Suggestions

Product Suggestions

Product Categories

Resources

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read

High Performance Modular Solid Carbide End Mills • DUO-λOCK®

Increased Productivity enabled by the strength of Duo-Lock by Haimer and WIDIA connection systems.

VariMill modular combines the highest runout accuracy and length repeatability with maximum coupling stability. 

The flexible VariMill modular system targets applications like those of solid carbide end mills. A wide range of diameters between 10-32mm and multiple corner configurations such as sharp chamfer and radii are available from stock.

 

View Products

Features and Benefits:

  • Less cutting forces and pressure on cutting edge through tailored axial and radial rake angles
  • Proprietary tapered core provides highest tool stability in roughing and finishing applications
  • Eccentric relief design increases tool life through higher edge stability

View Catalogs

Advances Inch (2018)

Featuring our Advances 2018 products.

Download PDF or

View Digital Catalog

Advances Metric (2018)

Featuring our Advances 2018 products.

Download PDF or

View Digital Catalog

DUO-λOCK® Products

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (275)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (177)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (177)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (177)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (187)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (231)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (275)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (226)
  • M Stainless Steel (231)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (231)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (231)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (231)
  • K Cast Iron (187)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (187)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (187)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (187)
  • N Non-Ferrous Materials (70)
    • N1
      Wrought Aluminum
      (70)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (70)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (70)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (70)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (70)
    • N6
      Carbon, Graphite Composites, CFRP
      (22)
    • N7
      MMC's
      (22)
  • S High-Temp Alloys (235)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (235)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (230)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (235)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (230)
  • H Hardened Materials (275)
    • H1
      Hardened Materials 44-48 HRC
      (275)
    • H2
      Hardened Materials 48-55 HRC
      (203)
    • H3
      Hardened Materials 56-60 HRC
      (15)
Select All Star
  • DE (17)
  • GB (5)
  • US (17)
Applications
Applications
  • Chamfer Milling Chamfer Milling (6)
  • Concave Radius Milling Concave Radius Milling (16)
  • Face Milling Face Milling (187)
  • Pocket Pocket (306)
  • Pocket Helical Pocket Helical (222)
  • Pocket Milling Pocket Milling (306)
  • Pocket Plunge Milling Pocket Plunge Milling (78)
  • Profile Milling Profile Milling (20)
  • Ramping Ramping (217)
  • Shoulder Ball Nose Shoulder Ball Nose (20)
  • Shoulder Milling Shoulder Milling (306)
  • Shoulder Roughing Shoulder Roughing (189)
  • Shoulder Square End Shoulder Square End (286)
  • Slot Ball Nose Slot Ball Nose (57)
  • Slot Milling Slot Milling (212)
  • Slot Square End Slot Square End (192)
Cutting Diameter
Cutting Diameter
  • 0.375 in (33)
  • 0.3937 in (26)
  • 0.4724 in (27)
  • 0.5 in (39)
  • 0.625 in (38)
  • 0.6287 in (2)
  • 0.6299 in (25)
  • 0.75 in (31)
  • 0.7874 in (28)
  • 0.9843 in (27)
  • 1.0 in (34)
  • 1.25 in (10)
  • 1.2598 in (8)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 9.525 mm (33)
  • 10.0 mm (26)
  • 12.0 mm (27)
  • 12.7 mm (39)
  • 15.875 mm (38)
  • 15.968 mm (2)
  • 16.0 mm (25)
  • 19.05 mm (31)
  • 20.0 mm (28)
  • 25.0 mm (27)
  • 25.4 mm (34)
  • 31.75 mm (10)
  • 32.0 mm (8)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.762 mm (1)
  • 1.0 mm (1)
  • 1.5 mm (1)
  • 1.524 mm (3)
  • 1.905 mm (1)
  • 2.0 mm (3)
  • 2.54 mm (1)
  • 3.0 mm (4)
  • 3.048 mm (3)
  • 3.175 mm (1)
  • 4.0 mm (2)
  • 6.35 mm (1)
  • 14.288 mm (27)
  • 14.29 mm (1)
  • 15.0 mm (23)
  • 17.5 mm (1)
  • 18.0 mm (22)
  • 18.55 mm (1)
  • 19.05 mm (34)
  • 23.312 mm (1)
  • 23.812 mm (29)
  • 23.813 mm (5)
  • 24.0 mm (23)
  • 28.575 mm (30)
  • 30.0 mm (28)
  • 37.5 mm (27)
  • 38.1 mm (34)
  • 47.625 mm (10)
  • 48.0 mm (8)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.03 in (1)
  • 0.0394 in (1)
  • 0.0591 in (1)
  • 0.06 in (3)
  • 0.075 in (1)
  • 0.0787 in (3)
  • 0.1 in (1)
  • 0.1181 in (4)
  • 0.12 in (3)
  • 0.125 in (1)
  • 0.1575 in (2)
  • 0.25 in (1)
  • 0.5625 in (29)
  • 0.5626 in (1)
  • 0.5906 in (23)
  • 0.689 in (1)
  • 0.7087 in (22)
  • 0.7303 in (1)
  • 0.75 in (34)
  • 0.9178 in (1)
  • 0.9375 in (34)
  • 0.9449 in (23)
  • 1.125 in (30)
  • 1.1811 in (28)
  • 1.4764 in (27)
  • 1.5 in (34)
