New Customer
Are you new to WIDIA? Create an account and get started.
Create AccountRegistered Customer
Already have an account? Sign in.
Sign InSelected Account
There is an issue with your account. Please Contact Customer Service.
Sold-to
Change Account
Ship To Account
Change Account
New Customer
Are you new to WIDIA? Create an account and get started.
Create AccountRegistered Customer
Already have an account? Sign in.
Sign InSelected Account
There is an issue with your account. Please Contact Customer Service.
Sold-to
Change Account
Ship To Account
Change Account
successfully added to cart
View Cart
View Cart
Notifications
Mark all as read
M640 • Shell Mills • Metric
Shell Mills • Metric
Features and benefits
- Six cutting edges.
- Highly positive rake for low-power machines or light fixtures.
- Geometries and grades for all applications.
Uses and application
Milling - Side and Face
Face Milling
Milling - Through Coolant
Workpiece Materials
P
Steel
M
Stainless Steel
K
Cast Iron
N
Non-Ferrous
S
High-Temp Alloys
H
Hardened Materials
Filters and Columns
Filters
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
Workpiece Material
-
P Steel (6)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(6)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(6)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(6)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(6)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(6)
-
-
M Stainless Steel (6)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(6)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(6)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(6)
-
-
K Cast Iron (6)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(6)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(6)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(6)
-
-
N Non-Ferrous Materials (6)
-
N1Wrought Aluminum(6)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(6)
-
N3High-Silicon Aluminum Alloys Si >12.2%(6)
-
-
S High-Temp Alloys (6)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(6)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(6)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(6)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(6)
-
-
H Hardened Materials (6)
-
H1Hardened Materials 44-48 HRC(6)
-
H2Hardened Materials 48-55 HRC(6)
-
H3Hardened Materials 56-60 HRC(6)
-
Select All Star
-
CN (4)
-
DE (3)
Cutting Diameter
Cutting Diameter
-
1.969 in (1)
-
2.48 in (1)
-
3.15 in (1)
-
3.938 in (2)
-
4.921 in (1)
to
Cutting Diameter
Cutting Diameter
-
50.0 mm (1)
-
63.0 mm (1)
-
80.0 mm (1)
-
100.0 mm (2)
-
125.0 mm (1)
to
Maximum Cutting Diameter
Maximum Cutting Diameter
-
56.401 mm (1)
-
69.4 mm (1)
-
86.4 mm (1)
-
106.4 mm (2)
-
131.4 mm (1)
to
Maximum Cutting Diameter
Maximum Cutting Diameter
-
2.221 in (1)
-
2.732 in (1)
-
3.402 in (1)
-
4.189 in (2)
-
5.173 in (1)
to
Reach
Reach
-
1.575 in (2)
-
1.969 in (3)
-
2.48 in (1)
to
Reach
Reach
-
40.0 mm (2)
-
50.0 mm (3)
-
63.0 mm (1)
to
Connection Style
Connection Style
-
A-Socket Head Cap Screw (2)
-
B-Cutter Retention Screw (4)
Number of Flutes
Number of Flutes
-
10 (1)
-
4 (1)
-
5 (1)
-
6 (1)
-
7 (1)
-
8 (1)
Cutting Edges Per Insert
Cutting Edges Per Insert
-
3.0 (6)
-
6.0 (6)
to
Corner Radius
Corner Radius
-
0.035 in (6)
-
0.038 in (6)
to
Corner Radius
Corner Radius
-
0.9 mm (6)
-
0.976 mm (6)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
-
THM (6)
-
THM-U (6)
-
TN2510 (6)
-
TN5515 (6)
-
TN6501 (6)
-
TN6502 (6)
-
TN6510 (6)
-
TN6520 (6)
-
TN6525 (6)
-
TN6540 (6)
-
TN7525 (6)
-
TN7535 (6)
-
WK15CM (6)
-
WP25PM (6)
-
WP35CM (6)
-
WP40PM (6)
-
WS30PM (6)
-
WS40PM (6)
Back-End
Back-End Diameter
Back-End Diameter
-
22.0 mm (2)
-
27.0 mm (1)
-
