successfully added to cart
View Cart

Notifications

Mark all as read

Режущие головки KM50TS™

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (126)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (124)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (124)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (124)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (124)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (124)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (126)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (126)
  • M Stainless Steel (126)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (126)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (126)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (126)
  • K Cast Iron (138)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (138)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (138)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (138)
  • N Non-Ferrous Materials (124)
    • N1
      Wrought Aluminum
      (122)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (120)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (59)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (122)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (120)
    • N6
      Carbon, Graphite Composites, CFRP
      (105)
    • N7
      MMC's
      (120)
  • S High-Temp Alloys (138)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (136)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (138)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (136)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (124)
  • H Hardened Materials (119)
    • H1
      Hardened Materials 44-48 HRC
      (119)
    • H2
      Hardened Materials 48-55 HRC
      (110)
    • H3
      Hardened Materials 56-60 HRC
      (110)
    • H4
      Hardened Materials >60 HRC
      (94)
Applications
Applications
  • Chamfer Turning Chamfer Turning (6)
  • Cut-Off Cut-Off (4)
  • Deep Grooving Deep Grooving (4)
  • Face Grooving Face Grooving (4)
  • Facing Facing (87)
  • Grooving Grooving (8)
  • ID Grooving ID Grooving (4)
  • ID Thread Turning ID Thread Turning (10)
  • Multiple Direction Cutting Multiple Direction Cutting (72)
  • OD Thread Turning OD Thread Turning (19)
  • Plunge Turning Plunge Turning (6)
  • Profiling Profiling (72)
  • TRN Boring TRN Boring (84)
  • Threading Threading (23)
  • Turning Turning (115)
Type of Thread
Type of Thread
  • 55 (9)
  • 60 (19)
  • ACME (19)
  • API (15)
  • API BUTTRESS (3)
  • API RD (12)
  • BSPT (6)
  • BSW (15)
  • BUTTRESS (10)
  • M (15)
  • NPT (12)
  • NPTF (6)
  • RD DIN 405 (9)
  • STUB ACME (15)
  • TR DIN 103 (9)
  • UN (16)
  • UNJ (12)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (127)
  • Interrupted (84)
  • Lightly Interrupted Cut (127)
  • Smooth Cut (127)
  • Varying Depth of Cut (127)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (15)
  • 48.0 (2)
  • 49.783 (1)
  • 62.5 (2)
  • 63.0 (2)
  • 75.0 (32)
  • 85.0 (4)
  • 90.0 (31)
  • 93.0 (25)
  • 95.0 (18)
  • 107.5 (10)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (62)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (65)
  • 2.0 (73)
  • 3.0 (20)
  • 4.0 (92)
  • 6.0 (9)
  • 8.0 (67)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (1)
  • 0.002 in (14)
  • 0.003 in (16)
  • 0.004 in (62)
  • 0.005 in (8)
  • 0.006 in (14)
  • 0.007 in (12)
  • 0.008 in (58)
  • 0.01 in (12)
  • 0.011 in (10)
  • 0.012 in (10)
  • 0.014 in (27)
  • 0.015 in (2)
  • 0.016 in (90)
  • 0.017 in (9)
  • 0.019 in (10)
  • 0.02 in (8)
  • 0.021 in (1)
  • 0.023 in (10)
  • 0.024 in (4)
  • 0.027 in (2)
  • 0.028 in (1)
