successfully added to cart
View Cart

Высочайшая надёжность

Надёжная конструкция сверла в совокупности с 3-мя геометриями режущих головок для обработки различных материалов заготовок. 

Для сверла TDMX была разработана сверхжёсткая система крепления режущих головок к корпусу, гарантирующая высокую надёжность при проведении ответственных операций, таких как: сверление при входе или выходе в наклонную поверхность, сверление пересекающихся отверстий, обработка в нестабильных условиях резания.

WIDIA All-Star-Logo CMYK  png

TDMX входит в программу All-Star. 

Закажите инструменты All-Star с отправкой со склада в тот же день! Узнать больше.

MS

MS

Первый выбор для обработки нержавеющей стали и жаропрочных сплавов.

PK

PK

Первый выбор для сверления стали и чугуна.

FPE

FPE

Геометрия для сверления отверстий с плоским дном.

   

Характеристики продукта:

  • Посадочное гнездо выполнено в виде латинской буквы X, что повышает устойчивость при выполнении трудоемких операций сверления
  • Диапазон диаметров режущих головок от 16 мм до 40 мм
  • Ленточки по всему корпусу для обеспечения прямолинейности и высокого качества отверстия
  • Улучшенное удаление стружки
  • Выход канала СОЖ позади режущей кромки
  • Фланцевый хвостовик для большей жесткости
  • Полированные стружечные канавки обеспечивают улучшенное удаление стружки
  • Посадочные поверхности выполнены по конусу для лучшего центрирования и жёсткости крепления
  • Специализированные сплавы для обработки конкретных материалов
  • Возможность переточки режущей головки до 3-х раз
  • Механизм крепления режущей головки находится в передней части сверла делает возможным менять головку без необходимости в снятии сборки со станка

 

 

