Высокопроизводительные цельные твердосплавные фрезы • Алюминий

Выбрать фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • N Non-Ferrous Materials (364)
    • N1
      Wrought Aluminum (364)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (364)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (364)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (364)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (314)
Select All Star
  • DE (18)
  • GB (5)
  • US (6)
Applications
Applications
  • Drilling Drilling (209)
  • Flat Bottom Drilling Flat Bottom Drilling (41)
  • Pocket Pocket (364)
  • Pocket Helical Pocket Helical (364)
  • Pocket Milling Pocket Milling (364)
  • Pocket Plunge Milling Pocket Plunge Milling (171)
  • Profile Milling Profile Milling (14)
  • Ramping Ramping (182)
  • Shoulder Ball Nose Shoulder Ball Nose (14)
  • Shoulder Milling Shoulder Milling (364)
  • Shoulder Roughing Shoulder Roughing (350)
  • Shoulder Square End Shoulder Square End (350)
  • Slot Ball Nose Slot Ball Nose (14)
  • Slot Milling Slot Milling (223)
  • Slot Side Slot Side (21)
  • Slot Square End Slot Square End (209)
  • Trochoidal Milling Trochoidal Milling (25)
Cutting Diameter
Cutting Diameter
  • 0.039 in (1)
  • 0.06 in (2)
  • 0.079 in (2)
  • 0.098 in (2)
  • 0.119 in (3)
  • 0.125 in (10)
  • 0.157 in (6)
  • 0.188 in (21)
  • 0.197 in (6)
  • 0.237 in (8)
  • 0.25 in (38)
  • 0.313 in (27)
  • 0.315 in (9)
  • 0.375 in (37)
  • 0.394 in (9)
  • 0.473 in (13)
  • 0.5 in (43)
  • 0.625 in (25)
  • 0.63 in (13)
  • 0.75 in (35)
  • 0.787 in (14)
  • 1.0 in (40)
Cutting Diameter Min до Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 1.0 mm (1)
  • 1.5 mm (2)
  • 2.0 mm (2)
  • 2.5 mm (2)
  • 3.0 mm (3)
  • 3.176 mm (10)
  • 4.0 mm (6)
  • 4.775 mm (21)
  • 5.0 mm (6)
  • 6.0 mm (8)
  • 6.351 mm (38)
  • 7.95 mm (27)
  • 8.0 mm (9)
  • 9.525 mm (37)
  • 10.0 mm (9)
  • 12.0 mm (13)
  • 12.701 mm (43)
  • 15.875 mm (25)
  • 16.0 mm (13)
  • 19.05 mm (35)
  • 20.0 mm (14)
  • 25.401 mm (40)
Cutting Diameter Min до Cutting Diameter Max
Cutting Length
Cutting Length
  • 4.0 mm (1)
  • 4.775 mm (4)
  • 6.0 mm (2)
  • 6.351 mm (14)
  • 7.95 mm (23)
  • 8.0 mm (4)
  • 9.0 mm (2)
  • 9.525 mm (25)
  • 10.0 mm (3)
  • 12.0 mm (7)
  • 12.701 mm (21)
  • 13.0 mm (4)
  • 14.0 mm (2)
  • 15.0 mm (1)
  • 15.875 mm (28)
  • 16.0 mm (2)
  • 18.0 mm (7)
  • 19.05 mm (26)
  • 20.0 mm (2)
  • 20.651 mm (1)
  • 22.0 mm (6)
  • 22.225 mm (1)
  • 24.0 mm (2)
  • 25.0 mm (9)
  • 25.401 mm (30)
  • 30.0 mm (3)
  • 31.75 mm (34)
  • 32.0 mm (10)
  • 36.0 mm (4)
  • 38.1 mm (11)
  • 40.0 mm (9)
  • 41.276 mm (9)
  • 44.45 mm (3)
  • 48.0 mm (3)
  • 50.801 mm (12)
  • 57.151 mm (4)
  • 60.0 mm (5)
  • 63.5 mm (15)
  • 76.2 mm (4)
  • 82.551 mm (7)
  • 101.601 mm (4)
