Welcome
Please confirm your preferences
Update Preferences

Предложения по продукции

Product Family suggestions

WIDIA At Your Service

Have a Product Specific Question?

See a full list of Global Service Professionals by expertise area

Quick Order
Позиции успешно добавлено в корзину
View Cart
Back to Solution

Editing Solution

Adding Solution

Solution Name: {{SolutionName}}

Системы резьбонарезания и обработки канавок TopThread™ и TopGroove™

Выбрать фильтры
Filters
Фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (13)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (13)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (13)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (13)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (13)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (13)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (13)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (13)
  • M Stainless Steel (13)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (13)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (13)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (13)
  • K Cast Iron (13)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (13)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (13)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (13)
  • N Non-Ferrous Materials (13)
    • N1
      Wrought Aluminum
      (13)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (13)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (13)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (13)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (13)
    • N6
      Carbon, Graphite Composites, CFRP
      (13)
    • N7
      MMC's
      (13)
  • S High-Temp Alloys (13)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (13)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (13)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (13)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (13)
  • H Hardened Materials (13)
    • H1
      Hardened Materials 44-48 HRC
      (13)
    • H2
      Hardened Materials 48-55 HRC
      (13)
    • H3
      Hardened Materials 56-60 HRC
      (11)
    • H4
      Hardened Materials >60 HRC
      (11)
Applications
Applications
  • Grooving Grooving (9)
  • ID Facing ID Facing (9)
  • ID Grooving ID Grooving (9)
  • ID Thread Turning ID Thread Turning (9)
  • Multiple Direction Cutting Multiple Direction Cutting (9)
  • TRN Boring TRN Boring (9)
  • Turning Turning (9)
Type of Thread
Type of Thread
  • 60 (13)
  • ACME (11)
  • API (11)
  • API RD (8)
  • BSW (8)
  • BUTTRESS (13)
  • M (9)
  • NPT (8)
  • STUB ACME (8)
  • UN (13)
  • UNJ (8)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (13)
  • Lightly Interrupted Cut (13)
  • Smooth Cut (13)
  • Varying Depth of Cut (13)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (13)
  • 2.0 (13)
Cutting Edges Per Insert Min до Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (8)