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (340)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (340)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (340)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (340)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (340)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (340)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (340)
  • M Stainless Steel (440)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (440)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (440)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (440)
  • K Cast Iron (440)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (440)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (440)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (440)
  • N Non-Ferrous Materials (284)
    • N1
      Wrought Aluminum
      (284)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (284)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (284)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (284)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (284)
    • N6
      Carbon, Graphite Composites, CFRP
      (284)
    • N7
      MMC's
      (284)
  • S High-Temp Alloys (340)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (340)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (340)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (340)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (340)
Select All Star
  • CN (43)
  • DE (52)
  • GB (3)
  • IN (3)
  • US (27)
Applications
Applications
  • Convex Drilling Convex Drilling (184)
  • Drilling Drilling (184)
  • ID Thread Turning ID Thread Turning (100)
  • Inclined Entry Drilling Inclined Entry Drilling (184)
  • Inclined Exit Drilling Inclined Exit Drilling (184)
  • Stacked Plates Drilling Stacked Plates Drilling (184)
Cutting Diameter
Cutting Diameter
  • 16.0 mm (13)
  • 16.2 mm (12)
  • 16.281 mm (13)
  • 16.5 mm (13)
  • 16.667 mm (13)
  • 17.0 mm (13)
  • 17.063 mm (11)
  • 17.064 mm (12)
  • 17.463 mm (12)
  • 17.5 mm (13)
  • 17.6 mm (12)
  • 17.8 mm (12)
  • 17.859 mm (12)
  • 18.0 mm (13)
  • 18.255 mm (12)
  • 18.5 mm (13)
  • 18.651 mm (12)
  • 18.8 mm (12)
  • 19.0 mm (13)
  • 19.05 mm (13)
  • 19.2 mm (12)
  • 19.27 mm (12)
  • 19.45 mm (12)
  • 19.5 mm (13)
  • 19.7 mm (12)
  • 19.84 mm (13)
  • 20.0 mm (13)
  • 20.1 mm (12)
  • 20.2 mm (12)
  • 20.239 mm (12)
  • 20.3 mm (12)
  • 20.4 mm (12)
  • 20.5 mm (13)
  • 20.6 mm (12)
  • 20.65 mm (12)
  • 20.7 mm (12)
  • 20.8 mm (12)
  • 20.9 mm (12)
  • 21.0 mm (13)
  • 21.43 mm (12)
  • 21.5 mm (13)
  • 22.0 mm (13)
  • 22.225 mm (12)
  • 22.45 mm (12)
  • 22.5 mm (13)
  • 23.0 mm (13)
  • 23.5 mm (13)
  • 23.812 mm (12)
  • 24.0 mm (13)
  • 24.5 mm (13)
  • 24.605 mm (12)
  • 25.0 mm (13)
  • 25.4 mm (13)
  • 25.5 mm (13)
  • 25.67 mm (12)
  • 25.7 mm (12)
  • 25.76 mm (12)