Cutting Length Min до Cutting Length Max
Cutting Length
Cutting Length
  • 0.157 in (1)
  • 0.188 in (4)
  • 0.237 in (2)
  • 0.25 in (14)
  • 0.313 in (23)
  • 0.315 in (4)
  • 0.354 in (2)
  • 0.375 in (25)
  • 0.394 in (3)
  • 0.473 in (7)
  • 0.5 in (21)
  • 0.512 in (4)
  • 0.551 in (2)
  • 0.591 in (1)
  • 0.625 in (28)
  • 0.63 in (2)
  • 0.709 in (7)
  • 0.75 in (26)
  • 0.787 in (2)
  • 0.814 in (1)
  • 0.866 in (6)
  • 0.875 in (1)
  • 0.946 in (2)
  • 0.984 in (9)
  • 1.0 in (30)
  • 1.181 in (3)
  • 1.25 in (34)
  • 1.26 in (10)
  • 1.417 in (4)
  • 1.5 in (11)
  • 1.575 in (9)
  • 1.625 in (9)
  • 1.75 in (3)
  • 1.891 in (3)
  • 2.0 in (12)
  • 2.25 in (4)
  • 2.362 in (5)
  • 2.5 in (15)
  • 3.0 in (4)
  • 3.25 in (7)
  • 4.0 in (4)
Cutting Length Min до Cutting Length Max
Reach
Reach
  • 0.25 in (1)
  • 0.313 in (1)
  • 0.375 in (3)
  • 0.473 in (2)
  • 0.5 in (1)
  • 0.564 in (4)
  • 0.591 in (3)
  • 0.625 in (4)
  • 0.63 in (1)
  • 0.709 in (4)
  • 0.75 in (10)
  • 0.787 in (1)
  • 0.814 in (1)
  • 0.875 in (1)
  • 0.946 in (7)
  • 1.0 in (17)
  • 1.181 in (5)
  • 1.25 in (20)
  • 1.26 in (2)
  • 1.417 in (7)
  • 1.5 in (19)
  • 1.575 in (3)
  • 1.891 in (12)
  • 2.0 in (19)
  • 2.25 in (6)
  • 2.362 in (7)
  • 2.5 in (18)
  • 2.52 in (3)
  • 3.0 in (12)
  • 3.15 in (5)
  • 3.25 in (6)
  • 3.5 in (6)
  • 3.75 in (6)
Reach Min до Reach Max
Reach
Reach
  • 6.351 mm (1)
  • 7.95 mm (1)
  • 9.525 mm (3)
  • 12.0 mm (2)
  • 12.701 mm (1)
  • 14.3 mm (4)
  • 15.0 mm (3)
  • 15.875 mm (4)
  • 16.0 mm (1)
  • 18.0 mm (4)
  • 19.05 mm (10)
  • 20.0 mm (1)
  • 20.651 mm (1)
  • 22.225 mm (1)
  • 24.0 mm (7)
  • 25.401 mm (17)
  • 30.0 mm (5)
  • 31.75 mm (20)
  • 32.0 mm (2)
  • 36.0 mm (7)
  • 38.1 mm (19)
  • 40.0 mm (3)
  • 48.0 mm (12)
  • 50.801 mm (19)
  • 57.151 mm (6)
  • 60.0 mm (7)
  • 63.5 mm (18)
  • 64.0 mm (3)
  • 76.2 mm (12)
  • 80.0 mm (5)
  • 82.551 mm (6)
  • 88.9 mm (6)
  • 95.25 mm (6)
Reach Min до Reach Max
Number of Flutes
Number of Flutes
  • 2 (149)
  • 3 (215)
Over All Length [L]
Over All Length [L]
  • 1.496 in (10)
  • 1.5 in (2)
  • 1.969 in (8)
  • 2.0 in (25)
  • 2.25 in (11)
  • 2.48 in (12)
  • 2.5 in (33)
  • 2.992 in (24)
  • 3.0 in (43)
  • 3.25 in (5)
  • 3.5 in (25)
  • 3.504 in (13)
  • 3.938 in (4)
  • 4.0 in (36)
  • 4.094 in (2)
  • 4.25 in (4)
  • 4.331 in (3)
  • 4.5 in (10)
  • 4.529 in (7)
  • 5.0 in (32)
  • 5.5 in (33)
  • 5.906 in (5)
  • 6.5 in (13)
  • 7.0 in (4)
Over All Length [L] Min до Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 38.0 mm (10)
  • 38.1 mm (2)
  • 50.0 mm (8)
  • 50.801 mm (25)
  • 57.151 mm (11)
  • 63.0 mm (12)
  • 63.5 mm (33)
  • 76.0 mm (24)
  • 76.2 mm (43)
  • 82.551 mm (5)
  • 88.9 mm (25)
  • 89.0 mm (13)
  • 100.0 mm (4)
  • 101.601 mm (36)
  • 104.0 mm (2)
  • 107.95 mm (4)