  • 1.875 in (9)
  • 1.8875 in (1)
  • 1.8898 in (8)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.8425 in (30)
  • 0.8465 in (1)
  • 0.8474 in (1)
  • 0.8523 in (1)
  • 0.8858 in (23)
  • 0.8898 in (1)
  • 0.8937 in (2)
  • 1.063 in (23)
  • 1.0708 in (1)
  • 1.0709 in (3)
  • 1.126 in (35)
  • 1.1299 in (1)
  • 1.1309 in (1)
  • 1.1324 in (1)
  • 1.1357 in (1)
  • 1.4016 in (1)
  • 1.4055 in (34)
  • 1.4104 in (1)
  • 1.4113 in (1)
  • 1.4139 in (1)
  • 1.4146 in (1)
  • 1.4152 in (1)
  • 1.417 in (1)
  • 1.4173 in (22)
  • 1.4252 in (1)
  • 1.4272 in (1)
  • 1.689 in (30)
  • 1.7087 in (1)
  • 1.7717 in (27)
  • 1.772 in (1)
  • 2.2244 in (24)
  • 2.2441 in (3)
  • 2.252 in (33)
  • 2.2717 in (1)
  • 2.803 in (1)
  • 2.8031 in (9)
  • 2.8228 in (7)
  • 2.823 in (1)
Reach Min to Reach Max
Reach
Reach
  • 21.4 mm (30)
  • 21.5 mm (1)
  • 21.524 mm (1)
  • 21.648 mm (1)
  • 22.5 mm (23)
  • 22.6 mm (1)
  • 22.7 mm (2)
  • 27.0 mm (23)
  • 27.2 mm (4)
  • 28.6 mm (35)
  • 28.7 mm (1)
  • 28.724 mm (1)
  • 28.762 mm (1)
  • 28.848 mm (1)
  • 35.6 mm (1)
  • 35.7 mm (34)
  • 35.824 mm (1)
  • 35.848 mm (1)
  • 35.913 mm (1)
  • 35.93 mm (1)
  • 35.946 mm (1)
  • 36.0 mm (23)
  • 36.2 mm (1)
  • 36.25 mm (1)
  • 42.9 mm (30)
  • 43.4 mm (1)
  • 45.0 mm (28)
  • 56.5 mm (24)
  • 57.0 mm (3)
  • 57.2 mm (32)
  • 57.25 mm (1)
  • 57.7 mm (1)
  • 71.2 mm (10)
  • 71.7 mm (8)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (6)
  • 90.0 (322)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • DUO-LOCK (328)
Number of Flutes
Number of Flutes
  • 10 (25)
  • 2 (8)
  • 3 (40)
  • 4 (112)
  • 5 (66)
  • 6 (18)
  • 7 (44)
  • 8 (15)
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Style
Corner Style
  • BALL NOSE (20)
  • CHAMFER (40)
  • RADIUS (229)
  • SQUARE END (39)
Corner Radius
Corner Radius
  • 0.0 in (60)
  • 0.015 in (17)
  • 0.0197 in (12)
  • 0.0295 in (8)
  • 0.03 in (34)
  • 0.0394 in (26)
  • 0.0591 in (1)
  • 0.06 in (28)
  • 0.0787 in (30)
  • 0.09 in (28)
  • 0.1181 in (21)
  • 0.12 in (22)
  • 0.1575 in (11)
  • 0.1875 in (2)
  • 0.1969 in (2)
  • 0.2362 in (2)
  • 0.25 in (11)
  • 0.3125 in (2)
  • 0.315 in (2)
  • 0.375 in (2)
  • 0.3937 in (2)
  • 0.4921 in (2)
  • 0.5 in (2)
  • 0.9 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (60)
  • 0.381 mm (17)
  • 0.5 mm (12)
  • 0.75 mm (8)
  • 0.762 mm (34)
  • 1.0 mm (26)
  • 1.5 mm (1)
  • 1.524 mm (28)
  • 2.0 mm (30)
  • 2.286 mm (28)
  • 3.0 mm (21)
  • 3.048 mm (23)
  • 4.0 mm (11)
  • 4.762 mm (2)
  • 5.0 mm (2)
  • 6.0 mm (2)
  • 6.35 mm (11)
  • 7.938 mm (2)
  • 8.0 mm (2)
  • 9.525 mm (2)
  • 10.0 mm (2)
  • 12.5 mm (2)
  • 12.7 mm (2)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (288)
  • 0.5 mm (22)
  • 0.508 mm (12)
  • 1.905 mm (1)
  • 2.0 mm (1)
  • 2.54 mm (1)
  • 3.0 mm (1)
  • 3.175 mm (1)
  • 4.0 mm (1)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (288)
  • 0.0197 in (22)
  • 0.02 in (12)
  • 0.075 in (1)
  • 0.0787 in (1)
  • 0.1 in (1)
  • 0.1181 in (1)
  • 0.125 in (1)
  • 0.1575 in (1)
Corner Chamfer Min to Corner Chamfer Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • UNCOATED (48)
  • WP15PE (98)
  • WS15PE (182)
Hand Of Tool
Hand Of Tool
  • R (328)
Rough Finish
Rough Finish
  • F (298)
  • R (30)
Front-End
Front End Type
Front End Type
  • DLK - DUO-LOCK Modular Connect (86)
Front End Style
Front End Style
  • DLK01 DUO-LOCK (86)
Gage Length
Gage Length
  • 2.1650 in (1)
  • 2.2500 in (1)
  • 2.5000 in (2)
  • 2.5590 in (2)
  • 2.7500 in (1)
  • 2.7560 in (1)
  • 3.0000 in (1)
  • 3.1500 in (3)
  • 3.2500 in (2)
  • 3.5000 in (2)
  • 3.5430 in (2)
  • 3.7400 in (1)
  • 3.7500 in (2)
  • 3.9370 in (1)
  • 4.0000 in (1)
  • 4.1340 in (3)
  • 4.2500 in (2)
  • 4.5000 in (2)
  • 4.5280 in (2)
  • 4.7240 in (2)
  • 5.0000 in (2)
  • 5.5000 in (1)
  • 5.5120 in (1)
  • 6.2500 in (3)
  • 6.2990 in (3)
  • 7.5000 in (5)
  • 7.8740 in (5)
  • 9.8430 in (7)
  • 10.0000 in (7)
Gage Length
Gage Length
  • 55.0000 mm (1)
  • 57.1400 mm (1)
  • 63.5000 mm (2)
  • 65.0000 mm (2)
  • 69.8500 mm (1)
  • 70.0000 mm (1)
  • 76.2000 mm (1)
  • 80.0000 mm (3)
  • 82.5500 mm (2)
  • 88.9000 mm (2)
  • 90.0000 mm (2)
  • 95.0000 mm (1)
  • 95.2500 mm (2)
  • 100.0000 mm (1)
  • 101.6000 mm (1)
  • 105.0000 mm (3)
  • 107.9500 mm (2)
  • 114.3000 mm (2)
  • 115.0000 mm (2)
  • 120.0000 mm (2)
  • 127.0000 mm (2)
  • 139.7000 mm (1)
  • 140.0000 mm (1)
  • 158.7500 mm (3)
  • 160.0000 mm (3)
  • 190.5000 mm (5)
  • 200.0000 mm (5)
  • 250.0000 mm (7)
  • 254.0000 mm (7)
Center Cutting
Center Cutting
Back-End
Connection Type
Connection Type
  • DUO-LOCK (328)
Back-End Diameter
Back-End Diameter
  • 9.125 mm (33)
  • 9.6 mm (26)
  • 11.5 mm (27)
  • 12.2 mm (39)
  • 15.375 mm (38)
  • 15.5 mm (27)
  • 18.55 mm (31)
  • 19.3 mm (28)
  • 24.0 mm (27)
  • 24.4 mm (34)
  • 30.75 mm (10)
  • 31.0 mm (8)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.3593 in (33)
  • 0.378 in (26)
  • 0.4528 in (27)
  • 0.4803 in (39)
  • 0.6053 in (38)
  • 0.6102 in (27)
  • 0.7303 in (31)
  • 0.7598 in (28)
  • 0.9449 in (27)
  • 0.9606 in (34)
  • 1.2106 in (10)
  • 1.2205 in (8)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Modular End Milling

