COVID-19: How WIDIA is responding

M1200 (45°)

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (98)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (90)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (90)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (90)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (90)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (90)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (98)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (98)
  • M Stainless Steel (98)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (98)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (98)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (98)
  • K Cast Iron (101)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (101)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (100)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (100)
  • N Non-Ferrous Materials (59)
    • N1
      Wrought Aluminum
      (59)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (59)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (59)
  • S High-Temp Alloys (87)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (81)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (81)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (81)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (87)
  • H Hardened Materials (58)
    • H1
      Hardened Materials 44-48 HRC
      (58)
Select First Choice
  • DE (49)
  • IN (9)
  • US (40)
Applications
  • Face Milling Face Milling (49)
  • ID Thread Turning ID Thread Turning (70)
Cutting Diameter
  • 40.0 (4)
  • 50.0 (2)
  • 50.8 (2)
  • 63.0 (3)
  • 63.5 (3)
  • 76.2 (3)
  • 80.0 (3)
  • 100.0 (3)
  • 101.6 (6)
  • 125.0 (3)
  • 127.0 (3)
  • 152.4 (3)
  • 160.0 (2)
  • 200.0 (1)
  • 203.197 (1)
  • 203.2 (1)
  • 250.0 (1)
  • 254.0 (2)
  • 304.8 (2)
  • 315.0 (1)
to
Cutting Diameter
  • 1.5748 (2)
  • 1.575 (2)
  • 1.9685 (2)
  • 2.0 (2)
  • 2.48 (1)
  • 2.4803 (2)
  • 2.5 (3)
  • 3.0 (3)
  • 3.1496 (2)
  • 3.15 (1)
  • 3.937 (3)
  • 4.0 (6)
  • 4.921 (1)
  • 4.9213 (2)
  • 5.0 (3)
  • 6.0 (3)
  • 6.2992 (2)
  • 7.874 (1)
  • 8.0 (2)
  • 9.843 (1)
  • 10.0 (2)
  • 12.0 (2)
  • 12.402 (1)
to
Cutting Length
  • 0.172 (1)
  • 0.175 (1)
  • 0.176 (2)
  • 0.177 (44)
  • 0.178 (1)
to
Cutting Length
  • 4.4 (1)
  • 4.44 (1)
  • 4.5 (47)
to
Reach
  • 50.0 (2)
to
Reach
  • 1.969 (2)
to
Tool Cutting Edge Angle
  • 45.0 (49)
to
Cutting Edges Per Insert
  • 3.0 (57)
  • 12.0 (111)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 1.2 (100)
  • 1.6 (57)
  • 4.35 (60)
to
Corner Radius
  • 0.0469 (60)
  • 0.047 (62)
  • 0.0472 (76)
  • 0.063 (57)
  • 0.171 (53)
  • 0.1713 (56)
to
Application
Grade Of Cutting Tool
  • THM-U (50)
  • TN5515 (54)
  • TN6501 (50)
  • TN6510 (50)
  • TN6520 (57)
  • TN6525 (57)
  • TN6540 (57)
  • TN7535 (52)
  • WK15CM (53)
  • WK25YM (50)
  • WP25PM (56)
  • WP35CM (55)
  • WP40PM (56)
  • WS30PM (51)
  • WS40PM (57)
Wiper Insert
  • N (62)
  • Y (8)
Front-End
Insert Shape
  • H-HEXAGON 120 (119)
Insert Geometry
Shape
  • H-HEXAGON 120 (70)
Insert IC Size
  • 0.625 (56)
  • 0.6252 (14)
to
Insert IC Size
  • 15.875 (5)
  • 15.88 (65)
to
Cutting Edge Length
  • 0.334 (11)
  • 0.338 (14)
  • 0.3383 (36)
  • 0.361 (1)
  • 0.377 (8)
to
Cutting Edge Length
  • 8.495 (11)
  • 8.58 (24)
  • 8.593 (26)
  • 9.17 (1)
  • 9.6 (8)
to
Cutting Tool Material
  • C N (1)
  • H W (69)
Chip Breaker CBMD
  • GD (29)
  • HD (28)
  • LD (12)
Tolerance Class
  • E (1)
  • G (43)
  • P (26)
Back-End
Back-End Diameter
  • 0.75 (5)
  • 0.8661 (7)
  • 0.9843 (2)
  • 1.0 (3)
  • 1.063 (3)
  • 1.25 (3)
  • 1.2598 (3)
  • 1.5 (6)
  • 1.5748 (5)
  • 2.0 (3)
  • 2.3622 (3)
  • 2.5 (6)
to
Back-End Diameter
  • 19.05 (5)
  • 22.0 (7)
  • 25.0 (2)
  • 25.4 (3)
  • 27.0 (3)
  • 31.75 (3)
  • 32.0 (3)
  • 38.1 (6)
  • 40.0 (5)
  • 50.8 (3)
  • 60.0 (3)
  • 63.5 (6)
to
other
Grade
  • THM-U (1)
  • TN5515 (5)
  • TN6501 (1)
  • TN6510 (1)
  • TN6520 (8)
  • TN6525 (8)
  • TN6540 (8)
  • TN7535 (3)
  • WK15CM (4)
  • WK25YM (1)
  • WP25PM (7)
  • WP35CM (6)
  • WP40PM (7)
  • WS30PM (2)
  • WS40PM (8)
Platform
  • M1200 Series (109)
Tool Unit
  • I (96)
  • M (93)
Over All Length [L]
  • 39.878 (5)
  • 40.0 (7)
  • 44.45 (9)
  • 50.0 (6)
  • 60.45 (4)
  • 60.452 (6)
  • 63.0 (7)
  • 80.0 (1)
  • 80.01 (2)
  • 107.0 (2)
to
Over All Length [L]
  • 1.57 (5)
  • 1.5748 (4)
  • 1.575 (3)
  • 1.75 (9)
  • 1.9685 (4)
  • 1.969 (2)
  • 2.38 (10)
  • 2.48 (3)
  • 2.4803 (4)
  • 3.15 (3)
  • 4.213 (2)
to
Head Length [L2]
  • 50.0 (2)
to
Head Length [L2]
  • 1.969 (2)
to
Insert Hand
  • N (70)
No filters matching ""
View Products in
Metric
Inch
Face Mills • M1200

