Серия M100

Выбрать фильтры
Фильтры
    Просмотреть фильтры в
    Метрическая система
    Дюймовая система
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (62)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(60)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(62)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(62)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(62)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(62)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(59)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(59)
    • M Stainless Steel (59)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(59)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(59)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(59)
    • K Cast Iron (60)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(60)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(60)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(60)
    • N Non-Ferrous Materials (27)
      • N1
        Wrought Aluminum (27)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(27)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(26)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (1)
    • S High-Temp Alloys (57)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(49)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(49)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(49)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(57)
    • H Hardened Materials (12)
      • H1
        Hardened Materials 44-48 HRC(12)
    Select All Star
    • CN (10)
    • DE (29)
    • GB (1)
    • SG (9)
    • US (11)
    Applications
    Applications
    • Face MillingFace Milling (37)
    • PocketPocket (37)
    • Pocket HelicalPocket Helical (37)
    • Pocket MillingPocket Milling (37)
    • Profile MillingProfile Milling (37)
    • RampingRamping (37)
    • Shoulder Ball NoseShoulder Ball Nose (37)
    • Shoulder MillingShoulder Milling (37)
    • Slot MillingSlot Milling (37)
    • Slot Square EndSlot Square End (37)
    Cutting Diameter
    Cutting Diameter
    • 0.315 in(3)
    • 0.356 in(1)
    • 0.394 in(2)
    • 0.435 in(1)
    • 0.473 in(1)
    • 0.582 in(1)
    • 0.591 in(1)
    • 0.63 in(3)
    • 0.779 in(1)
    • 0.787 in(1)
    • 0.906 in(1)
    • 1.102 in(1)
    • 1.339 in(2)
    • 1.37 in(1)
    • 1.417 in(1)
    • 1.496 in(1)
    • 1.53 in(1)
    • 1.575 in(1)
    • 1.85 in(2)
    • 1.969 in(1)
    • 2.008 in(1)
    • 2.52 in(2)
    • 2.677 in(1)
    • 3.307 in(2)
    • 3.465 in(1)
    • 4.291 in(2)
    • 5.67 in(1)
    Cutting Diameter MinдоCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 8.0 mm(3)
    • 9.05 mm(1)
    • 10.0 mm(2)
    • 11.05 mm(1)
    • 12.0 mm(1)
    • 14.775 mm(1)
    • 15.0 mm(1)
    • 16.0 mm(3)
    • 19.776 mm(1)
    • 20.0 mm(1)
    • 23.0 mm(1)
    • 28.0 mm(1)
    • 34.0 mm(2)
    • 34.801 mm(1)
    • 36.0 mm(1)
    • 38.0 mm(1)
    • 38.85 mm(1)
    • 40.0 mm(1)
    • 47.0 mm(2)
    • 50.0 mm(1)
    • 51.0 mm(1)
    • 64.0 mm(2)
    • 68.0 mm(1)
    • 84.0 mm(2)
    • 88.0 mm(1)
    • 109.0 mm(2)
    • 144.0 mm(1)
    Cutting Diameter MinдоCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 16.0 mm(3)
    • 19.05 mm(2)
    • 20.0 mm(2)
    • 24.0 mm(1)
    • 25.0 mm(1)
    • 25.401 mm(1)
    • 26.0 mm(2)
    • 30.0 mm(1)
    • 31.75 mm(1)
    • 32.0 mm(1)
    • 35.0 mm(1)
    • 40.0 mm(1)
    • 50.0 mm(3)
    • 50.801 mm(2)
    • 52.0 mm(2)
    • 63.0 mm(3)
    • 66.0 mm(1)
    • 80.0 mm(3)
    • 100.0 mm(3)
    • 125.0 mm(2)
    • 160.0 mm(1)
    Maximum Cutting Diameter MinдоMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.63 in(3)
    • 0.75 in(2)
    • 0.787 in(2)
    • 0.946 in(1)
    • 0.984 in(1)
    • 1.0 in(1)
    • 1.024 in(2)
    • 1.181 in(1)
    • 1.25 in(1)
    • 1.26 in(1)
    • 1.379 in(1)
    • 1.575 in(1)
    • 1.969 in(3)
    • 2.0 in(2)
    • 2.047 in(2)
    • 2.48 in(3)
    • 2.598 in(1)
    • 3.15 in(3)
    • 3.938 in(3)
    • 4.921 in(2)
    • 6.299 in(1)
    Maximum Cutting Diameter MinдоMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 4.0 mm(4)
    • 5.0 mm(7)
    • 6.0 mm(11)
    • 8.0 mm(15)
    Cutting Length MinдоCutting Length Max
    Cutting Length
    Cutting Length
    • 0.157 in(4)
    • 0.197 in(7)
    • 0.237 in(11)
    • 0.315 in(15)
    Cutting Length MinдоCutting Length Max
    Reach
    Reach
    • 1.181 in(2)
    • 1.575 in(14)
    • 1.631 in(2)
    • 1.969 in(8)
    • 2.4 in(1)
    • 2.48 in(1)
    • 3.15 in(3)
    • 3.19 in(1)
    • 3.228 in(1)
    • 3.86 in(1)
    • 4.0 in(1)
    • 4.921 in(2)
    Reach MinдоReach Max
    Reach
    Reach
    • 30.0 mm(2)
    • 40.0 mm(14)
    • 41.401 mm(2)
    • 50.0 mm(8)