  • 0.03 in (2)
  • 0.031 in (117)
  • 0.035 in (10)
  • 0.037 in (2)
  • 0.038 in (2)
  • 0.039 in (7)
  • 0.047 in (117)
  • 0.049 in (6)
  • 0.055 in (1)
  • 0.06 in (7)
  • 0.062 in (17)
  • 0.063 in (106)
  • 0.069 in (6)
  • 0.078 in (6)
  • 0.079 in (10)
  • 0.089 in (10)
  • 0.094 in (16)
  • 0.095 in (56)
  • 0.098 in (4)
  • 0.125 in (5)
  • 0.126 in (11)
  • 0.157 in (2)
  • 0.197 in (2)
  • 0.237 in (2)
  • 0.25 in (4)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (1)
  • 0.05 mm (14)
  • 0.076 mm (16)
  • 0.1 mm (62)
  • 0.125 mm (8)
  • 0.151 mm (14)
  • 0.176 mm (12)
  • 0.2 mm (58)
  • 0.225 mm (8)
  • 0.25 mm (12)
  • 0.275 mm (10)
  • 0.301 mm (10)
  • 0.325 mm (12)
  • 0.351 mm (25)
  • 0.375 mm (2)
  • 0.4 mm (90)
  • 0.426 mm (9)
  • 0.45 mm (10)
  • 0.476 mm (3)
  • 0.5 mm (8)
  • 0.525 mm (1)
  • 0.576 mm (10)
  • 0.601 mm (4)
  • 0.65 mm (2)
  • 0.701 mm (1)
  • 0.75 mm (2)
  • 0.775 mm (6)
  • 0.8 mm (111)
  • 0.9 mm (10)
  • 0.925 mm (2)
  • 0.976 mm (2)
  • 1.0 mm (7)
  • 1.201 mm (117)
  • 1.25 mm (6)
  • 1.401 mm (1)
  • 1.5 mm (6)
  • 1.526 mm (1)
  • 1.576 mm (17)
  • 1.6 mm (106)
  • 1.75 mm (6)
  • 1.975 mm (6)
  • 2.0 mm (10)
  • 2.25 mm (10)
  • 2.375 mm (16)
  • 2.401 mm (56)
  • 2.5 mm (4)
  • 3.176 mm (5)
  • 3.2 mm (11)
  • 4.0 mm (2)
  • 5.0 mm (2)
  • 6.0 mm (2)
  • 6.351 mm (4)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CW5025 (102)
  • K090 (91)
  • K10M (84)
  • K20K (95)
  • K25M (82)
  • K25P (85)
  • K313 (113)
  • K420 (82)
  • K68 (108)
  • KC5010 (119)
  • KC5025 (122)
  • KC5410 (96)
  • KC5510 (95)
  • KC720 (85)
  • KC730 (94)
  • KC7310 (95)
  • KC8050 (103)
  • KC810 (113)
  • KC850 (113)
  • KC9010 (95)
  • KC9025 (103)
  • KC910 (105)
  • KC9105 (99)
  • KC9110 (113)
  • KC9120 (105)
  • KC9125 (103)
  • KC9140 (97)
  • KC9145 (89)
  • KC9215 (95)
  • KC9225 (99)
  • KC9240 (101)
  • KC9240NEW (101)
  • KC9245 (95)
  • KC9315 (103)
  • KC9320 (113)
  • KC9325 (99)
  • KC935 (111)
  • KC950 (105)
  • KC990 (97)
  • KCK05 (101)
  • KCK05B (86)
  • KCK15 (103)
  • KCK15B (103)
  • KCK20 (113)
  • KCK20B (113)
  • KCM15 (99)
  • KCM15B (97)
  • KCM25 (101)
  • KCM25B (101)
  • KCM35 (95)
  • KCP05 (84)
  • KCP10 (103)
  • KCP10B (113)
  • KCP25 (103)
  • KCP25B (113)
  • KCP30 (103)
  • KCP30B (88)
  • KCP40 (84)
  • KCP40B (88)
  • KCPK05 (93)
  • KCS10B (96)
  • KCU10 (113)
  • KCU25 (111)
  • KT315 (86)
  • KU10T (86)
  • KU30T (111)
  • KY1320 (103)
  • KY1615 (92)
  • KY3000 (99)
  • KY3400 (83)
  • KY3500 (105)
  • KYHK15B (94)
  • KYK35 (105)
  • NL250 (97)
  • NL920 (86)
  • TN10P (94)
  • TN15M (84)
  • TN20K (97)
  • TN20P (101)
  • TN30M (88)
  • TN30P (84)
  • TN5015 (92)
  • TN5120 (83)
  • TN7010 (94)
  • TN7015 (94)
  • TN7025 (94)
  • TN7110 (91)
  • TN7115 (83)
  • TN7125 (86)
  • WK05CT (99)
  • WK20CT (103)
  • WM15CT (99)
  • WM25CT (99)
  • WM35CT (95)
  • WP15CT (103)
  • WP25CT (103)
  • WP35CT (103)
  • WS10PT (86)
  • WS25PT (95)
  • WU10HT (102)
Hand Of Tool
Hand Of Tool
  • L (28)
  • N (5)
  • R (29)
Wiper Insert
Wiper Insert
  • N (138)
  • Y (78)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (4)
  • 41.301 mm (2)
  • 47.6 mm (2)
  • 57.2 mm (2)
  • 63.0 mm (16)
  • 70.0 mm (41)
  • 80.0 mm (8)
  • 86.0 mm (2)
  • 88.9 mm (2)
  • 90.0 mm (4)
  • 100.0 mm (11)
  • 104.0 mm (2)
  • 139.701 mm (2)
  • 174.601 mm (2)
  • 209.601 mm (2)
  • 222.3 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (4)
  • 1.627 in (2)
  • 1.874 in (2)
  • 2.253 in (2)
  • 2.48 in (16)
  • 2.757 in (41)
  • 3.15 in (8)
  • 3.386 in (2)
  • 3.5 in (2)
  • 3.543 in (4)
  • 3.938 in (11)
  • 4.094 in (2)
  • 5.5 in (2)