  • 110.0 mm (3)
  • 114.301 mm (10)
  • 115.0 mm (7)
  • 127.0 mm (32)
  • 139.701 mm (33)
  • 150.0 mm (5)
  • 165.101 mm (13)
  • 177.8 mm (4)
Over All Length [L] Min до Over All Length [L] Max
cornerConfiguration
Corner Style
Corner Style
  • BALL NOSE (14)
  • RADIUS (245)
  • SQUARE END (105)
Corner Radius
Corner Radius
  • 0.0 in (105)
  • 0.008 in (17)
  • 0.015 in (30)
  • 0.02 in (15)
  • 0.03 in (66)
  • 0.039 in (11)
  • 0.06 in (70)
  • 0.063 in (2)
  • 0.079 in (4)
  • 0.09 in (2)
  • 0.094 in (2)
  • 0.098 in (1)
  • 0.119 in (6)
  • 0.12 in (14)
  • 0.125 in (3)
  • 0.156 in (1)
  • 0.157 in (3)
  • 0.188 in (2)
  • 0.19 in (3)
  • 0.197 in (1)
  • 0.25 in (6)
Corner Radius Min до Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (105)
  • 0.2 mm (17)
  • 0.375 mm (30)
  • 0.5 mm (15)
  • 0.75 mm (66)
  • 1.0 mm (11)
  • 1.5 mm (9)
  • 1.526 mm (61)
  • 1.6 mm (2)
  • 2.0 mm (4)
  • 2.275 mm (2)
  • 2.375 mm (2)
  • 2.5 mm (1)
  • 3.0 mm (6)
  • 3.051 mm (14)
  • 3.176 mm (3)
  • 3.975 mm (1)
  • 4.0 mm (3)
  • 4.775 mm (2)
  • 4.825 mm (3)
  • 5.0 mm (1)
  • 6.351 mm (6)
Corner Radius Min до Corner Radius Max
application
Maximum Ramp Angle
Maximum Ramp Angle
  • 45.0 (350)
Maximum Ramp Angle Min до Maximum Ramp Angle Max
frontEnd
Neck Diameter
Neck Diameter
  • 0.117 in (4)
  • 0.148 in (3)
  • 0.176 in (11)
  • 0.185 in (4)
  • 0.222 in (6)
  • 0.236 in (18)
  • 0.293 in (18)
  • 0.296 in (7)
  • 0.352 in (18)
  • 0.37 in (8)
  • 0.444 in (11)
  • 0.472 in (18)
  • 0.588 in (18)
  • 0.593 in (11)
  • 0.705 in (18)
  • 0.74 in (12)
  • 0.941 in (18)
Neck Diameter Min до Neck Diameter Max
Neck Diameter
Neck Diameter
  • 2.975 mm (4)
  • 3.75 mm (3)
  • 4.476 mm (11)
  • 4.7 mm (4)
  • 5.65 mm (6)
  • 5.976 mm (18)
  • 7.45 mm (18)
  • 7.525 mm (7)
  • 8.951 mm (18)
  • 9.4 mm (8)
  • 11.275 mm (11)
  • 11.951 mm (18)
  • 14.925 mm (18)
  • 15.05 mm (11)
  • 17.901 mm (18)
  • 18.8 mm (12)
  • 23.875 mm (18)
Neck Diameter Min до Neck Diameter Max
backEnd
Back-End Diameter
Back-End Diameter
  • 3.0 mm (10)
  • 3.176 mm (10)
  • 4.0 mm (6)
  • 4.775 mm (21)
  • 5.0 mm (6)
  • 6.0 mm (8)
  • 6.351 mm (38)
  • 7.95 mm (27)
  • 8.0 mm (9)
  • 9.525 mm (37)
  • 10.0 mm (9)
  • 12.0 mm (13)
  • 12.701 mm (43)
  • 15.875 mm (25)
  • 16.0 mm (13)
  • 19.05 mm (35)
  • 20.0 mm (14)
  • 25.401 mm (40)
Back-End Diameter Min до Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.119 in (10)
  • 0.125 in (10)
  • 0.157 in (6)
  • 0.188 in (21)
  • 0.197 in (6)
  • 0.237 in (8)
  • 0.25 in (38)
  • 0.313 in (27)
  • 0.315 in (9)
  • 0.375 in (37)
  • 0.394 in (9)
  • 0.473 in (13)
  • 0.5 in (43)
  • 0.625 in (25)
  • 0.63 in (13)
  • 0.75 in (35)
  • 0.787 in (14)
  • 1.0 in (40)
Back-End Diameter Min до Back-End Diameter Max
No filters matching ""