  • 25.796 mm (12)
  • 26.0 mm (13)
  • 26.192 mm (12)
  • 26.4 mm (13)
  • 26.5 mm (13)
  • 26.589 mm (12)
  • 27.0 mm (13)
  • 27.5 mm (13)
  • 27.78 mm (12)
  • 28.0 mm (13)
  • 28.176 mm (12)
  • 28.5 mm (13)
  • 28.575 mm (12)
  • 29.0 mm (13)
  • 29.367 mm (12)
  • 29.5 mm (13)
  • 29.764 mm (12)
  • 30.0 mm (13)
  • 30.163 mm (12)
  • 30.5 mm (13)
  • 30.955 mm (12)
  • 31.0 mm (13)
  • 31.5 mm (13)
  • 31.75 mm (13)
  • 32.0 mm (9)
  • 32.5 mm (9)
  • 33.0 mm (9)
  • 33.338 mm (8)
  • 34.0 mm (9)
  • 34.13 mm (8)
  • 34.925 mm (8)
  • 35.0 mm (9)
  • 35.5 mm (9)
  • 36.0 mm (9)
  • 36.5 mm (9)
  • 37.0 mm (9)
  • 37.5 mm (9)
  • 38.0 mm (9)
  • 38.1 mm (9)
  • 38.289 mm (7)
  • 38.5 mm (9)
  • 39.0 mm (9)
  • 39.289 mm (7)
  • 39.5 mm (9)
  • 40.0 mm (9)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.6299 in (13)
  • 0.6378 in (12)
  • 0.641 in (13)
  • 0.6496 in (13)
  • 0.6562 in (13)
  • 0.6693 in (13)
  • 0.6718 in (13)
  • 0.6875 in (12)
  • 0.689 in (13)
  • 0.6929 in (12)
  • 0.7008 in (12)
  • 0.7031 in (12)
  • 0.7087 in (13)
  • 0.7187 in (12)
  • 0.7283 in (13)
  • 0.7343 in (12)
  • 0.7402 in (12)
  • 0.748 in (13)
  • 0.75 in (13)
  • 0.7559 in (12)
  • 0.7587 in (12)
  • 0.7657 in (12)
  • 0.7677 in (13)
  • 0.7756 in (12)
  • 0.7811 in (13)
  • 0.7874 in (13)
  • 0.7913 in (12)
  • 0.7953 in (12)
  • 0.7968 in (12)
  • 0.7992 in (12)
  • 0.8031 in (12)
  • 0.8071 in (13)
  • 0.811 in (12)
  • 0.813 in (12)
  • 0.815 in (12)
  • 0.8189 in (12)
  • 0.8228 in (12)
  • 0.8268 in (13)
  • 0.8437 in (12)
  • 0.8465 in (13)
  • 0.8661 in (13)
  • 0.875 in (12)
  • 0.8839 in (12)
  • 0.8858 in (13)
  • 0.9055 in (13)
  • 0.9252 in (13)
  • 0.9375 in (12)
  • 0.9449 in (13)
  • 0.9646 in (13)
  • 0.9687 in (12)
  • 0.9843 in (13)
  • 1.0 in (13)
  • 1.0039 in (13)
  • 1.0106 in (12)
  • 1.0118 in (12)
  • 1.0142 in (12)
  • 1.0156 in (12)
  • 1.0236 in (13)
  • 1.0312 in (12)
  • 1.0394 in (13)
  • 1.0433 in (13)
  • 1.0468 in (12)
  • 1.063 in (13)
  • 1.0827 in (13)
  • 1.0937 in (12)
  • 1.1024 in (13)
  • 1.1093 in (12)
  • 1.122 in (13)
  • 1.125 in (12)
  • 1.1417 in (13)
  • 1.1562 in (12)
  • 1.1614 in (13)
  • 1.1718 in (12)
  • 1.1811 in (13)
  • 1.1875 in (12)
  • 1.2008 in (13)
  • 1.2187 in (12)
  • 1.2205 in (13)
  • 1.2402 in (13)
  • 1.25 in (13)
  • 1.2598 in (9)
  • 1.2795 in (9)
  • 1.2992 in (9)
  • 1.3125 in (8)
  • 1.3386 in (9)
  • 1.3437 in (8)
  • 1.375 in (8)
  • 1.378 in (9)
  • 1.3976 in (9)
  • 1.4173 in (9)
  • 1.437 in (9)
  • 1.4567 in (9)
  • 1.4764 in (9)
  • 1.4961 in (9)
  • 1.5 in (9)
  • 1.5074 in (7)
  • 1.5157 in (9)
  • 1.5354 in (9)
  • 1.5468 in (7)
  • 1.5551 in (9)
  • 1.5748 in (9)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 1.0236 in (2)
  • 1.063 in (2)
  • 1.1417 in (2)
  • 1.1806 in (1)
  • 1.1811 in (1)
  • 1.2598 in (2)
  • 1.2992 in (2)
  • 1.378 in (2)
  • 1.4173 in (2)
  • 1.4961 in (2)
  • 1.5354 in (2)
  • 1.6142 in (2)
  • 1.6535 in (2)
  • 1.7323 in (2)
  • 1.7715 in (1)
  • 1.7717 in (1)
  • 1.8504 in (2)
  • 1.8898 in (2)
  • 2.0079 in (2)
  • 2.126 in (2)
  • 2.2441 in (2)
  • 2.3621 in (1)
  • 2.3622 in (1)
  • 2.4803 in (2)
  • 2.5984 in (2)
  • 2.6992 in (1)
  • 2.7165 in (2)
  • 2.8346 in (2)
  • 2.9528 in (2)
  • 3.0709 in (2)
  • 3.189 in (2)
  • 3.3071 in (2)
  • 3.3465 in (1)
  • 3.3469 in (1)
  • 3.4252 in (2)
  • 3.5432 in (1)
  • 3.5433 in (3)
  • 3.6614 in (2)
  • 3.7402 in (2)
  • 3.7795 in (2)
  • 3.937 in (2)
  • 4.0157 in (2)
  • 4.1339 in (2)
  • 4.252 in (2)
  • 4.3307 in (2)
  • 4.4882 in (2)
  • 4.5276 in (2)
  • 4.7244 in (4)
  • 4.9213 in (2)
  • 5.1181 in (2)
  • 5.315 in (2)
  • 5.3543 in (2)
  • 5.5118 in (2)
  • 5.6693 in (2)
  • 5.7087 in (2)
  • 5.9055 in (2)
  • 5.9843 in (2)
  • 6.1024 in (2)
  • 6.2992 in (2)
  • 6.2993 in (1)
  • 6.6142 in (2)
  • 6.6929 in (2)
  • 6.9291 in (2)
  • 7.0866 in (2)
  • 7.2441 in (2)
  • 7.4803 in (2)
  • 7.5591 in (2)
  • 7.874 in (4)
  • 8.0315 in (2)
  • 8.189 in (2)
  • 8.5039 in (4)
  • 8.8189 in (2)
  • 8.9764 in (2)
  • 9.1339 in (2)
  • 9.4488 in (4)
  • 9.7638 in (2)
  • 9.9213 in (2)
  • 10.0787 in (2)
  • 10.3937 in (2)
  • 10.7087 in (2)
  • 10.8661 in (2)
  • 11.3386 in (4)
  • 11.8109 in (1)
  • 11.811 in (1)
  • 11.9685 in (2)
  • 12.2835 in (2)
  • 12.5984 in (2)
  • 12.7559 in (2)
  • 13.2283 in (2)
  • 13.7008 in (2)
  • 14.1731 in (1)
  • 14.1733 in (1)
  • 14.6457 in (2)
  • 15.1181 in (2)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 26.0 mm (2)
  • 27.0 mm (2)
  • 29.0 mm (2)
  • 30.0 mm (2)
  • 32.0 mm (2)
  • 33.0 mm (2)
  • 35.0 mm (2)
  • 36.0 mm (2)
  • 38.0 mm (2)
  • 39.0 mm (2)
  • 41.0 mm (2)
  • 42.0 mm (2)
  • 44.0 mm (2)
  • 45.0 mm (2)
  • 47.0 mm (2)
  • 48.0 mm (2)
  • 51.0 mm (2)
  • 54.0 mm (2)
  • 57.0 mm (2)
  • 60.0 mm (2)
  • 63.0 mm (2)
  • 66.0 mm (2)
  • 69.0 mm (2)
  • 72.0 mm (2)
  • 75.0 mm (2)
  • 78.0 mm (2)
  • 81.0 mm (2)
  • 84.0 mm (2)
  • 85.0 mm (2)
  • 87.0 mm (2)
  • 90.0 mm (4)
  • 93.0 mm (2)
  • 95.0 mm (2)
  • 96.0 mm (2)
  • 100.0 mm (2)
  • 102.0 mm (2)
  • 105.0 mm (2)
  • 108.0 mm (2)
  • 110.0 mm (2)
  • 114.0 mm (2)
  • 115.0 mm (2)
  • 120.0 mm (4)
  • 125.0 mm (2)
  • 130.0 mm (2)
  • 135.0 mm (2)
  • 136.0 mm (2)
  • 140.0 mm (2)
  • 144.0 mm (2)
  • 145.0 mm (2)
  • 150.0 mm (2)
  • 152.0 mm (2)
  • 155.0 mm (2)
  • 160.0 mm (4)
  • 168.0 mm (2)
  • 170.0 mm (2)
  • 176.0 mm (2)
  • 180.0 mm (2)
  • 184.0 mm (2)
  • 190.0 mm (2)
  • 192.0 mm (2)
  • 200.0 mm (4)
  • 204.0 mm (2)
  • 208.0 mm (2)
  • 216.0 mm (4)
  • 224.0 mm (2)
  • 228.0 mm (2)
  • 232.0 mm (2)
  • 240.0 mm (4)
  • 248.0 mm (2)
  • 252.0 mm (2)
  • 256.0 mm (2)
  • 264.0 mm (2)
  • 272.0 mm (2)
  • 276.0 mm (2)
  • 288.0 mm (4)
  • 299.997 mm (1)
  • 300.0 mm (1)
  • 304.0 mm (2)
  • 312.0 mm (2)