  • 6.875 in (2)
  • 8.252 in (2)
  • 8.752 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (10)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (10)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (9)
  • S (53)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (46)
  • DOUBLE POSITIVE (1)
  • NEGATIVE-ZERO (6)
  • NEUTRAL (ZERO) (8)
  • POSITIVE-NEGATIVE (1)
Maximum Bore Depth
Maximum Bore Depth
  • 1.969 in (84)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 50.0 mm (84)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (4)
frontEnd
Adapter Front-End
Adapter Front-End
  • CARTRIDGE MOUNT (4)
  • CUTOFF SUPPORT BLADE (2)
Clamp Style
Clamp Style
  • C (2)
  • M (67)
  • N (22)
  • P (32)
  • S (19)
Cutting Width
Cutting Width
  • 0.039 in (6)
  • 0.047 in (6)
  • 0.06 in (6)
  • 0.062 in (6)
  • 0.069 in (6)
  • 0.073 in (6)
  • 0.078 in (6)
  • 0.079 in (6)
  • 0.088 in (6)
  • 0.089 in (6)
  • 0.095 in (6)
  • 0.097 in (6)
  • 0.098 in (6)
  • 0.105 in (6)
  • 0.108 in (6)
  • 0.11 in (6)
  • 0.119 in (10)
  • 0.122 in (6)
  • 0.125 in (10)
  • 0.126 in (10)
  • 0.128 in (6)
  • 0.131 in (3)
  • 0.138 in (10)
  • 0.143 in (6)
  • 0.156 in (6)
  • 0.157 in (10)
  • 0.167 in (10)
  • 0.169 in (6)
  • 0.177 in (10)
  • 0.178 in (6)
  • 0.181 in (3)
  • 0.185 in (8)
  • 0.188 in (10)
  • 0.189 in (10)
  • 0.192 in (3)
  • 0.193 in (3)
  • 0.195 in (6)
  • 0.197 in (4)
  • 0.202 in (4)
  • 0.213 in (4)
  • 0.217 in (4)
  • 0.219 in (4)
  • 0.237 in (4)
  • 0.25 in (4)
  • 0.255 in (4)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.0 mm (6)
  • 1.201 mm (6)
  • 1.5 mm (6)
  • 1.576 mm (6)
  • 1.75 mm (6)
  • 1.826 mm (6)
  • 1.975 mm (6)
  • 2.0 mm (6)
  • 2.2 mm (6)
  • 2.225 mm (6)
  • 2.25 mm (6)
  • 2.401 mm (6)
  • 2.475 mm (6)
  • 2.5 mm (6)
  • 2.676 mm (6)
  • 2.75 mm (6)
  • 2.801 mm (6)
  • 3.0 mm (10)
  • 3.1 mm (6)
  • 3.176 mm (10)
  • 3.2 mm (10)
  • 3.25 mm (6)
  • 3.325 mm (3)
  • 3.5 mm (10)
  • 3.6 mm (6)
  • 3.95 mm (6)
  • 3.975 mm (3)
  • 4.0 mm (10)
  • 4.25 mm (10)
  • 4.3 mm (6)
  • 4.5 mm (10)
  • 4.525 mm (6)
  • 4.601 mm (3)
  • 4.7 mm (8)
  • 4.775 mm (10)
  • 4.801 mm (10)
  • 4.875 mm (3)
  • 4.9 mm (3)
  • 4.95 mm (6)
  • 5.0 mm (4)
  • 5.125 mm (4)
  • 5.4 mm (4)
  • 5.5 mm (4)
  • 5.575 mm (4)
  • 6.0 mm (4)
  • 6.351 mm (4)
  • 6.476 mm (4)
Cutting Width Min to Cutting Width Max
Front End Type
Front End Type
  • KMC - Cartridge Mount Kenna (4)
  • PMK - Prismatic Adapter Kenna (2)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (25)
  • D-DIAMOND/RHOMBIC 55 (29)
  • LT-TRIANGLE LAY DOWN THREAD 60 (15)
  • R-ROUND (6)
  • S-SQUARE 90 (39)
  • T-TRIANGLE 60 (5)
  • TN-TOP NOTCH (10)
  • V-DIAMOND/RHOMBIC 35 (9)
  • W-TRIGON 80 (4)
Front End Style
Front End Style
  • KMC-29WID/MAN SerratedBlade Mt (4)
  • PMK02 Cutoff Sup Bld A1-A3 (2)
Insert Size
Insert Size
  • 3 (6)
  • 4 (4)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.21 in (2)
  • 0.294 in (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 5.325 mm (2)
  • 7.476 mm (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 0.966 in (2)
  • 2.118 in (2)
  • 2.177 in (2)
Gage Length
Gage Length
  • 24.526 mm (2)
  • 53.801 mm (2)
  • 55.301 mm (2)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (88)
  • B L (78)
  • C A (109)
  • C N (115)
  • D P (61)
  • H T (88)
  • H W (126)
backEnd
Connection Type
Connection Type
  • TAPER SHANK (62)
System Size
System Size
  • KM50TS (68)
Back-End Diameter
Back-End Diameter
  • 50.0 mm (142)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 1.969 in (142)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Режущие узлы KM40