  • 0.003 in (13)
  • 0.004 in (10)
  • 0.005 in (8)
  • 0.006 in (11)
  • 0.007 in (12)
  • 0.008 in (13)
  • 0.01 in (12)
  • 0.011 in (8)
  • 0.012 in (8)
  • 0.014 in (11)
  • 0.016 in (8)
  • 0.017 in (8)
  • 0.019 in (11)
  • 0.02 in (10)
  • 0.023 in (11)
  • 0.03 in (2)
  • 0.031 in (10)
  • 0.035 in (11)
  • 0.039 in (10)
  • 0.047 in (10)
  • 0.049 in (10)
  • 0.06 in (10)
  • 0.062 in (8)
  • 0.063 in (13)
  • 0.069 in (10)
  • 0.078 in (8)
  • 0.079 in (11)
  • 0.089 in (11)
  • 0.095 in (11)
  • 0.098 in (3)
  • 0.125 in (3)
Corner Radius Min до Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (8)
  • 0.076 mm (13)
  • 0.1 mm (10)
  • 0.125 mm (8)
  • 0.151 mm (11)
  • 0.176 mm (12)
  • 0.2 mm (13)
  • 0.225 mm (8)
  • 0.25 mm (12)
  • 0.275 mm (8)
  • 0.301 mm (8)
  • 0.325 mm (11)
  • 0.351 mm (11)
  • 0.4 mm (8)
  • 0.426 mm (8)
  • 0.45 mm (11)
  • 0.476 mm (4)
  • 0.5 mm (10)
  • 0.576 mm (11)
  • 0.75 mm (2)
  • 0.775 mm (10)
  • 0.9 mm (11)
  • 1.0 mm (10)
  • 1.201 mm (10)
  • 1.25 mm (10)
  • 1.5 mm (10)
  • 1.576 mm (8)
  • 1.6 mm (13)
  • 1.75 mm (10)
  • 1.975 mm (8)
  • 2.0 mm (11)
  • 2.25 mm (11)
  • 2.401 mm (11)
  • 2.5 mm (3)
  • 3.176 mm (3)
Corner Radius Min до Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K2885 (10)
  • K313 (13)
  • K420 (13)
  • K4H (9)
  • K68 (13)
  • KB1345 (11)
  • KB1630 (11)
  • KB5625 (8)
  • KBH20 (4)
  • KC250 (10)
  • KC5010 (13)
  • KC5025 (13)
  • KC5410 (13)
  • KC710 (13)
  • KC720 (13)
  • KC722 (13)
  • KC730 (13)
  • KC732 (8)
  • KC810 (13)
  • KC850 (13)
  • KC910 (9)
  • KC9110 (13)
  • KC9120 (8)
  • KC9320 (13)
  • KC935 (13)
  • KC950 (13)
  • KCK20 (12)
  • KCK20B (13)
  • KCP10B (13)
  • KCP25B (13)
  • KCU10 (13)
  • KCU25 (13)
  • KD050 (4)
  • KD081 (8)
  • KD100 (10)
  • KD120 (11)
  • KD1425 (8)
  • KT175 (10)
  • KT315 (13)
  • KU10T (13)
  • KU25T (13)
  • KU30T (13)
  • KY3000 (11)
  • THM (10)
  • TN10P (11)
  • TN6010 (13)
  • TN6025 (13)
  • TN7110 (13)
  • WU10HT (4)
  • WU10PT (4)
  • WU25PT (4)
Hand Of Tool
Hand Of Tool
  • L (6)
  • R (7)
F Dimension
F Dimension
  • 13.0 mm (2)
  • 17.0 mm (2)
  • 22.0 mm (4)
  • 27.0 mm (5)
F Dimension Min до F Dimension Max
F Dimension
F Dimension
  • 0.512 in (2)
  • 0.669 in (2)
  • 0.866 in (4)
  • 1.063 in (5)
F Dimension Min до F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 24.0 mm (1)
  • 24.5 mm (1)
  • 34.0 mm (2)
  • 38.5 mm (2)
  • 40.0 mm (2)
  • 48.0 mm (3)
  • 48.5 mm (2)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.946 in (1)
  • 0.965 in (1)
  • 1.339 in (2)
  • 1.516 in (2)
  • 1.575 in (2)
  • 1.891 in (3)
  • 1.909 in (2)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Rake Angle Style
Rake Angle Style
  • NEUTRAL (ZERO) (4)
Maximum Bore Depth
Maximum Bore Depth
  • 2.441 in (2)
  • 2.512 in (2)
  • 3.15 in (1)
  • 3.281 in (2)
  • 3.91 in (2)
  • 4.158 in (2)
  • 4.37 in (1)
  • 4.371 in (1)