15° • 45° • 60° • Inserts • HNEW-AN
(1 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
5910033 HNEC0905ANSN HNEC535ANSN   WK25YM 12 15.8800 .6250 9.1700 .3610 5.5560 .2188 1.9500 .0770 1.2000 .0470 0.1900 .0075
    List price:
    Discount: %
    Your price::
    Replacement This item is not available
    Replacement Product This item may be available through a distributor
    Qty
    Face Mills • M1200

    15°/75° • 45°• 30°/60° Inserts • HNGJ-HD
    (12 Products)
    View Products
    SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
    6180292 HNGJ090543ANSNHD HNGJ53511ANSNHD   WS40PM 12 15.8800 .6250 8.4950 .3340 5.4400 .2140     4.3500 .1710 0.2000 .0079
      3563901 HNGJ0905ANSNHD HNGJ535ANSNHD   TN6525 12 15.8800 .6252 8.5930 .3383 5.4630 .2151 1.6550 .0651 1.2000 .0472 0.1700 .0069
        3563902 HNGJ0905ANSNHD HNGJ535ANSNHD   TN6540 12 15.8800 .6252 8.5930 .3383 5.4630 .2151 1.6550 .0651 1.2000 .0472 0.1700 .0069
          5895373 HNGJ0905ANSNHD HNGJ535ANSNHD   WP40PM 12 15.8800 .6252 8.5930 .3383 5.4630 .2151 1.6550 .0651 1.2000 .0472 0.1700 .0069
            5895371 HNGJ0905ANSNHD HNGJ535ANSNHD   WP25PM 12 15.8800 .6252 8.5930 .3383 5.4630 .2151 1.6550 .0651 1.2000 .0472 0.1700 .0069
              5895372 HNGJ0905ANSNHD HNGJ535ANSNHD   WP35CM 12 15.8800 .6252 8.5930 .3383 5.4630 .2151 1.6550 .0651 1.2000 .0472 0.1700 .0069
                List price:
                Discount: %
                Your price::
                Replacement This item is not available
                Replacement Product This item may be available through a distributor
                Qty
                Face Mills • M1200

                15°/75° • 45°• 30°/60° Inserts • HNGJ-LD
                (10 Products)
                View Products
                SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                3030034 HNGJ0905ANENLD HNGJ535ANENLD   TN6540 12 15.8800 .6250 8.5800 .3383 5.5600 .2190 1.8030 .0710 1.2000 .0472 0.0500 .0020
                  3093559 HNGJ0905ANENLD HNGJ535ANENLD   TN6520 12 15.8800 .6250 8.5800 .3383 5.5600 .2190 1.8030 .0710 1.2000 .0472 0.0500 .0020
                    5528973 HNGJ0905ANENLD HNGJ535ANENLD   WS30PM 12 15.8800 .6250 8.5800 .3383 5.5600 .2190 1.8030 .0710 1.2000 .0472 0.0500 .0020
                      5895346 HNGJ0905ANENLD HNGJ535ANENLD   WP25PM 12 15.8800 .6250 8.5800 .3383 5.5600 .2190 1.8030 .0710 1.2000 .0472 0.0500 .0020
                        5895348 HNGJ0905ANENLD HNGJ535ANENLD   WP40PM 12 15.8800 .6250 8.5800 .3383 5.5600 .2190 1.8030 .0710 1.2000 .0472 0.0500 .0020
                          5895347 HNGJ0905ANENLD HNGJ535ANENLD   WP35CM 12 15.8800 .6250 8.5800 .3383 5.5600 .2190 1.8030 .0710 1.2000 .0472 0.0500 .0020
                            List price:
                            Discount: %
                            Your price::
                            Replacement This item is not available
                            Replacement Product This item may be available through a distributor
                            Qty
                            Face Mills • M1200

                            15°/75° • 45°• 30°/60° Inserts • HNGJ-LDJ
                            (2 Products)
                            View Products
                            SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                            3606383 HNGJ0905ANFNLDJ HNGJ535ANFNLDJ   THM-U 12 15.8800 .6250 8.5800 .3380 5.5560 .2188 1.8000 .0710 1.2000 .0472 0.0200 .0008
                              3865373 HNGJ0905ANFNLDJ HNGJ535ANFNLDJ   TN6501 12 15.8800 .6250 8.5800 .3380 5.5560 .2188 1.8000 .0710 1.2000 .0472 0.0200 .0008
                                List price:
                                Discount: %
                                Your price::
                                Replacement This item is not available
                                Replacement Product This item may be available through a distributor
                                Qty
                                Face Mills • M1200

                                15°/75° • 45°• 30°/60° Inserts • HNGJ-GD
                                (11 Products)
                                View Products
                                SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                3093721 HNGJ0905ANSNGD HNGJ535ANSNGD   TN7535 12 15.8800 .6250 8.5930 .3383 5.5610 .2188 1.7140 .0675 1.2000 .0468 0.1000 .0039
                                  3037596 HNGJ0905ANSNGD HNGJ535ANSNGD   TN6540 12 15.8800 .6250 8.5930 .3383 5.5610 .2188 1.7140 .0675 1.2000 .0468 0.1000 .0039
                                    5427370 HNGJ0905ANSNGD HNGJ535ANSNGD   WK15CM 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.1000 .0039
                                      5528974 HNGJ0905ANSNGD HNGJ535ANSNGD   WS30PM 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.1000 .0039
                                        5895349 HNGJ0905ANSNGD HNGJ535ANSNGD   WP35CM 12 15.8800 .6250 8.5930 .3383 5.5610 .2188 1.7140 .0675 1.2000 .0468 0.1000 .0039
                                          5400965 HNGJ0905ANSNGD HNGJ535ANSNGD   WP25PM 12 15.8800 .6250 8.5930 .3383 5.5610 .2188 1.7140 .0675 1.2000 .0468 0.1000 .0039
                                            List price:
                                            Discount: %
                                            Your price::
                                            Replacement This item is not available
                                            Replacement Product This item may be available through a distributor
                                            Qty
                                            Face Mills • M1200

                                            15°/75° • 45°• 30°/60° Inserts • HNPJ-HD
                                            (16 Products)
                                            View Products
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                            5895378 HNPJ090543ANSNHD HNPJ53511ANSNHD   WP25PM 12 15.8800 .6250 8.4950 .3340 5.4400 .2142     4.3500 .1713 0.1300 .0051
                                              5895379 HNPJ090543ANSNHD HNPJ53511ANSNHD   WP35CM 12 15.8800 .6250 8.4950 .3340 5.4400 .2142     4.3500 .1713 0.1300 .0051
                                                5895380 HNPJ090543ANSNHD HNPJ53511ANSNHD   WP40PM 12 15.8800 .6250 8.4950 .3340 5.4400 .2142     4.3500 .1713 0.1300 .0051
                                                  6180294 HNPJ090543ANSNHD HNPJ53511ANSNHD   WS40PM 12 15.8800 .6250 8.4950 .3340 5.4400 .2142     4.3500 .1713 0.1300 .0051
                                                    6180279 HNPJ0905ANSNHD HNPJ535ANSNHD   WS40PM 12 15.8800 .6252 8.5930 .3383 5.4630 .2151 1.6550 .0651 1.2000 .0472 0.1800 .0071
                                                      3670842 HNPJ0905ANSNHD HNPJ535ANSNHD   TN6540 12 15.8800 .6252 8.5930 .3383 5.4630 .2151 1.6550 .0651 1.2000 .0472 0.1810 .0071
                                                        List price:
                                                        Discount: %
                                                        Your price::
                                                        Replacement This item is not available
                                                        Replacement Product This item may be available through a distributor
                                                        Qty
                                                        Face Mills • M1200

                                                        15°/75° • 45°• 30°/60° Inserts • HNPJ-GD
                                                        (10 Products)
                                                        View Products
                                                        SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                        3761188 HNPJ0905ANSNGD HNPJ535ANSNGD   TN7535 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.0990 .0039
                                                          5427372 HNPJ0905ANSNGD HNPJ535ANSNGD   WK15CM 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.0990 .0039
                                                            3761185 HNPJ0905ANSNGD HNPJ535ANSNGD   TN6520 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.0990 .0039
                                                              3761187 HNPJ0905ANSNGD HNPJ535ANSNGD   TN6540 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.0990 .0039
                                                                5550908 HNPJ0905ANSNGD HNPJ535ANSNGD   WP40PM 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.0990 .0039
                                                                  5895374 HNPJ0905ANSNGD HNPJ535ANSNGD   WP25PM 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.0990 .0039
                                                                    List price:
                                                                    Discount: %
                                                                    Your price::
                                                                    Replacement This item is not available
                                                                    Replacement Product This item may be available through a distributor
                                                                    Qty
                                                                    Face Mills • M1200

                                                                    45° • Shell Mills • Metric
                                                                    (21 Products)
                                                                    • Milling - Side and FaceMilling - Side and Face
                                                                    • Face MillingFace Milling
                                                                    • Milling - Through CoolantMilling - Through Coolant
                                                                    View Products
                                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
                                                                    3957970 M1200D040Z03HN09 M1200D040Z03HN09   40.0000 1.575 50.9600 2.006 22.0 .8661 39.0000 1.535 40.0000 1.575 4.4000 .1720 3 15800 Y 0.26
                                                                      3957971 M1200D040Z04HN09 M1200D040Z04HN09   40.0000 1.575 50.9600 2.006 22.0 .8661 39.0000 1.535 40.0000 1.575 4.4400 .1750 4 15800 Y 0.25
                                                                        3325312 M1200D050Z04HN09 M1200D050Z04HN09   50.0000 1.968 61.0000 2.401 22.0 .8661 38.0000 1.496 40.0000 1.574 4.5000 .1770 4 12700 Y 0.32
                                                                          3325693 M1200D050Z05HN09 M1200D050Z05HN09   50.0000 1.968 61.0000 2.401 22.0 .8661 38.0000 1.496 40.0000 1.574 4.5000 .1770 5 12700 Y 0.33
                                                                            3650535 M1200D063Z04HN09 M1200D063Z04HN09   63.0000 2.480 74.0000 2.913 22.0 .8661 50.0000 1.969 40.0000 1.575 4.5000 .1770 4 10100 Y 0.59
                                                                              3093594 M1200D063Z06HN09 M1200D063Z06HN09   63.0000 2.480 74.0000 2.913 22.0 .8661 50.0000 1.968 40.0000 1.574 4.5000 .1770 6 10100 Y 0.56
                                                                                List price:
                                                                                Discount: %
                                                                                Your price::
                                                                                Replacement This item is not available
                                                                                Replacement Product This item may be available through a distributor
                                                                                Qty
                                                                                Face Mills • M1200

                                                                                45° • Weldon® End Mills • Metric
                                                                                (2 Products)
                                                                                • Shank - Cylindrical  Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
                                                                                • Face MillingFace Milling
                                                                                • Milling - Through CoolantMilling - Through Coolant
                                                                                View Products
                                                                                SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
                                                                                3325311 M1200D040Z04B25HN09 M1200D040Z04B25HN09   40.0000 1.574 51.0000 2.008 25.0 .9843 107.0000 4.213 50.0000 1.969 4.5000 .1770 4 15800 Y 0.52
                                                                                  3325310 M1200D040Z03B25HN09 M1200D040Z03B25HN09   40.0000 1.574 51.0100 2.008 25.0 .9843 107.0000 4.213 50.0000 1.969 4.5000 .1770 3 15800 Y 0.53
                                                                                    List price:
                                                                                    Discount: %
                                                                                    Your price::
                                                                                    Replacement This item is not available
                                                                                    Replacement Product This item may be available through a distributor
                                                                                    Qty
                                                                                    Face Mills • M1200

                                                                                    45° • Shell Mills • Inch
                                                                                    (26 Products)
                                                                                    • Milling - Side and FaceMilling - Side and Face
                                                                                    • Face MillingFace Milling
                                                                                    • Milling - Through CoolantMilling - Through Coolant
                                                                                    View Products
                                                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D4] Bolt Circle 4 [D4] Bolt Circle 3 [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Pounds
                                                                                    3954508 M1200D1000Z20S250HN09 M1200D1000Z20S250HN09   254.0000 10.000 264.9920 10.433 63.5 2.5 101.6000 4.000 180.8500 7.120 60.4500 2.380 4.5000 .1770 20 2510 Y 24.52
                                                                                      3323871 M1200D200Z04S075HN09 M1200D200Z04S075HN09   50.8000 2.000 61.8000 2.434 19.05 .75     44.4500 1.750 39.8780 1.570 4.5000 .1770 4 12500 Y 0.81
                                                                                        3323872 M1200D200Z05S075HN09 M1200D200Z05S075HN09   50.8000 2.000 61.8000 2.434 19.05 .75     44.4500 1.750 39.8780 1.570 4.5000 .1770 5 12500 Y 0.82
                                                                                          3650540 M1200D300Z05S100HN09 M1200D300Z05S100HN09   76.2000 3.000 87.2000 3.433 25.4 1.0     55.6010 2.189 44.4500 1.750 4.5000 .1770 5 8300 Y 1.86
                                                                                            3323875 M1200D300Z06S100HN09 M1200D300Z06S100HN09   76.2000 3.000 87.2000 3.433 25.4 1.0     55.6000 2.189 44.4500 1.750 4.5000 .1770 6 8300 Y 1.79
                                                                                              3650541 M1200D400Z06S125HN09 M1200D400Z06S125HN09   101.6000 4.000 112.5800 4.432 31.75 1.25     69.1490 2.722 44.4500 1.750 4.5000 .1770 6 6300 Y 3.17
                                                                                                List price:
                                                                                                Discount: %
                                                                                                Your price::
                                                                                                Replacement This item is not available
                                                                                                Replacement Product This item may be available through a distributor
                                                                                                Qty
                                                                                                Face Mills • M1200

                                                                                                45° • Inserts • XNGJ-GD3 Wiper
                                                                                                (8 Products)
                                                                                                View Products
                                                                                                SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                                                                5622622 XNGJ0905ANSNGD3W XNGJ535ANSNGD3W   WK15CM 3 15.8800 .6250 9.6000 .3770 5.5090 .2169 6.0000 .2300 1.6000 .0630 0.0940 .0037
                                                                                                  5895381 XNGJ0905ANSNGD3W XNGJ535ANSNGD3W   WP25PM 3 15.8800 .6250 9.6000 .3770 5.5090 .2169 6.0000 .2300 1.6000 .0630 0.0940 .0037
                                                                                                    3066479 XNGJ0905ANSNGD3W XNGJ535ANSNGD3W   TN6540 3 15.8800 .6250 9.6000 .3770 5.5090 .2169 6.0000 .2300 1.6000 .0630 0.0940 .0037
                                                                                                      3117962 XNGJ0905ANSNGD3W XNGJ535ANSNGD3W   TN6510 3 15.8800 .6250 9.6000 .3770 5.5090 .2169 6.0000 .2300 1.6000 .0630 0.0940 .0037
                                                                                                        3524707 XNGJ0905ANSNGD3W XNGJ535ANSNGD3W   TN6520 3 15.8800 .6250 9.6000 .3770 5.5090 .2169 6.0000 .2300 1.6000 .0630 0.0940 .0037
                                                                                                          5895382 XNGJ0905ANSNGD3W XNGJ535ANSNGD3W   WP40PM 3 15.8800 .6250 9.6000 .3770 5.5090 .2169 6.0000 .2300 1.6000 .0630 0.0940 .0037
                                                                                                            List price:
                                                                                                            Discount: %
                                                                                                            Your price::
                                                                                                            Replacement This item is not available
                                                                                                            Replacement Product This item may be available through a distributor
                                                                                                            Qty
                                                                                                            If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                                                                                            You are about to create a duplicate . Do you want to proceed?
                                                                                                            You are about to delete Do you want to proceed?
                                                                                                            What would you like to rename your to?
                                                                                                            Please enter a valid name
                                                                                                            Please enter a name for the duplicate
                                                                                                            Please enter a valid name
                                                                                                            You are about to add to your My Solutions page. Do you want to proceed?
                                                                                                            Please enter a valid name
                                                                                                            Send a copy of

                                                                                                            Please enter a valid Email
                                                                                                            Please enter a valid name

                                                                                                            We have found the following CAD Drawings

                                                                                                            Select the files you are looking for and download them all at once

                                                                                                            You should be logged to see your dashboard information
                                                                                                            The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                                                                            item(s) successfully added to the cart
                                                                                                            View Cart