M-Clamping
(4 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
3738149 KM50TSMDJNL1504 KM50TSMDJNL1504 50.0000 1.968 35.0000 1.378 DN..150408/DN..432 0.51 1.11
    List price:
    $332.01 /each.
    Your price::
    Qty
    3738150 KM50TSMDJNL1506 KM50TSMDJNL1506 50.0000 1.968 35.0000 1.378 DN..150608/DN..442 0.50 1.11
      List price:
      $332.01 /each.
      Your price::
      Qty
      3738151 KM50TSMDJNR1504 KM50TSMDJNR1504 50.0000 1.968 35.0000 1.378 DN..150408/DN..432 0.50 1.11
        List price:
        $332.01 /each.
        Your price::
        Qty
        3738152 KM50TSMDJNR1506 KM50TSMDJNR1506 50.0000 1.968 35.0000 1.378 DN..150608/DN..442 0.50 1.11
          List price:
          $332.01 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is no longer available
          Replacement Product Please contact customer service for assistance
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          Режущие узлы KM40

          M-Clamping
          (4 Products)
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
          3738179 KM50TSMCRNL12 KM50TSMCRNL12 50.0000 1.969 30.0000 1.181 CN..120408/CN..432 0.66 1.45
            List price:
            $332.01 /each.
            Your price::
            Qty
            3738181 KM50TSMCRNL16 KM50TSMCRNL16 50.0000 1.968 30.0000 1.181 CN..160612/CN..543 0.64 1.41
              List price:
              $332.01 /each.
              Your price::
              Qty
              3738182 KM50TSMCRNR12 KM50TSMCRNR12 50.0000 1.969 30.0000 1.181 CN..120408/CN..432 0.66 1.45
                List price:
                $332.01 /each.
                Your price::
                Qty
                3838383 KM50TSMCRNR16 KM50TSMCRNR16 50.0000 1.968 30.0000 1.181 CN..160612/CN..543 0.66 1.45
                  List price:
                  $332.01 /each.
                  Your price::
                  Qty
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is no longer available
                  Replacement Product Please contact customer service for assistance
                  Qty

                  Sold in pkg. of

                  ORIGINAL PRODUCT

                  Режущие узлы KM40

                  M-Clamping
                  (6 Products)
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                  3738141 KM50TSMCLNL12 KM50TSMCLNL12 50.0000 1.969 35.0000 1.378 70.0000 2.756 CN..120408/CN..432 0.61 1.35
                    List price:
                    $332.02 /each.
                    Your price::
                    Qty
                    3738142 KM50TSMCLNL16 KM50TSMCLNL16 50.0000 1.969 35.0000 1.378 90.0000 3.543 CN..160612/CN..543 0.64 1.41
                      List price:
                      $332.02 /each.
                      Your price::
                      Qty
                      3738163 KM50TSMCLNL19 KM50TSMCLNL19 50.0000 1.969 35.0000 1.378 90.0000 3.543 CN..190612/CN..643 0.63 1.39
                        List price:
                        $332.02 /each.
                        Your price::
                        Qty
                        3738164 KM50TSMCLNR12 KM50TSMCLNR12 50.0000 1.969 35.0000 1.378 70.0000 2.756 CN..120408/CN..432 0.61 1.35
                          List price:
                          $332.02 /each.
                          Your price::
                          Qty
                          3738165 KM50TSMCLNR16 KM50TSMCLNR16 50.0000 1.969 35.0000 1.378 90.0000 3.543 CN..160612/CN..543 0.64 1.41
                            List price:
                            $332.02 /each.
                            Your price::
                            Qty
                            3738166 KM50TSMCLNR19 KM50TSMCLNR19 50.0000 1.969 35.0000 1.378 90.0000 3.543 CN..190612/CN..643 0.63 1.39
                              List price:
                              $332.02 /each.
                              Your price::
                              Qty
                              List price:
                              Discount: %
                              Your price::
                              Replacement This item is no longer available
                              Replacement Product Please contact customer service for assistance
                              Qty

                              Sold in pkg. of

                              ORIGINAL PRODUCT

                              Режущие узлы KM40

                              M-Clamping
                              (4 Products)
                              View Products
                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
                              3738137 KM50TSMCKNL12 KM50TSMCKNL12 50.0000 1.969 35.0000 1.378 70.0000 2.756 CN..120408/CN..432 0.68 1.51