32.0 mm (2)
-
40.0 mm (1)
to
Back-End Diameter
Back-End Diameter
-
0.866 in (2)
-
1.063 in (1)
-
1.26 in (2)
-
1.575 in (1)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1- 6
of 6 results
Metric
Inch
Show
Metric
Inch
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | First Choice | [D1] Effective Cutting Diameter | [D1] Effective Cutting Diameter | [D1MAX] Maximum Cutting Diameter | [D1MAX] Maximum Cutting Diameter | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [D6] Hub Diameter | [D6] Hub Diameter | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2263132 | 12395410200 | 12395410200 | W | 50.0000 | 1.968 | 56.4000 | 2.220 | 22.0 | .8661 | 47.0000 | 1.850 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$560.65
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2263154 | 12395410400 | 12395410400 | W | 63.0000 | 2.480 | 69.4000 | 2.732 | 22.0 | .8661 | 50.0000 | 1.968 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$579.67
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2263156 | 12395410600 | 12395410600 | W | 80.0000 | 3.149 | 86.4000 | 3.401 | 27.0 | 1.063 | 60.0000 | 2.362 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$697.90
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2263158 | 12395410800 | 12395410800 | W | 100.0000 | 3.937 | 106.4000 | 4.189 | 32.0 | 1.259 | 78.0000 | 3.070 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$820.64
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2263160 | 12395411000 | 12395411000 | W | 125.0000 | 4.921 | 131.4000 | 5.173 | 40.0 | 1.574 | 89.0000 | 3.503 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$1,035.08
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2263159 | 12395415800 | 12395415800 | W | 100.0000 | 3.937 | 106.4000 | 4.189 | 32.0 | 1.259 | 78.0000 | 3.070 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$1,037.80
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
Discount: %
Replacement
This item is no longer available
Replacement Product Please contact customer service for assistance
Replacement Product Please contact customer service for assistance
Qty
Sold in pkg. of
Grades
-
WP SteelS High-Temp AlloysH Hardened MaterialsK Cast IronM Stainless SteelN Non-Ferrous
Insert Selection Guide
| Grupa materiałowa | Obróbka lekka | Obróbka średnia | Obróbka ciężka | |||
| Geometria | Gatunek | Geometria | Gatunek | Geometria | Gatunek | |
| P1–P2 | .E..LD | WP40PM | .E..GD | WP40PM | .E..GD | WP40PM |
| P3–P4 | .E..LD | WP25PM | .E..GD | WS40PM | .E..GD | WS40PM |
| P5–P6 | .E..LD | WP25PM | .E..GD | WP25PM | .E..GD | WP25PM |
| M1–M2 | .E..LD | WP25PM | .E..GD | WP25PM | .E..GD | WP25PM |
| M3 | .E..LD | WP40PM | .E..GD | WS30PM | .E..GD | WS30PM |
| K1–K2 | .E..GD | TN6510 | .E..GD | WK15CM | .E..GD | WK15CM |
| K3 | .E..LD | TN6520 | .E..GD | WP25PM | .E..GD | WP25PM |
| N1–N2 | .E..LD | WS40PM | .E..GD | WS40PM | .E..GD | WS40PM |
| N3 | .E..LD | WS40PM | .E..GD | WS40PM | .E..GD | WS40PM |
Recommended Starting Feeds [mm]
| Geometria płytki | Zalecany posuw na ostrze (fz) zależny od % szerokości frezowania (ae) | Geometria płytki | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 100 % | ||||||||||||
| .F..LDAL | 0,13 | 0,34 | 0,47 | 0,10 | 0,25 | 0,34 | 0,07 | 0,18 | 0,25 | 0,06 | 0,16 | 0,22 | 0,06 | 0,15 | 0,20 | .F..LDAL |
| .E..LD | 0,13 | 0,34 | 0,47 | 0,10 | 0,25 | 0,34 | 0,07 | 0,18 | 0,25 | 0,06 | 0,16 | 0,22 | 0,06 | 0,15 | 0,20 | .E..LD |
| .E..GD | 0,13 | 0,48 | 0,54 | 0,10 | 0,35 | 0,39 | 0,07 | 0,26 | 0,29 | 0,06 | 0,23 | 0,25 | 0,06 | 0,21 | 0,23 | .E..GD |
| Obróbka lekka | Obróbka średnia | Obróbka ciężka |
Recommended Starting Feeds [IPT]
| Geometria płytki | Zalecany posuw na ostrze (fz) zależny od % szerokości frezowania (ae) | Geometria płytki | ||||||||||||||
