 in(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 2.1 mm(7)
    • 3.7 mm(12)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.083 in(7)
    • 0.146 in(12)
    Cutting Length MintoCutting Length Max
    Reach
    Reach
    • 1.575 in(4)
    • 1.75 in(1)
    • 1.969 in(6)
    • 2.0 in(1)
    • 2.38 in(2)
    • 2.48 in(5)
    Reach MintoReach Max
    Reach
    Reach
    • 40.0 mm(4)
    • 44.45 mm(1)
    • 50.0 mm(6)
    • 50.801 mm(1)
    • 60.45 mm(2)
    • 63.0 mm(5)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 42.0 (7)
    • 43.0 (12)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (8)
    • B-Cutter Retention Screw (9)
    • C-Bolt Circle (2)
    Number of Flutes
    Number of Flutes
    • 10 (2)
    • 11 (2)
    • 12 (1)
    • 13 (2)
    • 16 (2)
    • 4 (2)
    • 5 (2)
    • 7 (2)
    • 8 (2)
    • 9 (2)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 4.0 (9)
    • 16.0 (25)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(4)
    • 1.75 in(1)
    • 1.969 in(6)
    • 2.0 in(1)
    • 2.38 in(2)
    • 2.48 in(5)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(4)
    • 44.45 mm(1)
    • 50.0 mm(6)
    • 50.801 mm(1)
    • 60.45 mm(2)
    • 63.0 mm(5)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.0 in(9)
    • 0.031 in(10)
    • 0.047 in(15)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(9)
    • 0.8 mm(10)
    • 1.201 mm(15)
    Corner Radius MintoCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(9)
    • 0.601 mm(10)
    • 0.775 mm(15)
    Corner Chamfer MintoCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(9)
    • 0.024 in(10)
    • 0.031 in(15)
    Corner Chamfer MintoCorner Chamfer Max
    Application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM-F (8)
    • WK15CM (21)
    • WP35CM (13)
    • WU10PM (9)
    • WU20PM (21)
    Hand Of Tool
    Hand Of Tool
    • R (19)
    Wiper Insert
    Wiper Insert
    • Y (8)
    Front-End
    Insert Shape
    Insert Shape
    • O-OCTOGON 135 (25)
    • X-RHOMBIC 83 (9)
    Center Cutting
    Center Cutting
    Insert Geometry
    Shape
    Shape
    • O-OCTOGON 135 (6)
    • X-RHOMBIC 83 (2)
    Insert IC Size
    Insert IC Size
    • 10.0 mm(3)
    • 12.701 mm(2)
    • 16.875 mm(3)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.394 in(3)
    • 0.5 in(2)
    • 0.664 in(3)
    Insert IC Size MintoInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 4.101 mm(3)
    • 6.875 mm(3)
    • 8.725 mm(1)
    Cutting Edge Length MintoCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.161 in(3)
    • 0.271 in(3)
    • 0.345 in(1)
    Cutting Edge Length MintoCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • MM (6)
    Cutting Tool Material
    Cutting Tool Material
    • H W (8)
    Tolerance Class
    Tolerance Class
    • G (6)
    • H (2)
    Back-End
    Connection Type
    Connection Type
    • SHELL MILL (19)
    Back-End Diameter
    Back-End Diameter
    • 19.05 mm(2)
    • 22.0 mm(2)
    • 25.401 mm(2)
    • 27.0 mm(2)
    • 32.0 mm(2)
    • 38.1 mm(3)
    • 40.0 mm(4)
    • 50.801 mm(2)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.75 in(2)
    • 0.866 in(2)
    • 1.0 in(2)
    • 1.063 in(2)
    • 1.26 in(2)
    • 1.5 in(3)
    • 1.575 in(4)
    • 2.0 in(2)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?