    • 60.95 mm(1)
    • 63.0 mm(1)
    • 80.0 mm(3)
    • 81.025 mm(1)
    • 82.0 mm(1)
    • 98.051 mm(1)
    • 101.601 mm(1)
    • 125.0 mm(2)
    Reach MinдоReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (37)
    Tool Cutting Edge Angle MinдоTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (7)
    • B-Cutter Retention Screw (12)
    • SHCS or RetScrw Or BoltCircle (1)
    • Screw-On Connection (5)
    • Weldon (12)
    Number of Flutes
    Number of Flutes
    • 2 (14)
    • 3 (2)
    • 4 (8)
    • 5 (5)
    • 6 (4)
    • 7 (2)
    • 8 (1)
    • 9 (1)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(9)
    • 1.631 in(2)
    • 1.969 in(8)
    • 2.047 in(2)
    • 2.48 in(4)
    • 3.543 in(1)
    • 3.622 in(1)
    • 4.53 in(1)
    • 5.197 in(1)
    • 5.433 in(1)
    • 5.53 in(1)
    • 5.591 in(2)
    • 6.15 in(1)
    • 6.28 in(1)
    • 7.205 in(1)
    • 7.362 in(1)
    Over All Length [L] MinдоOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(9)
    • 41.401 mm(2)
    • 50.0 mm(8)
    • 52.0 mm(2)
    • 63.0 mm(4)
    • 90.0 mm(1)
    • 92.0 mm(1)
    • 115.051 mm(1)
    • 132.0 mm(1)
    • 138.0 mm(1)
    • 140.451 mm(1)
    • 142.0 mm(2)
    • 156.201 mm(1)
    • 159.5 mm(1)
    • 183.0 mm(1)
    • 187.0 mm(1)
    Over All Length [L] MinдоOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.157 in(7)
    • 0.197 in(13)
    • 0.237 in(25)
    • 0.315 in(25)
    Corner Radius MinдоCorner Radius Max
    Corner Radius
    Corner Radius
    • 4.0 mm(7)
    • 5.0 mm(13)
    • 6.0 mm(25)
    • 8.0 mm(25)
    Corner Radius MinдоCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM (39)
    • TN2510 (36)
    • TN25M (17)
    • TN450 (36)
    • TN5015 (8)
    • TN5020 (8)
    • TN5515 (36)
    • TN6525 (39)
    • TN6540 (45)
    • TN7015 (8)
    • TN7035 (8)
    • TN7110 (8)
    • TN7115 (1)
    • TN7135 (9)
    • TN7525 (36)
    • TN7535 (36)
    • TTI25 (36)
    • TTM (23)
    • TTM08 (27)
    • TTM09 (4)
    • WK15CM (23)
    • WP35CM (44)
    • WS30PM (12)
    • WS40PM (13)
    Hand Of Tool
    Hand Of Tool
    • R (37)
    Wiper Insert
    Wiper Insert
    • N (33)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 1.25 (1)
    • 1.75 (1)
    • 2.25 (1)
    • 2.5 (1)
    • 2.75 (2)
    • 3.5 (1)
    • 3.75 (2)
    • 4.0 (1)
    • 4.5 (1)
    • 4.75 (1)
    • 5.75 (1)
    • 6.0 (1)
    • 6.5 (1)
    • 6.75 (1)
    • 7.0 (1)
    • 7.5 (3)
    • 7.75 (2)
    • 8.25 (1)
    • 8.75 (1)
    • 10.0 (2)
    • 10.25 (2)
    • 10.75 (1)
    • 12.0 (1)
    • 13.5 (1)
    • 14.25 (1)
    • 15.75 (1)
    • 22.0 (1)
    • 23.0 (1)
    • 40.0 (1)
    • 50.0 (1)
    Maximum Ramp Angle MinдоMaximum Ramp Angle Max
    frontEnd
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • R-ROUND (33)
    Insert IC Size
    Insert IC Size
    • 8.0 mm(3)
    • 10.0 mm(6)
    • 12.0 mm(14)
    • 16.0 mm(10)
    Insert IC Size MinдоInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.315 in(3)
    • 0.394 in(6)
    • 0.473 in(14)
    • 0.63 in(10)
    Insert IC Size MinдоInsert IC Size Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • 43 (2)
    • MMX (4)
    • X (11)
    Cutting Tool Material
    Cutting Tool Material
    • H W (33)
    Tolerance Class
    Tolerance Class
    • M (29)
    • P (4)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (12)
    • SCREW-ON (5)
    • SHELL MILL (20)
    Back-End Diameter
    Back-End Diameter
    • 16.0 mm(1)
    • 19.05 mm(3)
    • 20.0 mm(2)
    • 22.0 mm(7)
    • 25.0 mm(2)
    • 25.401 mm(2)
    • 27.0 mm(7)
    • 28.0 mm(3)
    • 31.75 mm(1)
    • 32.0 mm(6)
    • 40.0 mm(3)
    Back-End Diameter MinдоBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.63 in(1)
    • 0.75 in(3)
    • 0.787 in(2)
    • 0.866 in(7)
    • 0.984 in(2)
    • 1.0 in(2)
    • 1.063 in(7)
    • 1.102 in(3)
    • 1.25 in(1)
    • 1.26 in(6)
    • 1.575 in(3)
    Back-End Diameter MinдоBack-End Diameter Max
    No filters matching ""
    Вы собираетесь добавить на страницу «Мои решения». Хотите продолжить?
    Select the destination where you want to move до.
    Новинка Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Номер по каталогу ISO

    Номер по каталогу ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    Вы должны войти в систему, чтобы увидеть информацию на панели мониторинга
    Session expired due to inactivity, please login again
    Товары (), которые вы пытались добавить в корзину, недоступны, обратитесь в центр обслуживания клиентов.
    товар(-ы) успешно добавлен(-ы) в корзину

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberНомер по каталогу ISOСплав  

    You are about to leave the Solution building process.

    Are you sure you want to leave?