  • 320.0 mm (2)
  • 324.0 mm (2)
  • 336.0 mm (2)
  • 348.0 mm (2)
  • 360.0 mm (2)
  • 372.0 mm (2)
  • 384.0 mm (2)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Connection Style
Connection Style
  • Cylindrical Shank 1 Flat (152)
  • Straight-Cylindrical w/Flange (32)
Number of Flutes
Number of Flutes
  • 2 (184)
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Chamfer
Corner Chamfer
  • 0.0 in (256)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (256)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WM15PD (284)
  • WP40PD (340)
Hand Of Tool
Hand Of Tool
  • R (184)
Wiper Insert
Wiper Insert
  • N (256)
Drill Type
Drill Type
  • 86-01 (184)
frontEnd
Point Angle
Point Angle
  • 140.0 (384)
  • 150.0 (240)
Point Angle Min to Point Angle Max
insertGeometry
Shape
Shape
  • TDMX DRILL (256)
Insert Seat Size
Insert Seat Size
  • A (14)
  • B (17)
  • C (12)
  • D (20)
  • E (26)
  • F (8)
  • G (10)
  • H (8)
  • I (8)
  • J (17)
  • K (13)
  • L (8)
  • M (10)
  • N (10)
  • O (10)
  • P (9)
  • Q (11)
  • R (13)
  • S (12)
  • T (20)
Cutting Tool Material
Cutting Tool Material
  • H W (256)
Cutting Diameter Insert
Cutting Diameter Insert
  • 16.0 mm (3)
  • 16.2 mm (2)
  • 16.281 mm (3)
  • 16.5 mm (3)
  • 16.667 mm (3)
  • 17.0 mm (3)
  • 17.063 mm (1)
  • 17.064 mm (2)
  • 17.463 mm (2)
  • 17.5 mm (3)
  • 17.6 mm (2)
  • 17.8 mm (2)
  • 17.859 mm (2)
  • 18.0 mm (3)
  • 18.255 mm (2)
  • 18.5 mm (3)
  • 18.651 mm (2)
  • 18.8 mm (2)
  • 19.0 mm (3)
  • 19.05 mm (3)
  • 19.2 mm (2)
  • 19.27 mm (2)
  • 19.45 mm (2)
  • 19.5 mm (3)
  • 19.7 mm (2)
  • 19.84 mm (3)
  • 20.0 mm (3)
  • 20.1 mm (2)
  • 20.2 mm (2)
  • 20.239 mm (2)
  • 20.3 mm (2)
  • 20.4 mm (2)
  • 20.5 mm (3)
  • 20.6 mm (2)
  • 20.65 mm (2)
  • 20.7 mm (2)
  • 20.8 mm (2)
  • 20.9 mm (2)
  • 21.0 mm (3)
  • 21.43 mm (2)
  • 21.5 mm (3)
  • 22.0 mm (3)
  • 22.225 mm (2)
  • 22.45 mm (2)
  • 22.5 mm (3)
  • 23.0 mm (3)
  • 23.5 mm (3)
  • 23.812 mm (2)
  • 24.0 mm (3)
  • 24.5 mm (3)
  • 24.605 mm (2)
  • 25.0 mm (3)
  • 25.4 mm (3)
  • 25.5 mm (3)
  • 25.67 mm (2)
  • 25.7 mm (2)
  • 25.76 mm (2)
  • 25.796 mm (2)
  • 26.0 mm (3)
  • 26.192 mm (2)
  • 26.4 mm (3)
  • 26.5 mm (3)
  • 26.589 mm (2)
  • 27.0 mm (3)
  • 27.5 mm (3)
  • 27.78 mm (2)
  • 28.0 mm (3)
  • 28.176 mm (2)
  • 28.5 mm (3)
  • 28.575 mm (2)
  • 29.0 mm (3)
  • 29.367 mm (2)
  • 29.5 mm (3)
  • 29.764 mm (2)
  • 30.0 mm (3)
  • 30.163 mm (2)
  • 30.5 mm (3)
  • 30.955 mm (2)
  • 31.0 mm (3)
  • 31.5 mm (3)
  • 31.75 mm (3)
  • 32.0 mm (3)
  • 32.5 mm (3)
  • 33.0 mm (3)
  • 33.338 mm (2)
  • 34.0 mm (3)
  • 34.13 mm (2)
  • 34.925 mm (2)
  • 35.0 mm (3)
  • 35.5 mm (3)
  • 36.0 mm (3)
  • 36.5 mm (3)
  • 37.0 mm (3)
  • 37.5 mm (3)
  • 38.0 mm (3)
  • 38.1 mm (3)
  • 38.289 mm (1)
  • 38.5 mm (3)
  • 39.0 mm (3)
  • 39.289 mm (1)
  • 39.5 mm (3)
  • 40.0 mm (3)
Cutting Diameter Insert Min