Maximum Bore Depth Min до Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 62.0 mm (2)
  • 63.801 mm (2)
  • 80.0 mm (1)
  • 83.301 mm (2)
  • 99.325 mm (2)
  • 105.601 mm (2)
  • 111.0 mm (1)
  • 111.025 mm (1)
Maximum Bore Depth Min до Maximum Bore Depth Max
frontEnd
Cutting Width
Cutting Width
  • 0.02 in (2)
  • 0.031 in (2)
  • 0.035 in (2)
  • 0.039 in (10)
  • 0.041 in (2)
  • 0.047 in (10)
  • 0.055 in (2)
  • 0.058 in (2)
  • 0.06 in (10)
  • 0.061 in (1)
  • 0.062 in (10)
  • 0.067 in (2)
  • 0.069 in (10)
  • 0.073 in (8)
  • 0.077 in (2)
  • 0.078 in (8)
  • 0.079 in (10)
  • 0.088 in (10)
  • 0.089 in (6)
  • 0.094 in (4)
  • 0.095 in (10)
  • 0.097 in (8)
  • 0.098 in (10)
  • 0.105 in (8)
  • 0.108 in (10)
  • 0.11 in (8)
  • 0.119 in (13)
  • 0.122 in (8)
  • 0.125 in (13)
  • 0.126 in (13)
  • 0.128 in (10)
  • 0.129 in (2)
  • 0.131 in (4)
  • 0.138 in (13)
  • 0.143 in (8)
  • 0.147 in (1)
  • 0.15 in (2)
  • 0.152 in (2)
  • 0.156 in (8)
  • 0.157 in (11)
  • 0.167 in (11)
  • 0.169 in (8)
  • 0.177 in (11)
  • 0.178 in (8)
  • 0.185 in (9)
  • 0.188 in (11)
  • 0.189 in (11)
  • 0.192 in (4)
  • 0.193 in (4)
  • 0.195 in (8)
  • 0.197 in (3)
  • 0.202 in (3)
  • 0.213 in (3)
  • 0.217 in (3)
  • 0.219 in (3)
  • 0.237 in (3)
  • 0.25 in (3)
  • 0.255 in (3)
Cutting Width Min до Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (2)
  • 0.775 mm (2)
  • 0.8 mm (2)
  • 0.9 mm (2)
  • 1.0 mm (10)
  • 1.05 mm (2)
  • 1.201 mm (10)
  • 1.401 mm (2)
  • 1.475 mm (2)
  • 1.5 mm (10)
  • 1.55 mm (1)
  • 1.576 mm (10)
  • 1.701 mm (2)
  • 1.75 mm (10)
  • 1.826 mm (8)
  • 1.951 mm (2)
  • 1.975 mm (8)
  • 2.0 mm (10)
  • 2.2 mm (10)
  • 2.225 mm (10)
  • 2.25 mm (6)
  • 2.375 mm (4)
  • 2.401 mm (10)
  • 2.475 mm (8)
  • 2.5 mm (10)
  • 2.676 mm (8)
  • 2.75 mm (10)
  • 2.801 mm (8)
  • 3.0 mm (13)
  • 3.1 mm (8)
  • 3.176 mm (13)
  • 3.2 mm (13)
  • 3.25 mm (10)
  • 3.276 mm (2)
  • 3.325 mm (4)
  • 3.5 mm (13)
  • 3.6 mm (8)
  • 3.725 mm (1)
  • 3.801 mm (2)
  • 3.85 mm (2)
  • 3.95 mm (8)
  • 3.975 mm (4)
  • 4.0 mm (11)
  • 4.25 mm (11)
  • 4.3 mm (8)
  • 4.5 mm (11)
  • 4.525 mm (8)
  • 4.7 mm (9)
  • 4.775 mm (11)
  • 4.801 mm (11)
  • 4.875 mm (4)
  • 4.9 mm (4)
  • 4.95 mm (8)
  • 5.0 mm (3)
  • 5.125 mm (3)
  • 5.4 mm (3)
  • 5.5 mm (3)
  • 5.575 mm (3)
  • 6.0 mm (3)
  • 6.351 mm (3)
  • 6.476 mm (3)
Cutting Width Min до Cutting Width Max
Insert Size
Insert Size
  • 2 (2)
  • 3 (8)
  • 4 (3)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.138 in (2)
  • 0.21 in (8)
  • 0.294 in (3)
Maximum Cutting Depth Min до Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 3.5 mm (2)
  • 5.325 mm (8)
  • 7.476 mm (3)
Maximum Cutting Depth Min до Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (11)
  • B L (8)
  • C N (11)
  • D P (10)
  • H T (13)
  • H W (13)
backEnd
System Size
System Size
  • PSC63 (4)
No filters matching ""
Показать ассортимент в
Метрическая система
Дюймовая система