| 5% | 10% | 20% | 30% | 40 100% | ||||||||||||
| .F..LDAL | .005 | .013 | .018 | .004 | .010 | .013 | .003 | .007 | .010 | .003 | .006 | .009 | .002 | .006 | .008 | .F..LDAL |
| .E..LD | .005 | .013 | .018 | .004 | .010 | .013 | .003 | .007 | .010 | .003 | .006 | .009 | .002 | .006 | .008 | .E..LD |
| .E..GD | .005 | .019 | .021 | .004 | .014 | .015 | .003 | .010 | .011 | .003 | .009 | .010 | .002 | .008 | .009 | .E..GD |
| Obróbka lekka | Obróbka średnia | Obróbka ciężka |
Recommended Starting Speeds [m/min]
| Grupa materiałowa | TN6510 | TN6520 | TN6525 | TN6540 | WK15CM | |||||||||||
| P | 1 | – | – | – | – | – | – | 410 | 320 | 280 | 360 | 280 | 240 | – | – | – |
| 2 | – | – | – | – | – | – | 320 | 250 | 215 | 250 | 190 | 170 | – | – | – | |
| 3 | – | – | – | – | – | – | 280 | 215 | 185 | 215 | 170 | 140 | – | – | – | |
| 4 | – | – | – | – | – | – | 235 | 170 | 145 | 180 | 130 | 110 | – | – | – | |
| 5 | – | – | – | – | – | – | 310 | 235 | 200 | 240 | 180 | 150 | – | – | – | |
| 6 | – | – | – | – | – | – | 205 | 160 | 130 | 160 | 120 | 100 | – | – | – | |
| M | 1 | – | – | – | – | – | – | 190 | 120 | 80 | 130 | 80 | 60 | – | – | – |
| 2 | – | – | – | – | – | – | 120 | 80 | 50 | 80 | 50 | 40 | – | – | – | |
| 3 | – | – | – | – | – | – | 125 | 80 | 55 | 85 | 50 | 40 | – | – | – | |
| K | 1 | 480 | 350 | 260 | 450 | 320 | 230 | 275 | 245 | 220 | 220 | 205 | 180 | 505 | 460 | 410 |
| 2 | 420 | 280 | 205 | 390 | 250 | 190 | 215 | 190 | 180 | 175 | 155 | 140 | 400 | 355 | 330 | |
| 3 | 335 | 260 | 200 | 300 | 230 | 160 | 180 | 160 | 145 | 155 | 145 | 125 | 335 | 300 | 275 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 50 | 35 | 30 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 25 | 20 | 10 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 70 | 40 | 30 | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 60 | 30 | 25 | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Grupa materiałowa | WP25PM | WP40PM | WS30PM | WS40PM | THM-U | THM | |||||||||||||
| P | 1 | 395 | 340 | 325 | 355 | 310 | 295 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 330 | 290 | 240 | 300 | 260 | 215 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 305 | 260 | 210 | 275 | 235 | 190 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | 270 | 220 | 180 | 245 | 205 | 160 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 5 | 220 | 205 | 180 | 205 | 185 | 160 | – | – | – | 205 | 175 | 145 | – | – | – | – | – | – | |
| 6 | 200 | 150 | 120 | 180 | 140 | 110 | – | – | – | 180 | 130 | 95 | – | – | – | – | – | – | |
| M | 1 | 245 | 215 | 200 | 235 | 205 | 185 | 270 | 240 | 220 | 250 | 205 | 170 | – | – | – | – | – | – |
| 2 | 220 | 190 | 155 | 210 | 180 | 150 | 245 | 215 | 175 | 215 | 175 | 145 | – | – | – | – | – | – | |
| 3 | 170 | 145 | 115 | 155 | 140 | 110 | 185 | 160 | 125 | 175 | 130 | 100 | – | – | – | – | – | – | |
| K | 1 | 275 | 245 | 220 | – | – | – | – | – | – | – | – | – | 230 | 205 | 180 | 145 | 110 | 90 |
| 2 | 215 | 190 | 180 | – | – | – | – | – | – | – | – | – | – | – | – | 150 | 120 | 85 | |
| 3 | 180 | 160 | 145 | – | – | – | – | – | – | – | – | – | – | – | – | 155 | 115 | 70 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 2400 | 1440 | 1200 | 1080 | 720 | 600 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 1640 | 980 | 800 | 820 | 560 | 460 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 960 | 600 | 480 | 540 | 335 | 240 | |
| S | 1 | 50 | 40 | 30 | 50 | 40 | 35 | 55 | 50 | 35 | 50 | 40 | 30 | – | – | – | – | – | – |
| 2 | 50 | 40 | 30 | 50 | 40 | 35 | 55 | 50 | 35 | 50 | 40 | 30 | – | – | – | – | – | – | |
| 3 | 60 | 50 | 30 | 60 | 50 | 35 | 65 | 55 | 35 | 60 | 50 | 30 | – | – | – | – | – | – | |