Modular End Milling
(11 Products)
  • SAFE-LOCK ShankSAFE-LOCK Shank
  • Balance (G 2.5/25,000)Balance (G 2.5/25,000)
  • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
  • Shank: Duo-Lock CouplingShank: Duo-Lock Coupling
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [CSWS] System Size Workpiece Side [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L] Overall Length [L] Overall Length [L20] Beta Taper End Length [L20] Beta Taper End Length Weight Pounds
6136862 SS050SLDL100250 SS050SLDL100250   DL10 12.7 .5 9.1200 .3590 63.5000 2.500 20.3300 .8000 0.11
    List price:
    $199.73 /each.
    Your price::
    6136866 SS075SLDL100450 SS075SLDL100450 DL10 19.05 .75 9.1200 .3590 114.3000 4.500 56.6100 2.229 0.42  
      List price:
      $285.25 /each.
      Your price::
      6136872 SS075SLDL120425 SS075SLDL120425 DL12 19.05 .75 12.2000 .4800 107.9500 4.250 38.9700 1.534 0.45  
        List price:
        $255.05 /each.
        Your price::
        6136876 SS075SLDL160325 SS075SLDL160325 DL16 19.05 .75 15.3800 .6050 82.5500 3.250 20.8000 .8190 0.34  
          List price:
          $234.95 /each.
          Your price::
          6136882 SS100SLDL200375 SS100SLDL200375 DL20 25.4 1.0 18.5500 .7300 95.2500 3.750 38.9400 1.533 0.67  
            List price:
            $293.82 /each.
            Your price::
            6136886 SS125SLDL250425 SS125SLDL250425 DL25 31.75 1.25 24.4000 .9610 107.9500 4.250 41.6900 1.641 1.19  
              List price:
              $328.91 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor

              ORIGINAL PRODUCT

              Modular End Milling

              Modular End Milling
              (6 Products)
              • Balance (G 2.5/25,000)Balance (G 2.5/25,000)
              • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
              • Shank: Duo-Lock CouplingShank: Duo-Lock Coupling
              • Shank - Safe-Lock ≤h6Shank - Safe-Lock ≤h6
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [CSWS] System Size Workpiece Side [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L] Overall Length [L] Overall Length [L2] Usable Length [L2] Usable Length Weight Kilograms
              6134889 SS10SLDL10055M SS10SLDL10055M DL10 10.0 .394 9.5800 .3770 55.0000 2.165 5.5000 .2165 0.03  
                List price:
                $146.44 /each.
                Your price::
                6135043 SS12SLDL12065M SS12SLDL12065M DL12 12.0 .4724 11.5000 .4530 65.0000 2.559 6.5000 .2600 0.05  
                  List price:
                  $163.67 /each.
                  Your price::
                  6135049 SS16SLDL16070M SS16SLDL16070M DL16 16.0 .6299 15.5000 .6100 70.0000 2.756 8.5000 .3300 0.09  
                    List price:
                    $172.25 /each.
                    Your price::
                    6135057 SS20SLDL20080M SS20SLDL20080M DL20 20.0 .7874 19.3000 .7600 80.0000 3.150 10.5000 .4100 0.16  
                      List price:
                      $215.30 /each.
                      Your price::
                      6135063 SS25SLDL25090M SS25SLDL25090M DL25 25.0 .9843 24.0000 .9450 90.0000 3.543 13.0000 .5100 0.27  
                        List price:
                        $241.12 /each.
                        Your price::
                        6135067 SS32SLDL32105M SS32SLDL32105M   DL32 32.0 1.259 31.0000 1.220 105.0000 4.134 16.5000 .6500 0.52
                          List price:
                          $284.17 /each.
                          Your price::
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor

                          ORIGINAL PRODUCT

                          Modular End Milling

                          Modular End Milling
                          (11 Products)
                          • Balance (G 2.5/25,000)Balance (G 2.5/25,000)
                          • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                          • Shank: Duo-Lock CouplingShank: Duo-Lock Coupling
                          • Shank - Safe-Lock ≤h6Shank - Safe-Lock ≤h6
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [CSWS] System Size Workpiece Side [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L] Overall Length [L] Overall Length [L20] Beta Taper End Length [L20] Beta Taper End Length Weight Kilograms
                          6135041 SS12SLDL10065M SS12SLDL10065M DL10 12.0 .4724 9.5800 .3770 65.0000 2.559 13.8100 .5440 0.05  
                            List price:
                            $204.97 /each.
                            Your price::
                            6135053 SS20SLDL12105M SS20SLDL12105M DL12 20.0 .7874 11.5000 .4530 105.0000 4.134 48.5200 1.910 0.20  
                              List price:
                              $261.94 /each.
                              Your price::
                              6135055 SS20SLDL16080M SS20SLDL16080M DL16 20.0 .7874 15.5000 .6100 80.0000 3.150 25.6600 1.010 0.16  
                                List price:
                                $241.12 /each.
                                Your price::
                                6135061 SS25SLDL20095M SS25SLDL20095M DL20 25.0 .9843 19.3000 .7600 95.0000 3.740 32.5200 1.280 0.30  
                                  List price:
                                  $301.43 /each.
                                  Your price::
                                  6135065 SS32SLDL25105M SS32SLDL25105M   DL25 32.0 1.259 24.0000 .9450 105.0000 4.134 45.6600 1.798 0.52
                                    List price:
                                    $337.60 /each.
                                    Your price::
                                    6135069 SS40SLDL32140M SS40SLDL32140M DL32 40.0 1.574 31.0000 1.220 140.0000 5.512 51.3700 2.023 1.13  
                                      List price:
                                      $397.91 /each.
                                      Your price::
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor

                                      ORIGINAL PRODUCT

                                      Modular End Milling

                                      Modular End Milling
                                      (6 Products)
                                      • Balance (G 2.5/25,000)Balance (G 2.5/25,000)
                                      • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
                                      • Shank: Duo-Lock CouplingShank: Duo-Lock Coupling
                                      • SAFE-LOCK ShankSAFE-LOCK Shank
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [CSWS] System Size Workpiece Side [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L] Overall Length [L] Overall Length [L2] Usable Length [L2] Usable Length Torque Foot Pounds
                                      6136800 SS038SLDL100225 SS038SLDL100225 DL10 9.525 .375 9.1200 .3590 57.1400 2.250 4.7600 .1870 18.4000  
                                        List price:
                                        $142.63 /each.
                                        Your price::
                                        6136868 SS050SLDL120250 SS050SLDL120250 DL12 12.7 .5 12.2000 .4800 63.5000 2.500 6.3500 .2500 22.1000  
                                          List price:
                                          $159.41 /each.
                                          Your price::
                                          6136874 SS062SLDL160275 SS062SLDL160275   DL16 15.875 .625 15.3800 .6050 69.8500 2.750 8.4000 .3300 44.2000
                                            List price:
                                            $167.84 /each.
                                            Your price::
                                            6136880 SS075SLDL200300 SS075SLDL200300 DL20 19.05 .75 18.5500 .7300 76.2000 3.000 9.5700 .3945 59.0000  
                                              List price:
                                              $209.84 /each.
                                              Your price::
                                              6136884 SS100SLDL250350 SS100SLDL250350 DL25 25.4 1.0 24.4000 .9610 88.9000 3.500 13.2000 .5195 73.8000  
                                                List price:
                                                $234.95 /each.
                                                Your price::
                                                6136888 SS125SLDL320400 SS125SLDL320400 DL32 31.75 1.25 30.7500 1.211 101.6000 4.000 16.4000 .6400 95.9000  
                                                  List price:
                                                  $276.94 /each.
                                                  Your price::
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is not available
                                                  Replacement Product This item may be available through a distributor

                                                  ORIGINAL PRODUCT

                                                  High-Performance DUO-λOCK® Modular End Mills • VariMill™

                                                  VariMill Ball Nose • 4XN0 • Asymmetrical Flute Spacing
                                                  (5 Products)
                                                  • Slotting: Ball NoseSlotting: Ball Nose
                                                  • Side Milling/Shoulder Milling: Ball NoseSide Milling/Shoulder Milling: Ball Nose
                                                  • 3D Profiling3D Profiling
                                                  • Corner Style: Ball NoseCorner Style: Ball Nose
                                                  • Helix Angle: 38°Helix Angle: 38°
                                                  • Tool Dimensions: Flute Configuration: 4Tool Dimensions: Flute Configuration: 4
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L1] Gage Length [L1] Gage Length [CSMS] System Size Machine Side [WF] Width of Flat [WF] Width of Flat [Z] Number of Flutes
                                                  6071128 4XN01000DL10 4XN01000DL10 WP15PE DUO-LOCK 10.0000 .3937 9.6 .378 15.0000 .5906 22.5000 .8858 DL10 8.0000 .3150 4
                                                    List price:
                                                    $52.07 /each.
                                                    Your price::
                                                    6071130 4XN01200DL12 4XN01200DL12 WP15PE DUO-LOCK 12.0000 .4724 11.5 .4528 18.0000 .7087 27.0000 1.063 DL12 9.5000 .3740 4
                                                      List price:
                                                      $95.56 /each.
                                                      Your price::