ОРИГИНАЛЬНЫЙ ПРОДУКТ

NE 90° NE 90°

Internal Cutting Units • Threading and Grooving
(13 Products)
  • Shank - PSCShank - PSC
  • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
Посмотреть ассортимент
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
6348920 PSC63S20HNEL2 PSC63S20HNEL2 20.0000 .7874 100.0000 3.937 63.8000 2.511 13.0000 .5118 24.5000 .9646 NG2R 1.01
    Цена по прейскуранту:
    $722.84 /каждый
    Ваша цена::
    6348916 PSC63S20HNER2 PSC63S20HNER2 20.0000 .7874 100.0000 3.937 63.8000 2.511 13.0000 .5118 24.0000 .9449 NG2L 1.01
      Цена по прейскуранту:
      $691.94 /каждый
      Ваша цена::
      4096061 PSC63S25JNEL3 PSC63S25JNEL3 25.0000 .9840 110.0000 4.330 83.2900 3.279 17.0000 .6693 34.0000 1.338 NG3R 1.10
        Цена по прейскуранту:
        $669.63 /каждый
        Ваша цена::
        4096060 PSC63S25JNER3 PSC63S25JNER3 25.0000 .9840 110.0000 4.330 83.2900 3.279 17.0000 .6693 34.0000 1.338 NG3L 1.10
          Цена по прейскуранту:
          $669.63 /каждый
          Ваша цена::
          6348915 PSC63S32GNEL3 PSC63S32GNEL3 32.0000 1.259 90.0000 3.543 62.0000 2.440 22.0000 .8661 38.5000 1.515 NG3R 1.11
            Цена по прейскуранту:
            $720.72 /каждый
            Ваша цена::
            6348913 PSC63S32GNER3 PSC63S32GNER3 32.0000 1.259 90.0000 3.543 62.0000 2.440 22.0000 .8661 38.5000 1.515 NG3L 1.11
              Цена по прейскуранту:
              $720.72 /каждый
              Ваша цена::
              4096073 PSC63S32KNEL3 PSC63S32KNEL3 32.0000 1.260 125.0000 4.921 99.3200 3.910 22.0000 .8661 40.0000 1.574 NG3R 1.34
                Цена по прейскуранту:
                $734.29 /каждый
                Ваша цена::
                4096062 PSC63S32KNER3 PSC63S32KNER3 32.0000 1.260 125.0000 4.921 99.3200 3.910 22.0000 .8661 40.0000 1.574 NG3L 1.34
                  Цена по прейскуранту:
                  $899.08 /каждый
                  Ваша цена::
                  6348914 PSC63S40JNER4 PSC63S40JNER4 40.0000 1.574 110.0000 4.330 80.0000 3.149 27.0000 1.063 48.0000 1.889 NG4L 1.50
                    Цена по прейскуранту:
                    $720.72 /каждый
                    Ваша цена::
                    6348943 PSC63S40LNEL3 PSC63S40LNEL3 40.0000 1.574 140.0000 5.511 105.6000 4.157 27.0000 1.063 48.5000 1.909 NG3R 1.84
                      Цена по прейскуранту:
                      $727.84 /каждый
                      Ваша цена::
                      6348944 PSC63S40LNEL4 PSC63S40LNEL4 40.0000 1.574 140.0000 5.511 111.0200 4.370 27.0000 1.063 48.5000 1.909 NG4R 1.78
                        Цена по прейскуранту:
                        $709.89 /каждый
                        Ваша цена::
                        6348912 PSC63S40LNER3 PSC63S40LNER3 40.0000 1.574 140.0000 5.511 105.6000 4.157 27.0000 1.063 48.0000 1.889 NG3L 1.84
                          Цена по прейскуранту:
                          $710.68 /каждый
                          Ваша цена::
                          6348945 PSC63S40LNER4 PSC63S40LNER4 40.0000 1.574 140.0000 5.511 111.0000 4.370 27.0000 1.063 48.0000 1.889 NG4L 1.79
                            Цена по прейскуранту:
                            $707.89 /каждый
                            Ваша цена::
                            Цена по прейскуранту:
                            Скидка: %
                            Ваша цена::
                            Замена Данный товар недоступен
                            Продукция для замены Данный товар можно приобрести у дистрибьютора
                            product-image
                            Please adjust the following properties from

                            Номер по каталогу ISO

                            Номер по каталогу ANSI

                            to find similar products.