| 4 | 85 | 60 | 40 | 80 | 60 | 40 | 100 | 70 | 50 | 70 | 60 | 35 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
Recommended Starting Speeds [SFM]
| Grupa materiałowa | WK15CM | WP25PM | WP40PM | WS30PM | WS40PM | |||||||||||
| P | 1 | – | – | – | 1295 | 1120 | 1060 | 1165 | 1025 | 965 | – | – | – | 915 | 800 | 750 |
| 2 | – | – | – | 1080 | 940 | 785 | 985 | 845 | 710 | – | – | – | 770 | 670 | 555 | |
| 3 | – | – | – | 1000 | 845 | 690 | 905 | 770 | 630 | – | – | – | 705 | 605 | 490 | |
| 4 | – | – | – | 890 | 725 | 590 | 805 | 670 | 535 | – | – | – | 635 | 520 | 425 | |
| 5 | – | – | – | 725 | 670 | 590 | 670 | 610 | 535 | – | – | – | 520 | 455 | 425 | |
| 6 | – | – | – | 650 | 490 | 395 | 590 | 450 | 355 | – | – | – | 455 | 360 | 275 | |
| M | 1 | – | – | – | 805 | 710 | 650 | 770 | 670 | 610 | 890 | 785 | 725 | 850 | 620 | 375 |
| 2 | – | – | – | 725 | 630 | 510 | 690 | 590 | 490 | 805 | 710 | 570 | 750 | 555 | 340 | |
| 3 | – | – | – | 550 | 475 | 370 | 510 | 450 | 355 | 610 | 535 | 415 | 620 | 455 | 260 | |
| K | 1 | 1655 | 1520 | 1340 | 905 | 805 | 725 | – | – | – | – | – | – | – | – | – |
| 2 | 1320 | 1165 | 1080 | 710 | 630 | 590 | – | – | – | – | – | – | – | – | – | |
| 3 | 1105 | 985 | 905 | 590 | 535 | 475 | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 3525 | 3100 | 3100 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 3100 | 2870 | 2770 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 2870 | 2490 | 2490 | |
| S | 1 | – | – | – | 155 | 140 | 95 | 155 | 140 | 120 | 180 | 155 | 120 | 200 | 145 | 85 |
| 2 | – | – | – | 155 | 140 | 95 | 155 | 140 | 120 | 180 | 155 | 120 | 180 | 130 | 85 | |
| 3 | – | – | – | 200 | 155 | 95 | 200 | 155 | 120 | 215 | 180 | 120 | 205 | 150 | 95 | |
| 4 | – | – | – | 275 | 200 | 140 | 260 | 200 | 140 | 335 | 235 | 155 | 295 | 215 | 135 | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Grupa materiałowa | THM | THM-U | TN6510 | TN6520 | TN6525 | TN6540 | |||||||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 1340 | 1045 | 925 | 1180 | 925 | 785 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 1045 | 830 | 710 | 830 | 630 | 550 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 925 | 710 | 610 | 710 | 550 | 450 | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | 770 | 550 | 475 | 590 | 430 | 355 | |
| 5 | – | – | – | – | – | – | – | – | – | – | – | – | 1025 | 770 | 650 | 785 | 590 | 490 | |
| 6 | – | – | – | – | – | – | – | – | – | – | – | – | 670 | 535 | 430 | 535 | 395 | 335 | |
| M | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 630 | 395 | 260 | 430 | 260 | 200 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 395 | 260 | 155 | 260 | 155 | 140 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 415 | 260 | 180 | 275 | 155 | 140 | |
| K | 1 | 475 | 355 | 295 | 750 | 670 | 590 | 1570 | 1140 | 845 | 1475 | 1045 | 750 | 905 | 805 | 725 | 725 | 670 | 590 |
| 2 | 490 | 395 | 275 | – | – | – | 1380 | 925 | 670 | 1280 | 830 | 630 | 710 | 630 | 590 | 570 | 510 | 450 | |
| 3 | 510 | 370 | 235 | – | – | – | 1105 | 845 | 650 | 985 | 750 | 535 | 590 | 535 | 475 | 510 | 475 | 415 | |
| N | 1 | 3540 | 2365 | 1970 | 7870 | 4720 | 3935 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 2695 | 1830 | 1520 | 5370 | 3210 | 2615 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 1770 | 1105 | 785 | 3150 | 1970 | 1570 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 155 | 120 | 95 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 80 | 60 | 40 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 235 | 140 | 95 | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 200 | 95 | 80 | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |